WORK STATION CRANEDIMENSIONAL INFORMATION

www.gorbel.comPhone: (585) 924-6262

Toll Free Phone: (800) 821-0086© 2014 Gorbel Inc. All Rights Reserved

®

INSTALLATION GUIDELINESCAPACITY SERIES WEIGHT

PER FOOTMAX.

L1MAX.

L2MAX.

L5MAX.

L9

250#GLC

GLCSAL

GLCSL

2.53#4.92#4.05#8.43#

6’20’20’25’

8”48”30”48”

18”18”48”18”

18”48”48”48”

500#

GLCGLCS

ALGLCSL

GLCSLX

4.15#7.44#4.87#

10.71#11.01#

6’20’20’25’30’

8”48”30”48”48”

24”24”48”24”24”

20”48”48”48”48”

1000#

GLCGLCS

ALGLCSL

GLCSLX

6.22#12.25#8.36#

14.08#17.47#

6’20’20’25’30’

8”48”30”48”48”

24”24”48”24”24”

20”48”48”48”48”

2000#

GLCGLCS

ALGLCSL

GLCSLX

9.12#16.89#10.01#19.36#20.13#

6’20’20’25’30’

8”48”30”48”48”

24”24”48”24”24”

24”48”48”48”48”

4000#GLC

GLCSGLCSL

GLCSLX

9.12#20.68#26.21#28.22#

4’20’25’30’

8”48”48”48”

24”24”24”24”

24”48”48”48”

L1 = MAXIMUM HANGER CENTERLINE Maximum Hanger Centerline is considered from the center of a hanger to the center of the neighboring hanger.

L2 = SPLICE JOINT CENTERLINE TO HANGER CENTERLINE Splice Joint Centerline to Hanger Centerline is considered from the center of a splice joint to the center of the nearest hanger.

L4 = BRIDGE SPAN Bridge Span is considered from centerline to centerline of runways. L4 = Bridge Overall Length - (2 x Bridge Can lever)

L5 = BRIDGE CANTILEVER** Bridge Can lever is considered from the centerline of the runway to the end of the bridge.

L9 = MAXIMUM RUNWAY CANTILEVER Runway Can lever is considered from the center of the end hanger to the end of the runway.

Note: Same guidelines apply for Monorails (GLMS, GLMSL, GLMSLX, ALM), with the excep on of the “L5” dimension (not applicable).Note: Typical L5 in 12”. Max L5 may not be achievable (dependent on truss design of bridge).

Note: Depending on track series, an -kick-up end trucks may be required for the following: bridges with ≤ 8’ span (L4) and a bridge can lever (L5) ≥ 12” bridges with < 10’ span (L4) and a bridge can lever (L5) > 15” bridges with < 15’ span (L4) and a bridge can lever (L5) > 18”

*An -kick-up end trucks are not included as part of the standard crane kits.****2000# Ceiling Mounted systems and Monorails at 10’ span (L4) and bridge can lever (L5) 15” need an -kick-up end trucks.Consult Gorbel® factory for informa on on bridges greater than 15’ span (L4).

Bridge Series

Bridge Overall LengthSteel

≤ 23’ 28’ 29’ 33’ 34’250500

100020004000

12”12”12”12”15”

18”18”18”18”18”

24”24”24”24”24”

na18”18”18”18”

na24”24”24”24”

STAN

DARD

BRI

DGE

CAN

TILE

VER

Bridge Series

Bridge Overall LengthSteel

≤ 20’ 23’ 28’ 29’ 33’ 34’250500

100020004000

12”12”12”12”15”

18”18”18”18”18”

18”18”18”18”18”

na24”24”24”24”

na18”18”18”18”

na24”24”24”24”

1

L1

L1

L9

L2

L4

L5

L1

L1

L2

L4L5

L9

Note: For Bridge OALs between lengths shown, round up to the larger legnths. Maximum L5 may bot be achievable (dependant on truss design of bridge). The maximum L5 dimension using AL series rail does not pertain to coped aluminum bridges.

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ESFREE STANDING WORK STATION BRIDGE CRANES

STEEL RUNWAYS WITH STEEL OR ALUMINUM BRIDGEISOMETRIC VIEW

2

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)

Trolley Saddle Height: (TS)

L1: Are the number of support assemblies provided suffi cient?(See “SUPPORT” column on dimensional chart pages)

C: inches (hoist by others)

Gorbel® Free Standing Work Sta on Crane kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and aluminum systems), festoon stack-up sec on, splice joints and hanger brackets.

Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

L1

L1

L7

RUNWAY LENGTHBRIDGE LENGTH (L)

**CS(CLEAR SPAN)

*OAW(OVERALL WIDTH)

OAH(OVERALL HEIGHT)

TS

STEEL TRACK BRIDGEON

STEEL RUNWAYS

ALUMINUM TRACK BRIDGEON

STEEL RUNWAYS

* (4000# SYSTEMS ONLY)THE HEADER WELDMENT LOCATED AT THE TOP OF THE SUPPORT COLUMNS IS THE WIDEST PART OF THE SYSTEM.

**CS = BRIDGE LENGTH (L) + 4”

L1

L1

L7

RUNWAY LENGTHBRIDGE LENGTH (L)

**CS(CLEAR SPAN)

*OAW(OVERALL WIDTH)

OAH(OVERALL HEIGHT) TS

D

D+6

D+3

D+3

COLUMN BASE DETAILFOR 3” COLUMNS

D

13”

10”

10”

COLUMN BASE DETAILFOR 6” & 7” COLUMNS

D

D+6

D+3 3/8

D+3 3/8

COLUMN BASE DETAILFOR 4” & 5” COLUMNS

FREE

STA

ND

ING

WO

RK

STAT

ION

CR

AN

ESFREE STANDING WORK STATION BRIDGE CRANESALUMINUM RUNWAYS WITH ALUMINUM BRIDGE

ISOMETRIC VIEW

3

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)

Trolley Saddle Height: (TS)

L1: Are the number of support assemblies provided suffi cient?(See “SUPPORT” column on dimensional chart pages)

C: inches (hoist by others)

Gorbel® Free Standing Work Sta on Crane kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and aluminum systems), festoon stack-up sec on, splice joints and hanger brackets.

Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

L1

L1

L7

RUNWAY LENGTH

BRIDGE LENGTH (L)

**CS(CLEAR SPAN)

*OAW(OVERALL WIDTH)

OAH(OVERALL HEIGHT) TS

ALUMINUM TRACK BRIDGEON

ALUMINUM RUNWAYS

D

D+6

D+3D+3

COLUMN BASE DETAIL3” COLUMNS

**CS = BRIDGE LENGTH (L) + 4

D

D+6

D+3 3/8D+3 3/8

COLUMN BASE DETAIL4” & 5” COLUMNS

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ESFREE STANDING WORK STATION BRIDGE CRANES

STEEL RUNWAYS WITH STEEL OR ALUMINUM BRIDGE

4

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)

Trolley Saddle Height: (TS)

L1: Are the number of support assemblies provided suffi cient?(See “SUPPORT” column on dimensional chart pages)

C: inches (hoist by others)

Gorbel® Free Standing Work Sta on Crane kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and aluminum systems), festoon stack-up sec on, splice joints and hanger brackets.

Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

STEEL TRACK BRIDGE ON STEEL RUNWAYS

END VIEW

TS

*OAH

L3

L5**

HOIST TROLLEY

CS

H4 CL6

L5**

H3

*OAH INCLUDES ALL HARDWARE

ALUMINUM TRACK BRIDGE ON STEEL RUNWAYS

END VIEW

TS

*OAHL3

L5**

HOIST TROLLEY

CS

H4 C L6

L5**

H3A

*OAH INCLUDES ALL HARDWARE

COPED ALUMINUM TRACK BRIDGE ON STEEL RUNWAYS

END VIEW

TS

*OAH

L3

L5**

HOIST TROLLEY

CS

H4 C L6

L5**

SEE NOTE

*OAH INCLUDES ALL HARDWARETo fi nd OAH when using an Alumium bridge:

(H3A - H3) + OAH steel bridge

Note: 250 SERIES = H3A - 3.25” 500 SERIES = H3A - 5.12”1000 SERIES = H3A2000 SERIES = H3A4000 SERIES = H3A

D+6”

D+6”

D+3 3/8”

D+3 3/8”

BASE BOLT PATTERNFOR 4” & 5” COLUMNS

D+6”

D+6”

D+3”

D+3”

BASE BOLT PATTERNFOR 3” COLUMNS 4X Ø1”

HOLE

4X Ø1” HOLE

13”

13”

10”

10”

BASE BOLT PATTERNFOR 6” & 7” COLUMNS 4X Ø1”

HOLE

L8

L1

RUNWAY LENGTH48” MAXENDTRUCK

L1

D

L7L8

SPLICE JOINT AND PLATE

BRIDGE SPAN (L4)**

BRIDGE LENGTH

(L) OAW

SIDE VIEW

TOP VIEW

FREE STANDING WORK STATION BRIDGE CRANESALUMINUM BRIDGE ON ALUMINUM RUNWAYS

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)

Trolley Saddle Height: (TS)

L1: Are the number of support assemblies provided suffi cient?(See “SUPPORT” column on dimensional chart pages)

C: inches (hoist by others)

Gorbel® Free Standing Work Sta on Crane kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and aluminum systems), festoon stack-up sec on, splice joints and hanger brackets.

Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE

STA

ND

ING

WO

RK

STAT

ION

CR

AN

ES

5

ALUMINUM TRACK BRIDGE

END VIEW

TS*OAH

L3

L5**

HOIST TROLLEY

CS

H4 C L6

L5**

H3

*OAH INCLUDES ALL HARDWARE

COPED ALUMINUM TRACK BRIDGE

END VIEW

TS*OAH

L3

L5**

HOIST TROLLEY

CS

H4 C L6

L5**

SEE NOTE BELOW

*OAH INCLUDES ALL HARDWARE

Note: 250 SERIES = H3 - 3.25” 500 SERIES = H3 - 5.12”1000 SERIES = H32000 SERIES = H34000 SERIES = H3

D+6”

D+6”

D+3 3/8”

D+3 3/8”

BASE BOLT PATTERNFOR 4” & 5” COLUMNS

D+6”

D+6”

D+3”

D+3”

BASE BOLT PATTERNFOR 3” COLUMNS 4X Ø1”

HOLE

4X Ø1” HOLE

L8

L1

RUNWAY LENGTH

48” MAXENDTRUCK

L1

D

L7L8

SPLICE JOINTS

BRIDGE SPAN (L4)**

BRIDGE LENGTH

(L) OAW

SIDE VIEW

TOP VIEW

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTURE

MAX. L1

L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

10’

11’-6”10’12’14’

GLCS-FS-250-10 (S or AL)-11.5-10GLCS-FS-250-10 (S or AL)-11.5-12GLCS-FS-250-10 (S or AL)-11.5-14

SteelSteelSteel

20’20’20’

999

10 3/410 3/410 3/4

12 7/812 7/812 7/8

20 5/820 5/820 5/8

4 3/44 3/44 3/4

5 1/85 1/85 1/8

8 3/48 3/48 3/4

11’-4”11’-4”11’-4”

11’-5 3/8”13’-5 3/8”15’-5 3/8”

333

222

23’

10’10’12’12’14’14’

GLCS-FS-250-10 (S or AL)-23-10AL-FS-250-10-23-10

GLCS-FS-250-10 (S or AL)-23-12AL-FS-250-10-23-12

GLCS-FS-250-10 (S or AL)-23-14AL-FS-250-10-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

4 3/410 3/44 3/4

10 3/44 3/4

10 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

8 3/416 7/88 3/4

16 7/88 3/4

16 7/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

222222

28’10’12’14’

GLCSL-FS-250-10 (S or AL)-28-10GLCSL-FS-250-10 (S or AL)-28-12GLCSL-FS-250-10 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

4 3/44 3/44 3/4

5 1/85 1/85 1/8

8 3/48 3/48 3/4

11’-4”11’-4”11’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

222

33’

10’10’12’12’14’14’

GLCS-FS-250-10 (S or AL)-33-10AL-FS-250-10-33-10

GLCS-FS-250-10 (S or AL)-33-12AL-FS-250-10-33-12

GLCS-FS-250-10 (S or AL)-33-14AL-FS-250-10-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

4 3/410 3/44 3/4

10 3/44 3/4

10 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

8 3/416 7/88 3/4

16 7/88 3/4

16 7/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

43’

10’10’12’12’14’14’

GLCS-FS-250-10 (S or AL)-43-10AL-FS-250-10-43-10

GLCS-FS-250-10 (S or AL)-43-12AL-FS-250-10-43-12

GLCS-FS-250-10 (S or AL)-43-14AL-FS-250-10-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

4 3/410 3/44 3/4

10 3/44 3/4

10 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

8 3/416 7/88 3/4

16 7/88 3/4

16 7/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-10 (S or AL)-53-10AL-FS-250-10-53-10

GLCSL-FS-250-10 (S or AL)-53-10GLCS-FS-250-10 (S or AL)-53-12

AL-FS-250-10-53-12GLCSL-FS-250-10 (S or AL)-53-12GLCS-FS-250-10 (S or AL)-53-14

AL-FS-250-10-53-14GLCSL-FS-250-10 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

4 3/410 3/44 3/44 3/4

10 3/44 3/44 3/4

10 3/44 3/4

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

8 3/416 7/88 3/48 3/4

16 7/88 3/48 3/4

16 7/88 3/4

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

443443443

63’

10’10’12’12’14’14’

GLCS-FS-250-10 (S or AL)-63-10AL-FS-250-10-63-10

GLCS-FS-250-10 (S or AL)-63-12AL-FS-250-10-63-12

GLCS-FS-250-10 (S or AL)-63-14AL-FS-250-10-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

4 3/410 3/44 3/4

10 3/44 3/4

10 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

8 3/416 7/88 3/4

16 7/88 3/4

16 7/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

444444

78’10’12’14’

GLCSL-FS-250-10 (S or AL)-78-10GLCSL-FS-250-10 (S or AL)-78-12GLCSL-FS-250-10 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

4 3/44 3/44 3/4

5 1/85 1/85 1/8

15 1/815 1/815 1/8

11’-4”11’-4”11’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

444

83’

10’10’12’12’14’14’

GLCS-FS-250-10 (S or AL)-83-10AL-FS-250-10-83-10

GLCS-FS-250-10 (S or AL)-83-12AL-FS-250-10-83-12

GLCS-FS-250-10 (S or AL)-83-14AL-FS-250-10-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

4 3/410 3/44 3/4

10 3/44 3/4

10 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

15 1/816 7/815 1/816 7/815 1/816 7/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

555555

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-10 (S or AL)-103-10AL-FS-250-10-103-10

GLCSL-FS-250-10 (S or AL)-103-10GLCS-FS-250-10 (S or AL)-103-12

AL-FS-250-10-103-12GLCSL-FS-250-10 (S or AL)-103-12GLCS-FS-250-10 (S or AL)-103-14

AL-FS-250-10-103-14GLCSL-FS-250-10 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

4 3/410 3/44 3/44 3/4

10 3/44 3/44 3/4

10 3/44 3/4

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

15 1/816 7/815 1/815 1/816 7/815 1/815 1/816 7/815 1/8

11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”11’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

665665665

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

6

250# CAPACITY

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTURE

MAX. L1

L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

15’

23’

10’10’12’12’14’14’

GLCS-FS-250-15 (S or AL)-23-10AL-FS-250-15-23-10

GLCS-FS-250-15 (S or AL)-23-12AL-FS-250-15-23-12

GLCS-FS-250-15 (S or AL)-23-14AL-FS-250-15-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

11 1/423 5/811 1/423 5/811 1/423 5/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

222222

28’10’12’14’

GLCSL-FS-250-15 (S or AL)-28-10GLCSL-FS-250-15 (S or AL)-28-12GLCSL-FS-250-15 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

11 1/411 1/411 1/4

16’-4”16’-4”16’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

222

33’

10’10’12’12’14’14’

GLCS-FS-250-15 (S or AL)-33-10AL-FS-250-15-33-10

GLCS-FS-250-15 (S or AL)-33-12AL-FS-250-15-33-12

GLCS-FS-250-15 (S or AL)-33-14AL-FS-250-15-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

11 1/423 5/811 1/423 5/811 1/423 5/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

43’

10’10’12’12’14’14’

GLCS-FS-250-15 (S or AL)-43-10AL-FS-250-15-43-10

GLCS-FS-250-15 (S or AL)-43-12AL-FS-250-15-43-12

GLCS-FS-250-15 (S or AL)-43-14AL-FS-250-15-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

112611261126

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

11 1/423 5/811 1/423 5/811 1/423 5/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-15 (S or AL)-53-10AL-FS-250-15-53-10

GLCSL-FS-250-15 (S or AL)-53-10GLCS-FS-250-15 (S or AL)-53-12

AL-FS-250-15-53-12GLCSL-FS-250-15 (S or AL)-53-12GLCS-FS-250-15 (S or AL)-53-14

AL-FS-250-15-53-14GLCSL-FS-250-15 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

11 1/423 5/811 1/411 1/423 5/811 1/411 1/423 5/811 1/4

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

443443443

63’

10’10’12’12’14’14’

GLCS-FS-250-15 (S or AL)-63-10AL-FS-250-15-63-10

GLCS-FS-250-15 (S or AL)-63-12AL-FS-250-15-63-12

GLCS-FS-250-15 (S or AL)-63-14AL-FS-250-15-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

153615361536

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

11 1/423 5/811 1/423 5/811 1/423 5/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

444444

78’10’12’14’

GLCSL-FS-250-15 (S or AL)-78-10GLCSL-FS-250-15 (S or AL)-78-12GLCSL-FS-250-15 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

21 7/821 7/821 7/8

16’-4”16’-4”16’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

444

83’

10’10’12’12’14’14’

GLCS-FS-250-15 (S or AL)-83-10AL-FS-250-15-83-10

GLCS-FS-250-15 (S or AL)-83-12AL-FS-250-15-83-12

GLCS-FS-250-15 (S or AL)-83-14AL-FS-250-15-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

21 7/823 5/821 7/823 5/821 7/823 5/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

555555

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-15 (S or AL)-103-10AL-FS-250-15-103-10

GLCSL-FS-250-15 (S or AL)-103-10GLCS-FS-250-15 (S or AL)-103-12

AL-FS-250-15-103-12GLCSL-FS-250-15 (S or AL)-103-12GLCS-FS-250-15 (S or AL)-103-14

AL-FS-250-15-103-14GLCSL-FS-250-15 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

21 7/823 5/821 7/821 7/823 5/821 7/821 7/823 5/821 7/8

16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”16’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

665665665

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

250# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

7

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTURE

MAX. L1

L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

20’

23’

10’10’12’12’14’14’

GLCS-FS-250-20 (S or AL)-23-10AL-FS-250-20-23-10

GLCS-FS-250-20 (S or AL)-23-12AL-FS-250-20-23-12

GLCS-FS-250-20 (S or AL)-23-14AL-FS-250-20-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/227

19 1/227

19 1/227

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

222222

28’10’12’14’

GLCSL-FS-250-20 (S or AL)-28-10GLCSL-FS-250-20 (S or AL)-28-12GLCSL-FS-250-20 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

19 1/219 1/219 1/2

21’-4”21’-4”21’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

222

33’

10’10’12’12’14’14’

GLCS-FS-250-20 (S or AL)-33-10AL-FS-250-20-33-10

GLCS-FS-250-20 (S or AL)-33-12AL-FS-250-20-33-12

GLCS-FS-250-20 (S or AL)-33-14AL-FS-250-20-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/227

19 1/227

19 1/227

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

43’

10’10’12’12’14’14’

GLCS-FS-250-20 (S or AL)-43-10AL-FS-250-20-43-10

GLCS-FS-250-20 (S or AL)-43-12AL-FS-250-20-43-12

GLCS-FS-250-20 (S or AL)-43-14AL-FS-250-20-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

112611261126

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/227

19 1/227

19 1/227

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-20 (S or AL)-53-10AL-FS-250-20-53-10

GLCSL-FS-250-20 (S or AL)-53-10GLCS-FS-250-20 (S or AL)-53-12

AL-FS-250-20-53-12GLCSL-FS-250-20 (S or AL)-53-12GLCS-FS-250-20 (S or AL)-53-14

AL-FS-250-20-53-14GLCSL-FS-250-20 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

19 1/227

19 1/219 1/2

2719 1/219 1/2

2719 1/2

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

443443443

63’

10’10’12’12’14’14’

GLCS-FS-250-20 (S or AL)-63-10AL-FS-250-20-63-10

GLCS-FS-250-20 (S or AL)-63-12AL-FS-250-20-63-12

GLCS-FS-250-20 (S or AL)-63-14AL-FS-250-20-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

153615361536

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/227

19 1/227

19 1/227

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

444444

78’10’12’14’

GLCSL-FS-250-20 (S or AL)-78-10GLCSL-FS-250-20 (S or AL)-78-12GLCSL-FS-250-20 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

25 1/425 1/425 1/4

21’-4”21’-4”21’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

444

83’

10’10’12’12’14’14’

GLCS-FS-250-20 (S or AL)-83-10AL-FS-250-20-83-10

GLCS-FS-250-20 (S or AL)-83-12AL-FS-250-20-83-12

GLCS-FS-250-20 (S or AL)-83-14AL-FS-250-20-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

25 1/427

25 1/427

25 1/427

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

555555

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-20 (S or AL)-103-10AL-FS-250-20-103-10

GLCSL-FS-250-20 (S or AL)-103-10GLCS-FS-250-20 (S or AL)-103-12

AL-FS-250-20-103-12GLCSL-FS-250-20 (S or AL)-103-12GLCS-FS-250-20 (S or AL)-103-14

AL-FS-250-20-103-14GLCSL-FS-250-20 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

25 1/427

25 1/425 1/4

2725 1/425 1/4

2725 1/4

21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”21’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

665665665

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

8

250# CAPACITY

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTURE

MAX. L1

L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

23’

23’

10’10’12’12’14’14’

GLCS-FS-250-23 (S or AL)-23-10AL-FS-250-23-23-10

GLCS-FS-250-23 (S or AL)-23-12AL-FS-250-23-23-12

GLCS-FS-250-23 (S or AL)-23-14AL-FS-250-23-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/230 3/819 1/230 3/819 1/230 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

222222

28’10’12’14’

GLCSL-FS-250-23 (S or AL)-28-10GLCSL-FS-250-23 (S or AL)-28-12GLCSL-FS-250-23 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

19 1/219 1/219 1/2

24’-4”24’-4”24’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

222

33’

10’10’12’12’14’14’

GLCS-FS-250-23 (S or AL)-33-10AL-FS-250-23-33-10

GLCS-FS-250-23 (S or AL)-33-12AL-FS-250-23-33-12

GLCS-FS-250-23 (S or AL)-33-14AL-FS-250-23-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/230 3/819 1/230 3/819 1/230 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

43’

10’10’12’12’14’14’

GLCS-FS-250-23 (S or AL)-43-10AL-FS-250-23-43-10

GLCS-FS-250-23 (S or AL)-43-12AL-FS-250-23-43-12

GLCS-FS-250-23 (S or AL)-43-14AL-FS-250-23-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

112611261126

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/230 3/819 1/230 3/819 1/230 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-23 (S or AL)-53-10AL-FS-250-23-53-10

GLCSL-FS-250-23 (S or AL)-53-10GLCS-FS-250-23 (S or AL)-53-12

AL-FS-250-23-53-12GLCSL-FS-250-23 (S or AL)-53-12GLCS-FS-250-23 (S or AL)-53-14

AL-FS-250-23-53-14GLCSL-FS-250-23 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

19 1/230 3/819 1/219 1/230 3/819 1/219 1/230 3/819 1/2

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

443443443

63’

10’10’12’12’14’14’

GLCS-FS-250-23 (S or AL)-63-10AL-FS-250-23-63-10

GLCS-FS-250-23 (S or AL)-63-12AL-FS-250-23-63-12

GLCS-FS-250-23 (S or AL)-63-14AL-FS-250-23-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

153615361536

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

19 1/230 3/819 1/230 3/819 1/230 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

444444

78’10’12’14’

GLCSL-FS-250-23 (S or AL)-78-10GLCSL-FS-250-23 (S or AL)-78-12GLCSL-FS-250-23 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

10 3/410 3/410 3/4

14 7/814 7/814 7/8

22 5/822 5/822 5/8

10 1/210 1/210 1/2

5 1/85 1/85 1/8

30 3/830 3/830 3/8

24’-4”24’-4”24’-4”

11’-7 3/8”13’-7 3/8”15’-7 3/8”

333

444

83’

10’10’12’12’14’14’

GLCS-FS-250-23 (S or AL)-83-10AL-FS-250-23-83-10

GLCS-FS-250-23 (S or AL)-83-12AL-FS-250-23-83-12

GLCS-FS-250-23 (S or AL)-83-14AL-FS-250-23-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

10 3/413 1/410 3/413 1/410 3/413 1/4

12 7/820

12 7/820

12 7/820

20 5/8-

20 5/8-

20 5/8-

10 1/210 3/410 1/210 3/410 1/210 3/4

5 1/87 1/45 1/87 1/45 1/87 1/4

30 3/830 3/830 3/830 3/830 3/830 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”13’-5 3/8”14’-0 1/2”15’-5 3/8”16’-0 1/2”

333333

555555

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-23 (S or AL)-103-10AL-FS-250-23-103-10

GLCSL-FS-250-23 (S or AL)-103-10GLCS-FS-250-23 (S or AL)-103-12

AL-FS-250-23-103-12GLCSL-FS-250-23 (S or AL)-103-12GLCS-FS-250-23 (S or AL)-103-14

AL-FS-250-23-103-14GLCSL-FS-250-23 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

10 3/413 1/410 3/410 3/413 1/410 3/410 3/413 1/410 3/4

12 7/820

14 7/812 7/8

2014 7/812 7/8

2014 7/8

20 5/8-

22 5/820 5/8

-22 5/820 5/8

-22 5/8

10 1/210 3/410 1/210 1/210 3/410 1/210 1/210 3/410 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

30 3/830 3/830 3/830 3/830 3/830 3/830 3/830 3/830 3/8

24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”24’-4”

11’-5 3/8”12’-0 1/2”11’-7 3/8”13’-5 3/8”14’-0 1/2”13’-7 3/8”15’-5 3/8”16’-0 1/2”15’-7 3/8”

333333333

665665665

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

250# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

9

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTURE

MAX. L1

L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

28’

23’

10’10’12’12’14’14’

GLCS-FS-250-28 (S or AL)-23-10AL-FS-250-28-23-10

GLCS-FS-250-28 (S or AL)-23-12AL-FS-250-28-23-12

GLCS-FS-250-28 (S or AL)-23-14AL-FS-250-28-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

21 3/423 3/821 3/423 3/821 3/423 3/8

15 1/424 3/815 1/424 3/815 1/424 3/8

25 1/4-

25 1/4-

25 1/4-

12 1/212 5/812 1/212 5/812 1/212 5/8

5 1/87 1/45 1/87 1/45 1/87 1/4

28 1/237 1/828 1/237 1/828 1/237 1/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”13’-8 3/4”14’-5 7/8”15’-8 3/4”16’-5 7/8”

333333

222222

28’10’12’14’

GLCSL-FS-250-28 (S or AL)-28-10GLCSL-FS-250-28 (S or AL)-28-12GLCSL-FS-250-28 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

21 3/421 3/421 3/4

17 1/417 1/417 1/4

27 1/427 1/427 1/4

12 1/212 1/212 1/2

5 1/85 1/85 1/8

28 1/228 1/228 1/2

29’-4”29’-4”29’-4”

11’-10 3/4”13’-10 3/4”15’-10 3/4”

333

222

33’

10’10’12’12’14’14’

GLCS-FS-250-28 (S or AL)-33-10AL-FS-250-28-33-10

GLCS-FS-250-28 (S or AL)-33-12AL-FS-250-28-33-12

GLCS-FS-250-28 (S or AL)-33-14AL-FS-250-28-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

21 3/423 3/821 3/423 3/821 3/423 3/8

15 1/424 3/815 1/424 3/815 1/424 3/8

25 1/4-

25 1/4-

25 1/4-

12 1/212 5/812 1/212 5/812 1/212 5/8

5 1/87 1/45 1/87 1/45 1/87 1/4

28 1/237 1/828 1/237 1/828 1/237 1/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”13’-8 3/4”14’-5 7/8”15’-8 3/4”16’-5 7/8”

333333

333333

43’

10’10’12’12’14’14’

GLCS-FS-250-28 (S or AL)-43-10AL-FS-250-28-43-10

GLCS-FS-250-28 (S or AL)-43-12AL-FS-250-28-43-12

GLCS-FS-250-28 (S or AL)-43-14AL-FS-250-28-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

112611261126

21 3/423 3/821 3/423 3/821 3/423 3/8

15 1/424 3/815 1/424 3/815 1/424 3/8

25 1/4-

25 1/4-

25 1/4-

12 1/212 5/812 1/212 5/812 1/212 5/8

5 1/87 1/45 1/87 1/45 1/87 1/4

28 1/237 1/828 1/237 1/828 1/237 1/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”13’-8 3/4”14’-5 7/8”15’-8 3/4”16’-5 7/8”

333333

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-28 (S or AL)-53-10AL-FS-250-28-53-10

GLCSL-FS-250-28 (S or AL)-53-10GLCS-FS-250-28 (S or AL)-53-12

AL-FS-250-28-53-12GLCSL-FS-250-28 (S or AL)-53-12GLCS-FS-250-28 (S or AL)-53-14

AL-FS-250-28-53-14GLCSL-FS-250-28 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

21 3/423 3/821 3/421 3/423 3/821 3/421 3/423 3/821 3/4

15 1/424 3/817 1/415 1/424 3/817 1/415 1/424 3/817 1/4

25 1/4-

27 1/425 1/4

-27 1/425 1/4

-27 1/4

12 1/212 5/812 1/212 1/212 5/812 1/212 1/212 5/812 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

28 1/237 1/828 1/228 1/237 1/828 1/228 1/237 1/828 1/2

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”

11’-10 3/4”13’-8 3/4”14’-5 7/8”

13’-10 3/4”15’-8 3/4”16’-5 7/8”

15’-10 3/4”

333333333

443443443

63’

10’10’12’12’14’14’

GLCS-FS-250-28 (S or AL)-63-10AL-FS-250-28-63-10

GLCS-FS-250-28 (S or AL)-63-12AL-FS-250-28-63-12

GLCS-FS-250-28 (S or AL)-63-14AL-FS-250-28-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

153615361536

21 3/423 3/821 3/423 3/821 3/423 3/8

15 1/424 3/815 1/424 3/815 1/424 3/8

25 1/4-

25 1/4-

25 1/4-

12 1/212 5/812 1/212 5/812 1/212 5/8

5 1/87 1/45 1/87 1/45 1/87 1/4

35 3/837 1/835 3/837 1/835 3/837 1/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”13’-8 3/4”14’-5 7/8”15’-8 3/4”16’-5 7/8”

333333

444444

78’10’12’14’

GLCSL-FS-250-28 (S or AL)-78-10GLCSL-FS-250-28 (S or AL)-78-12GLCSL-FS-250-28 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

21 3/421 3/421 3/4

17 1/417 1/417 1/4

27 1/427 1/427 1/4

12 1/212 1/212 1/2

5 1/85 1/85 1/8

35 3/835 3/835 3/8

29’-4”29’-4”29’-4”

11’-10 3/4”13’-10 3/4”15’-10 3/4”

333

444

83’

10’10’12’12’14’14’

GLCS-FS-250-28 (S or AL)-83-10AL-FS-250-28-83-10

GLCS-FS-250-28 (S or AL)-83-12AL-FS-250-28-83-12

GLCS-FS-250-28 (S or AL)-83-14AL-FS-250-28-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

21 3/423 3/821 3/423 3/821 3/423 3/8

15 1/424 3/815 1/424 3/815 1/424 3/8

25 1/4-

25 1/4-

25 1/4-

12 1/212 5/812 1/212 5/812 1/212 5/8

5 1/87 1/45 1/87 1/45 1/87 1/4

35 3/837 1/835 3/837 1/835 3/837 1/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”13’-8 3/4”14’-5 7/8”15’-8 3/4”16’-5 7/8”

333333

555555

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-250-28 (S or AL)-103-10AL-FS-250-28-103-10

GLCSL-FS-250-28 (S or AL)-103-10GLCS-FS-250-28 (S or AL)-103-12

AL-FS-250-28-103-12GLCSL-FS-250-28 (S or AL)-103-12GLCS-FS-250-28 (S or AL)-103-14

AL-FS-250-28-103-14GLCSL-FS-250-28 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

21 3/423 3/821 3/421 3/423 3/821 3/421 3/423 3/821 3/4

15 1/424 3/817 1/415 1/424 3/817 1/415 1/424 3/817 1/4

25 1/4-

27 1/425 1/4

-27 1/425 1/4

-27 1/4

12 1/212 5/812 1/212 1/212 5/812 1/212 1/212 5/812 1/2

5 1/87 1/45 1/85 1/87 1/45 1/85 1/87 1/45 1/8

35 3/837 1/835 3/835 3/837 1/835 3/835 3/837 1/835 3/8

29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”29’-4”

11’-8 3/4”12’-5 7/8”

11’-10 3/4”13’-8 3/4”14’-5 7/8”

13’-10 3/4”15’-8 3/4”16’-5 7/8”

15’-10 3/4”

333333333

665665665

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

10

250# CAPACITY

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

10’

11’-6”10’12’14’

GLCS-FS-500-10 (S or AL)-11.5-10GLCS-FS-500-10 (S or AL)-11.5-12GLCS-FS-500-10 (S or AL)-11.5-14

SteelSteelSteel

20’20’20’

999

13 1/813 1/813 1/8

16 1/216 1/216 1/2

242424

6 5/86 5/86 5/8

7 1/87 1/87 1/8

10 1/210 1/210 1/2

11’-4”11’-6”11’-6”

11’-9”13’-9”15’-9”

344

222

23’

10’10’12’12’14’14’

GLCS-FS-500-10 (S or AL)-23-10AL-FS-500-10-23-10

GLCS-FS-500-10 (S or AL)-23-12AL-FS-500-10-23-12

GLCS-FS-500-10 (S or AL)-23-14AL-FS-500-10-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

6 5/812 5/86 5/8

12 5/86 5/8

12 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

10 1/216 7/810 1/216 7/810 1/216 7/8

11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

222222

28’10’12’14’

GLCSL-FS-500-10 (S or AL)-28-10GLCSL-FS-500-10 (S or AL)-28-12GLCSL-FS-500-10 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

10 1/210 1/210 1/2

11’-4”11’-6”11’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

222

33’

10’10’12’12’14’14’

GLCS-FS-500-10 (S or AL)-33-10AL-FS-500-10-33-10

GLCS-FS-500-10 (S or AL)-33-12AL-FS-500-10-33-12

GLCS-FS-500-10 (S or AL)-33-14AL-FS-500-10-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

6 5/812 5/86 5/8

12 5/86 5/8

12 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

10 1/216 7/810 1/216 7/810 1/216 7/8

11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

34’10’12’14’

GLCSLX-FS-500-10 (S or AL)-34-10GLCSLX-FS-500-10 (S or AL)-34-12GLCSLX-FS-500-10 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

10 1/210 1/210 1/2

11’-4”11’-6”11’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

222

43’

10’10’12’12’14’14’

GLCS-FS-500-10 (S or AL)-43-10AL-FS-500-10-43-10

GLCS-FS-500-10 (S or AL)-43-12AL-FS-500-10-43-12

GLCS-FS-500-10 (S or AL)-43-14AL-FS-500-10-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

112611261126

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

6 5/812 5/86 5/8

12 5/86 5/8

12 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

10 1/216 7/810 1/216 7/810 1/216 7/8

11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-10 (S or AL)-53-10AL-FS-500-10-53-10

GLCSL-FS-500-10 (S or AL)-53-10GLCS-FS-500-10 (S or AL)-53-12

AL-FS-500-10-53-12GLCSL-FS-500-10 (S or AL)-53-12GLCS-FS-500-10 (S or AL)-53-14

AL-FS-500-10-53-14GLCSL-FS-500-10 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

6 5/812 5/86 5/86 5/8

12 5/86 5/86 5/8

12 5/86 5/8

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

10 1/216 7/810 1/210 1/216 7/810 1/210 1/216 7/810 1/2

11’-4”11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-10 (S or AL)-63-10AL-FS-500-10-63-10

GLCS-FS-500-10 (S or AL)-63-12AL-FS-500-10-63-12

GLCS-FS-500-10 (S or AL)-63-14AL-FS-500-10-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

153615361536

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

6 5/812 5/86 5/8

12 5/86 5/8

12 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

10 1/216 7/810 1/216 7/810 1/216 7/8

11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

444444

64’10’12’14’

GLCSLX-FS-500-10 (S or AL)-64-10GLCSLX-FS-500-10 (S or AL)-64-12GLCSLX-FS-500-10 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

16 7/816 7/816 7/8

11’-4”11’-6”11’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

333

78’10’12’14’

GLCSL-FS-500-10 (S or AL)-78-10GLCSL-FS-500-10 (S or AL)-78-12GLCSL-FS-500-10 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

16 7/816 7/816 7/8

11’-4”11’-6”11’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

444

83’

10’10’12’12’14’14’

GLCS-FS-500-10 (S or AL)-83-10AL-FS-500-10-83-10

GLCS-FS-500-10 (S or AL)-83-12AL-FS-500-10-83-12

GLCS-FS-500-10 (S or AL)-83-14AL-FS-500-10-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

6 5/812 5/86 5/8

12 5/86 5/8

12 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

16 7/816 7/816 7/816 7/816 7/816 7/8

11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

555555

94’10’12’14’

GLCSLX-FS-500-10 (S or AL)-94-10GLCSLX-FS-500-10 (S or AL)-94-12GLCSLX-FS-500-10 (S or AL)-94-14

SteelSteelSteel

30’30’30’

535353

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

16 7/816 7/816 7/8

11’-4”11’-6”11’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-10 (S or AL)-103-10AL-FS-500-10-103-10

GLCSL-FS-500-10 (S or AL)-103-10GLCS-FS-500-10 (S or AL)-103-12

AL-FS-500-10-103-12GLCSL-FS-500-10 (S or AL)-103-12GLCS-FS-500-10 (S or AL)-103-14

AL-FS-500-10-103-14GLCSL-FS-500-10 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

6 5/812 5/86 5/86 5/8

12 5/86 5/86 5/8

12 5/86 5/8

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

16 7/816 7/816 7/816 7/816 7/816 7/816 7/816 7/816 7/8

11’-4”11’-4”11’-4”11’-6”11’-6”11’-6”11’-6”11’-6”11’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

665665665

124’10’12’14’

GLCSLX-FS-500-10 (S or AL)-124-10GLCSLX-FS-500-10 (S or AL)-124-12GLCSLX-FS-500-10 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

6 5/86 5/86 5/8

7 1/87 1/87 1/8

16 7/816 7/816 7/8

11’-4”11’-6”11’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

500# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

11

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

12

500# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

15’

23’

10’10’12’12’14’14’

GLCS-FS-500-15 (S or AL)-23-10AL-FS-500-15-23-10

GLCS-FS-500-15 (S or AL)-23-12AL-FS-500-15-23-12

GLCS-FS-500-15 (S or AL)-23-14AL-FS-500-15-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/423 5/821 3/423 5/821 3/423 5/8

16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

222222

28’10’12’14’

GLCSL-FS-500-15 (S or AL)-28-10GLCSL-FS-500-15 (S or AL)-28-12GLCSL-FS-500-15 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

16’-4”16’-6”16’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

222

33’

10’10’12’12’14’14’

GLCS-FS-500-15 (S or AL)-33-10AL-FS-500-15-33-10

GLCS-FS-500-15 (S or AL)-33-12AL-FS-500-15-33-12

GLCS-FS-500-15 (S or AL)-33-14AL-FS-500-15-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/423 5/821 3/423 5/821 3/423 5/8

16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

34’10’12’14’

GLCSLX-FS-500-15 (S or AL)-34-10GLCSLX-FS-500-15 (S or AL)-34-12GLCSLX-FS-500-15 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

16’-4”16’-6”16’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

222

43’

10’10’12’12’14’14’

GLCS-FS-500-15 (S or AL)-43-10AL-FS-500-15-43-10

GLCS-FS-500-15 (S or AL)-43-12AL-FS-500-15-43-12

GLCS-FS-500-15 (S or AL)-43-14AL-FS-500-15-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/423 5/821 3/423 5/821 3/423 5/8

16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-15 (S or AL)-53-10AL-FS-500-15-53-10

GLCSL-FS-500-15 (S or AL)-53-10GLCS-FS-500-15 (S or AL)-53-12

AL-FS-500-15-53-12GLCSL-FS-500-15 (S or AL)-53-12GLCS-FS-500-15 (S or AL)-53-14

AL-FS-500-15-53-14GLCSL-FS-500-15 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

21 3/423 5/821 3/421 3/423 5/821 3/421 3/423 5/821 3/4

16’-4”16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-15 (S or AL)-63-10AL-FS-500-15-63-10

GLCS-FS-500-15 (S or AL)-63-12AL-FS-500-15-63-12

GLCS-FS-500-15 (S or AL)-63-14AL-FS-500-15-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/423 5/821 3/423 5/821 3/423 5/8

16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

444444

64’10’12’14’

GLCSLX-FS-500-15 (S or AL)-64-10GLCSLX-FS-500-15 (S or AL)-64-12GLCSLX-FS-500-15 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

23 5/823 5/823 5/8

16’-4”16’-6”16’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

333

78’10’12’14’

GLCSL-FS-500-15 (S or AL)-78-10GLCSL-FS-500-15 (S or AL)-78-12GLCSL-FS-500-15 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

23 5/823 5/823 5/8

16’-4”16’-6”16’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

444

83’

10’10’12’12’14’14’

GLCS-FS-500-15 (S or AL)-83-10AL-FS-500-15-83-10

GLCS-FS-500-15 (S or AL)-83-12AL-FS-500-15-83-12

GLCS-FS-500-15 (S or AL)-83-14AL-FS-500-15-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

23 5/823 5/823 5/823 5/823 5/823 5/8

16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

555555

94’10’12’14’

GLCSLX-FS-500-15 (S or AL)-94-10GLCSLX-FS-500-15 (S or AL)-94-12GLCSLX-FS-500-15 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

23 5/823 5/823 5/8

16’-4”16’-6”16’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-15 (S or AL)-103-10AL-FS-500-15-103-10

GLCSL-FS-500-15 (S or AL)-103-10GLCS-FS-500-15 (S or AL)-103-12

AL-FS-500-15-103-12GLCSL-FS-500-15 (S or AL)-103-12GLCS-FS-500-15 (S or AL)-103-14

AL-FS-500-15-103-14GLCSL-FS-500-15 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

23 5/823 5/823 5/823 5/823 5/823 5/823 5/823 5/823 5/8

16’-4”16’-4”16’-4”16’-6”16’-6”16’-6”16’-6”16’-6”16’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

665665665

124’10’12’14’

GLCSLX-FS-500-15 (S or AL)-124-10GLCSLX-FS-500-15 (S or AL)-124-12GLCSLX-FS-500-15 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

23 5/823 5/823 5/8

16’-4”16’-6”16’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

20’

23’

10’10’12’12’14’14’

GLCS-FS-500-20 (S or AL)-23-10AL-FS-500-20-23-10

GLCS-FS-500-20 (S or AL)-23-12AL-FS-500-20-23-12

GLCS-FS-500-20 (S or AL)-23-14AL-FS-500-20-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/427

21 3/427

21 3/427

21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

222222

28’10’12’14’

GLCSL-FS-500-20 (S or AL)-28-10GLCSL-FS-500-20 (S or AL)-28-12GLCSL-FS-500-20 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

21’-4”21’-6”21’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

222

33’

10’10’12’12’14’14’

GLCS-FS-500-20 (S or AL)-33-10AL-FS-500-20-33-10

GLCS-FS-500-20 (S or AL)-33-12AL-FS-500-20-33-12

GLCS-FS-500-20 (S or AL)-33-14AL-FS-500-20-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/427

21 3/427

21 3/427

21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

34’10’12’14’

GLCSLX-FS-500-20 (S or AL)-34-10GLCSLX-FS-500-20 (S or AL)-34-12GLCSLX-FS-500-20 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

21’-4”21’-6”21’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

222

43’

10’10’12’12’14’14’

GLCS-FS-500-20 (S or AL)-43-10AL-FS-500-20-43-10

GLCS-FS-500-20 (S or AL)-43-12AL-FS-500-20-43-12

GLCS-FS-500-20 (S or AL)-43-14AL-FS-500-20-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/427

21 3/427

21 3/427

21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-20 (S or AL)-53-10AL-FS-500-20-53-10

GLCSL-FS-500-20 (S or AL)-53-10GLCS-FS-500-20 (S or AL)-53-12

AL-FS-500-20-53-12GLCSL-FS-500-20 (S or AL)-53-12GLCS-FS-500-20 (S or AL)-53-14

AL-FS-500-20-53-14GLCSL-FS-500-20 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

21 3/427

21 3/421 3/4

2721 3/421 3/4

2721 3/4

21’-4”21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-20 (S or AL)-63-10AL-FS-500-20-63-10

GLCS-FS-500-20 (S or AL)-63-12AL-FS-500-20-63-12

GLCS-FS-500-20 (S or AL)-63-14AL-FS-500-20-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/427

21 3/427

21 3/427

21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

444444

64’10’12’14’

GLCSLX-FS-500-20 (S or AL)-64-10GLCSLX-FS-500-20 (S or AL)-64-12GLCSLX-FS-500-20 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

272727

21’-4”21’-6”21’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

333

78’10’12’14’

GLCSL-FS-500-20 (S or AL)-78-10GLCSL-FS-500-20 (S or AL)-78-12GLCSL-FS-500-20 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

272727

21’-4”21’-6”21’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

444

83’

10’10’12’12’14’14’

GLCS-FS-500-20 (S or AL)-83-10AL-FS-500-20-83-10

GLCS-FS-500-20 (S or AL)-83-12AL-FS-500-20-83-12

GLCS-FS-500-20 (S or AL)-83-14AL-FS-500-20-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

272727272727

21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

555555

94’10’12’14’

GLCSLX-FS-500-20 (S or AL)-94-10GLCSLX-FS-500-20 (S or AL)-94-12GLCSLX-FS-500-20 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

272727

21’-4”21’-6”21’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-20 (S or AL)-103-10AL-FS-500-20-103-10

GLCSL-FS-500-20 (S or AL)-103-10GLCS-FS-500-20 (S or AL)-103-12

AL-FS-500-20-103-12GLCSL-FS-500-20 (S or AL)-103-12GLCS-FS-500-20 (S or AL)-103-14

AL-FS-500-20-103-14GLCSL-FS-500-20 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

272727272727272727

21’-4”21’-4”21’-4”21’-6”21’-6”21’-6”21’-6”21’-6”21’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

665665665

124’10’12’14’

GLCSLX-FS-500-20 (S or AL)-124-10GLCSLX-FS-500-20 (S or AL)-124-12GLCSLX-FS-500-20 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

272727

21’-4”21’-6”21’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

500# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

13

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

14

500# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

23’

23’

10’10’12’12’14’14’

GLCS-FS-500-23 (S or AL)-23-10AL-FS-500-23-23-10

GLCS-FS-500-23 (S or AL)-23-12AL-FS-500-23-23-12

GLCS-FS-500-23 (S or AL)-23-14AL-FS-500-23-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/430 3/821 3/430 3/821 3/430 3/8

24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

222222

28’10’12’14’

GLCSL-FS-500-23 (S or AL)-28-10GLCSL-FS-500-23 (S or AL)-28-12GLCSL-FS-500-23 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

24’-4”24’-6”24’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

222

33’

10’10’12’12’14’14’

GLCS-FS-500-23 (S or AL)-33-10AL-FS-500-23-33-10

GLCS-FS-500-23 (S or AL)-33-12AL-FS-500-23-33-12

GLCS-FS-500-23 (S or AL)-33-14AL-FS-500-23-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/430 3/821 3/430 3/821 3/430 3/8

24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

34’10’12’14’

GLCSLX-FS-500-23 (S or AL)-34-10GLCSLX-FS-500-23 (S or AL)-34-12GLCSLX-FS-500-23 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

21 3/421 3/421 3/4

24’-4”24’-6”24’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

222

43’

10’10’12’12’14’14’

GLCS-FS-500-23 (S or AL)-43-10AL-FS-500-23-43-10

GLCS-FS-500-23 (S or AL)-43-12AL-FS-500-23-43-12

GLCS-FS-500-23 (S or AL)-43-14AL-FS-500-23-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/430 3/821 3/430 3/821 3/430 3/8

24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-23 (S or AL)-53-10AL-FS-500-23-53-10

GLCSL-FS-500-23 (S or AL)-53-10GLCS-FS-500-23 (S or AL)-53-12

AL-FS-500-23-53-12GLCSL-FS-500-23 (S or AL)-53-12GLCS-FS-500-23 (S or AL)-53-14

AL-FS-500-23-53-14GLCSL-FS-500-23 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

21 3/430 3/821 3/421 3/430 3/821 3/421 3/430 3/821 3/4

24’-4”24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-23 (S or AL)-63-10AL-FS-500-23-63-10

GLCS-FS-500-23 (S or AL)-63-12AL-FS-500-23-63-12

GLCS-FS-500-23 (S or AL)-63-14AL-FS-500-23-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

21 3/430 3/821 3/430 3/821 3/430 3/8

24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

444444

64’10’12’14’

GLCSLX-FS-500-23 (S or AL)-64-10GLCSLX-FS-500-23 (S or AL)-64-12GLCSLX-FS-500-23 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

30 3/830 3/830 3/8

24’-4”24’-6”24’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

333

78’10’12’14’

GLCSL-FS-500-23 (S or AL)-78-10GLCSL-FS-500-23 (S or AL)-78-12GLCSL-FS-500-23 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

13 1/813 1/813 1/8

18 7/818 7/818 7/8

26 3/826 3/826 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

30 3/830 3/830 3/8

24’-4”24’-6”24’-6”

11’-11 3/8”13’-11 3/8”15’-11 3/8”

344

444

83’

10’10’12’12’14’14’

GLCS-FS-500-23 (S or AL)-83-10AL-FS-500-23-83-10

GLCS-FS-500-23 (S or AL)-83-12AL-FS-500-23-83-12

GLCS-FS-500-23 (S or AL)-83-14AL-FS-500-23-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

13 1/813 1/413 1/813 1/413 1/813 1/4

16 1/223 7/816 1/223 7/816 1/223 7/8

24-

24-

24-

12 3/412 5/812 3/412 5/812 3/412 5/8

7 1/87 1/47 1/87 1/47 1/87 1/4

30 3/830 3/830 3/830 3/830 3/830 3/8

24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

13’-9”14’-4 3/8”

15’-9”16’-4 3/8”

334444

555555

94’10’12’14’

GLCSLX-FS-500-23 (S or AL)-94-10GLCSLX-FS-500-23 (S or AL)-94-12GLCSLX-FS-500-23 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

30 3/830 3/830 3/8

24’-4”24’-6”24’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-23 (S or AL)-103-10AL-FS-500-23-103-10

GLCSL-FS-500-23 (S or AL)-103-10GLCS-FS-500-23 (S or AL)-103-12

AL-FS-500-23-103-12GLCSL-FS-500-23 (S or AL)-103-12GLCS-FS-500-23 (S or AL)-103-14

AL-FS-500-23-103-14GLCSL-FS-500-23 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

13 1/813 1/413 1/813 1/813 1/413 1/813 1/813 1/413 1/8

16 1/223 7/818 7/816 1/223 7/818 7/816 1/223 7/818 7/8

24-

26 3/824-

26 3/824-

26 3/8

12 3/412 5/812 3/412 3/412 5/812 3/412 3/412 5/812 3/4

7 1/87 1/47 1/87 1/87 1/47 1/87 1/87 1/47 1/8

30 3/830 3/830 3/830 3/830 3/830 3/830 3/830 3/830 3/8

24’-4”24’-4”24’-4”24’-6”24’-6”24’-6”24’-6”24’-6”24’-6”

11’-9”12’-4 3/8”

11’-11 3/8”13’-9”

14’-4 3/8”13’-11 3/8”

15’-9”16’-4 3/8”

15’-11 3/8”

333444444

665665665

124’10’12’14’

GLCSLX-FS-500-23 (S or AL)-124-10GLCSLX-FS-500-23 (S or AL)-124-12GLCSLX-FS-500-23 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

13 1/813 1/813 1/8

20 7/820 7/820 7/8

28 3/828 3/828 3/8

12 3/412 3/412 3/4

7 1/87 1/87 1/8

30 3/830 3/830 3/8

24’-4”24’-6”24’-6”

12’-1 3/8”14’-1 3/8”16’-1 3/8”

344

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

28’

23’

10’10’12’12’14’14’

GLCS-FS-500-28 (S or AL)-23-10AL-FS-500-28-23-10

GLCS-FS-500-28 (S or AL)-23-12AL-FS-500-28-23-12

GLCS-FS-500-28 (S or AL)-23-14AL-FS-500-28-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

23 1/423 3/823 1/423 3/823 1/423 3/8

18 3/822 5/818 3/822 5/818 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

15 1/813 1/815 1/813 1/815 1/813 1/8

7 1/87 7/87 1/87 7/87 1/87 7/8

31 1/437 1/831 1/437 1/831 1/437 1/8

29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”

13’-11 7/8”14’-4 1/8”

15’-11 7/8”16’-4 1/8”

334444

222222

28’10’12’14’

GLCSL-FS-500-28 (S or AL)-28-10GLCSL-FS-500-28 (S or AL)-28-12GLCSL-FS-500-28 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

23 1/423 1/423 1/4

20 3/420 3/420 3/4

252525

15 1/815 1/815 1/8

7 1/87 1/87 1/8

31 1/431 1/431 1/4

29’-4”29’-6”29’-6”

12’-2 1/4”14’-2 1/4”16’-2 1/4”

344

222

33’

10’10’12’12’14’14’

GLCS-FS-500-28 (S or AL)-33-10AL-FS-500-28-33-10

GLCS-FS-500-28 (S or AL)-33-12AL-FS-500-28-33-12

GLCS-FS-500-28 (S or AL)-33-14AL-FS-500-28-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

23 1/423 3/823 1/423 3/823 1/423 3/8

18 3/822 5/818 3/822 5/818 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

15 1/813 1/815 1/813 1/815 1/813 1/8

7 1/87 7/87 1/87 7/87 1/87 7/8

31 1/437 1/831 1/437 1/831 1/437 1/8

29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”

13’-11 7/8”14’-4 1/8”

15’-11 7/8”16’-4 1/8”

334444

333333

34’10’12’14’

GLCSLX-FS-500-28 (S or AL)-34-10GLCSLX-FS-500-28 (S or AL)-34-12GLCSLX-FS-500-28 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

15 1/815 1/815 1/8

7 1/87 1/87 1/8

31 1/431 1/431 1/4

29’-4”29’-6”29’-6”

12’-4 1/4”14’-4 1/4”16’-4 1/4”

344

222

43’

10’10’12’12’14’14’

GLCS-FS-500-28 (S or AL)-43-10AL-FS-500-28-43-10

GLCS-FS-500-28 (S or AL)-43-12AL-FS-500-28-43-12

GLCS-FS-500-28 (S or AL)-43-14AL-FS-500-28-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

23 1/423 3/823 1/423 3/823 1/423 3/8

18 3/822 5/818 3/822 5/818 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

15 1/813 1/815 1/813 1/815 1/813 1/8

7 1/87 7/87 1/87 7/87 1/87 7/8

31 1/437 1/831 1/437 1/831 1/437 1/8

29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”

13’-11 7/8”14’-4 1/8”

15’-11 7/8”16’-4 1/8”

334444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-28 (S or AL)-53-10AL-FS-500-28-53-10

GLCSL-FS-500-28 (S or AL)-53-10GLCS-FS-500-28 (S or AL)-53-12

AL-FS-500-28-53-12GLCSL-FS-500-28 (S or AL)-53-12GLCS-FS-500-28 (S or AL)-53-14

AL-FS-500-28-53-14GLCSL-FS-500-28 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

23 1/423 3/823 1/423 1/423 3/823 1/423 1/423 3/823 1/4

18 3/822 5/820 3/418 3/822 5/820 3/418 3/822 5/820 3/4

22 5/8-

2522 5/8

-25

22 5/8-

25

15 1/813 1/815 1/815 1/813 1/815 1/815 1/813 1/815 1/8

7 1/87 7/87 1/87 1/87 7/87 1/87 1/87 7/87 1/8

31 1/437 1/831 1/431 1/437 1/831 1/431 1/437 1/831 1/4

29’-4”29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”12’-2 1/4”

13’-11 7/8”14’-4 1/8”14’-2 1/4”

15’-11 7/8”16’-4 1/8”16’-2 1/4”

333444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-28 (S or AL)-63-10AL-FS-500-28-63-10

GLCS-FS-500-28 (S or AL)-63-12AL-FS-500-28-63-12

GLCS-FS-500-28 (S or AL)-63-14AL-FS-500-28-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

23 1/423 3/823 1/423 3/823 1/423 3/8

18 3/822 5/818 3/822 5/818 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

15 1/813 1/815 1/813 1/815 1/813 1/8

7 1/87 7/87 1/87 7/87 1/87 7/8

31 1/437 1/831 1/437 1/831 1/437 1/8

29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”

13’-11 7/8”14’-4 1/8”

15’-11 7/8”16’-4 1/8”

334444

444444

64’10’12’14’

GLCSLX-FS-500-28 (S or AL)-64-10GLCSLX-FS-500-28 (S or AL)-64-12GLCSLX-FS-500-28 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

15 1/815 1/815 1/8

7 1/87 1/87 1/8

37 1/837 1/837 1/8

29’-4”29’-6”29’-6”

12’-4 1/4”14’-4 1/4”16’-4 1/4”

344

333

78’10’12’14’

GLCSL-FS-500-28 (S or AL)-78-10GLCSL-FS-500-28 (S or AL)-78-12GLCSL-FS-500-28 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

23 1/423 1/423 1/4

20 3/420 3/420 3/4

252525

15 1/815 1/815 1/8

7 1/87 1/87 1/8

37 1/837 1/837 1/8

29’-4”29’-6”29’-6”

12’-2 1/4”14’-2 1/4”16’-2 1/4”

344

444

83’

10’10’12’12’14’14’

GLCS-FS-500-28 (S or AL)-83-10AL-FS-500-28-83-10

GLCS-FS-500-28 (S or AL)-83-12AL-FS-500-28-83-12

GLCS-FS-500-28 (S or AL)-83-14AL-FS-500-28-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

23 1/423 3/823 1/423 3/823 1/423 3/8

18 3/822 5/818 3/822 5/818 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

15 1/813 1/815 1/813 1/815 1/813 1/8

7 1/87 7/87 1/87 7/87 1/87 7/8

37 1/837 1/837 1/837 1/837 1/837 1/8

29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”

13’-11 7/8”14’-4 1/8”

15’-11 7/8”16’-4 1/8”

334444

555555

94’10’12’14’

GLCSLX-FS-500-28 (S or AL)-94-10GLCSLX-FS-500-28 (S or AL)-94-12GLCSLX-FS-500-28 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

15 1/815 1/815 1/8

7 1/87 1/87 1/8

37 1/837 1/837 1/8

29’-4”29’-6”29’-6”

12’-4 1/4”14’-4 1/4”16’-4 1/4”

344

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-28 (S or AL)-103-10AL-FS-500-28-103-10

GLCSL-FS-500-28 (S or AL)-103-10GLCS-FS-500-28 (S or AL)-103-12

AL-FS-500-28-103-12GLCSL-FS-500-28 (S or AL)-103-12GLCS-FS-500-28 (S or AL)-103-14

AL-FS-500-28-103-14GLCSL-FS-500-28 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

23 1/423 3/823 1/423 1/423 3/823 1/423 1/423 3/823 1/4

18 3/822 5/820 3/418 3/822 5/820 3/418 3/822 5/820 3/4

22 5/8-

2522 5/8

-25

22 5/8-

25

15 1/813 1/815 1/815 1/813 1/815 1/815 1/813 1/815 1/8

7 1/87 7/87 1/87 1/87 7/87 1/87 1/87 7/87 1/8

37 1/837 1/837 1/837 1/837 1/837 1/837 1/837 1/837 1/8

29’-4”29’-4”29’-4”29’-6”29’-6”29’-6”29’-6”29’-6”29’-6”

11’-11 7/8”12’-4 1/8”12’-2 1/4”

13’-11 7/8”14’-4 1/8”14’-2 1/4”

15’-11 7/8”16’-4 1/8”16’-2 1/4”

333444444

665665665

124’10’12’14’

GLCSLX-FS-500-28 (S or AL)-124-10GLCSLX-FS-500-28 (S or AL)-124-12GLCSLX-FS-500-28 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

15 1/815 1/815 1/8

7 1/87 1/87 1/8

37 1/837 1/837 1/8

29’-4”29’-6”29’-6”

12’-4 1/4”14’-4 1/4”16’-4 1/4”

344

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

500# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

15

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

16

500# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

34’

28’10’12’14’

GLCSL-FS-500-34 (S or AL)-28-10GLCSL-FS-500-34 (S or AL)-28-12GLCSL-FS-500-34 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

23 1/423 1/423 1/4

20 3/420 3/420 3/4

252525

17 1/817 1/817 1/8

7 1/87 1/87 1/8

20 1/220 1/220 1/2

35’-6”35’-6”35’-6”

12’-3 1/4”14’-3 1/4”16’-3 1/4”

444

222

33’

10’10’12’12’14’14’

GLCS-FS-500-34 (S or AL)-33-10AL-FS-500-34-33-10

GLCS-FS-500-34 (S or AL)-33-12AL-FS-500-34-33-12

GLCS-FS-500-34 (S or AL)-33-14AL-FS-500-34-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

23 1/423 3/823 1/423 3/823 1/423 3/8

20 3/822 5/820 3/822 5/820 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

17 1/815 1/417 1/815 1/417 1/815 1/4

7 1/87 7/87 1/87 7/87 1/87 7/8

20 1/243 7/820 1/243 7/820 1/243 7/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”14’-2 7/8”14’-5 1/8”16’-2 7/8”16’-5 1/8”

444444

333333

34’10’12’14’

GLCSLX-FS-500-34 (S or AL)-34-10GLCSLX-FS-500-34 (S or AL)-34-12GLCSLX-FS-500-34 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

17 1/817 1/817 1/8

7 1/87 1/87 1/8

20 1/220 1/220 1/2

35’-6”35’-6”35’-6”

12’-5 1/4”14’-5 1/4”16’-5 1/4”

444

222

43’

10’10’12’12’14’14’

GLCS-FS-500-34 (S or AL)-43-10AL-FS-500-34-43-10

GLCS-FS-500-34 (S or AL)-43-12AL-FS-500-34-43-12

GLCS-FS-500-34 (S or AL)-43-14AL-FS-500-34-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

23 1/423 3/823 1/423 3/823 1/423 3/8

20 3/822 5/820 3/822 5/820 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

17 1/815 1/417 1/815 1/417 1/815 1/4

7 1/87 7/87 1/87 7/87 1/87 7/8

20 1/243 7/820 1/243 7/820 1/243 7/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”14’-2 7/8”14’-5 1/8”16’-2 7/8”16’-5 1/8”

444444

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-34 (S or AL)-53-10AL-FS-500-34-53-10

GLCSL-FS-500-34 (S or AL)-53-10GLCS-FS-500-34 (S or AL)-53-12

AL-FS-500-34-53-12GLCSL-FS-500-34 (S or AL)-53-12GLCS-FS-500-34 (S or AL)-53-14

AL-FS-500-34-53-14GLCSL-FS-500-34 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

23 1/423 3/823 1/423 1/423 3/823 1/423 1/423 3/823 1/4

20 3/822 5/820 3/420 3/822 5/820 3/420 3/822 5/820 3/4

22 5/8-

2522 5/8

-25

22 5/8-

25

17 1/815 1/417 1/817 1/815 1/417 1/817 1/815 1/417 1/8

7 1/87 7/87 1/87 1/87 7/87 1/87 1/87 7/87 1/8

20 1/243 7/820 1/220 1/243 7/820 1/220 1/243 7/820 1/2

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”12’-3 1/4”14’-2 7/8”14’-5 1/8”14’-3 1/4”16’-2 7/8”16’-5 1/8”16’-3 1/4”

444444444

443443443

63’

10’10’12’12’14’14’

GLCS-FS-500-34 (S or AL)-63-10AL-FS-500-34-63-10

GLCS-FS-500-34 (S or AL)-63-12AL-FS-500-34-63-12

GLCS-FS-500-34 (S or AL)-63-14AL-FS-500-34-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

23 1/423 3/823 1/423 3/823 1/423 3/8

20 3/822 5/820 3/822 5/820 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

17 1/815 1/417 1/815 1/417 1/815 1/4

7 1/87 7/87 1/87 7/87 1/87 7/8

20 1/243 7/820 1/243 7/820 1/243 7/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”14’-2 7/8”14’-5 1/8”16’-2 7/8”16’-5 1/8”

444444

444444

64’10’12’14’

GLCSLX-FS-500-34 (S or AL)-64-10GLCSLX-FS-500-34 (S or AL)-64-12GLCSLX-FS-500-34 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

17 1/817 1/817 1/8

7 1/87 1/87 1/8

43 7/843 7/843 7/8

35’-6”35’-6”35’-6”

12’-5 1/4”14’-5 1/4”16’-5 1/4”

444

333

78’10’12’14’

GLCSL-FS-500-34 (S or AL)-78-10GLCSL-FS-500-34 (S or AL)-78-12GLCSL-FS-500-34 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

23 1/423 1/423 1/4

20 3/420 3/420 3/4

252525

17 1/817 1/817 1/8

7 1/87 1/87 1/8

43 7/843 7/843 7/8

35’-6”35’-6”35’-6”

12’-3 1/4”14’-3 1/4”16’-3 1/4”

444

444

83’

10’10’12’12’14’14’

GLCS-FS-500-34 (S or AL)-83-10AL-FS-500-34-83-10

GLCS-FS-500-34 (S or AL)-83-12AL-FS-500-34-83-12

GLCS-FS-500-34 (S or AL)-83-14AL-FS-500-34-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

23 1/423 3/823 1/423 3/823 1/423 3/8

20 3/822 5/820 3/822 5/820 3/822 5/8

22 5/8-

22 5/8-

22 5/8-

17 1/815 1/417 1/815 1/417 1/815 1/4

7 1/87 7/87 1/87 7/87 1/87 7/8

43 7/843 7/843 7/843 7/843 7/843 7/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”14’-2 7/8”14’-5 1/8”16’-2 7/8”16’-5 1/8”

444444

555555

94’10’12’14’

GLCSLX-FS-500-34 (S or AL)-94-10GLCSLX-FS-500-34 (S or AL)-94-12GLCSLX-FS-500-34 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

17 1/817 1/817 1/8

7 1/87 1/87 1/8

43 7/843 7/843 7/8

35’-6”35’-6”35’-6”

12’-5 1/4”14’-5 1/4”16’-5 1/4”

444

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-500-34 (S or AL)-103-10AL-FS-500-34-103-10

GLCSL-FS-500-34 (S or AL)-103-10GLCS-FS-500-34 (S or AL)-103-12

AL-FS-500-34-103-12GLCSL-FS-500-34 (S or AL)-103-12GLCS-FS-500-34 (S or AL)-103-14

AL-FS-500-34-103-14GLCSL-FS-500-34 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

23 1/423 3/823 1/423 1/423 3/823 1/423 1/423 3/823 1/4

20 3/822 5/820 3/420 3/822 5/820 3/420 3/822 5/820 3/4

22 5/8-

2522 5/8

-25

22 5/8-

25

17 1/815 1/417 1/817 1/815 1/417 1/817 1/815 1/417 1/8

7 1/87 7/87 1/87 1/87 7/87 1/87 1/87 7/87 1/8

43 7/843 7/843 7/843 7/843 7/843 7/843 7/843 7/843 7/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”

12’-2 7/8”12’-5 1/8”12’-3 1/4”14’-2 7/8”14’-5 1/8”14’-3 1/4”16’-2 7/8”16’-5 1/8”16’-3 1/4”

444444444

665665665

124’10’12’14’

GLCSLX-FS-500-34 (S or AL)-124-10GLCSLX-FS-500-34 (S or AL)-124-12GLCSLX-FS-500-34 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

23 1/423 1/423 1/4

22 3/422 3/422 3/4

272727

17 1/817 1/817 1/8

7 1/87 1/87 1/8

43 7/843 7/843 7/8

35’-6”35’-6”35’-6”

12’-5 1/4”14’-5 1/4”16’-5 1/4”

444

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

10’

11’-6”10’12’14’

GLCS-FS-1000-10 (S or AL)-11.5-10GLCS-FS-1000-10 (S or AL)-11.5-12GLCS-FS-1000-10 (S or AL)-11.5-14

SteelSteelSteel

20’20’20’

999

151515

18 1/818 1/818 1/8

22 1/822 1/822 1/8

7 5/87 5/87 5/8

7 7/87 7/87 7/8

13 3/813 3/813 3/8

11’-6”11’-6”11’-8”

11’-10 5/8”13’-10 5/8”15’-10 5/8”

445

222

23’

10’10’12’12’14’14’

GLCS-FS-1000-10 (S or AL)-23-10AL-FS-1000-10-23-10

GLCS-FS-1000-10 (S or AL)-23-12AL-FS-1000-10-23-12

GLCS-FS-1000-10 (S or AL)-23-14AL-FS-1000-10-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

7 5/813 1/87 5/8

13 1/87 5/8

13 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

13 3/817 1/213 3/817 1/213 3/817 1/2

11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

222222

28’10’12’14’

GLCSL-FS-1000-10 (S or AL)-28-10GLCSL-FS-1000-10 (S or AL)-28-12GLCSL-FS-1000-10 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

151515

212121

252525

7 5/87 5/87 5/8

7 7/87 7/87 7/8

13 3/813 3/813 3/8

11’-6”11’-6”11’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-10 (S or AL)-33-10AL-FS-1000-10-33-10

GLCS-FS-1000-10 (S or AL)-33-12AL-FS-1000-10-33-12

GLCS-FS-1000-10 (S or AL)-33-14AL-FS-1000-10-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

7 5/813 1/87 5/8

13 1/87 5/8

13 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

13 3/817 1/213 3/817 1/213 3/817 1/2

11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-10 (S or AL)-34-10GLCSLX-FS-1000-10 (S or AL)-34-12GLCSLX-FS-1000-10 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

7 5/87 5/87 5/8

7 7/87 7/87 7/8

13 3/813 3/813 3/8

11’-6”11’-6”11’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-10 (S or AL)-43-10AL-FS-1000-10-43-10

GLCS-FS-1000-10 (S or AL)-43-12AL-FS-1000-10-43-12

GLCS-FS-1000-10 (S or AL)-43-14AL-FS-1000-10-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

7 5/813 1/87 5/8

13 1/87 5/8

13 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

13 3/817 1/213 3/817 1/213 3/817 1/2

11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-10 (S or AL)-53-10AL-FS-1000-10-53-10

GLCSL-FS-1000-10 (S or AL)-53-10GLCS-FS-1000-10 (S or AL)-53-12

AL-FS-1000-10-53-12GLCSL-FS-1000-10 (S or AL)-53-12GLCS-FS-1000-10 (S or AL)-53-14

AL-FS-1000-10-53-14GLCSL-FS-1000-10 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

7 5/813 1/87 5/87 5/8

13 1/87 5/87 5/8

13 1/87 5/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

13 3/817 1/213 3/813 3/817 1/213 3/813 3/817 1/213 3/8

11’-6”11’-6”11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-10 (S or AL)-63-10AL-FS-1000-10-63-10

GLCS-FS-1000-10 (S or AL)-63-12AL-FS-1000-10-63-12

GLCS-FS-1000-10 (S or AL)-63-14AL-FS-1000-10-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

7 5/813 1/87 5/8

13 1/87 5/8

13 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

13 3/817 1/213 3/817 1/213 3/817 1/2

11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-10 (S or AL)-64-10GLCSLX-FS-1000-10 (S or AL)-64-12GLCSLX-FS-1000-10 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

7 5/87 5/87 5/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

11’-6”11’-6”11’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

333

78’10’12’14’

GLCSL-FS-1000-10 (S or AL)-78-10GLCSL-FS-1000-10 (S or AL)-78-12GLCSL-FS-1000-10 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

151515

212121

252525

7 5/87 5/87 5/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

11’-6”11’-6”11’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-10 (S or AL)-83-10AL-FS-1000-10-83-10

GLCS-FS-1000-10 (S or AL)-83-12AL-FS-1000-10-83-12

GLCS-FS-1000-10 (S or AL)-83-14AL-FS-1000-10-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

7 5/813 1/87 5/8

13 1/87 5/8

13 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/817 1/223 3/817 1/223 3/817 1/2

11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-10 (S or AL)-94-10GLCSLX-FS-1000-10 (S or AL)-94-12GLCSLX-FS-1000-10 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

7 5/87 5/87 5/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

11’-6”11’-6”11’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-10 (S or AL)-103-10AL-FS-1000-10-103-10

GLCSL-FS-1000-10 (S or AL)-103-10GLCS-FS-1000-10 (S or AL)-103-12

AL-FS-1000-10-103-12GLCSL-FS-1000-10 (S or AL)-103-12GLCS-FS-1000-10 (S or AL)-103-14

AL-FS-1000-10-103-14GLCSL-FS-1000-10 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

7 5/813 1/87 5/87 5/8

13 1/87 5/87 5/8

13 1/87 5/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

23 3/817 1/223 3/823 3/817 1/223 3/823 3/817 1/223 3/8

11’-6”11’-6”11’-6”11’-6”11’-6”11’-6”11’-8”11’-8”11’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-10 (S or AL)-124-10GLCSLX-FS-1000-10 (S or AL)-124-12GLCSLX-FS-1000-10 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

7 5/87 5/87 5/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

11’-6”11’-6”11’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

1000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

17

18

1000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

15’

23’

10’10’12’12’14’14’

GLCS-FS-1000-15 (S or AL)-23-10AL-FS-1000-15-23-10

GLCS-FS-1000-15 (S or AL)-23-12AL-FS-1000-15-23-12

GLCS-FS-1000-15 (S or AL)-23-14AL-FS-1000-15-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/824 1/423 3/824 1/423 3/824 1/4

16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

222222

28’10’12’14’

GLCSL-FS-1000-15 (S or AL)-28-10GLCSL-FS-1000-15 (S or AL)-28-12GLCSL-FS-1000-15 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

16’-6”16’-6”16’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-15 (S or AL)-33-10AL-FS-1000-15-33-10

GLCS-FS-1000-15 (S or AL)-33-12AL-FS-1000-15-33-12

GLCS-FS-1000-15 (S or AL)-33-14AL-FS-1000-15-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/824 1/423 3/824 1/423 3/824 1/4

16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-15 (S or AL)-34-10GLCSLX-FS-1000-15 (S or AL)-34-12GLCSLX-FS-1000-15 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

16’-6”16’-6”16’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-15 (S or AL)-43-10AL-FS-1000-15-43-10

GLCS-FS-1000-15 (S or AL)-43-12AL-FS-1000-15-43-12

GLCS-FS-1000-15 (S or AL)-43-14AL-FS-1000-15-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/824 1/423 3/824 1/423 3/824 1/4

16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-15 (S or AL)-53-10AL-FS-1000-15-53-10

GLCSL-FS-1000-15 (S or AL)-53-10GLCS-FS-1000-15 (S or AL)-53-12

AL-FS-1000-15-53-12GLCSL-FS-1000-15 (S or AL)-53-12GLCS-FS-1000-15 (S or AL)-53-14

AL-FS-1000-15-53-14GLCSL-FS-1000-15 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

23 3/824 1/423 3/823 3/824 1/423 3/823 3/824 1/423 3/8

16’-6”16’-6”16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-15 (S or AL)-63-10AL-FS-1000-15-63-10

GLCS-FS-1000-15 (S or AL)-63-12AL-FS-1000-15-63-12

GLCS-FS-1000-15 (S or AL)-63-14AL-FS-1000-15-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/824 1/423 3/824 1/423 3/824 1/4

16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-15 (S or AL)-64-10GLCSLX-FS-1000-15 (S or AL)-64-12GLCSLX-FS-1000-15 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

24 1/424 1/424 1/4

16’-6”16’-6”16’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

333

78’10’12’14’

GLCSL-FS-1000-15 (S or AL)-78-10GLCSL-FS-1000-15 (S or AL)-78-12GLCSL-FS-1000-15 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

24 1/424 1/424 1/4

16’-6”16’-6”16’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-15 (S or AL)-83-10AL-FS-1000-15-83-10

GLCS-FS-1000-15 (S or AL)-83-12AL-FS-1000-15-83-12

GLCS-FS-1000-15 (S or AL)-83-14AL-FS-1000-15-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

24 1/424 1/424 1/424 1/424 1/424 1/4

16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-15 (S or AL)-94-10GLCSLX-FS-1000-15 (S or AL)-94-12GLCSLX-FS-1000-15 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

24 1/424 1/424 1/4

16’-6”16’-6”16’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-15 (S or AL)-103-10AL-FS-1000-15-103-10

GLCSL-FS-1000-15 (S or AL)-103-10GLCS-FS-1000-15 (S or AL)-103-12

AL-FS-1000-15-103-12GLCSL-FS-1000-15 (S or AL)-103-12GLCS-FS-1000-15 (S or AL)-103-14

AL-FS-1000-15-103-14GLCSL-FS-1000-15 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

24 1/424 1/424 1/424 1/424 1/424 1/424 1/424 1/424 1/4

16’-6”16’-6”16’-6”16’-6”16’-6”16’-6”16’-8”16’-8”16’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-15 (S or AL)-124-10GLCSLX-FS-1000-15 (S or AL)-124-12GLCSLX-FS-1000-15 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

24 1/424 1/424 1/4

16’-6”16’-6”16’-8”

12’-4 5/8”14’-4 5/8”16’-4 5/8”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

20’

23’

10’10’12’12’14’14’

GLCS-FS-1000-20 (S or AL)-23-10AL-FS-1000-20-23-10

GLCS-FS-1000-20 (S or AL)-23-12AL-FS-1000-20-23-12

GLCS-FS-1000-20 (S or AL)-23-14AL-FS-1000-20-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/827 5/823 3/827 5/823 3/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

222222

28’10’12’14’

GLCSL-FS-1000-20 (S or AL)-28-10GLCSL-FS-1000-20 (S or AL)-28-12GLCSL-FS-1000-20 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

21’-6”21’-6”21’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-20 (S or AL)-33-10AL-FS-1000-20-33-10

GLCS-FS-1000-20 (S or AL)-33-12AL-FS-1000-20-33-12

GLCS-FS-1000-20 (S or AL)-33-14AL-FS-1000-20-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/827 5/823 3/827 5/823 3/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-20 (S or AL)-34-10GLCSLX-FS-1000-20 (S or AL)-34-12GLCSLX-FS-1000-20 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

21’-6”21’-6”21’-8”

12’-4 5/8”14’-4 5/8”16’-5 5/8”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-20 (S or AL)-43-10AL-FS-1000-20-43-10

GLCS-FS-1000-20 (S or AL)-43-12AL-FS-1000-20-43-12

GLCS-FS-1000-20 (S or AL)-43-14AL-FS-1000-20-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/827 5/823 3/827 5/823 3/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-20 (S or AL)-53-10AL-FS-1000-20-53-10

GLCSL-FS-1000-20 (S or AL)-53-10GLCS-FS-1000-20 (S or AL)-53-12

AL-FS-1000-20-53-12GLCSL-FS-1000-20 (S or AL)-53-12GLCS-FS-1000-20 (S or AL)-53-14

AL-FS-1000-20-53-14GLCSL-FS-1000-20 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

23 3/827 5/823 3/823 3/827 5/823 3/823 3/827 5/823 3/8

21’-6”21’-6”21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-20 (S or AL)-63-10AL-FS-1000-20-63-10

GLCS-FS-1000-20 (S or AL)-63-12AL-FS-1000-20-63-12

GLCS-FS-1000-20 (S or AL)-63-14AL-FS-1000-20-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/827 5/823 3/827 5/823 3/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-20 (S or AL)-64-10GLCSLX-FS-1000-20 (S or AL)-64-12GLCSLX-FS-1000-20 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

27 5/827 5/827 5/8

21’-6”21’-6”21’-8”

12’-4 5/8”14’-4 5/8”16’-5 5/8”

445

333

78’10’12’14’

GLCSL-FS-1000-20 (S or AL)-78-10GLCSL-FS-1000-20 (S or AL)-78-12GLCSL-FS-1000-20 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

27 5/827 5/827 5/8

21’-6”21’-6”21’-8”

12’-1 1/2”14’-1 1/2”16’-1 1/2”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-20 (S or AL)-83-10AL-FS-1000-20-83-10

GLCS-FS-1000-20 (S or AL)-83-12AL-FS-1000-20-83-12

GLCS-FS-1000-20 (S or AL)-83-14AL-FS-1000-20-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

27 5/827 5/827 5/827 5/827 5/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”

13’-10 5/8”14’-2 5/8”

15’-10 5/8”16’-2 5/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-20 (S or AL)-94-10GLCSLX-FS-1000-20 (S or AL)-94-12GLCSLX-FS-1000-20 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

27 5/827 5/827 5/8

21’-6”21’-6”21’-8”

12’-4 5/8”14’-4 5/8”16’-5 5/8”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-20 (S or AL)-103-10AL-FS-1000-20-103-10

GLCSL-FS-1000-20 (S or AL)-103-10GLCS-FS-1000-20 (S or AL)-103-12

AL-FS-1000-20-103-12GLCSL-FS-1000-20 (S or AL)-103-12GLCS-FS-1000-20 (S or AL)-103-14

AL-FS-1000-20-103-14GLCSL-FS-1000-20 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

27 5/827 5/827 5/827 5/827 5/827 5/827 5/827 5/827 5/8

21’-6”21’-6”21’-6”21’-6”21’-6”21’-6”21’-8”21’-8”21’-8”

11’-10 5/8”12’-2 5/8”12’-1 1/2”

13’-10 5/8”14’-2 5/8”14’-1 1/2”

15’-10 5/8”16’-2 5/8”16’-1 1/2”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-20 (S or AL)-124-10GLCSLX-FS-1000-20 (S or AL)-124-12GLCSLX-FS-1000-20 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

27 5/827 5/827 5/8

21’-6”21’-6”21’-8”

12’-4 5/8”14’-4 5/8”16’-5 5/8”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

1000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

19

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

20

1000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

23’

23’

10’10’12’12’14’14’

GLCS-FS-1000-23 (S or AL)-23-10AL-FS-1000-23-23-10

GLCS-FS-1000-23 (S or AL)-23-12AL-FS-1000-23-23-12

GLCS-FS-1000-23 (S or AL)-23-14AL-FS-1000-23-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/831

23 3/831

23 3/831

24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”

13’-11 5/8”14’-3 5/8”

15’-11 5/8”16’-3 5/8”

444455

222222

28’10’12’14’

GLCSL-FS-1000-23 (S or AL)-28-10GLCSL-FS-1000-23 (S or AL)-28-12GLCSL-FS-1000-23 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

24’-6”24’-6”24’-8”

12’-2 1/2”14’-2 1/2”16’-2 1/2”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-23 (S or AL)-33-10AL-FS-1000-23-33-10

GLCS-FS-1000-23 (S or AL)-33-12AL-FS-1000-23-33-12

GLCS-FS-1000-23 (S or AL)-33-14AL-FS-1000-23-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/831

23 3/831

23 3/831

24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”

13’-11 5/8”14’-3 5/8”

15’-11 5/8”16’-3 5/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-23 (S or AL)-34-10GLCSLX-FS-1000-23 (S or AL)-34-12GLCSLX-FS-1000-23 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

23 3/823 3/823 3/8

24’-6”24’-6”24’-8”

12’-5 5/8”14’-5 5/8”16’-5 5/8”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-23 (S or AL)-43-10AL-FS-1000-23-43-10

GLCS-FS-1000-23 (S or AL)-43-12AL-FS-1000-23-43-12

GLCS-FS-1000-23 (S or AL)-43-14AL-FS-1000-23-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/831

23 3/831

23 3/831

24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”

13’-11 5/8”14’-3 5/8”

15’-11 5/8”16’-3 5/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-23 (S or AL)-53-10AL-FS-1000-23-53-10

GLCSL-FS-1000-23 (S or AL)-53-10GLCS-FS-1000-23 (S or AL)-53-12

AL-FS-1000-23-53-12GLCSL-FS-1000-23 (S or AL)-53-12GLCS-FS-1000-23 (S or AL)-53-14

AL-FS-1000-23-53-14GLCSL-FS-1000-23 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

23 3/831

23 3/823 3/8

3123 3/823 3/8

3123 3/8

24’-6”24’-6”24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”12’-2 1/2”

13’-11 5/8”14’-3 5/8”14’-2 1/2”

15’-11 5/8”16’-3 5/8”16’-2 1/2”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-23 (S or AL)-63-10AL-FS-1000-23-63-10

GLCS-FS-1000-23 (S or AL)-63-12AL-FS-1000-23-63-12

GLCS-FS-1000-23 (S or AL)-63-14AL-FS-1000-23-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

23 3/831

23 3/831

23 3/831

24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”

13’-11 5/8”14’-3 5/8”

15’-11 5/8”16’-3 5/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-23 (S or AL)-64-10GLCSLX-FS-1000-23 (S or AL)-64-12GLCSLX-FS-1000-23 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

313131

24’-6”24’-6”24’-8”

12’-5 5/8”14’-5 5/8”16’-5 5/8”

445

333

78’10’12’14’

GLCSL-FS-1000-23 (S or AL)-78-10GLCSL-FS-1000-23 (S or AL)-78-12GLCSL-FS-1000-23 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

151515

212121

252525

14 1/814 1/814 1/8

7 7/87 7/87 7/8

313131

24’-6”24’-6”24’-8”

12’-2 1/2”14’-2 1/2”16’-2 1/2”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-23 (S or AL)-83-10AL-FS-1000-23-83-10

GLCS-FS-1000-23 (S or AL)-83-12AL-FS-1000-23-83-12

GLCS-FS-1000-23 (S or AL)-83-14AL-FS-1000-23-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

151515151515

18 1/822 1/818 1/822 1/818 1/822 1/8

22 1/8-

22 1/8-

22 1/8-

14 1/813 1/814 1/813 1/814 1/813 1/8

7 7/87 7/87 7/87 7/87 7/87 7/8

313131313131

24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”

13’-11 5/8”14’-3 5/8”

15’-11 5/8”16’-3 5/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-23 (S or AL)-94-10GLCSLX-FS-1000-23 (S or AL)-94-12GLCSLX-FS-1000-23 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

313131

24’-6”24’-6”24’-8”

12’-5 5/8”14’-5 5/8”16’-5 5/8”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-23 (S or AL)-103-10AL-FS-1000-23-103-10

GLCSL-FS-1000-23 (S or AL)-103-10GLCS-FS-1000-23 (S or AL)-103-12

AL-FS-1000-23-103-12GLCSL-FS-1000-23 (S or AL)-103-12GLCS-FS-1000-23 (S or AL)-103-14

AL-FS-1000-23-103-14GLCSL-FS-1000-23 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

151515151515151515

18 1/822 1/8

2118 1/822 1/8

2118 1/822 1/8

21

22 1/8-

2522 1/8

-25

22 1/8-

25

14 1/813 1/814 1/814 1/813 1/814 1/814 1/813 1/814 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

313131313131313131

24’-6”24’-6”24’-6”24’-6”24’-6”24’-6”24’-8”24’-8”24’-8”

11’-11 5/8”12’-3 5/8”12’-2 1/2”

13’-11 5/8”14’-3 5/8”14’-2 1/2”

15’-11 5/8”16’-3 5/8”16’-2 1/2”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-23 (S or AL)-124-10GLCSLX-FS-1000-23 (S or AL)-124-12GLCSLX-FS-1000-23 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

151515

24 1/824 1/824 1/8

28 1/828 1/828 1/8

14 1/814 1/814 1/8

7 7/87 7/87 7/8

313131

24’-6”24’-6”24’-8”

12’-5 5/8”14’-5 5/8”16’-5 5/8”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

28’

23’

10’10’12’12’14’14’

GLCS-FS-1000-28 (S or AL)-23-10AL-FS-1000-28-23-10

GLCS-FS-1000-28 (S or AL)-23-12AL-FS-1000-28-23-12

GLCS-FS-1000-28 (S or AL)-23-14AL-FS-1000-28-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

21 1/821

21 1/821

21 1/821

20 1/223 5/820 1/223 5/820 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

1715 1/4

1715 1/4

1715 1/4

7 7/87 7/87 7/87 7/87 7/87 7/8

33 3/837 3/433 3/837 3/433 3/837 3/4

29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”

12’-1”12’-5 1/8”

14’-1”14’-5 1/8”

16’-1”16’-5 1/8”

444455

222222

28’10’12’14’

GLCSL-FS-1000-28 (S or AL)-28-10GLCSL-FS-1000-28 (S or AL)-28-12GLCSL-FS-1000-28 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

21 1/821 1/821 1/8

23 3/823 3/823 3/8

26 5/826 5/826 5/8

171717

7 7/87 7/87 7/8

33 3/833 3/833 3/8

29’-6”29’-6”29’-8”

12’-5 7/8”14’-5 7/8”16’-5 7/8”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-28 (S or AL)-33-10AL-FS-1000-28-33-10

GLCS-FS-1000-28 (S or AL)-33-12AL-FS-1000-28-33-12

GLCS-FS-1000-28 (S or AL)-33-14AL-FS-1000-28-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

21 1/821

21 1/821

21 1/821

20 1/223 5/820 1/223 5/820 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

1715 1/4

1715 1/4

1715 1/4

7 7/87 7/87 7/87 7/87 7/87 7/8

33 3/837 3/433 3/837 3/433 3/837 3/4

29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”

12’-1”12’-5 1/8”

14’-1”14’-5 1/8”

16’-1”16’-5 1/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-28 (S or AL)-34-10GLCSLX-FS-1000-28 (S or AL)-34-12GLCSLX-FS-1000-28 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

21 1/821 1/821 1/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

171717

7 7/87 7/87 7/8

33 3/833 3/833 3/8

29’-6”29’-6”29’-8”

12’-8”14’-8”16’-8”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-28 (S or AL)-43-10AL-FS-1000-28-43-10

GLCS-FS-1000-28 (S or AL)-43-12AL-FS-1000-28-43-12

GLCS-FS-1000-28 (S or AL)-43-14AL-FS-1000-28-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

21 1/821

21 1/821

21 1/821

20 1/223 5/820 1/223 5/820 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

1715 1/4

1715 1/4

1715 1/4

7 7/87 7/87 7/87 7/87 7/87 7/8

33 3/837 3/433 3/837 3/433 3/837 3/4

29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”

12’-1”12’-5 1/8”

14’-1”14’-5 1/8”

16’-1”16’-5 1/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-28 (S or AL)-53-10AL-FS-1000-28-53-10

GLCSL-FS-1000-28 (S or AL)-53-10GLCS-FS-1000-28 (S or AL)-53-12

AL-FS-1000-28-53-12GLCSL-FS-1000-28 (S or AL)-53-12GLCS-FS-1000-28 (S or AL)-53-14

AL-FS-1000-28-53-14GLCSL-FS-1000-28 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

21 1/821

21 1/821 1/8

2121 1/821 1/8

2121 1/8

20 1/223 5/823 3/820 1/223 5/823 3/820 1/223 5/823 3/8

23 3/4-

26 5/823 3/4

-26 5/823 3/4

-26 5/8

1715 1/4

1717

15 1/41717

15 1/417

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

33 3/837 3/433 3/833 3/837 3/433 3/833 3/837 3/433 3/8

29’-6”29’-6”29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”29’-8”

12’-1”12’-5 1/8”12’-5 7/8”

14’-1”14’-5 1/8”14’-5 7/8”

16’-1”16’-5 1/8”16’-5 7/8”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-28 (S or AL)-63-10AL-FS-1000-28-63-10

GLCS-FS-1000-28 (S or AL)-63-12AL-FS-1000-28-63-12

GLCS-FS-1000-28 (S or AL)-63-14AL-FS-1000-28-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

21 1/821

21 1/821

21 1/821

20 1/223 5/820 1/223 5/820 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

1715 1/4

1715 1/4

1715 1/4

7 7/87 7/87 7/87 7/87 7/87 7/8

33 3/837 3/433 3/837 3/433 3/837 3/4

29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”

12’-1”12’-5 1/8”

14’-1”14’-5 1/8”

16’-1”16’-5 1/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-28 (S or AL)-64-10GLCSLX-FS-1000-28 (S or AL)-64-12GLCSLX-FS-1000-28 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

21 1/821 1/821 1/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

171717

7 7/87 7/87 7/8

37 3/437 3/437 3/4

29’-6”29’-6”29’-8”

12’-8”14’-8”16’-8”

445

333

78’10’12’14’

GLCSL-FS-1000-28 (S or AL)-78-10GLCSL-FS-1000-28 (S or AL)-78-12GLCSL-FS-1000-28 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

21 1/821 1/821 1/8

23 3/823 3/823 3/8

26 5/826 5/826 5/8

171717

7 7/87 7/87 7/8

37 3/437 3/437 3/4

29’-6”29’-6”29’-8”

12’-5 7/8”14’-5 7/8”16’-5 7/8”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-28 (S or AL)-83-10AL-FS-1000-28-83-10

GLCS-FS-1000-28 (S or AL)-83-12AL-FS-1000-28-83-12

GLCS-FS-1000-28 (S or AL)-83-14AL-FS-1000-28-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

21 1/821

21 1/821

21 1/821

20 1/223 5/820 1/223 5/820 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

1715 1/4

1715 1/4

1715 1/4

7 7/87 7/87 7/87 7/87 7/87 7/8

37 3/437 3/437 3/437 3/437 3/437 3/4

29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”

12’-1”12’-5 1/8”

14’-1”14’-5 1/8”

16’-1”16’-5 1/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-28 (S or AL)-94-10GLCSLX-FS-1000-28 (S or AL)-94-12GLCSLX-FS-1000-28 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

21 1/821 1/821 1/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

171717

7 7/87 7/87 7/8

37 3/437 3/437 3/4

29’-6”29’-6”29’-8”

12’-8”14’-8”16’-8”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-28 (S or AL)-103-10AL-FS-1000-28-103-10

GLCSL-FS-1000-28 (S or AL)-103-10GLCS-FS-1000-28 (S or AL)-103-12

AL-FS-1000-28-103-12GLCSL-FS-1000-28 (S or AL)-103-12GLCS-FS-1000-28 (S or AL)-103-14

AL-FS-1000-28-103-14GLCSL-FS-1000-28 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

21 1/821

21 1/821 1/8

2121 1/821 1/8

2121 1/8

20 1/223 5/823 3/820 1/223 5/823 3/820 1/223 5/823 3/8

23 3/4-

26 5/823 3/4

-26 5/823 3/4

-26 5/8

1715 1/4

1717

15 1/41717

15 1/417

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

37 3/437 3/437 3/437 3/437 3/437 3/437 3/437 3/437 3/4

29’-6”29’-6”29’-6”29’-6”29’-6”29’-6”29’-8”29’-8”29’-8”

12’-1”12’-5 1/8”12’-5 7/8”

14’-1”14’-5 1/8”14’-5 7/8”

16’-1”16’-5 1/8”16’-5 7/8”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-28 (S or AL)-124-10GLCSLX-FS-1000-28 (S or AL)-124-12GLCSLX-FS-1000-28 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

21 1/821 1/821 1/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

171717

7 7/87 7/87 7/8

37 3/437 3/437 3/4

29’-6”29’-6”29’-8”

12’-8”14’-8”16’-8”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

1000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

21

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

22

1000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

34’

28’10’12’14’

GLCSL-FS-1000-34 (S or AL)-28-10GLCSL-FS-1000-34 (S or AL)-28-12GLCSL-FS-1000-34 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

21 7/821 7/821 7/8

23 3/823 3/823 3/8

26 5/826 5/826 5/8

20 1/820 1/820 1/8

7 7/87 7/87 7/8

39 3/839 3/839 3/8

35’-6”35’-6”35’-8”

12’-6 7/8”14’-6 7/8”16’-6 7/8”

445

222

33’

10’10’12’12’14’14’

GLCS-FS-1000-34 (S or AL)-33-10AL-FS-1000-34-33-10

GLCS-FS-1000-34 (S or AL)-33-12AL-FS-1000-34-33-12

GLCS-FS-1000-34 (S or AL)-33-14AL-FS-1000-34-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

21 7/821

21 7/821

21 7/821

23 1/223 5/823 1/223 5/823 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

20 1/816 3/420 1/816 3/420 1/816 3/4

7 7/87 7/87 7/87 7/87 7/87 7/8

39 3/844 1/239 3/844 1/239 3/844 1/2

35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”

12’-6”12’-7 1/8”

14’-6”14’-7 1/8”

16’-6”16’-7 1/8”

444455

333333

34’10’12’14’

GLCSLX-FS-1000-34 (S or AL)-34-10GLCSLX-FS-1000-34 (S or AL)-34-12GLCSLX-FS-1000-34 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

21 7/821 7/821 7/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

20 1/820 1/820 1/8

7 7/87 7/87 7/8

39 3/839 3/839 3/8

35’-6”35’-6”35’-8”

12’-9”14’-9”16’-9”

445

222

43’

10’10’12’12’14’14’

GLCS-FS-1000-34 (S or AL)-43-10AL-FS-1000-34-43-10

GLCS-FS-1000-34 (S or AL)-43-12AL-FS-1000-34-43-12

GLCS-FS-1000-34 (S or AL)-43-14AL-FS-1000-34-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

21 7/821

21 7/821

21 7/821

23 1/223 5/823 1/223 5/823 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

20 1/816 3/420 1/816 3/420 1/816 3/4

7 7/87 7/87 7/87 7/87 7/87 7/8

39 3/844 1/239 3/844 1/239 3/844 1/2

35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”

12’-6”12’-7 1/8”

14’-6”14’-7 1/8”

16’-6”16’-7 1/8”

444455

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-34 (S or AL)-53-10AL-FS-1000-34-53-10

GLCSL-FS-1000-34 (S or AL)-53-10GLCS-FS-1000-34 (S or AL)-53-12

AL-FS-1000-34-53-12GLCSL-FS-1000-34 (S or AL)-53-12GLCS-FS-1000-34 (S or AL)-53-14

AL-FS-1000-34-53-14GLCSL-FS-1000-34 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

21 7/821

21 7/821 7/8

2121 7/821 7/8

2121 7/8

23 1/223 5/823 3/823 1/223 5/823 3/823 1/223 5/823 3/8

23 3/4-

26 5/823 3/4

-26 5/823 3/4

-26 5/8

20 1/816 3/420 1/820 1/816 3/420 1/820 1/816 3/420 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

39 3/844 1/239 3/839 3/844 1/239 3/839 3/844 1/239 3/8

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”35’-8”

12’-6”12’-7 1/8”12’-6 7/8”

14’-6”14’-7 1/8”14’-6 7/8”

16’-6”16’-7 1/8”16’-6 7/8”

444444555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-1000-34 (S or AL)-63-10AL-FS-1000-34-63-10

GLCS-FS-1000-34 (S or AL)-63-12AL-FS-1000-34-63-12

GLCS-FS-1000-34 (S or AL)-63-14AL-FS-1000-34-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

21 7/821

21 7/821

21 7/821

23 1/223 5/823 1/223 5/823 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

20 1/816 3/420 1/816 3/420 1/816 3/4

7 7/87 7/87 7/87 7/87 7/87 7/8

39 3/844 1/239 3/844 1/239 3/844 1/2

35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”

12’-6”12’-7 1/8”

14’-6”14’-7 1/8”

16’-6”16’-7 1/8”

444455

444444

64’10’12’14’

GLCSLX-FS-1000-34 (S or AL)-64-10GLCSLX-FS-1000-34 (S or AL)-64-12GLCSLX-FS-1000-34 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

21 7/821 7/821 7/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

20 1/820 1/820 1/8

7 7/87 7/87 7/8

44 1/244 1/244 1/2

35’-6”35’-6”35’-8”

12’-9”14’-9”16’-9”

445

333

78’10’12’14’

GLCSL-FS-1000-34 (S or AL)-78-10GLCSL-FS-1000-34 (S or AL)-78-12GLCSL-FS-1000-34 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

21 7/821 7/821 7/8

23 3/823 3/823 3/8

26 5/826 5/826 5/8

20 1/820 1/820 1/8

7 7/87 7/87 7/8

44 1/244 1/244 1/2

35’-6”35’-6”35’-8”

12’-6 7/8”14’-6 7/8”16’-6 7/8”

445

444

83’

10’10’12’12’14’14’

GLCS-FS-1000-34 (S or AL)-83-10AL-FS-1000-34-83-10

GLCS-FS-1000-34 (S or AL)-83-12AL-FS-1000-34-83-12

GLCS-FS-1000-34 (S or AL)-83-14AL-FS-1000-34-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

21 7/821

21 7/821

21 7/821

23 1/223 5/823 1/223 5/823 1/223 5/8

23 3/4-

23 3/4-

23 3/4-

20 1/816 3/420 1/816 3/420 1/816 3/4

7 7/87 7/87 7/87 7/87 7/87 7/8

44 1/244 1/244 1/244 1/244 1/244 1/2

35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”

12’-6”12’-7 1/8”

14’-6”14’-7 1/8”

16’-6”16’-7 1/8”

444455

555555

94’10’12’14’

GLCSLX-FS-1000-34 (S or AL)-94-10GLCSLX-FS-1000-34 (S or AL)-94-12GLCSLX-FS-1000-34 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

21 7/821 7/821 7/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

20 1/820 1/820 1/8

7 7/87 7/87 7/8

44 1/244 1/244 1/2

35’-6”35’-6”35’-8”

12’-9”14’-9”16’-9”

445

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-1000-34 (S or AL)-103-10AL-FS-1000-34-103-10

GLCSL-FS-1000-34 (S or AL)-103-10GLCS-FS-1000-34 (S or AL)-103-12

AL-FS-1000-34-103-12GLCSL-FS-1000-34 (S or AL)-103-12GLCS-FS-1000-34 (S or AL)-103-14

AL-FS-1000-34-103-14GLCSL-FS-1000-34 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

21 7/821

21 7/821 7/8

2121 7/821 7/8

2121 7/8

23 1/223 5/823 3/823 1/223 5/823 3/823 1/223 5/823 3/8

23 3/4-

26 5/823 3/4

-26 5/823 3/4

-26 5/8

20 1/816 3/420 1/820 1/816 3/420 1/820 1/816 3/420 1/8

7 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/87 7/8

44 1/244 1/244 1/244 1/244 1/244 1/244 1/244 1/244 1/2

35’-6”35’-6”35’-6”35’-6”35’-6”35’-6”35’-8”35’-8”35’-8”

12’-6”12’-7 1/8”12’-6 7/8”

14’-6”14’-7 1/8”14’-6 7/8”

16’-6”16’-7 1/8”16’-6 7/8”

444444555

665665665

124’10’12’14’

GLCSLX-FS-1000-34 (S or AL)-124-10GLCSLX-FS-1000-34 (S or AL)-124-12GLCSLX-FS-1000-34 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

21 7/821 7/821 7/8

26 1/226 1/226 1/2

29 3/429 3/429 3/4

20 1/820 1/820 1/8

7 7/87 7/87 7/8

44 1/244 1/244 1/2

35’-6”35’-6”35’-8”

12’-9”14’-9”16’-9”

445

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H5in

L3in

L6in OAW OAH D

in

SPT*

10’

11’-6”10’12’15’

GLCS-FS-2000-10 (S or AL)-11.5-10GLCS-FS-2000-10 (S or AL)-11.5-12GLCS-FS-2000-10 (S or AL)-11.5-15

SteelSteelSteel

20’20’20’

999

16 1/816 1/816 1/8

19 5/819 5/819 5/8

252525

8 7/88 7/88 7/8

8 1/88 1/88 1/8

252525

11’-8”11’-8”11’-8”

12’-0 1/8”15’-0 1/8”16’-1 1/8”

555

222

23’

10’10’12’12’14’14’

GLCS-FS-2000-10 (S or AL)-23-10AL-FS-2000-10-23-10

GLCS-FS-2000-10 (S or AL)-23-12AL-FS-2000-10-23-12

GLCS-FS-2000-10 (S or AL)-23-14AL-FS-2000-10-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

8 7/813 3/88 7/8

13 3/88 7/8

13 3/8

8 1/88

8 1/88

8 1/88

2417 5/8

2417 5/8

2417 5/8

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”14’-0 1/8”14’-5 3/4”16’-1 1/8”16’-6 3/4”

555555

222222

28’10’12’14’

GLCSL-FS-2000-10 (S or AL)-28-10GLCSL-FS-2000-10 (S or AL)-28-12GLCSL-FS-2000-10 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-4 1/2”14’-4 1/2”16’-4 1/2”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-10 (S or AL)-33-10AL-FS-2000-10-33-10

GLCS-FS-2000-10 (S or AL)-33-12AL-FS-2000-10-33-12

GLCS-FS-2000-10 (S or AL)-33-14AL-FS-2000-10-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

8 7/813 3/88 7/8

13 3/88 7/8

13 3/8

8 1/88

8 1/88

8 1/88

2417 5/8

2417 5/8

2417 5/8

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”14’-0 1/8”14’-5 3/4”16’-1 1/8”16’-6 3/4”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-10 (S or AL)-34-10GLCSLX-FS-2000-10 (S or AL)-34-12GLCSLX-FS-2000-10 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-7 1/8”14’-7 1/8”16’-7 1/8”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-10 (S or AL)-43-10AL-FS-2000-10-43-10

GLCS-FS-2000-10 (S or AL)-43-12AL-FS-2000-10-43-12

GLCS-FS-2000-10 (S or AL)-43-14AL-FS-2000-10-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

8 7/813 3/88 7/8

13 3/88 7/8

13 3/8

8 1/88

8 1/88

8 1/88

2417 5/8

2417 5/8

2417 5/8

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”14’-0 1/8”14’-5 3/4”16’-1 1/8”16’-6 3/4”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-10 (S or AL)-53-10AL-FS-2000-10-53-10

GLCSL-FS-2000-10 (S or AL)-53-10GLCS-FS-2000-10 (S or AL)-53-12

AL-FS-2000-10-53-12GLCSL-FS-2000-10 (S or AL)-53-12GLCS-FS-2000-10 (S or AL)-53-14

AL-FS-2000-10-53-14GLCSL-FS-2000-10 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

8 7/813 3/88 7/88 7/8

13 3/88 7/88 7/8

13 3/88 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

2417 5/8

2424

17 5/82424

17 5/824

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”12’-4 1/2”14’-0 1/8”14’-5 3/4”14’-4 1/2”16’-1 1/8”16’-6 3/4”16’-4 1/2”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-10 (S or AL)-63-10AL-FS-2000-10-63-10

GLCS-FS-2000-10 (S or AL)-63-12AL-FS-2000-10-63-12

GLCS-FS-2000-10 (S or AL)-63-14AL-FS-2000-10-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

8 7/813 3/88 7/8

13 3/88 7/8

13 3/8

8 1/88

8 1/88

8 1/88

2417 5/8

2417 5/8

2417 5/8

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”14’-0 1/8”14’-5 3/4”16’-1 1/8”16’-6 3/4”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-10 (S or AL)-64-10GLCSLX-FS-2000-10 (S or AL)-64-12GLCSLX-FS-2000-10 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-7 1/8”14’-7 1/8”16’-7 1/8”

555

333

78’10’12’14’

GLCSL-FS-2000-10 (S or AL)-78-10GLCSL-FS-2000-10 (S or AL)-78-12GLCSL-FS-2000-10 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-4 1/2”14’-4 1/2”16’-4 1/2”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-10 (S or AL)-83-10AL-FS-2000-10-83-10

GLCS-FS-2000-10 (S or AL)-83-12AL-FS-2000-10-83-12

GLCS-FS-2000-10 (S or AL)-83-14AL-FS-2000-10-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

8 7/813 3/88 7/8

13 3/88 7/8

13 3/8

8 1/88

8 1/88

8 1/88

2417 5/8

2417 5/8

2417 5/8

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”14’-0 1/8”14’-5 3/4”16’-1 1/8”16’-6 3/4”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-10 (S or AL)-94-10GLCSLX-FS-2000-10 (S or AL)-94-12GLCSLX-FS-2000-10 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-7 1/8”14’-7 1/8”16’-7 1/8”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-10 (S or AL)-103-10AL-FS-2000-10-103-10

GLCSL-FS-2000-10 (S or AL)-103-10GLCS-FS-2000-10 (S or AL)-103-12

AL-FS-2000-10-103-12GLCSL-FS-2000-10 (S or AL)-103-12GLCS-FS-2000-10 (S or AL)-103-14

AL-FS-2000-10-103-14GLCSL-FS-2000-10 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

8 7/813 3/88 7/88 7/8

13 3/88 7/88 7/8

13 3/88 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

2417 5/8

2424

17 5/82424

17 5/824

11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”11’-8”

12’-0 1/8”12’-5 3/4”12’-4 1/2”14’-0 1/8”14’-5 3/4”14’-4 1/2”16’-1 1/8”16’-6 3/4”16’-4 1/2”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-10 (S or AL)-124-10GLCSLX-FS-2000-10 (S or AL)-124-12GLCSLX-FS-2000-10 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

8 7/88 7/88 7/8

8 1/88 1/88 1/8

242424

11’-8”11’-8”11’-8”

12’-7 1/8”14’-7 1/8”16’-7 1/8”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

2000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

23

24

2000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

15’

23’

10’10’12’12’14’14’

GLCS-FS-2000-15 (S or AL)-23-10AL-FS-2000-15-23-10

GLCS-FS-2000-15 (S or AL)-23-12AL-FS-2000-15-23-12

GLCS-FS-2000-15 (S or AL)-23-14AL-FS-2000-15-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/813 3/814 7/813 3/814 7/813 3/8

8 1/88

8 1/88

8 1/88

2424 3/8

2424 3/8

2424 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-1 1/8”16’-6 3/4”

555555

222222

28’10’12’14’

GLCSL-FS-2000-15 (S or AL)-28-10GLCSL-FS-2000-15 (S or AL)-28-12GLCSL-FS-2000-15 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

16’-8”16’-8”16’-8”

12’-4 1/2”14’-4 1/2”16’-4 1/2”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-15 (S or AL)-33-10AL-FS-2000-15-33-10

GLCS-FS-2000-15 (S or AL)-33-12AL-FS-2000-15-33-12

GLCS-FS-2000-15 (S or AL)-33-14AL-FS-2000-15-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/813 3/814 7/813 3/814 7/813 3/8

8 1/88

8 1/88

8 1/88

2424 3/8

2424 3/8

2424 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-1 1/8”16’-6 3/4”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-15 (S or AL)-34-10GLCSLX-FS-2000-15 (S or AL)-34-12GLCSLX-FS-2000-15 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

16’-8”16’-8”16’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-15 (S or AL)-43-10AL-FS-2000-15-43-10

GLCS-FS-2000-15 (S or AL)-43-12AL-FS-2000-15-43-12

GLCS-FS-2000-15 (S or AL)-43-14AL-FS-2000-15-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/813 3/814 7/813 3/814 7/813 3/8

8 1/88

8 1/88

8 1/88

2424 3/8

2424 3/8

2424 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-1 1/8”16’-6 3/4”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-15 (S or AL)-53-10AL-FS-2000-15-53-10

GLCSL-FS-2000-15 (S or AL)-53-10GLCS-FS-2000-15 (S or AL)-53-12

AL-FS-2000-15-53-12GLCSL-FS-2000-15 (S or AL)-53-12GLCS-FS-2000-15 (S or AL)-53-14

AL-FS-2000-15-53-14GLCSL-FS-2000-15 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/813 3/814 7/814 7/813 3/814 7/814 7/813 3/814 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

2424 3/8

2424

24 3/82424

24 3/824

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-1 1/8”14’-6 3/4”14’-4 1/2”16’-1 1/8”16’-6 3/4”16’-4 1/2”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-15 (S or AL)-63-10AL-FS-2000-15-63-10

GLCS-FS-2000-15 (S or AL)-63-12AL-FS-2000-15-63-12

GLCS-FS-2000-15 (S or AL)-63-14AL-FS-2000-15-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/813 3/814 7/813 3/814 7/813 3/8

8 1/88

8 1/88

8 1/88

2424 3/8

2424 3/8

2424 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-1 1/8”16’-6 3/4”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-15 (S or AL)-64-10GLCSLX-FS-2000-15 (S or AL)-64-12GLCSLX-FS-2000-15 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

24 3/824 3/824 3/8

16’-8”16’-8”16’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

333

78’10’12’14’

GLCSL-FS-2000-15 (S or AL)-78-10GLCSL-FS-2000-15 (S or AL)-78-12GLCSL-FS-2000-15 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

24 3/824 3/824 3/8

16’-8”16’-8”16’-8”

12’-4 1/2”14’-4 1/2”16’-4 1/2”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-15 (S or AL)-83-10AL-FS-2000-15-83-10

GLCS-FS-2000-15 (S or AL)-83-12AL-FS-2000-15-83-12

GLCS-FS-2000-15 (S or AL)-83-14AL-FS-2000-15-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/813 3/814 7/813 3/814 7/813 3/8

8 1/88

8 1/88

8 1/88

24 3/824 3/824 3/824 3/824 3/824 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-1 1/8”16’-6 3/4”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-15 (S or AL)-94-10GLCSLX-FS-2000-15 (S or AL)-94-12GLCSLX-FS-2000-15 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

24 3/824 3/824 3/8

16’-8”16’-8”16’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-15 (S or AL)-103-10AL-FS-2000-15-103-10

GLCSL-FS-2000-15 (S or AL)-103-10GLCS-FS-2000-15 (S or AL)-103-12

AL-FS-2000-15-103-12GLCSL-FS-2000-15 (S or AL)-103-12GLCS-FS-2000-15 (S or AL)-103-14

AL-FS-2000-15-103-14GLCSL-FS-2000-15 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/813 3/814 7/814 7/813 3/814 7/814 7/813 3/814 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

24 3/824 3/824 3/824 3/824 3/824 3/824 3/824 3/824 3/8

16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”16’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-1 1/8”14’-6 3/4”14’-4 1/2”16’-1 1/8”16’-6 3/4”16’-4 1/2”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-15 (S or AL)-124-10GLCSLX-FS-2000-15 (S or AL)-124-12GLCSLX-FS-2000-15 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

24 3/824 3/824 3/8

16’-8”16’-8”16’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

20’

23’

10’10’12’12’14’14’

GLCS-FS-2000-20 (S or AL)-23-10AL-FS-2000-20-23-10

GLCS-FS-2000-20 (S or AL)-23-12AL-FS-2000-20-23-12

GLCS-FS-2000-20 (S or AL)-23-14AL-FS-2000-20-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2427 3/4

2427 3/4

2427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-2 1/8”16’-7 3/4”

555555

222222

28’10’12’14’

GLCSL-FS-2000-20 (S or AL)-28-10GLCSL-FS-2000-20 (S or AL)-28-12GLCSL-FS-2000-20 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

21’-8”21’-8”21’-8”

12’-4 1/2”14’-4 1/2”16’-5 1/2”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-20 (S or AL)-33-10AL-FS-2000-20-33-10

GLCS-FS-2000-20 (S or AL)-33-12AL-FS-2000-20-33-12

GLCS-FS-2000-20 (S or AL)-33-14AL-FS-2000-20-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2427 3/4

2427 3/4

2427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-2 1/8”16’-7 3/4”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-20 (S or AL)-34-10GLCSLX-FS-2000-20 (S or AL)-34-12GLCSLX-FS-2000-20 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

21’-8”21’-8”21’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-20 (S or AL)-43-10AL-FS-2000-20-43-10

GLCS-FS-2000-20 (S or AL)-43-12AL-FS-2000-20-43-12

GLCS-FS-2000-20 (S or AL)-43-14AL-FS-2000-20-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2427 3/4

2427 3/4

2427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-2 1/8”16’-7 3/4”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-20 (S or AL)-53-10AL-FS-2000-20-53-10

GLCSL-FS-2000-20 (S or AL)-53-10GLCS-FS-2000-20 (S or AL)-53-12

AL-FS-2000-20-53-12GLCSL-FS-2000-20 (S or AL)-53-12GLCS-FS-2000-20 (S or AL)-53-14

AL-FS-2000-20-53-14GLCSL-FS-2000-20 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/815 1/214 7/814 7/815 1/214 7/814 7/815 1/214 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

2427 3/4

2424

27 3/42424

27 3/424

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-1 1/8”14’-6 3/4”14’-4 1/2”16’-2 1/8”16’-7 3/4”16’-5 1/2”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-20 (S or AL)-63-10AL-FS-2000-20-63-10

GLCS-FS-2000-20 (S or AL)-63-12AL-FS-2000-20-63-12

GLCS-FS-2000-20 (S or AL)-63-14AL-FS-2000-20-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2427 3/4

2427 3/4

2427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-2 1/8”16’-7 3/4”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-20 (S or AL)-64-10GLCSLX-FS-2000-20 (S or AL)-64-12GLCSLX-FS-2000-20 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

27 3/427 3/427 3/4

21’-8”21’-8”21’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

333

78’10’12’14’

GLCSL-FS-2000-20 (S or AL)-78-10GLCSL-FS-2000-20 (S or AL)-78-12GLCSL-FS-2000-20 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

27 3/427 3/427 3/4

21’-8”21’-8”21’-8”

12’-4 1/2”14’-4 1/2”16’-5 1/2”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-20 (S or AL)-83-10AL-FS-2000-20-83-10

GLCS-FS-2000-20 (S or AL)-83-12AL-FS-2000-20-83-12

GLCS-FS-2000-20 (S or AL)-83-14AL-FS-2000-20-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

27 3/427 3/427 3/427 3/427 3/427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”14’-1 1/8”14’-6 3/4”16’-2 1/8”16’-7 3/4”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-20 (S or AL)-94-10GLCSLX-FS-2000-20 (S or AL)-94-12GLCSLX-FS-2000-20 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

27 3/427 3/427 3/4

21’-8”21’-8”21’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-20 (S or AL)-103-10AL-FS-2000-20-103-10

GLCSL-FS-2000-20 (S or AL)-103-10GLCS-FS-2000-20 (S or AL)-103-12

AL-FS-2000-20-103-12GLCSL-FS-2000-20 (S or AL)-103-12GLCS-FS-2000-20 (S or AL)-103-14

AL-FS-2000-20-103-14GLCSL-FS-2000-20 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/815 1/214 7/814 7/815 1/214 7/814 7/815 1/214 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

27 3/427 3/427 3/427 3/427 3/427 3/427 3/427 3/427 3/4

21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”21’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-1 1/8”14’-6 3/4”14’-4 1/2”16’-2 1/8”16’-7 3/4”16’-5 1/2”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-20 (S or AL)-124-10GLCSLX-FS-2000-20 (S or AL)-124-12GLCSLX-FS-2000-20 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

27 3/427 3/427 3/4

21’-8”21’-8”21’-8”

12’-7 1/8”14’-7 1/8”16’-8 1/8”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

2000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

25

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

26

2000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

23’

23’

10’10’12’12’14’14’

GLCS-FS-2000-23 (S or AL)-23-10AL-FS-2000-23-23-10

GLCS-FS-2000-23 (S or AL)-23-12AL-FS-2000-23-23-12

GLCS-FS-2000-23 (S or AL)-23-14AL-FS-2000-23-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2431 1/8

2431 1/8

2431 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”14’-2 1/8”14’-7 3/4”16’-2 1/8”16’-7 3/4”

555555

222222

28’10’12’14’

GLCSL-FS-2000-23 (S or AL)-28-10GLCSL-FS-2000-23 (S or AL)-28-12GLCSL-FS-2000-23 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

24’-8”24’-8”24’-8”

12’-4 1/2”14’-5 1/2”16’-6 1/2”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-23 (S or AL)-33-10AL-FS-2000-23-33-10

GLCS-FS-2000-23 (S or AL)-33-12AL-FS-2000-23-33-12

GLCS-FS-2000-23 (S or AL)-33-14AL-FS-2000-23-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

131913191319

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2431 1/8

2431 1/8

2431 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”14’-2 1/8”14’-7 3/4”16’-2 1/8”16’-7 3/4”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-23 (S or AL)-34-10GLCSLX-FS-2000-23 (S or AL)-34-12GLCSLX-FS-2000-23 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

242424

24’-8”24’-8”24’-8”

12’-7 1/8”14’-8 1/8”16’-9 1/8”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-23 (S or AL)-43-10AL-FS-2000-23-43-10

GLCS-FS-2000-23 (S or AL)-43-12AL-FS-2000-23-43-12

GLCS-FS-2000-23 (S or AL)-43-14AL-FS-2000-23-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

192619261926

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2431 1/8

2431 1/8

2431 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”14’-2 1/8”14’-7 3/4”16’-2 1/8”16’-7 3/4”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-23 (S or AL)-53-10AL-FS-2000-23-53-10

GLCSL-FS-2000-23 (S or AL)-53-10GLCS-FS-2000-23 (S or AL)-53-12

AL-FS-2000-23-53-12GLCSL-FS-2000-23 (S or AL)-53-12GLCS-FS-2000-23 (S or AL)-53-14

AL-FS-2000-23-53-14GLCSL-FS-2000-23 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

193019193019193019

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/815 1/214 7/814 7/815 1/214 7/814 7/815 1/214 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

2431 1/8

2424

31 1/82424

31 1/824

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-2 1/8”14’-7 3/4”14’-5 1/2”16’-2 1/8”16’-7 3/4”16’-6 1/2”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-23 (S or AL)-63-10AL-FS-2000-23-63-10

GLCS-FS-2000-23 (S or AL)-63-12AL-FS-2000-23-63-12

GLCS-FS-2000-23 (S or AL)-63-14AL-FS-2000-23-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

263626362636

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

2431 1/8

2431 1/8

2431 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”14’-2 1/8”14’-7 3/4”16’-2 1/8”16’-7 3/4”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-23 (S or AL)-64-10GLCSLX-FS-2000-23 (S or AL)-64-12GLCSLX-FS-2000-23 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

31 1/831 1/831 1/8

24’-8”24’-8”24’-8”

12’-7 1/8”14’-8 1/8”16’-9 1/8”

555

333

78’10’12’14’

GLCSL-FS-2000-23 (S or AL)-78-10GLCSL-FS-2000-23 (S or AL)-78-12GLCSL-FS-2000-23 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

16 1/816 1/816 1/8

232323

27 3/827 3/827 3/8

14 7/814 7/814 7/8

8 1/88 1/88 1/8

31 1/831 1/831 1/8

24’-8”24’-8”24’-8”

12’-4 1/2”14’-5 1/2”16’-6 1/2”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-23 (S or AL)-83-10AL-FS-2000-23-83-10

GLCS-FS-2000-23 (S or AL)-83-12AL-FS-2000-23-83-12

GLCS-FS-2000-23 (S or AL)-83-14AL-FS-2000-23-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

16 1/817

16 1/817

16 1/817

19 5/825 1/419 5/825 1/419 5/825 1/4

24-

24-

24-

14 7/815 1/214 7/815 1/214 7/815 1/2

8 1/88

8 1/88

8 1/88

31 1/831 1/831 1/831 1/831 1/831 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”14’-2 1/8”14’-7 3/4”16’-2 1/8”16’-7 3/4”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-23 (S or AL)-94-10GLCSLX-FS-2000-23 (S or AL)-94-12GLCSLX-FS-2000-23 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

31 1/831 1/831 1/8

24’-8”24’-8”24’-8”

12’-7 1/8”14’-8 1/8”16’-9 1/8”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-23 (S or AL)-103-10AL-FS-2000-23-103-10

GLCSL-FS-2000-23 (S or AL)-103-10GLCS-FS-2000-23 (S or AL)-103-12

AL-FS-2000-23-103-12GLCSL-FS-2000-23 (S or AL)-103-12GLCS-FS-2000-23 (S or AL)-103-14

AL-FS-2000-23-103-14GLCSL-FS-2000-23 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

16 1/817

16 1/816 1/8

1716 1/816 1/8

1716 1/8

19 5/825 1/4

2319 5/825 1/4

2319 5/825 1/4

23

24-

27 3/824-

27 3/824-

27 3/8

14 7/815 1/214 7/814 7/815 1/214 7/814 7/815 1/214 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

31 1/831 1/831 1/831 1/831 1/831 1/831 1/831 1/831 1/8

24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”24’-8”

12’-1 1/8”12’-6 3/4”12’-4 1/2”14’-2 1/8”14’-7 3/4”14’-5 1/2”16’-2 1/8”16’-7 3/4”16’-6 1/2”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-23 (S or AL)-124-10GLCSLX-FS-2000-23 (S or AL)-124-12GLCSLX-FS-2000-23 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

16 1/816 1/816 1/8

25 5/825 5/825 5/8

303030

14 7/814 7/814 7/8

8 1/88 1/88 1/8

31 1/831 1/831 1/8

24’-8”24’-8”24’-8”

12’-7 1/8”14’-8 1/8”16’-9 1/8”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

28’

23’

10’10’12’12’14’14’

GLCS-FS-2000-28 (S or AL)-23-10AL-FS-2000-28-23-10

GLCS-FS-2000-28 (S or AL)-23-12AL-FS-2000-28-23-12

GLCS-FS-2000-28 (S or AL)-23-14AL-FS-2000-28-23-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9139

139

13

25 7/821

25 7/821

25 7/821

2327 1/2

2327 1/2

2327 1/2

26-

26-

26-

18 1/417

18 1/417

18 1/417

8 1/88

8 1/88

8 1/88

34 1/237 7/834 1/237 7/834 1/237 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

14’-5 1/2”14’-10”

16’-6 1/2”16’-11”

555555

222222

28’10’12’14’

GLCSL-FS-2000-28 (S or AL)-28-10GLCSL-FS-2000-28 (S or AL)-28-12GLCSL-FS-2000-28 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

25 7/825 7/825 7/8

26 3/826 3/826 3/8

29 3/829 3/829 3/8

18 1/418 1/418 1/4

8 1/88 1/88 1/8

34 1/234 1/234 1/2

29’-8”29’-8”29’-8”

12’-8 7/8”14’-8 7/8”16’-9 7/8”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-28 (S or AL)-33-10AL-FS-2000-28-33-10

GLCS-FS-2000-28 (S or AL)-33-12AL-FS-2000-28-33-12

GLCS-FS-2000-28 (S or AL)-33-14AL-FS-2000-28-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

25 7/821

25 7/821

25 7/821

2327 1/2

2327 1/2

2327 1/2

26-

26-

26-

18 1/417

18 1/417

18 1/417

8 1/88

8 1/88

8 1/88

34 1/237 7/834 1/237 7/834 1/237 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

14’-5 1/2”14’-10”

16’-6 1/2”16’-11”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-28 (S or AL)-34-10GLCSLX-FS-2000-28 (S or AL)-34-12GLCSLX-FS-2000-28 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

25 7/825 7/825 7/8

292929

323232

18 1/418 1/418 1/4

8 1/88 1/88 1/8

34 1/234 1/234 1/2

29’-8”29’-8”29’-8”

12’-11 1/2”14’-11 1/2”17’-0 1/2”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-28 (S or AL)-43-10AL-FS-2000-28-43-10

GLCS-FS-2000-28 (S or AL)-43-12AL-FS-2000-28-43-12

GLCS-FS-2000-28 (S or AL)-43-14AL-FS-2000-28-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

25 7/821

25 7/821

25 7/821

2327 1/2

2327 1/2

2327 1/2

26-

26-

26-

18 1/417

18 1/417

18 1/417

8 1/88

8 1/88

8 1/88

34 1/237 7/834 1/237 7/834 1/237 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

14’-5 1/2”14’-10”

16’-6 1/2”16’-11”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-28 (S or AL)-53-10AL-FS-2000-28-53-10

GLCSL-FS-2000-28 (S or AL)-53-10GLCS-FS-2000-28 (S or AL)-53-12

AL-FS-2000-28-53-12GLCSL-FS-2000-28 (S or AL)-53-12GLCS-FS-2000-28 (S or AL)-53-14

AL-FS-2000-28-53-14GLCSL-FS-2000-28 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

25 7/821

25 7/825 7/8

2125 7/825 7/8

2125 7/8

2327 1/226 3/8

2327 1/226 3/8

2327 1/226 3/8

26-

29 3/826-

29 3/826-

29 3/8

18 1/417

18 1/418 1/4

1718 1/418 1/4

1718 1/4

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

34 1/237 7/834 1/234 1/237 7/834 1/234 1/237 7/834 1/2

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

12’-8 7/8”14’-5 1/2”

14’-10”14’-8 7/8”16’-6 1/2”

16’-11”16’-9 7/8”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-28 (S or AL)-63-10AL-FS-2000-28-63-10

GLCS-FS-2000-28 (S or AL)-63-12AL-FS-2000-28-63-12

GLCS-FS-2000-28 (S or AL)-63-14AL-FS-2000-28-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

25 7/821

25 7/821

25 7/821

2327 1/2

2327 1/2

2327 1/2

26-

26-

26-

18 1/417

18 1/417

18 1/417

8 1/88

8 1/88

8 1/88

34 1/237 7/834 1/237 7/834 1/237 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

14’-5 1/2”14’-10”

16’-6 1/2”16’-11”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-28 (S or AL)-64-10GLCSLX-FS-2000-28 (S or AL)-64-12GLCSLX-FS-2000-28 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

292929

323232

18 1/418 1/418 1/4

8 1/88 1/88 1/8

37 7/837 7/837 7/8

29’-8”29’-8”29’-8”

12’-11 1/2”14’-11 1/2”17’-0 1/2”

555

333

78’10’12’14’

GLCSL-FS-2000-28 (S or AL)-78-10GLCSL-FS-2000-28 (S or AL)-78-12GLCSL-FS-2000-28 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

26 3/826 3/826 3/8

29 3/829 3/829 3/8

18 1/418 1/418 1/4

8 1/88 1/88 1/8

37 7/837 7/837 7/8

29’-8”29’-8”29’-8”

12’-8 7/8”14’-8 7/8”16’-9 7/8”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-28 (S or AL)-83-10AL-FS-2000-28-83-10

GLCS-FS-2000-28 (S or AL)-83-12AL-FS-2000-28-83-12

GLCS-FS-2000-28 (S or AL)-83-14AL-FS-2000-28-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

25 7/821

25 7/821

25 7/821

2327 1/2

2327 1/2

2327 1/2

26-

26-

26-

18 1/417

18 1/417

18 1/417

8 1/88

8 1/88

8 1/88

37 7/837 7/837 7/837 7/837 7/837 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

14’-5 1/2”14’-10”

16’-6 1/2”16’-11”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-28 (S or AL)-94-10GLCSLX-FS-2000-28 (S or AL)-94-12GLCSLX-FS-2000-28 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

292929

323232

18 1/418 1/418 1/4

8 1/88 1/88 1/8

37 7/837 7/837 7/8

29’-8”29’-8”29’-8”

12’-11 1/2”14’-11 1/2”17’-0 1/2”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-28 (S or AL)-103-10AL-FS-2000-28-103-10

GLCSL-FS-2000-28 (S or AL)-103-10GLCS-FS-2000-28 (S or AL)-103-12

AL-FS-2000-28-103-12GLCSL-FS-2000-28 (S or AL)-103-12GLCS-FS-2000-28 (S or AL)-103-14

AL-FS-2000-28-103-14GLCSL-FS-2000-28 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

25 7/821

25 7/825 7/8

2125 7/825 7/8

2125 7/8

2327 1/226 3/8

2327 1/226 3/8

2327 1/226 3/8

26-

29 3/826-

29 3/826-

29 3/8

18 1/417

18 1/418 1/4

1718 1/418 1/4

1718 1/4

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

37 7/837 7/837 7/837 7/837 7/837 7/837 7/837 7/837 7/8

29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”29’-8”

12’-5 1/2”12’-10”

12’-8 7/8”14’-5 1/2”

14’-10”14’-8 7/8”16’-6 1/2”

16’-11”16’-9 7/8”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-28 (S or AL)-124-10GLCSLX-FS-2000-28 (S or AL)-124-12GLCSLX-FS-2000-28 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

292929

323232

18 1/418 1/418 1/4

8 1/88 1/88 1/8

37 7/837 7/837 7/8

29’-8”29’-8”29’-8”

12’-11 1/2”14’-11 1/2”17’-0 1/2”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

2000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

27

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

28

2000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

34’

28’10’12’14’

GLCSL-FS-2000-34 (S or AL)-28-10GLCSL-FS-2000-34 (S or AL)-28-12GLCSL-FS-2000-34 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

25 7/825 7/825 7/8

26 3/826 3/826 3/8

29 3/829 3/829 3/8

20 7/820 7/820 7/8

8 1/88 1/88 1/8

40 1/240 1/240 1/2

35’-8”35’-8”35’-8”

12’-9 7/8”14’-9 7/8”

16’-11 7/8”

555

222

33’

10’10’12’12’14’14’

GLCS-FS-2000-34 (S or AL)-33-10AL-FS-2000-34-33-10

GLCS-FS-2000-34 (S or AL)-33-12AL-FS-2000-34-33-12

GLCS-FS-2000-34 (S or AL)-33-14AL-FS-2000-34-33-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

9199

199

19

25 7/821

25 7/821

25 7/821

2527 1/2

2527 1/2

2527 1/2

26-

26-

26-

20 7/817 7/820 7/817 7/820 7/817 7/8

8 1/88

8 1/88

8 1/88

40 1/244 5/840 1/244 5/840 1/244 5/8

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

14’-8 1/2”14’-11”

16’-8 1/2”16’-11”

555555

333333

34’10’12’14’

GLCSLX-FS-2000-34 (S or AL)-34-10GLCSLX-FS-2000-34 (S or AL)-34-12GLCSLX-FS-2000-34 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

25 7/825 7/825 7/8

292929

323232

20 7/820 7/820 7/8

8 1/88 1/88 1/8

40 1/240 1/240 1/2

35’-8”35’-8”35’-8”

13’-2 1/2”15’-2 1/2”17’-2 1/2”

555

222

43’

10’10’12’12’14’14’

GLCS-FS-2000-34 (S or AL)-43-10AL-FS-2000-34-43-10

GLCS-FS-2000-34 (S or AL)-43-12AL-FS-2000-34-43-12

GLCS-FS-2000-34 (S or AL)-43-14AL-FS-2000-34-43-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

132613261326

25 7/821

25 7/821

25 7/821

2527 1/2

2527 1/2

2527 1/2

26-

26-

26-

20 7/817 7/820 7/817 7/820 7/817 7/8

8 1/88

8 1/88

8 1/88

40 1/244 5/840 1/244 5/840 1/244 5/8

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

14’-8 1/2”14’-11”

16’-8 1/2”16’-11”

555555

333333

53’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-34 (S or AL)-53-10AL-FS-2000-34-53-10

GLCSL-FS-2000-34 (S or AL)-53-10GLCS-FS-2000-34 (S or AL)-53-12

AL-FS-2000-34-53-12GLCSL-FS-2000-34 (S or AL)-53-12GLCS-FS-2000-34 (S or AL)-53-14

AL-FS-2000-34-53-14GLCSL-FS-2000-34 (S or AL)-53-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

133013133013133013

25 7/821

25 7/825 7/8

2125 7/825 7/8

2125 7/8

2527 1/226 3/8

2527 1/226 3/8

2527 1/226 3/8

26-

29 3/826-

29 3/826-

29 3/8

20 7/817 7/820 7/820 7/817 7/820 7/820 7/817 7/820 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

40 1/244 5/840 1/240 1/244 5/840 1/240 1/244 5/840 1/2

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

12’-9 7/8”14’-8 1/2”

14’-11”14’-9 7/8”16’-8 1/2”

16’-11”16’-11 7/8”

555555555

443443443

63’

10’10’12’12’14’14’

GLCS-FS-2000-34 (S or AL)-63-10AL-FS-2000-34-63-10

GLCS-FS-2000-34 (S or AL)-63-12AL-FS-2000-34-63-12

GLCS-FS-2000-34 (S or AL)-63-14AL-FS-2000-34-63-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

193619361936

25 7/821

25 7/821

25 7/821

2527 1/2

2527 1/2

2527 1/2

26-

26-

26-

20 7/817 7/820 7/817 7/820 7/817 7/8

8 1/88

8 1/88

8 1/88

40 1/244 5/840 1/244 5/840 1/244 5/8

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

14’-8 1/2”14’-11”

16’-8 1/2”16’-11”

555555

444444

64’10’12’14’

GLCSLX-FS-2000-34 (S or AL)-64-10GLCSLX-FS-2000-34 (S or AL)-64-12GLCSLX-FS-2000-34 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

292929

323232

20 7/820 7/820 7/8

8 1/88 1/88 1/8

44 5/844 5/844 5/8

35’-8”35’-8”35’-8”

13’-2 1/2”15’-2 1/2”17’-2 1/2”

555

333

78’10’12’14’

GLCSL-FS-2000-34 (S or AL)-78-10GLCSL-FS-2000-34 (S or AL)-78-12GLCSL-FS-2000-34 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

26 3/826 3/826 3/8

29 3/829 3/829 3/8

20 7/820 7/820 7/8

8 1/88 1/88 1/8

44 5/844 5/844 5/8

35’-8”35’-8”35’-8”

12’-9 7/8”14’-9 7/8”

16’-11 7/8”

555

444

83’

10’10’12’12’14’14’

GLCS-FS-2000-34 (S or AL)-83-10AL-FS-2000-34-83-10

GLCS-FS-2000-34 (S or AL)-83-12AL-FS-2000-34-83-12

GLCS-FS-2000-34 (S or AL)-83-14AL-FS-2000-34-83-14

SteelAlumSteelAlumSteelAlum

20’20’20’20’20’20’

464646464646

25 7/821

25 7/821

25 7/821

2527 1/2

2527 1/2

2527 1/2

26-

26-

26-

20 7/817 7/820 7/817 7/820 7/817 7/8

8 1/88

8 1/88

8 1/88

44 5/844 5/844 5/844 5/844 5/844 5/8

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

14’-8 1/2”14’-11”

16’-8 1/2”16’-11”

555555

555555

94’10’12’14’

GLCSLX-FS-2000-34 (S or AL)-94-10GLCSLX-FS-2000-34 (S or AL)-94-12GLCSLX-FS-2000-34 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

292929

323232

20 7/820 7/820 7/8

8 1/88 1/88 1/8

44 5/844 5/844 5/8

35’-8”35’-8”35’-8”

13’-2 1/2”15’-2 1/2”17’-2 1/2”

555

444

103’

10’10’10’12’12’12’14’14’14’

GLCS-FS-2000-34 (S or AL)-103-10AL-FS-2000-34-103-10

GLCSL-FS-2000-34 (S or AL)-103-10GLCS-FS-2000-34 (S or AL)-103-12

AL-FS-2000-34-103-12GLCSL-FS-2000-34 (S or AL)-103-12GLCS-FS-2000-34 (S or AL)-103-14

AL-FS-2000-34-103-14GLCSL-FS-2000-34 (S or AL)-103-14

SteelAlumSteelSteelAlumSteelSteelAlumSteel

20’20’25’20’20’25’20’20’25’

545454545454545454

25 7/821

25 7/825 7/8

2125 7/825 7/8

2125 7/8

2527 1/226 3/8

2527 1/226 3/8

2527 1/226 3/8

26-

29 3/826-

29 3/826-

29 3/8

20 7/817 7/820 7/820 7/817 7/820 7/820 7/817 7/820 7/8

8 1/88

8 1/88 1/8

88 1/88 1/8

88 1/8

44 5/844 5/844 5/844 5/844 5/844 5/844 5/844 5/844 5/8

35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”35’-8”

12’-8 1/2”12’-11”

12’-9 7/8”14’-8 1/2”

14’-11”14’-9 7/8”16’-8 1/2”

16’-11”16’-11 7/8”

555555555

665665665

124’10’12’14’

GLCSLX-FS-2000-34 (S or AL)-124-10GLCSLX-FS-2000-34 (S or AL)-124-12GLCSLX-FS-2000-34 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

292929

323232

20 7/820 7/820 7/8

8 1/88 1/88 1/8

44 5/844 5/844 5/8

35’-8”35’-8”35’-8”

13’-2 1/2”15’-2 1/2”17’-2 1/2”

555

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

15’

23’10’12’14’

GLCS-FS-4000-15 (S or AL)-23-10GLCS-FS-4000-15 (S or AL)-23-12GLCS-FS-4000-15 (S or AL)-23-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

222

28’10’12’14’

GLCSL-FS-4000-15 (S or AL)-28-10GLCSL-FS-4000-15 (S or AL)-28-12GLCSL-FS-4000-15 (S or AL)-28-14

SteelSteelSteel

25’25’25’

111111

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

222

33’10’12’14’

GLCS-FS-4000-15 (S or AL)-33-10GLCS-FS-4000-15 (S or AL)-33-12GLCS-FS-4000-15 (S or AL)-33-14

SteelSteelSteel

20’20’20’

131313

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

34’10’12’14’

GLCSLX-FS-4000-15 (S or AL)-34-10GLCSLX-FS-4000-15 (S or AL)-34-12GLCSLX-FS-4000-15 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

222

43’10’12’14’

GLCS-FS-4000-15 (S or AL)-43-10GLCS-FS-4000-15 (S or AL)-43-12GLCS-FS-4000-15 (S or AL)-43-14

SteelSteelSteel

20’20’20’

171717

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

53’

10’10’12’12’14’14’

GLCS-FS-4000-15 (S or AL)-53-10GLCSL-FS-4000-15 (S or AL)-53-10GLCS-FS-4000-15 (S or AL)-53-12

GLCSL-FS-4000-15 (S or AL)-53-12GLCS-FS-4000-15 (S or AL)-53-14

GLCSL-FS-4000-15 (S or AL)-53-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

191919191919

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

17’-0”17’-0”17’-0”17’-0”17’-0”17’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

434343

63’10’12’14’

GLCS-FS-4000-15 (S or AL)-63-10GLCS-FS-4000-15 (S or AL)-63-12GLCS-FS-4000-15 (S or AL)-63-14

SteelSteelSteel

20’20’20’

232323

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

444

64’10’12’14’

GLCSLX-FS-4000-15 (S or AL)-64-10GLCSLX-FS-4000-15 (S or AL)-64-12GLCSLX-FS-4000-15 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

333

78’10’12’14’

GLCSL-FS-4000-15 (S or AL)-78-10GLCSL-FS-4000-15 (S or AL)-78-12GLCSL-FS-4000-15 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

444

83’10’12’14’

GLCS-FS-4000-15 (S or AL)-83-10GLCS-FS-4000-15 (S or AL)-83-12GLCS-FS-4000-15 (S or AL)-83-14

SteelSteelSteel

20’20’20’

464646

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

555

94’10’12’14’

GLCSLX-FS-4000-15 (S or AL)-94-10GLCSLX-FS-4000-15 (S or AL)-94-12GLCSLX-FS-4000-15 (S or AL)-94-14

SteelSteelSteel

30’30’30’

535353

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

444

103’

10’10’12’12’14’14’

GLCS-FS-4000-15 (S or AL)-103-10GLCSL-FS-4000-15 (S or AL)-103-10GLCS-FS-4000-15 (S or AL)-103-12

GLCSL-FS-4000-15 (S or AL)-103-12GLCS-FS-4000-15 (S or AL)-103-14

GLCSL-FS-4000-15 (S or AL)-103-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

545454545454

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

17’-0”17’-0”17’-0”17’-0”17’-0”17’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

656565

124’10’12’14’

GLCSLX-FS-4000-15 (S or AL)-124-10GLCSLX-FS-4000-15 (S or AL)-124-12GLCSLX-FS-4000-15 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

17’-0”17’-0”17’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

4000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

29

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

30

4000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

20’

23’10’12’14’

GLCS-FS-4000-20 (S or AL)-23-10GLCS-FS-4000-20 (S or AL)-23-12GLCS-FS-4000-20 (S or AL)-23-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

222

28’10’12’14’

GLCSL-FS-4000-20 (S or AL)-28-10GLCSL-FS-4000-20 (S or AL)-28-12GLCSL-FS-4000-20 (S or AL)-28-14

SteelSteelSteel

25’25’25’

111111

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

222

33’10’12’14’

GLCS-FS-4000-20 (S or AL)-33-10GLCS-FS-4000-20 (S or AL)-33-12GLCS-FS-4000-20 (S or AL)-33-14

SteelSteelSteel

20’20’20’

131313

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

34’10’12’14’

GLCSLX-FS-4000-20 (S or AL)-34-10GLCSLX-FS-4000-20 (S or AL)-34-12GLCSLX-FS-4000-20 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

222

43’10’12’14’

GLCS-FS-4000-20 (S or AL)-43-10GLCS-FS-4000-20 (S or AL)-43-12GLCS-FS-4000-20 (S or AL)-43-14

SteelSteelSteel

20’20’20’

171717

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

53’

10’10’12’12’14’14’

GLCS-FS-4000-20 (S or AL)-53-10GLCSL-FS-4000-20 (S or AL)-53-10GLCS-FS-4000-20 (S or AL)-53-12

GLCSL-FS-4000-20 (S or AL)-53-12GLCS-FS-4000-20 (S or AL)-53-14

GLCSL-FS-4000-20 (S or AL)-53-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

191919191919

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

22’-0”22’-0”22’-0”22’-0”22’-0”22’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

434343

63’10’12’14’

GLCS-FS-4000-20 (S or AL)-63-10GLCS-FS-4000-20 (S or AL)-63-12GLCS-FS-4000-20 (S or AL)-63-14

SteelSteelSteel

20’20’20’

232323

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

444

64’10’12’14’

GLCSLX-FS-4000-20 (S or AL)-64-10GLCSLX-FS-4000-20 (S or AL)-64-12GLCSLX-FS-4000-20 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

333

78’10’12’14’

GLCSL-FS-4000-20 (S or AL)-78-10GLCSL-FS-4000-20 (S or AL)-78-12GLCSL-FS-4000-20 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

444

83’10’12’14’

GLCS-FS-4000-20 (S or AL)-83-10GLCS-FS-4000-20 (S or AL)-83-12GLCS-FS-4000-20 (S or AL)-83-14

SteelSteelSteel

20’20’20’

464646

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

555

94’10’12’14’

GLCSLX-FS-4000-20 (S or AL)-94-10GLCSLX-FS-4000-20 (S or AL)-94-12GLCSLX-FS-4000-20 (S or AL)-94-14

SteelSteelSteel

30’30’30’

535353

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

444

103’

10’10’12’12’14’14’

GLCS-FS-4000-20 (S or AL)-103-10GLCSL-FS-4000-20 (S or AL)-103-10GLCS-FS-4000-20 (S or AL)-103-12

GLCSL-FS-4000-20 (S or AL)-103-12GLCS-FS-4000-20 (S or AL)-103-14

GLCSL-FS-4000-20 (S or AL)-103-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

545454545454

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

22’-0”22’-0”22’-0”22’-0”22’-0”22’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

656565

124’10’12’14’

GLCSLX-FS-4000-20 (S or AL)-124-10GLCSLX-FS-4000-20 (S or AL)-124-12GLCSLX-FS-4000-20 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

22’-0”22’-0”22’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

23’

23’10’12’14’

GLCS-FS-4000-23 (S or AL)-23-10GLCS-FS-4000-23 (S or AL)-23-12GLCS-FS-4000-23 (S or AL)-23-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

222

28’10’12’14’

GLCSL-FS-4000-23 (S or AL)-28-10GLCSL-FS-4000-23 (S or AL)-28-12GLCSL-FS-4000-23 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

222

33’10’12’14’

GLCS-FS-4000-23 (S or AL)-33-10GLCS-FS-4000-23 (S or AL)-33-12GLCS-FS-4000-23 (S or AL)-33-14

SteelSteelSteel

20’20’20’

131313

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

34’10’12’14’

GLCSLX-FS-4000-23 (S or AL)-34-10GLCSLX-FS-4000-23 (S or AL)-34-12GLCSLX-FS-4000-23 (S or AL)-34-14

SteelSteelSteel

30’30’30’

131313

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

222

43’10’12’14’

GLCS-FS-4000-23 (S or AL)-43-10GLCS-FS-4000-23 (S or AL)-43-12GLCS-FS-4000-23 (S or AL)-43-14

SteelSteelSteel

20’20’20’

191919

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

333

53’

10’10’12’12’14’14’

GLCS-FS-4000-23 (S or AL)-53-10GLCSL-FS-4000-23 (S or AL)-53-10GLCS-FS-4000-23 (S or AL)-53-12

GLCSL-FS-4000-23 (S or AL)-53-12GLCS-FS-4000-23 (S or AL)-53-14

GLCSL-FS-4000-23 (S or AL)-53-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

191919191919

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

30’-0”30’-0”30’-0”30’-0”30’-0”30’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

434343

63’10’12’14’

GLCS-FS-4000-23 (S or AL)-63-10GLCS-FS-4000-23 (S or AL)-63-12GLCS-FS-4000-23 (S or AL)-63-14

SteelSteelSteel

20’20’20’

262626

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

444

64’10’12’14’

GLCSLX-FS-4000-23 (S or AL)-64-10GLCSLX-FS-4000-23 (S or AL)-64-12GLCSLX-FS-4000-23 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

333

78’10’12’14’

GLCSL-FS-4000-23 (S or AL)-78-10GLCSL-FS-4000-23 (S or AL)-78-12GLCSL-FS-4000-23 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-1 7/8”15’-1 7/8”17’-1 7/8”

777

444

83’10’12’14’

GLCS-FS-4000-23 (S or AL)-83-10GLCS-FS-4000-23 (S or AL)-83-12GLCS-FS-4000-23 (S or AL)-83-14

SteelSteelSteel

20’20’20’

464646

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

12’-11 7/8”14’-11 7/8”16’-11 7/8”

777

555

94’10’12’14’

GLCSLX-FS-4000-23 (S or AL)-94-10GLCSLX-FS-4000-23 (S or AL)-94-12GLCSLX-FS-4000-23 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

444

103’

10’10’12’12’14’14’

GLCS-FS-4000-23 (S or AL)-103-10GLCSL-FS-4000-23 (S or AL)-103-10GLCS-FS-4000-23 (S or AL)-103-12

GLCSL-FS-4000-23 (S or AL)-103-12GLCS-FS-4000-23 (S or AL)-103-14

GLCSL-FS-4000-23 (S or AL)-103-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

545454545454

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

21 3/821 3/821 3/821 3/821 3/821 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

38 1/238 1/238 1/238 1/238 1/238 1/2

30’-0”30’-0”30’-0”30’-0”30’-0”30’-0”

12’-11 7/8”13’-1 7/8”

14’-11 7/8”15’-1 7/8”

16’-11 7/8”17’-1 7/8”

777777

656565

124’10’12’14’

GLCSLX-FS-4000-23 (S or AL)-124-10GLCSLX-FS-4000-23 (S or AL)-124-12GLCSLX-FS-4000-23 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

21 3/821 3/821 3/8

15 1/815 1/815 1/8

38 1/238 1/238 1/2

30’-0”30’-0”30’-0”

13’-3 7/8”15’-3 7/8”17’-3 7/8”

777

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

4000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

31

FREE STA

ND

ING

WO

RK

STATION

CR

AN

ES

32

4000# CAPACITYFREE STANDING WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

28’

23’10’12’14’

GLCS-FS-4000-28 (S or AL)-23-10GLCS-FS-4000-28 (S or AL)-23-12GLCS-FS-4000-28 (S or AL)-23-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-0 7/8”15’-0 7/8”17’-0 7/8”

777

222

28’10’12’14’

GLCSL-FS-4000-28 (S or AL)-28-10GLCSL-FS-4000-28 (S or AL)-28-12GLCSL-FS-4000-28 (S or AL)-28-14

SteelSteelSteel

25’25’25’

999

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

222

33’10’12’14’

GLCS-FS-4000-28 (S or AL)-33-10GLCS-FS-4000-28 (S or AL)-33-12GLCS-FS-4000-28 (S or AL)-33-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-0 7/8”15’-0 7/8”17’-0 7/8”

777

333

34’10’12’14’

GLCSLX-FS-4000-28 (S or AL)-34-10GLCSLX-FS-4000-28 (S or AL)-34-12GLCSLX-FS-4000-28 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

222

43’10’12’14’

GLCS-FS-4000-28 (S or AL)-43-10GLCS-FS-4000-28 (S or AL)-43-12GLCS-FS-4000-28 (S or AL)-43-14

SteelSteelSteel

20’20’20’

131313

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-0 7/8”15’-0 7/8”17’-0 7/8”

777

333

53’

10’10’12’12’14’14’

GLCS-FS-4000-28 (S or AL)-53-10GLCSL-FS-4000-28 (S or AL)-53-10GLCS-FS-4000-28 (S or AL)-53-12

GLCSL-FS-4000-28 (S or AL)-53-12GLCS-FS-4000-28 (S or AL)-53-14

GLCSL-FS-4000-28 (S or AL)-53-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

131313131313

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

23 3/823 3/823 3/823 3/823 3/823 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

41 1/241 1/241 1/241 1/241 1/241 1/2

36’-0”36’-0”36’-0”36’-0”36’-0”36’-0”

13’-0 7/8”13’-2 7/8”15’-0 7/8”15’-2 7/8”17’-0 7/8”17’-2 7/8”

777777

434343

63’10’12’14’

GLCS-FS-4000-28 (S or AL)-63-10GLCS-FS-4000-28 (S or AL)-63-12GLCS-FS-4000-28 (S or AL)-63-14

SteelSteelSteel

20’20’20’

191919

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

41 1/241 1/241 1/2

36’-0”36’-0”36’-0”

13’-0 7/8”15’-0 7/8”17’-0 7/8”

777

444

64’10’12’14’

GLCSLX-FS-4000-28 (S or AL)-64-10GLCSLX-FS-4000-28 (S or AL)-64-12GLCSLX-FS-4000-28 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

44 7/844 7/844 7/8

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

333

78’10’12’14’

GLCSL-FS-4000-28 (S or AL)-78-10GLCSL-FS-4000-28 (S or AL)-78-12GLCSL-FS-4000-28 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

44 7/844 7/844 7/8

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

444

83’10’12’14’

GLCS-FS-4000-28 (S or AL)-83-10GLCS-FS-4000-28 (S or AL)-83-12GLCS-FS-4000-28 (S or AL)-83-14

SteelSteelSteel

20’20’20’

464646

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

44 7/844 7/844 7/8

36’-0”36’-0”36’-0”

13’-0 7/8”15’-0 7/8”17’-0 7/8”

777

555

94’10’12’14’

GLCSLX-FS-4000-28 (S or AL)-94-10GLCSLX-FS-4000-28 (S or AL)-94-12GLCSLX-FS-4000-28 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

44 7/844 7/844 7/8

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

444

103’

10’10’12’12’14’14’

GLCS-FS-4000-28 (S or AL)-103-10GLCSL-FS-4000-28 (S or AL)-103-10GLCS-FS-4000-28 (S or AL)-103-12

GLCSL-FS-4000-28 (S or AL)-103-12GLCS-FS-4000-28 (S or AL)-103-14

GLCSL-FS-4000-28 (S or AL)-103-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

545454545454

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

23 3/823 3/823 3/823 3/823 3/823 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

44 7/844 7/844 7/844 7/844 7/844 7/8

36’-0”36’-0”36’-0”36’-0”36’-0”36’-0”

13’-0 7/8”13’-2 7/8”15’-0 7/8”15’-2 7/8”17’-0 7/8”17’-2 7/8”

777777

656565

124’10’12’14’

GLCSLX-FS-4000-28 (S or AL)-124-10GLCSLX-FS-4000-28 (S or AL)-124-12GLCSLX-FS-4000-28 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

23 3/823 3/823 3/8

15 1/815 1/815 1/8

44 7/844 7/844 7/8

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

FREE STANDING WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH TS MODEL NUMBER TRACK

MAT.

RUNWAY BRIDGE SUPPORT STRUCTUREMAX.

L1L7 in

L8in

H3in

H3Ain

H4in

L3in

L6in OAW OAH D

in

SPT*

34’

28’10’12’14’

GLCSL-FS-4000-34 (S or AL)-28-10GLCSL-FS-4000-34 (S or AL)-28-12GLCSL-FS-4000-34 (S or AL)-28-14

SteelSteelSteel

25’25’25’

131313

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

47 1/247 1/247 1/2

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

222

33’10’12’14’

GLCS-FS-4000-34 (S or AL)-33-10GLCS-FS-4000-34 (S or AL)-33-12GLCS-FS-4000-34 (S or AL)-33-14

SteelSteelSteel

20’20’20’

999

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

47 1/247 1/247 1/2

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

333

34’10’12’14’

GLCSLX-FS-4000-34 (S or AL)-34-10GLCSLX-FS-4000-34 (S or AL)-34-12GLCSLX-FS-4000-34 (S or AL)-34-14

SteelSteelSteel

30’30’30’

999

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

47 1/247 1/247 1/2

36’-0”36’-0”36’-0”

13’-6 7/8”15’-6 7/8”17’-6 7/8”

777

222

43’10’12’14’

GLCS-FS-4000-34 (S or AL)-43-10GLCS-FS-4000-34 (S or AL)-43-12GLCS-FS-4000-34 (S or AL)-43-14

SteelSteelSteel

20’20’20’

131313

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

47 1/247 1/247 1/2

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

333

53’

10’10’12’12’14’14’

GLCS-FS-4000-34 (S or AL)-53-10GLCSL-FS-4000-34 (S or AL)-53-10GLCS-FS-4000-34 (S or AL)-53-12

GLCSL-FS-4000-34 (S or AL)-53-12GLCS-FS-4000-34 (S or AL)-53-14

GLCSL-FS-4000-34 (S or AL)-53-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

131313131313

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

25 3/825 3/825 3/825 3/825 3/825 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

47 1/247 1/247 1/247 1/247 1/247 1/2

36’-0”36’-0”36’-0”36’-0”36’-0”36’-0”

13’-2 7/8”13’-4 7/8”15’-2 7/8”15’-4 7/8”17’-2 7/8”17’-4 7/8”

777777

434343

63’10’12’14’

GLCS-FS-4000-34 (S or AL)-63-10GLCS-FS-4000-34 (S or AL)-63-12GLCS-FS-4000-34 (S or AL)-63-14

SteelSteelSteel

20’20’20’

191919

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

47 1/247 1/247 1/2

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

444

64’10’12’14’

GLCSLX-FS-4000-34 (S or AL)-64-10GLCSLX-FS-4000-34 (S or AL)-64-12GLCSLX-FS-4000-34 (S or AL)-64-14

SteelSteelSteel

30’30’30’

363636

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

51 5/851 5/851 5/8

36’-0”36’-0”36’-0”

13’-6 7/8”15’-6 7/8”17’-6 7/8”

777

333

78’10’12’14’

GLCSL-FS-4000-34 (S or AL)-78-10GLCSL-FS-4000-34 (S or AL)-78-12GLCSL-FS-4000-34 (S or AL)-78-14

SteelSteelSteel

25’25’25’

464646

25 7/825 7/825 7/8

31 3/831 3/831 3/8

34 1/234 1/234 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

51 5/851 5/851 5/8

36’-0”36’-0”36’-0”

13’-4 7/8”15’-4 7/8”17’-4 7/8”

777

444

83’10’12’14’

GLCS-FS-4000-34 (S or AL)-83-10GLCS-FS-4000-34 (S or AL)-83-12GLCS-FS-4000-34 (S or AL)-83-14

SteelSteelSteel

20’20’20’

464646

25 7/825 7/825 7/8

29 3/829 3/829 3/8

32 1/232 1/232 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

51 5/851 5/851 5/8

36’-0”36’-0”36’-0”

13’-2 7/8”15’-2 7/8”17’-2 7/8”

777

555

94’10’12’14’

GLCSLX-FS-4000-34 (S or AL)-94-10GLCSLX-FS-4000-34 (S or AL)-94-12GLCSLX-FS-4000-34 (S or AL)-94-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

51 5/851 5/851 5/8

36’-0”36’-0”36’-0”

13’-6 7/8”15’-6 7/8”17’-6 7/8”

777

444

103’

10’10’12’12’14’14’

GLCS-FS-4000-34 (S or AL)-103-10GLCSL-FS-4000-34 (S or AL)-103-10GLCS-FS-4000-34 (S or AL)-103-12

GLCSL-FS-4000-34 (S or AL)-103-12GLCS-FS-4000-34 (S or AL)-103-14

GLCSL-FS-4000-34 (S or AL)-103-14

SteelSteelSteelSteelSteelSteel

20’25’20’25’20’25’

545454545454

25 7/825 7/825 7/825 7/825 7/825 7/8

29 3/831 3/829 3/831 3/829 3/831 3/8

32 1/234 1/232 1/234 1/232 1/234 1/2

25 3/825 3/825 3/825 3/825 3/825 3/8

15 1/815 1/815 1/815 1/815 1/815 1/8

51 5/851 5/851 5/851 5/851 5/851 5/8

36’-0”36’-0”36’-0”36’-0”36’-0”36’-0”

13’-2 7/8”13’-4 7/8”15’-2 7/8”15’-4 7/8”17’-2 7/8”17’-4 7/8”

777777

656565

124’10’12’14’

GLCSLX-FS-4000-34 (S or AL)-124-10GLCSLX-FS-4000-34 (S or AL)-124-12GLCSLX-FS-4000-34 (S or AL)-124-14

SteelSteelSteel

30’30’30’

545454

25 7/825 7/825 7/8

33 3/833 3/833 3/8

36 1/236 1/236 1/2

25 3/825 3/825 3/8

15 1/815 1/815 1/8

51 5/851 5/851 5/8

36’-0”36’-0”36’-0”

13’-6 7/8”15’-6 7/8”17’-6 7/8”

777

555

*This column provides the total number of support assemblies based on the “L1” dimensions shown. Support assemblies are designed to AISC specifi ca ons and do not require bracing. If no movement of the support assembly is preferred, then bracing to the building steel is recommended (not included).

To Determine Hook Coverage: [Bridge Travel on Runway = Runway Length - (2xL8)] by [Hoist Trolley Travel on Bridge = Bridge Length - L3 - L6] (L6 allows for festoon stack-up).

Gorbel® Free Standing Work Sta on Bridge Crane Kits include: bridge, runways, the appropriate number of support assemblies, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Hoist and anchor bolts provided by others.

Dimensions are for reference only and are subject to change without no ce.

4000# CAPACITYFR

EE S

TAN

DIN

G W

OR

KST

ATIO

N C

RA

NES

33

STEELCEILING MOUNTED WORK STATION BRIDGE CRANES

ISOMETRIC VIEW

34

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)

Gorbel® Ceiling Mounted Bridge Cranes include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

L1

L1

L7

RUNWAY LENGTH

BRIDGE LENGTH (L)

L1

L1

L1

L1

L7

RUNWAY LENGTH

BRIDGE LENGTH (L)

GLC

GLCS(L,LX)

ALUMINUMCEILING MOUNTED WORK STATION BRIDGE CRANES

ISOMETRIC VIEW

35

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)

Gorbel® Ceiling Mounted Bridge Cranes include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

L1

L1

L7

RUNWAY LENGTH

BRIDGE LENGTH (L)

STEELCEILING MOUNTED WORK STATION BRIDGE CRANES

36

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)

Gorbel® Ceiling Mounted Bridge Cranes include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

STEEL TRACK BRIDGE ON STEEL RUNWAYS

ALUMINUM TRACK BRIDGE ON STEEL RUNWAYS

COPED ALUMIINUM TRACK BRIDGE ON STEEL RUNWAYS

(L-L4)/2

H2

L3

L4

HOIST TROLLEY

BRIDGE LENGTH (L)

H4

C

L6

H3

H4(L-L4)/2

T1

(L-L4)/2

L3

L4

HOIST TROLLEY

BRIDGE LENGTH (L)

C

L6

H3AH4

(L-L4)/2

T1H2

(L-L4)/2

L3

L4

HOIST TROLLEYBRIDGE LENGTH (L)

C

L6

SEE NOTE**

H4(L-L4)/2

T1H2

Note**:250 SERIES = H3A - 3.25”500 SERIES = H3A - 5.12”1000 & 2000 SERIES STANDARD BRIDGES ARE A COPED 2-PIECE DESIGN

END VIEW

END VIEW

END VIEW

H2 L8

12” L1 L1 L1

RUNWAY LENGTH

8” MAX

L1 L1

SPLICE JOINT

HANGER

L1 12”

L8

L7

ENDTRUCK

GLC STEEL RUNWAY

SIDE VIEW

H2 L8

18” GLCS, GLCSL L1

RUNWAY LENGTH

48” MAXSPLICE JOINT

AND PLATE

HANGERL1

L8

L7

ENDTRUCK

GLCS, GLCSL, GLCSLXSTEEL RUNWAY

SIDE VIEW

H1

24” GLCSLX

18” GLCS, GLCSL24” GLCSLX

ALUMINUMCEILING MOUNTED WORK STATION BRIDGE CRANES

37

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)

Gorbel® Ceiling Mounted Bridge Cranes include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

ALUMINUM TRACK BRIDGE ON ALUMINUM RUNWAYS

COPED ALUMINUM TRACK BRIDGE ON ALUMINUM RUNWAYS

(L-L4)/2

L3

L4

HOIST TROLLEY

BRIDGE LENGTH (L)

C

L6

H3H4

(L-L4)/2

T1H2

END VIEW

(L-L4)/2

L3

L4

HOIST TROLLEY

BRIDGE LENGTH (L)

C

L6

SEE NOTE**

H4

(L-L4)/2

T1H2

END VIEW

Note**:250 SERIES = H3 - 3.25”500 SERIES = H3 - 5.12”1000 & 2000 SERIES STANDARD BRIDGES ARE A COPED 2-PIECE DESIGN

H2

L8

18”

RUNWAY LENGTH

30” MAX

L1

SPLICE JOINT

HANGERL1 18”

L8

L7

ENDTRUCK

ALUMINUM RUNWAY

SIDE VIEW

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

8’

11’-6”GLC250-8 (S or AL)-11.5

GLCS250-8 (S or AL)-11.5AL250-8-11.5

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

77

13 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

999

10 3/410 3/413 1/4

6 @ 379#4 @ 462#4 @ 443#

23’GLC250-8 (S or AL)-23

GLCS250-8 (S or AL)-23AL250-8-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

77

13 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

99

14

10 3/410 3/413 1/4

10 @ 379#4 @ 462#4 @ 443#

28’ GLCSL250-8 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 6’-6” 7 14 15/16 22 11/16 4 3/4 1 3/4 11 9 10 3/4 4 @ 574#

33’GLC250-8 (S or AL)-33

GLCS250-8 (S or AL)-33AL250-8-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

77

13 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

99

20

10 3/410 3/413 1/4

14 @ 379#6 @ 462#6 @ 443#

43’GLC250-8 (S or AL)-43

GLCS250-8 (S or AL)-43AL250-8-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

77

13 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

131327

10 3/410 3/413 1/4

18 @ 379#6 @ 462#6 @ 443#

53’

GLC250-8 (S or AL)-53GLCS250-8 (S or AL)-53

AL250-8-53GLCSL250-8 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

6’-6”6’-6”6’-6”6’-6”

77

13 7/87

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

4 3/44 3/4

10 11/164 3/4

1 3/41 3/4

81 3/4

-9-

11

13133013

10 3/410 3/413 1/410 3/4

22 @ 379#8 @ 462#8 @ 443#6 @ 574#

63’GLC250-8 (S or AL)-63

GLCS250-8 (S or AL)-63AL250-8-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

77

13 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

191937

10 3/410 3/413 1/4

26 @ 379#8 @ 462#8 @ 443#

78’ GLCSL250-8 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 6’-6” 11 3/4 14 15/16 22 11/16 4 3/4 1 3/4 11 54 10 3/4 8 @ 574#

83’GLC250-8 (S or AL)-83

GLCS250-8 (S or AL)-83AL250-8-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

6’-6”6’-6”6’-6”

11 3/411 3/413 7/8

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

545447

10 3/410 3/413 1/4

34 @ 579#10 @ 462#10 @ 443#

103’

GLC250-8 (S or AL)-103GLCS250-8 (S or AL)-103

AL250-8-103GLCSL250-8 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

6’-6”6’-6”6’-6”6’-6”

11 3/411 3/413 7/811 3/4

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

4 3/44 3/4

10 11/164 3/4

1 3/41 3/4

81 3/4

-9-

11

54545354

10 3/410 3/413 1/410 3/4

42 @ 379#12 @ 462#12 @ 443#10 @ 574#

10’

11’-6”GLC250-10 ( S or AL)-11.5

GLCS250-10 (S or AL)-11.5AL250-10-11.5

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

999

10 3/410 3/413 1/4

6 @ 382#4 @ 465#4 @ 446#

23’GLC250-10 (S or AL)-23

GLCS250-10 (S or AL)-23AL250-10-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

99

14

10 3/410 3/413 1/4

10 @ 382#4 @ 465#4 @ 446#

28’ GLCSL250-10 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 8’-0” 8 1/4 14 15/16 22 11/16 4 3/4 1 3/4 11 9 10 3/4 4 @ 578#

33’GLC250-10 (S or AL)-33

GLCS250-10 (S or AL)-33AL250-10-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

99

20

10 3/410 3/413 1/4

14 @ 382#6 @ 465#6 @ 446#

43’GLC250-10 (S or AL)-43

GLCS250-10 (S or AL)-43AL250-10-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

131327

10 3/410 3/413 1/4

18 @ 382#6 @ 465#6 @ 446#

53’

GLC250-10 (S or AL)-53GLCS250-10 (S or AL)-53

AL250-10-53GLCSL250-10 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

8’-0”8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/48 1/4

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

4 3/44 3/4

10 11/164 3/4

1 3/41 3/4

81 3/4

-9-

11

13133013

10 3/410 3/413 1/410 3/4

22 @ 382#8 @ 465#8 @ 446#6 @ 578#

63’GLC250-10 (S or AL)-63

GLCS250-10 (S or AL)-63AL250-10-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

8 1/48 1/4

17 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

191937

10 3/410 3/413 1/4

26 @ 382#8 @ 465#8 @ 446#

78’ GLCSL250-10 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 8’-0” 15 1/8 14 15/16 22 11/16 4 3/4 1 3/4 11 54 10 3/4 8 @ 578#

83’GLC250-10 (S or AL)-83

GLCS250-10 (S or AL)-83AL250-10-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

8’-0”8’-0”8’-0”

15 1/815 1/817 1/4

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

4 3/44 3/4

10 11/16

1 3/41 3/4

8

-9-

545447

10 3/410 3/413 1/4

34 @ 382#10 @ 465#10 @ 446#

103’

GLC250-10 (S or AL)-103GLCS250-10 (S or AL)-103

AL250-10-103GLCSL250-10 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

8’-0”8’-0”8’-0”8’-0”

15 1/815 1/817 1/415 1/8

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

4 3/44 3/4

10 11/164 3/4

1 3/41 3/4

81 3/4

-9-

11

54545354

10 3/410 3/413 1/410 3/4

42 @ 382#12 @ 465#12 @ 446#10 @ 578#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

38

250# CAPACITYC

EILING

MO

UN

TED W

OR

KSTATIO

N B

RID

GE C

RA

NES

250# CAPACITY

39

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

15’

23’GLC250-15 (S or AL)-23

GLCS250-15 (S or AL)-23AL250-15-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

13’-0”13’-0”13’-0”

10 3/410 3/4

23 15/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

14

10 3/410 3/413 1/4

10 @ 398#4 @ 481#4 @ 456#

28’ GLCSL250-15 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 13’-0” 10 3/4 14 15/16 22 11/16 10 1/2 1 3/4 11 9 10 3/4 4 @ 593#

33’GLC250-15 (S or AL)-33

GLCS250-15 (S or AL)-33AL250-15-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

13’-0”13’-0”13’-0”

10 3/410 3/4

23 15/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

20

10 3/410 3/413 1/4

14 @ 398#6 @ 481#6 @ 456#

43’GLC250-15 (S or AL)-43

GLCS250-15 (S or AL)-43AL250-15-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

13’-0”13’-0”13’-0”

10 3/410 3/4

23 15/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

131327

10 3/410 3/413 1/4

18 @ 396#6 @ 481#6 @ 456#

53’

GLC250-15 (S or AL)-53GLCS250-15 (S or AL)-53

AL250-15-53GLCSL250-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

13’-0”13’-0”13’-0”13’-0”

10 3/410 3/4

23 15/1610 3/4

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

13133013

10 3/410 3/413 1/410 3/4

22 @ 398#8 @ 481#8 @ 456#6 @ 593#

63’GLC250-15 (S or AL)-63

GLCS250-15 (S or AL)-63AL250-15-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

13’-0”13’-0”13’-0”

10 3/410 3/4

23 15/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

191937

10 3/410 3/413 1/4

26 @ 398#8 @ 481#8 @ 456#

78’ GLCSL250-15 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 13’-0” 21 13/16 14 15/16 22 11/16 10 1/2 1 3/4 11 54 10 3/4 8 @ 593#

83’GLC250-15 (S or AL)-83

GLCS250-15 (S or AL)-83AL250-15-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

13’-0”13’-0”13’-0”

21 13/1621 13/1623 15/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

545447

10 3/410 3/413 1/4

34 @ 398#10 @ 481#10 @ 456#

103’

GLC250-15 (S or AL)-103GLCS250-15 (S or AL)-103

AL250-15-103GLCSL250-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

13’-0”13’-0”13’-0”13’-0”

21 13/1621 13/1623 15/1621 13/16

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

54545354

10 3/410 3/413 1/410 3/4

42 @ 398#12 @ 481#12 @ 456#10 @ 593#

20’

23’GLC250-20 (S or AL)-23

GLCS250-20 (S or AL)-23AL250-20-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

18’-0”18’-0”18’-0”

1212

27 5/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

14

10 3/410 3/413 1/4

10 @ 410#4 @ 493#4 @ 466#

28’ GLCSL250-20 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 18’-0” 12 14 15/16 22 11/16 10 1/2 1 3/4 11 9 10 3/4 4 @ 606#

33’GLC250-20 (S or AL)-33

GLCS250-20 (S or AL)-33AL250-20-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

18’-0”18’-0”18’-0”

1212

27 5/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

20

10 3/410 3/413 1/4

14 @ 410#6 @ 493#6 @ 466#

43’GLC250-20 (S or AL)-43

GLCS250-20 (S or AL)-43AL250-20-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

18’-0”18’-0”18’-0”

1212

27 5/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

131327

10 3/410 3/413 1/4

18 @ 410#6 @ 493#6 @ 466#

53’

GLC250-20 (S or AL)-53GLCS250-20 (S or AL)-53

AL250-20-53GLCSL250-20 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

18’-0”18’-0”18’-0”18’-0”

1212

27 5/1612

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

13133013

10 3/410 3/413 1/410 3/4

22 @ 410#8 @ 493#8 @ 466#6 @ 606#

63’GLC250-20 (S or AL)-63

GLCS250-20 (S or AL)-63AL250-20-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

18’-0”18’-0”18’-0”

1212

27 5/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

191937

10 3/410 3/413 1/4

26 @ 410#8 @ 493#8 @ 466#

78’ GLCSL250-20 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 18’-0” 25 3/16 14 15/16 22 11/16 10 1/2 1 3/4 11 54 10 3/4 8 @ 606#

83’GLC250-20 (S or AL)-83

GLCS250-20 (S or AL)-83AL250-20-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

18’-0”18’-0”18’-0”

25 3/1625 3/1627 5/16

5 11/1612 15/1619 15/16

13 7/1620 11/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

545447

10 3/410 3/413 1/4

34 @ 410#10 @ 493#10 @ 466#

103’

GLC250-20 (S or AL)-103GLCS250-20 (S or AL)-103

AL250-20-103GLCSL250-20 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

18’-0”18’-0”18’-0”18’-0”

25 3/1625 3/1627 5/1625 3/16

5 11/1612 15/1619 15/1614 15/16

13 7/1620 11/16

-22 11/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

54545354

10 3/410 3/413 1/410 3/4

42 @ 410#12 @ 493#12 @ 466#10 @ 606#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

23’

23’GLC250-23 (S or AL)-23

GLCS250-23 (S or AL)-23AL250-23-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

21’-0”21’-0”20’-0”

13 1/413 1/430 5/8

5 11/1612 15/1619 15/16

18 1/1625 5/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

14

10 3/410 3/413 1/4

10 @ 417#4 @ 500#4 @ 470#

28’ GLCSL250-23 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 21’-0” 13 1/4 14 15/16 27 5/16 10 1/2 1 3/4 11 9 10 3/4 4 @ 613#

33’GLC250-23 (S or AL)-33

GLCS250-23 (S or AL)-33AL250-23-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

21’-0”21’-0”20’-0”

13 1/413 1/430 5/8

5 11/1612 15/1619 15/16

18 1/1625 5/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

99

20

10 3/410 3/413 1/4

14 @ 417#6 @ 500#6 @ 470#

43’GLC250-23 (S or AL)-43

GLCS250-23 (S or AL)-43AL250-23-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

21’-0”21’-0”20’-0”

13 1/413 1/430 5/8

5 11/1612 15/1619 15/16

18 1/1625 5/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

131327

10 3/410 3/413 1/4

18 @ 417#6 @ 500#6 @ 470#

53’

GLC250-23 (S or AL)-53GLCS250-23 (S or AL)-53

AL250-23-53GLCSL250-23 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

21’-0”21’-0”20’-0”21’-0”

13 1/413 1/430 5/813 1/4

5 11/1612 15/1619 15/1614 15/16

18 1/1625 5/16

-27 5/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

13133013

10 3/410 3/413 1/410 3/4

22 @ 417#8 @ 500#8 @ 470#6 @ 613#

63’GLC250-23 (S or AL)-63

GLCS250-23 (S or AL)-63AL250-23-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

21’-0”21’-0”20’-0”

13 1/413 1/430 5/8

5 11/1612 15/1619 15/16

18 1/1625 5/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

191937

10 3/410 3/413 1/4

26 @ 417#8 @ 500#8 @ 470#

78’ GLCSL250-23 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 21’-0” 28 1/2 14 15/16 27 5/16 10 1/2 1 3/4 11 54 10 3/4 8 @ 613#

83’GLC250-23 (S or AL)-83

GLCS250-23 (S or AL)-83AL250-23-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

21’-0”21’-0”20’-0”

28 1/228 1/230 5/8

5 11/1612 15/1619 15/16

18 1/1625 5/16

-

10 1/210 1/2

10 11/16

1 3/41 3/4

8

-9-

545447

10 3/410 3/413 1/4

34 @ 417#10 @ 500#10 @ 470#

103’

GLC250-23 (S or AL)-103GLCS250-23 (S or AL)-103

AL250-23-103GLCSL250-23 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

21’-0”21’-0”20’-0”21’-0”

28 1/228 1/230 5/828 1/2

5 11/1612 15/1619 15/1614 15/16

18 1/1625 5/16

-27 5/16

10 1/210 1/2

10 11/1610 1/2

1 3/41 3/4

81 3/4

-9-

11

54545354

10 3/410 3/413 1/410 3/4

42 @ 417#12 @ 500#12 @ 470#10 @ 613#

28’

23’GLC250-28 (S or AL)-23

GLCS250-28 (S or AL)-23AL250-28-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

25’-0”25’-0”25’-0”

15 3/415 3/437 3/8

8 1/1615 5/1624 3/8

18 1/1625 5/16

-

12 1/212 1/2

12 11/16

1 3/41 3/4

10

-9-

99

14

21 3/421 3/423 3/8

10 @ 471#4 @ 554#4 @ 489#

28’ GLCSL250-28 (S or AL)-28 Steel 25’ 1 1/2 5 1/16 25’-0” 15 3/4 17 5/16 27 5/16 12 1/2 1 3/4 11 9 21 3/4 4 @ 667#

33’GLC250-28 (S or AL)-33

GLCS250-28 (S or AL)-33AL250-28-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

25’-0”25’-0”25’-0”

15 3/415 3/437 3/8

8 1/1615 5/1624 3/8

18 1/1625 5/16

-

12 1/212 1/2

12 11/16

1 3/41 3/4

10

-9-

99

20

21 3/421 3/423 3/8

14 @ 471#6 @ 554#6 @ 489#

43’GLC250-28 (S or AL)-43

GLCS250-28 (S or AL)-43AL250-28-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

25’-0”25’-0”25’-0”

15 3/415 3/437 3/8

8 1/1615 5/1624 3/8

18 1/1625 5/16

-

12 1/212 1/2

12 11/16

1 3/41 3/4

10

-9-

131327

21 3/421 3/423 3/8

18 @ 471#6 @ 554#6 @ 489#

53’

GLC250-28 (S or AL)-53GLCS250-28 (S or AL)-53

AL250-28-53GLCSL250-28 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

25’-0”25’-0”25’-0”25’-0”

15 3/415 3/437 3/815 3/4

8 1/1615 5/1624 3/8

17 5/16

18 1/1625 5/16

-27 5/16

12 1/212 1/2

12 11/1612 1/2

1 3/41 3/4

101 3/4

-9-

11

13133013

21 3/421 3/423 3/821 3/4

22 @ 471#8 @ 554#8 @ 489#6 @ 667#

63’GLC250-28 (S or AL)-63

GLCS250-28 (S or AL)-63AL250-28-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

25’-0”25’-0”25’-0”

15 3/415 3/437 3/8

8 1/1615 5/1624 3/8

18 1/1625 5/16

-

12 1/212 1/2

12 11/16

1 3/41 3/4

10

-9-

191937

21 3/421 3/423 3/8

26 @ 471#8 @ 554#8 @ 489#

78’ GLCSL250-28 (S or AL)-78 Steel 25’ 1 1/2 5 1/16 25’-0” 35 3/16 17 5/16 27 5/16 12 1/2 1 3/4 11 54 21 3/4 8 @ 667#

83’GLC250-28 (S or AL)-83

GLCS250-28 (S or AL)-83AL250-28-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

5 1/165 1/167 3/16

25’-0”25’-0”25’-0”

35 3/1635 3/1637 3/8

8 1/1615 5/1624 3/8

18 1/1625 5/16

-

12 1/212 1/2

12 11/16

1 3/41 3/4

10

-9-

545447

21 3/421 3/423 3/8

34 @ 471#10 @ 554#10 @ 489#

103’

GLC250-28 (S or AL)-103GLCS250-28 (S or AL)-103

AL250-28-103GLCSL250-28 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

5 1/165 1/167 3/165 1/16

25’-0”25’-0”25’-0”25’-0”

35 3/1635 3/1637 3/8

35 3/16

8 1/1615 5/1624 3/8

17 5/16

18 1/1625 5/16

-27 5/16

12 1/212 1/2

12 11/1612 1/2

1 3/41 3/4

101 3/4

-9-

11

54545354

21 3/421 3/423 3/821 3/4

42 @ 471#12 @ 554#12 @ 489#10 @ 667#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

40

250# CAPACITYC

EILING

MO

UN

TED W

OR

KSTATIO

N B

RID

GE C

RA

NES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

8’

11’-6”GLC500-8 (S or AL)-11.5

GLCS500-8 (S or AL)-11.5AL500-8-11.5

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

999

13 3/1613 3/1613 1/4

6 @ 743#4 @ 867#4 @ 810#

23’GLC500-8 (S or AL)-23

GLCS500-8 (S or AL)-23AL500-8-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

99

14

13 3/1613 3/1613 1/4

10 @ 743#4 @ 867#4 @ 810#

28’ GLCSL500-8 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 6’-6” 8 11/16 18 7/8 26 3/8 6 11/16 2 3/8 12 3/8 9 13 3/16 4 @ 986#

33’GLC500-8 (S or AL)-33

GLCS500-8 (S or AL)-33AL500-8-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

99

20

13 3/1613 3/1613 1/4

14 @ 743#6 @ 867#6 @ 810#

34’ GLCSLX500-8 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 6’-6” 8 11/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 9 13 3/16 4 @ 1,049#

43’GLC500-8 (S or AL)-43

GLCS500-8 (S or AL)-43AL500-8-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

131327

13 3/1613 3/1613 1/4

18 @ 743#6 @ 867#6 @ 810#

53’

GLC500-8 (S or AL)-53GLCS500-8 (S or AL)-53

AL500-8-53GLCSL500-8 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

6’-6”6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 11/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

6 11/166 11/16

12 11/166 11/16

2 3/82 3/8

102 3/8

-10-

12 3/8

13133013

13 3/1613 3/1613 1/4

13 3/16

22 @ 743#8 @ 867#8 @ 810#6 @ 986#

63’GLC500-8 (S or AL)-63

GLCS500-8 (S or AL)-63AL500-8-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

8 11/168 11/1613 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

191937

13 3/1613 3/1613 1/4

26 @ 743#8 @ 867#8 @ 810#

64’ GLCSLX500-8 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 6’-6” 13 13/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 46 13 3/16 6 @ 1,049#78’ GLCSL500-8 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 6’-6” 13 13/16 18 7/8 26 3/8 6 11/16 2 3/8 12 3/8 54 13 3/16 8 @ 986#

83’GLC500-8 (S or AL)-83

GLCS500-8 (S or AL)-83AL500-8-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

6’-6”6’-6”6’-6”

13 13/1613 13/16

13 7/8

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

545447

13 3/1613 3/1613 1/4

34 @ 743#10 @ 867#10 @ 810#

94’ GLCSLX-8 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 6’-6” 13 13/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 54 13 3/16 8 @ 1,049#

103’

GLC500-8 (S or AL)-103GLCS500-8 (S or AL)-103

AL500-8-103GLCSL500-8 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

6’-6”6’-6”6’-6”6’-6”

13 13/1613 13/16

13 7/813 13/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

6 11/166 11/16

12 11/166 11/16

2 3/82 3/8

102 3/8

-10-

12 3/8

54545354

13 3/1613 3/1613 1/4

13 3/16

42 @ 743#12 @ 867#12 @ 810#10 @ 986#

124’ GLCSLX500-8 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 6’-6” 13 13/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 54 13 3/16 10 @ 1,049#

10’

11’-6”GLC500-10 ( S or AL)-11.5

GLCS500-10 (S or AL)-11.5AL500-10-11.5

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

999

13 3/1613 3/1613 1/4

6 @ 747#4 @ 871#4 @ 813#

23’GLC500-10 (S or AL)-23

GLCS500-10 (S or AL)-23AL500-10-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

99

14

13 3/1613 3/1613 1/4

10 @ 747#4 @ 871#4 @ 813#

28’ GLCSL500-10 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 8’-0” 9 15/16 18 7/8 26 3/8 6 11/16 2 3/8 12 3/8 9 13 3/16 4 @ 990#

33’GLC500-10 (S or AL)-33

GLCS500-10 (S or AL)-33AL500-10-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

99

20

13 3/1613 3/1613 1/4

14 @ 747#6 @ 871#6 @ 813#

34’ GLCSLX500-10 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 8’-0” 9 15/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 9 13 3/16 4 @ 1,053#

43’GLC500-10 (S or AL)-43

GLCS500-10 (S or AL)-43AL500-10-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

131327

13 3/1613 3/1613 1/4

18 @ 747#6 @ 871#6 @ 813#

53’

GLC500-10 (S or AL)-53GLCS500-10 (S or AL)-53

AL500-10-53GLCSL500-10 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

8’-0”8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

9 15/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

6 11/166 11/16

12 11/166 11/16

2 3/82 3/8

102 3/8

-10-

12 3/8

13133013

13 3/1613 3/1613 1/4

13 3/16

22 @ 747#8 @ 871#8 @ 813#6 @ 990#

63’GLC500-10 (S or AL)-63

GLCS500-10 (S or AL)-63AL500-10-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

9 15/169 15/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

191937

13 3/1613 3/1613 1/4

26 @ 747#8 @ 871#8 @ 813#

64’ GLCSLX500-10 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 8’-0” 17 3/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 46 13 3/16 6 @ 1,053#78’ GLCSL500-10 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 8’-0” 17 3/16 18 7/8 26 3/8 6 11/16 2 3/8 12 3/8 54 13 3/16 8 @ 990#

83’GLC500-10 (S or AL)-83

GLCS500-10 (S or AL)-83AL500-10-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

8’-0”8’-0”8’-0”

17 3/1617 3/1617 1/4

8 7/816 1/223 7/8

16 3/824-

6 11/166 11/16

12 11/16

2 3/82 3/8

10

-10-

545447

13 3/1613 3/1613 1/4

34 @ 747#10 @ 871#10 @ 813#

94’ GLCSLX500-10 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 8’-0” 17 3/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 54 13 3/16 8 @ 1,053#

103’

GLC500-10 (S or AL)-103GLCS500-10 (S or AL)-103

AL500-10-103GLCSL500-10 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

8’-0”8’-0”8’-0”8’-0”

17 3/1617 3/1617 1/4

17 3/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

6 11/166 11/16

12 11/166 11/16

2 3/82 3/8

102 3/8

-10-

12 3/8

54545354

13 3/1613 3/1613 1/4

13 3/16

42 @ 747#12 @ 871#12 @ 813#10 @ 990#

124’ GLCSLX500-10 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 8’-0” 17 3/16 20 7/8 28 3/8 6 11/16 2 3/8 14 3/8 54 13 3/16 10 @ 1,053#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

500# CAPACITY

41

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

42

500# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

15’

23’GLC500-15 (S or AL)-23

GLCS500-15 (S or AL)-23AL500-15-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

13’-0”13’-0”13’-0”

12 7/1612 7/16

23 15/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

14

13 3/1613 3/1613 1/4

10 @ 774#4 @ 898#4 @ 825#

28’ GLCSL500-15 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 13’-0” 12 7/16 18 7/8 26 3/8 12 13/16 2 3/8 12 3/8 9 13 3/16 4 @ 1,017#

33’GLC500-15 (S or AL)-33

GLCS500-15 (S or AL)-33AL500-15-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

13’-0”13’-0”13’-0”

12 7/1612 7/16

23 15/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

20

13 3/1613 3/1613 1/4

14 @ 774#6 @ 898#6 @ 825#

34’ GLCSLX500-15 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 13’-0” 12 7/16 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 9 13 3/16 4 @ 1,079#

43’GLC500-15 (S or AL)-43

GLCS500-15 (S or AL)-43AL500-15-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

13’-0”13’-0”13’-0”

12 7/1612 7/16

23 15/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

131327

13 3/1613 3/1613 1/4

18 @ 774#6 @ 898#6 @ 825#

53’

GLC500-15 (S or AL)-53GLCS500-15 (S or AL)-53

AL500-15-53GLCSL500-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

13’-0”13’-0”13’-0”13’-0”

12 7/1612 7/16

23 15/1612 7/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

13133013

13 3/1613 3/1613 1/4

13 3/16

22 @ 774#8 @ 898#8 @ 825#

6 @ 1,017#

63’GLC500-15 (S or AL)-63

GLCS500-15 (S or AL)-63AL500-15-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

13’-0”13’-0”13’-0”

12 7/1612 7/16

23 15/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

191937

13 3/1613 3/1613 1/4

26 @ 774#8 @ 898#8 @ 825#

64’ GLCSLX500-15 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 13’-0” 23 7/8 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 46 13 3/16 6 @ 1,079#78’ GLCSL500-15 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 13’-0” 23 7/8 18 7/8 26 3/8 12 13/16 2 3/8 12 3/8 54 13 3/16 8 @ 1,017#

83’GLC500-15 (S or AL)-83

GLCS500-15 (S or AL)-83AL500-15-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

13’-0”13’-0”13’-0”

23 7/823 7/8

23 15/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

545447

13 3/1613 3/1613 1/4

34 @ 774#10 @ 898#10 @ 825#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 13’-0” 23/7/8 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 54 13 3/16 8 @ 1,079#

103’

GLC500-15 (S or AL)-103GLCS500-15 (S or AL)-103

AL500-15-103GLCSL500-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

13’-0”13’-0”13’-0”13’-0”

23 7/823 7/8

23 15/1623 7/8

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

54545354

13 3/1613 3/1613 1/4

13 3/16

42 @ 774#12 @ 898#12 @ 825#

10 @ 1,017#124’ GLCSLX500-15 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 13’-0” 23 7/8 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 54 13 3/16 10 @ 1,079#

20’

23’GLC500-20 (S or AL)-23

GLCS500-20 (S or AL)-23AL500-20-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

18’-0”18’-0”18’-0”

13 11/1613 11/1627 5/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

14

13 3/1613 3/1613 1/4

10 @ 792#4 @ 916#4 @ 837#

28’ GLCSL500-20 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 18’-0” 13 11/16 18 7/8 26 3/8 12 13/16 2 3/8 12 3/8 9 13 3/16 4 @ 1,035#

33’GLC500-20 (S or AL)-33

GLCS500-20 (S or AL)-33AL500-20-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

18’-0”18’-0”18’-0”

13 11/1613 11/1627 5/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

20

13 3/1613 3/1613 1/4

14 @ 792#6 @ 916#6 @ 837#

34’ GLCSLX500-20 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 18’-0” 13 11/16 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 9 13 3/16 4 @ 1,098#

43’GLC500-20 (S or AL)-43

GLCS500-20 (S or AL)-43AL500-20-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

18’-0”18’-0”18’-0”

13 11/1613 11/1627 5/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

131327

13 3/1613 3/1613 1/4

18 @ 792#6 @ 916#6 @ 837#

53’

GLC500-20 (S or AL)-53GLCS500-20 (S or AL)-53

AL500-20-53GLCSL500-20 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

18’-0”18’-0”18’-0”18’-0”

13 11/1613 11/1627 5/16

13 11/16

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

13133013

13 3/1613 3/1613 1/4

13 3/16

22 @ 792#8 @ 916#8 @ 837#

6 @ 1,035#

63’GLC500-20 (S or AL)-63

GLCS500-20 (S or AL)-63AL500-20-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

18’-0”18’-0”18’-0”

13 11/1613 11/1627 5/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

191937

13 3/1613 3/1613 1/4

26 @ 792#8 @ 916#8 @ 837#

64’ GLCSLX500-20 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 18’-0” 27 1/4 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 46 13 3/16 6 @ 1,098#78’ GLCSL500-20 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 18’-0” 27 1/4 18 7/8 26 3/8 12 13/16 2 3/8 12 3/8 54 13 3/16 8 @ 1,035#

83’GLC500-20 (S or AL)-83

GLCS500-20 (S or AL)-83AL500-20-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

18’-0”18’-0”18’-0”

27 1/427 1/4

27 5/16

8 7/816 1/223 7/8

16 3/824-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

545447

13 3/1613 3/1613 1/4

34 @ 792#10 @ 916#10 @ 837#

94’ GLCSLX500-20 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 18’-0” 27 1/4 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 54 13 3/16 8 @ 1,098#

103’

GLC500-20 (S or AL)-103GLCS500-20 (S or AL)-103

AL500-20-103GLCSL500-20 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

18’-0”18’-0”18’-0”18’-0”

27 1/427 1/4

27 5/1627 1/4

8 7/816 1/223 7/818 7/8

16 3/824-

26 3/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

54545354

13 3/1613 3/1613 1/4

13 3/16

42 @ 792#12 @ 916#12 @ 837#

10 @ 1,035#124’ GLCSLX500-20 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 18’-0” 27 1/4 20 7/8 28 3/8 12 13/16 2 3/8 14 3/8 54 13 3/16 10 @ 1,098#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

43

500# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

23’

23’GLC500-23 (S or AL)-23

GLCS500-23 (S or AL)-23AL500-23-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

21’-0”21’-0”21’-0”

14 15/1614 15/16

30 5/8

8 7/816 1/223 7/8

15 1/822 3/4

-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

14

13 3/1613 3/1613 1/4

10 @ 803#4 @ 927#4 @ 841#

28’ GLCSL500-23 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 21’-0” 14 15/16 18 7/8 25 1/8 12 13/16 2 3/8 12 3/8 9 13 3/16 4 @ 1,046#

33’GLC500-23 (S or AL)-33

GLCS500-23 (S or AL)-33AL500-23-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

21’-0”21’-0”21’-0”

14 15/1614 15/16

30 5/8

8 7/816 1/223 7/8

15 1/822 3/4

-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

99

20

13 3/1613 3/1613 1/4

14 @ 803#6 @ 927#6 @ 841#

34’ GLCSLX500-23 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 21’-0” 14 15/16 20 7/8 27 1/8 12 13/16 2 3/8 14 3/8 9 13 3/16 4 @ 1,109#

43’GLC500-23 (S or AL)-43

GLCS500-23 (S or AL)-43AL500-23-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

21’-0”21’-0”21’-0”

14 15/1614 15/16

30 5/8

8 7/816 1/223 7/8

15 1/822 3/4

-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

131327

13 3/1613 3/1613 1/4

18 @ 803#6 @ 927#6 @ 841#

53’

GLC500-23 (S or AL)-53GLCS500-23 (S or AL)-53

AL500-23-53GLCSL500-23 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

21’-0”21’-0”21’-0”21’-0”

14 15/1614 15/16

30 5/814 15/16

8 7/816 1/223 7/818 7/8

15 1/822 3/4

-25 1/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

13133013

13 3/1613 3/1613 1/4

13 3/16

22 @ 803#8 @ 927#8 @ 841#

6 @ 1,046#

63’GLC500-23 (S or AL)-63

GLCS500-23 (S or AL)-63AL500-23-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

21’-0”21’-0”21’-0”

14 15/1614 15/16

30 5/8

8 7/816 1/223 7/8

15 1/822 3/4

-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

191937

13 3/1613 3/1613 1/4

26 @ 803#8 @ 927#8 @ 841#

64’ GLCSLX500-23 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 21’-0” 30 9/16 20 7/8 27 1/8 12 13/16 2 3/8 14 3/8 46 13 3/16 6 @ 1,109#78’ GLCSL500-23 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 21’-0” 30 9/16 18 7/8 25 1/8 12 13/16 2 3/8 12 3/8 54 13 3/16 8 @ 1,046#

83’GLC500-23 (S or AL)-83

GLCS500-23 (S or AL)-83AL500-23-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

7 1/87 1/8

7 3/16

21’-0”21’-0”21’-0”

30 9/1630 9/1630 5/8

8 7/816 1/223 7/8

15 1/822 3/4

-

12 13/1612 13/1612 11/16

2 3/82 3/8

10

-10-

545447

13 3/1613 3/1613 1/4

34 @ 803#10 @ 927#10 @ 841#

94’ GLCSLX-23 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 21’-0” 30 9/16 20 7/8 27 1/8 12 13/16 2 3/8 14 3/8 54 13 3/16 8 @ 1,109#

103’

GLC500-23 (S or AL)-103GLCS500-23 (S or AL)-103

AL500-23-103GLCSL500-23 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

7 1/87 1/8

7 3/167 1/8

21’-0”21’-0”21’-0”21’-0”

30 9/1630 9/1630 5/8

30 9/16

8 7/816 1/223 7/818 7/8

15 1/822 3/4

-25 1/8

12 13/1612 13/1612 11/1612 13/16

2 3/82 3/8

102 3/8

-10-

12 3/8

54545354

13 3/1613 3/1613 1/4

13 3/16

42 @ 803#12 @ 927#12 @ 841#

10 @ 1,046#124’ GLCSLX500-23 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 21’-0” 30 9/16 20 7/8 27 1/8 12 13/16 2 3/8 14 3/8 54 13 3/16 10 @ 1,109#

28’

23’GLC500-28 (S or AL)-23

GLCS500-28 (S or AL)-23AL500-28-23

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

25’-0”25’-0”25’-0”

17 7/1617 7/16

38

10 11/1618 5/16

22 11/16

1522 5/8

-

15 3/1615 3/1613 1/8

2 3/82 3/8

10 1/2

-10-

99

14

23 5/1623 5/1623 3/8

10 @ 859#4 @ 983#4 @ 904#

28’ GLCSL500-28 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 25’-0” 17 7/16 20 11/16 25 15 3/16 2 3/8 12 3/8 9 23 5/16 4 @ 1,102#

33’GLC500-28 (S or AL)-33

GLCS500-28 (S or AL)-33AL500-28-33

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

25’-0”25’-0”25’-0”

17 7/1617 7/16

38

10 11/1618 5/16

22 11/16

1522 5/8

-

15 3/1615 3/1613 1/8

2 3/82 3/8

10 1/2

-10-

99

20

23 5/1623 5/1623 3/8

14 @ 859#6 @ 983#6 @ 904#

34’ GLCSLX500-28 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 25’-0” 17 7/16 22 11/16 27 15 3/16 2 3/8 14 3/8 9 23 5/16 4 @ 1,165#

43’GLC500-28 (S or AL)-43

GLCS500-28 (S or AL)-43AL500-28-43

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

25’-0”25’-0”25’-0”

17 7/1617 7/16

38

10 11/1618 5/16

22 11/16

1522 5/8

-

15 3/1615 3/1613 1/8

2 3/82 3/8

10 1/2

-10-

131327

23 5/1623 5/1623 3/8

18 @ 859#6 @ 983#6 @ 904#

53’

GLC500-28 (S or AL)-53GLCS500-28 (S or AL)-53

AL500-28-53GLCSL500-28 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/16

2 5/82 13/16

7 1/87 1/8

7 13/167 1/8

25’-0”25’-0”25’-0”25’-0”

17 7/1617 7/16

3817 7/16

10 11/1618 5/16

22 11/1620 11/16

1522 5/8

-25

15 3/1615 3/1613 1/8

15 3/16

2 3/82 3/8

10 1/22 3/8

-10-

12 3/8

13133013

23 5/1623 5/1623 3/8

23 5/16

22 @ 859#8 @ 983#8 @ 904#

6 @ 1,102#

63’GLC500-28 (S or AL)-63

GLCS500-28 (S or AL)-63AL500-28-63

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

25’-0”25’-0”25’-0”

17 7/1617 7/16

38

10 11/1618 5/16

22 11/16

1522 5/8

-

15 3/1615 3/1613 1/8

2 3/82 3/8

10 1/2

-10-

191937

23 5/1623 5/1623 3/8

26 @ 859#8 @ 983#8 @ 904#

64’ GLCSLX500-28 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 25’-0” 37 5/16 22 11/16 27 15 3/16 2 3/8 14 3/8 46 23 5/16 6 @ 1,165#78’ GLCSL500-28 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 25’-0” 37 5/16 20 11/16 25 15 3/16 2 3/8 12 3/8 54 23 5/16 8 @ 1,102#

83’GLC500-28 (S or AL)-83

GLCS500-28 (S or AL)-83AL500-28-83

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

25’-0”25’-0”25’-0”

37 5/1637 5/16

38

10 11/1618 5/16

22 11/16

1522 5/8

-

15 3/1615 3/1613 1/8

2 3/82 3/8

10 1/2

-10-

545447

23 5/1623 5/1623 3/8

34 @ 859#10 @ 983#10 @ 904#

94’ GLCSLX500-28 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 25’-0” 37 5/16 22 11/16 27 15 3/16 2 3/8 14 3/8 54 23 5/16 8 @ 1,165#

103’

GLC500-28 (S or AL)-103GLCS500-28 (S or AL)-103

AL500-28-103GLCSL500-28 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/16

2 5/82 13/16

7 1/87 1/8

7 13/167 1/8

25’-0”25’-0”25’-0”25’-0”

37 5/1637 5/16

3837 5/16

10 11/1618 5/16

22 11/1620 11/16

1522 5/8

-25

15 3/1615 3/1613 1/8

15 3/16

2 3/82 3/8

10 1/22 3/8

-10-

12 3/8

54545354

23 5/1623 5/1623 3/8

23 5/16

42 @ 859#12 @ 983#12 @ 904#

10 @ 1,102#124’ GLCSLX500-28 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 25’-0” 37 5/16 22 11/16 27 15 3/16 2 3/8 14 3/8 54 23 5/16 10 @ 1,165#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

44

500# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

34’

28’ GLCSL500-15 (S or AL)-28 Steel 25’ 2 13/16 7 1/8 30’-0” 19 15/16 20 11/16 25 17 3/16 2 3/8 12 3/8 9 23 5/16 4 @ 1,133#

33’GLC500-15 (S or AL)-33

GLCS500-15 (S or AL)-33AL500-15-33

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

30’-0”30’-0”30’-0”

19 15/1619 15/1644 11/16

10 11/1618 5/16

22 11/16

1522 5/8

-

17 3/1617 3/1615 1/4

2 3/82 3/8

12 5/8

-10-

99

20

23 5/1623 5/1623 3/8

14 @ 891#6 @ 1,014#

6 @ 935#34’ GLCSLX500-15 (S or AL)-34 Steel 30’ 2 13/16 7 1/8 30’-0” 19 15/16 22 11/16 27 17 3/16 2 3/8 14 3/8 9 23 5/16 4 @ 1,196#

43’GLC500-15 (S or AL)-43

GLCS500-15 (S or AL)-43AL500-15-43

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

30’-0”30’-0”30’-0”

19 15/1619 15/1644 11/16

10 11/1618 5/16

22 11/16

1522 5/8

-

17 3/1617 3/1615 1/4

2 3/82 3/8

12 5/8

-10-

131327

23 5/1623 5/1623 3/8

18 @ 891#6 @ 1,014#

6 @ 935#

53’

GLC500-15 (S or AL)-53GLCS500-15 (S or AL)-53

AL500-15-53GLCSL500-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/16

2 5/82 13/16

7 1/87 1/8

7 13/167 1/8

30’-0”30’-0”30’-0”30’-0”

19 15/1619 15/1644 11/1619 15/16

10 11/1618 5/16

22 11/1620 11/16

1522 5/8

-25

17 3/1617 3/1615 1/4

17 3/16

2 3/82 3/8

12 5/82 3/8

-10-

12 3/8

13133013

23 5/1623 5/1623 3/8

23 5/16

22 @ 891#8 @ 1,014#

8 @ 935#6 @ 1,133#

63’GLC500-15 (S or AL)-63

GLCS500-15 (S or AL)-63AL500-15-63

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

30’-0”30’-0”30’-0”

19 15/1619 15/1644 11/16

10 11/1618 5/16

22 11/16

1522 5/8

-

17 3/1617 3/1615 1/4

2 3/82 3/8

12 5/8

-10-

191937

23 5/1623 5/1623 3/8

26 @ 891#8 @ 1,014#

8 @ 935#64’ GLCSLX500-15 (S or AL)-64 Steel 30’ 2 13/16 7 1/8 30’-0” 44 22 11/16 27 17 3/16 2 3/8 14 3/8 46 23 5/16 6 @ 1,196#78’ GLCSL500-15 (S or AL)-78 Steel 25’ 2 13/16 7 1/8 30’-0” 44 20 11/16 25 17 3/16 2 3/8 12 3/8 54 23 5/16 8 @ 1,133#

83’GLC500-15 (S or AL)-83

GLCS500-15 (S or AL)-83AL500-15-83

SteelSteelAlum

6’20’20’

2 13/162 13/16

2 5/8

7 1/87 1/8

7 13/16

30’-0”30’-0”30’-0”

4444

44 11/16

10 11/1618 5/16

22 11/16

1522 5/8

-

17 3/1617 3/1615 1/4

2 3/82 3/8

12 5/8

-10-

545447

23 5/1623 5/1623 3/8

34 @ 891#10 @ 1,014#

10 @ 935#94’ GLCSLX-15 (S or AL)-94 Steel 30’ 2 13/16 7 1/8 30’-0” 44 22 11/16 27 17 3/16 2 3/8 14 3/8 54 23 5/16 8 @ 1,196#

103’

GLC500-15 (S or AL)-103GLCS500-15 (S or AL)-103

AL500-15-103GLCSL500-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/16

2 5/82 13/16

7 1/87 1/8

7 13/167 1/8

30’-0”30’-0”30’-0”30’-0”

4444

44 11/1644

10 11/1618 5/16

22 11/1620 11/16

1522 5/8

-25

17 3/1617 3/1615 1/4

17 3/16

2 3/82 3/8

12 5/82 3/8

-10-

12 3/8

54545354

23 5/1623 5/1623 3/8

23 5/16

42 @ 891#12 @ 1,041#

12 @ 935#10 @ 1,133#

124’ GLCSLX500-15 (S or AL)-124 Steel 30’ 2 13/16 7 1/8 30’-0” 44 22 11/16 27 17 3/16 2 3/8 14 3/8 54 23 5/16 10 @ 1,196#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

8’

11’-6”GLC1000-8 (S or AL)-11.5

GLCS1000-8 (S or AL)-11.5AL1000-8-11.5

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

99

13

1515

14 15/16

6 @ 1,462#4 @ 1,670#4 @ 1,585#

23’GLC1000-8 (S or AL)-23

GLCS1000-8 (S or AL)-23AL1000-8-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

99

26

1515

14 15/16

10 @ 1,462#4 @ 1,670#4 @ 1585#

28’ GLCSL1000-8 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 6’-6” 10 13/16 21 1/16 25 7 5/8 3 1/16 13 15/16 13 15 4 @ 1,777#

33’GLC1000-8 (S or AL)-33

GLCS1000-8 (S or AL)-33AL1000-8-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

131339

1515

14 15/16

14 @ 1,462#6 @ 1,670#6 @ 1,585#

34’ GLCSLX1000-8 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 6’-6” 10 13/16 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 13 15 4 @ 1,949

43’GLC1000-8 (S or AL)-43

GLCS1000-8 (S or AL)-43AL1000-8-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

191949

1515

14 15/16

18 @ 1,462#6 @ 1,670#6 @ 1,585#

53’

GLC1000-8 (S or AL)-53GLCS1000-8 (S or AL)-53

AL1000-8-53GLCSL1000-8 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

6’-6”6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/210 13/16

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

7 5/87 5/87 3/47 5/8

3 1/163 1/165 1/8

3 1/16

-11 1/16

-13 15/16

19195319

1515

14 15/1615

22 @ 1,462#8 @ 1,670#8 @ 1,585#6 @ 1,777#

63’GLC1000-8 (S or AL)-63

GLCS1000-8 (S or AL)-63AL1000-8-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

10 13/1610 13/16

13 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

262653

1515

14 15/16

26 @ 1,462#8 @ 1,670#8 @ 1,585#

64’ GLCSLX1000-8 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 6’-6” 13 1/2 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 6 @ 1,949#78’ GLCSL1000-8 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 6’-6” 13 1/2 21 1/16 25 7 5/8 3 1/16 13 15/16 54 15 8 @ 1,777#

83’GLC1000-8 (S or AL)-83

GLCS1000-8 (S or AL)-83AL1000-8-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

6’-6”6’-6”6’-6”

13 1/213 1/213 1/2

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/87 3/4

3 1/163 1/165 1/8

-11 1/16

-

545453

1515

14 15/16

34 @ 1,462#10 @ 1,670#10 @ 1,585#

94’ GLCSLX-8 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 6’-6” 13 1/2 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 8 @ 1,949#

103’

GLC1000-8 (S or AL)-103GLCS1000-8 (S or AL)-103

AL1000-8-103GLCSL1000-8 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

6’-6”6’-6”6’-6”6’-6”

13 1/213 1/213 1/213 1/2

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

7 5/87 5/87 3/47 5/8

3 1/163 1/165 1/8

3 1/16

-11 1/16

-13 15/16

54545354

1515

14 15/1615

42 @ 1,462#12 @ 1,670#12 @ 1,585#10 @ 1,777#

124’ GLCSLX1000-8 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 6’-6” 13 1/2 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 10 @ 1,949#

10’

11’-6”GLC1000-10 ( S or AL)-11.5

GLCS1000-10 (S or AL)-11.5AL1000-10-11.5

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

99

13

1515

14 15/16

6 @ 1,468#4 @ 1,676#4 @ 1,604#

23’GLC1000-10 (S or AL)-23

GLCS1000-10 (S or AL)-23AL1000-10-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

99

26

1515

14 15/16

10 @ 1,468#4 @ 1,676#4 @ 1,604#

28’ GLCSL1000-10 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 8’-0” 12 13/16 21 1/16 25 7 5/8 3 1/16 13 15/16 13 15 4 @ 1,783#

33’GLC1000-10 (S or AL)-33

GLCS1000-10 (S or AL)-33AL1000-10-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

131339

1515

14 15/16

14 @ 1,468#6 @ 1,676#6 @ 1,604#

34’ GLCSLX1000-10 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 8’-0” 12 13/16 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 13 15 4 @ 1,955#

43’GLC1000-10 (S or AL)-43

GLCS1000-10 (S or AL)-43AL1000-10-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

191949

1515

14 15/16

18 @ 1,468#6 @ 1,676#6 @ 1,604#

53’

GLC1000-10 (S or AL)-53GLCS1000-10 (S or AL)-53

AL1000-10-53GLCSL1000-10 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

8’-0”8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/812 13/16

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

7 5/87 5/8

13 1/87 5/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

19195319

1515

14 15/1615

22 @ 1,468#8 @ 1,676#8 @ 1,604#6 @ 1,783#

63’GLC1000-10 (S or AL)-63

GLCS1000-10 (S or AL)-63AL1000-10-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

12 13/1612 13/16

16 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

262653

1515

14 15/16

26 @ 1,468#8 @ 1,676#8 @ 1,604#

64’ GLCSLX1000-10 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 8’-0” 16 7/8 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 6 @ 1,955#78’ GLCSL1000-10 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 8’-0” 16 7/8 21 1/16 25 7 5/8 3 1/16 13 15/16 54 15 8 @ 1,783#

83’GLC1000-10 (S or AL)-83

GLCS1000-10 (S or AL)-83AL1000-10-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

8’-0”8’-0”8’-0”

16 7/816 7/816 7/8

10 3/1618 3/1622 1/16

14 1/822 1/8

-

7 5/87 5/8

13 1/8

3 1/163 1/1610 1/2

-11 1/16

-

545453

1515

14 15/16

34 @ 1,468#10 @ 1,676#10 @ 1,604#

94’ GLCSLX1000-10 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 8’-0” 16 7/8 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 8 @ 1,955#

103’

GLC1000-10 (S or AL)-103GLCS1000-10 (S or AL)-103

AL1000-10-103GLCSL1000-10 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

8’-0”8’-0”8’-0”8’-0”

16 7/816 7/816 7/816 7/8

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

7 5/87 5/8

13 1/87 5/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

54545354

1515

14 15/1615

42 @ 1,468#12 @ 1,676#12 @ 1,604#10 @ 1,783#

124’ GLCSLX1000-10 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 8’-0” 16 7/8 24 3/16 28 1/8 7 5/8 3 1/16 17 1/16 54 15 10 @ 1,955#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

1000# CAPACITY

45

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

46

1000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

15’

23’GLC1000-15 (S or AL)-23

GLCS1000-15 (S or AL)-23AL1000-15-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

13’-0”13’-0”13’-0”

16 13/1616 13/1623 9/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

99

26

1515

14 15/16

10 @ 1,517#4 @ 1,725#4 @ 1,626#

28’ GLCSL1000-15 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 13’-0” 16 13/16 21 1/16 25 14 1/8 3 1/16 13 15/16 13 15 4 @ 1,832#

33’GLC1000-15 (S or AL)-33

GLCS1000-15 (S or AL)-33AL1000-15-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

13’-0”13’-0”13’-0”

16 13/1616 13/1623 9/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

131339

1515

14 15/16

14 @ 1,517#6 @ 1,725#6 @ 1,626#

34’ GLCSLX1000-15 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 13’-0” 16 13/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 13 15 4 @ 2,004#

43’GLC1000-15 (S or AL)-43

GLCS1000-15 (S or AL)-43AL1000-15-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

13’-0”13’-0”13’-0”

16 13/1616 13/1623 9/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

191949

1515

14 15/16

18 @ 1,517#6 @ 1,725#6 @ 1,626#

53’

GLC1000-15 (S or AL)-53GLCS1000-15 (S or AL)-53

AL1000-15-53GLCSL1000-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

13’-0”13’-0”13’-0”13’-0”

16 13/1616 13/1623 9/16

16 13/16

10 3/1618 3/1622 1/1622 1/16

14 1/822 1/8

-25

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

19195319

1515

14 15/1615

22 @ 1,517#8 @ 1,725#8 @ 1,626#6 @ 1,832#

63’GLC1000-15 (S or AL)-63

GLCS1000-15 (S or AL)-63AL1000-15-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

13’-0”13’-0”13’-0”

16 13/1616 13/1623 9/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

262653

1515

14 15/16

26 @ 1,517#8 @ 1,725#8 @ 1,626#

64’ GLCSLX1000-15 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 13’-0” 23 9/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 6 @ 2,004#78’ GLCSL1000-15 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 13’-0” 23 9/16 22 1/16 25 14 1/8 3 1/16 13 15/16 54 15 8 @ 1,832#

83’GLC1000-15 (S or AL)-83

GLCS1000-15 (S or AL)-83AL1000-15-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

13’-0”13’-0”13’-0”

23 9/1623 9/1623 9/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

545453

1515

14 15/16

34 @ 1,517#10 @ 1,725#10 @ 1,626#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 13’-0” 23 9/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 8 @ 2,004#

103’

GLC1000-15 (S or AL)-103GLCS1000-15 (S or AL)-103

AL1000-15-103GLCSL1000-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

13’-0”13’-0”13’-0”13’-0”

23 9/1623 9/1623 9/1623 9/16

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

54545354

1515

14 15/1615

42 @ 1,517#12 @ 1,725#12 @ 1,626#10 @ 1,832#

124’ GLCSLX1000-15 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 13’-0” 23 9/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 10 @ 2,004#

20’

23’GLC1000-20 (S or AL)-23

GLCS1000-20 (S or AL)-23AL1000-20-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

18’-0”18’-0”18’-0”

18 13/1618 13/1626 15/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

99

26

1515

14 15/16

10 @ 1,548#4 @ 1,756#4 @ 1,648#

28’ GLCSL1000-20 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 18’-0” 18 13/16 21 1/16 25 14 1/8 3 1/16 13 15/16 13 15 4 @ 1,863#

33’GLC1000-20 (S or AL)-33

GLCS1000-20 (S or AL)-33AL1000-20-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

18’-0”18’-0”18’-0”

18 13/1618 13/1626 15/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

131339

1515

14 15/16

14 @ 1,548#6 @ 1,756#6 @ 1,648#

34’ GLCSLX1000-20 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 18’-0” 18 13/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 13 15 4 @ 2,035#

43’GLC1000-20 (S or AL)-43

GLCS1000-20 (S or AL)-43AL1000-20-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

18’-0”18’-0”18’-0”

18 13/1618 13/1626 15/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

191949

1515

14 15/16

18 @ 1,548#6 @ 1,756#6 @ 1,648#

53’

GLC1000-20 (S or AL)-53GLCS1000-20 (S or AL)-53

AL1000-20-53GLCSL1000-20 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

18’-0”18’-0”18’-0”18’-0”

18 13/1618 13/1626 15/1618 13/16

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

19195319

1515

14 15/1615

22 @ 1,548#8 @ 1,756#8 @ 1,648#6 @ 1,863#

63’GLC1000-20 (S or AL)-63

GLCS1000-20 (S or AL)-63AL1000-20-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

18’-0”18’-0”18’-0”

18 13/1618 13/1626 15/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

262653

1515

14 15/16

26 @ 1,548#8 @ 1,756#8 @ 1,648#

64’ GLCSLX1000-20 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 18’-0” 26 15/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 6 @ 2,035#78’ GLCSL1000-20 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 18’-0” 26 15/16 21 1/16 25 14 1/8 3 1/16 13 15/16 54 15 8 @ 1,863#

83’GLC1000-20 (S or AL)-83

GLCS1000-20 (S or AL)-83AL1000-20-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

18’-0”18’-0”18’-0”

26 15/1626 15/1626 15/16

10 3/1618 3/1622 1/16

14 1/822 1/8

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

545453

1515

14 15/16

34 @ 1,548#10 @ 1,756#10 @ 1,648#

94’ GLCSLX1000-20 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 18’-0” 26 15/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 8 @ 2,035#

103’

GLC1000-20 (S or AL)-103GLCS1000-20 (S or AL)-103

AL1000-20-103GLCSL1000-20 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

18’-0”18’-0”18’-0”18’-0”

26 15/1626 15/1626 15/1626 15/16

10 3/1618 3/1622 1/1621 1/16

14 1/822 1/8

-25

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

54545354

1515

14 15/1615

42 @ 1,548#12 @ 1,756#12 @ 1,648#10 @ 1,863#

124’ GLCSLX1000-20 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 18’-0” 26 15/16 24 3/16 28 1/8 14 1/8 3 1/16 17 1/16 54 15 10 @ 2,035#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

47

1000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

23’

23’GLC1000-23 (S or AL)-23

GLCS1000-23 (S or AL)-23AL1000-23-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

21’-0”21’-0”20’-0”

20 13/1620 13/16

30 1/4

10 3/1618 3/1622 1/16

15 11/1623 11/16

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

99

26

1515

14 15/16

10 @ 1,566#4 @ 1,774#4 @ 1,656#

28’ GLCSL1000-23 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 21’-0” 20 13/16 21 1/16 26 9/16 14 1/8 3 1/16 13 15/16 13 15 4 @ 1,881#

33’GLC1000-23 (S or AL)-33

GLCS1000-23 (S or AL)-33AL1000-23-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

21’-0”21’-0”20’-0”

20 13/1620 13/16

30 1/4

10 3/1618 3/1622 1/16

15 11/1623 11/16

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

131339

1515

14 15/16

14 @ 1,566#6 @ 1,774#6 @ 1,656#

34’ GLCSLX1000-23 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 21’-0” 20 13/16 24 3/16 29 11/16 14 1/8 3 1/16 17 1/16 13 15 4 @ 2,053#

43’GLC1000-23 (S or AL)-43

GLCS1000-23 (S or AL)-43AL1000-23-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

21’-0”21’-0”20’-0”

20 13/1620 13/16

30 1/4

10 3/1618 3/1622 1/16

15 11/1623 11/16

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

191949

1515

14 15/16

18 @ 1,566#6 @ 1,774#6 @ 1,656#

53’

GLC1000-23 (S or AL)-53GLCS1000-23 (S or AL)-53

AL1000-23-53GLCSL1000-23 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

21’-0”21’-0”20’-0”21’-0”

20 13/1620 13/16

30 1/420 13/16

10 3/1618 3/1622 1/1621 1/16

15 11/1623 11/16

-26 9/16

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

19195319

1515

14 15/1615

22 @ 1,566#8 @ 1,774#8 @ 1,656#6 @ 1,881#

63’GLC1000-23 (S or AL)-63

GLCS1000-23 (S or AL)-63AL1000-23-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

21’-0”21’-0”20’-0”

20 13/1620 13/16

30 1/4

10 3/1618 3/1622 1/16

15 11/1623 11/16

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

262653

1515

14 15/16

26 @ 1,566#8 @ 1,774#8 @ 1,656#

64’ GLCSLX1000-23 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 21’-0” 30 1/4 24 3/16 29 11/16 14 1/8 3 1/16 17 1/16 54 15 6 @ 2,053#78’ GLCSL1000-23 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 21’-0” 30 1/4 21 1/16 26 9/16 14 1/8 3 1/16 13 15/16 54 15 8 @ 1,881#

83’GLC1000-23 (S or AL)-83

GLCS1000-23 (S or AL)-83AL1000-23-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

21’-0”21’-0”20’-0”

30 1/430 1/430 1/4

10 3/1618 3/1622 1/16

15 11/1623 11/16

-

14 1/814 1/813 1/8

3 1/163 1/1610 1/2

-11 1/16

-

545453

1515

14 15/16

34 @ 1,566#10 @ 1,774#10 @ 1,656#

94’ GLCSLX-23 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 21’-0” 30 1/4 24 3/16 29 11/16 14 1/8 3 1/16 17 1/16 54 15 8 @ 2,053#

103’

GLC1000-23 (S or AL)-103GLCS1000-23 (S or AL)-103

AL1000-23-103GLCSL1000-23 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

21’-0”21’-0”20’-0”21’-0”

30 1/430 1/430 1/430 1/4

10 3/1618 3/1622 1/1621 1/16

15 11/1623 11/16

-26 9/16

14 1/814 1/813 1/814 1/8

3 1/163 1/1610 1/23 1/16

-11 1/16

-13 15/16

54545354

1515

14 15/1615

42 @ 1,566#12 @ 1,774#12 @ 1,656#10 @ 1,881#

124’ GLCSLX1000-23 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 21’-0” 30 1/4 24 3/16 29 11/16 14 1/8 3 1/16 17 1/16 54 15 10 @ 2,053#

28’

23’GLC1000-28 (S or AL)-23

GLCS1000-28 (S or AL)-23AL1000-28-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

25’-0”25’-0”25’-0”

24 13/1624 13/16

37

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

1717

15 1/4

3 1/163 1/1612 5/8

-11 1/16

-

99

26

21 1/1621 1/16

21

10 @ 1,614#4 @ 1,821#4 @ 1,686#

28’ GLCSL1000-28 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 25’-0” 24 13/16 23 5/16 26 9/16 17 3 1/16 13 15/16 13 21 1/16 4 @ 1,928#

33’GLC1000-28 (S or AL)-33

GLCS1000-28 (S or AL)-33AL1000-28-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

25’-0”25’-0”25’-0”

24 13/1624 13/16

37

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

1717

15 1/4

3 1/163 1/1612 5/8

-11 1/16

-

131330

21 1/1621 1/16

21

14 @ 1,614#6 @ 1,821#6 @ 1,686#

34’ GLCSLX1000-28 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 25’-0” 24 13/16 26 7/16 29 11/16 17 3 1/16 17 1/16 13 21 1/16 4 @ 2,100#

43’GLC1000-28 (S or AL)-43

GLCS1000-28 (S or AL)-43AL1000-28-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

25’-0”25’-0”25’-0”

24 13/1624 13/16

37

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

1717

15 1/4

3 1/163 1/1612 5/8

-11 1/16

-

191949

21 1/1621 1/16

21

18 @ 1,614#6 @ 1,821#6 @ 1,686#

53’

GLC1000-28 (S or AL)-53GLCS1000-28 (S or AL)-53

AL1000-28-53GLCSL1000-28 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

25’-0”25’-0”25’-0”25’-0”

24 13/1624 13/16

3724 13/16

12 7/1620 7/1623 5/8

23 5/16

15 11/1623 11/16

-26 9/16

1717

15 1/417

3 1/163 1/1612 5/83 1/16

-11 1/16

-13 15/16

19195319

21 1/1621 1/16

2121 1/16

22 @ 1,614#8 @ 1,821#8 @ 1,686#6 @ 1,928#

63’GLC1000-28 (S or AL)-63

GLCS1000-28 (S or AL)-63AL1000-28-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

25’-0”25’-0”25’-0”

24 13/1624 13/16

37

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

1717

15 1/4

3 1/163 1/1612 5/8

-11 1/16

-

262653

21 1/1621 1/16

21

26 @ 1,614#8 @ 1,821#8 @ 1,686#

64’ GLCSLX1000-28 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 25’-0” 37 26 7/16 29 11/16 17 3 1/16 17 1/16 54 21 1/16 6 @ 2,100#78’ GLCSL1000-28 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 25’-0” 37 23 5/16 26 9/16 17 3 1/16 13 15/16 54 21 1/16 8 @ 1,928#

83’GLC1000-28 (S or AL)-83

GLCS1000-28 (S or AL)-83AL1000-28-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

25’-0”25’-0”25’-0”

373737

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

1717

15 1/4

3 1/163 1/1612 5/8

-11 1/16

-

545453

21 1/1621 1/16

21

34 @ 1,614#10 @ 1,821#10 @ 1,686#

94’ GLCSLX1000-28 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 25’-0” 37 26 7/16 29 11/16 17 3 1/16 17 1/16 54 21 1/16 8 @ 2,100#

103’

GLC1000-28 (S or AL)-103GLCS1000-28 (S or AL)-103

AL1000-28-103GLCSL1000-28 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

25’-0”25’-0”25’-0”25’-0”

37373737

12 7/1620 7/1623 5/8

23 5/16

15 11/1623 11/16

-26 9/16

1717

15 1/417

3 1/163 1/1612 5/83 1/16

-11 1/16

-13 15/16

54545354

21 1/1621 1/16

2121 1/16

42 @ 1,614#12 @ 1,821#12 @ 1,686#10 @ 1,928#

124’ GLCSLX1000-28 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 25’-0” 37 26 7/16 29 11/16 17 3 1/16 17 1/16 54 21 1/16 10 @ 2,100#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

48

1000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

34’

28’ GLCSL1000-15 (S or AL)-28 Steel 25’ 3 1/8 7 7/8 30’-0” 28 13/16 23 5/16 26 9/16 20 1/8 3 1/16 13 15/16 13 21 1/16 4 @ 2,014#

33’GLC1000-15 (S or AL)-33

GLCS1000-15 (S or AL)-33AL1000-15-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

30’-0”30’-0”30’-0”

28 13/1628 13/1643 13/16

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

20 1/820 1/816 3/4

3 1/163 1/1614 1/8

-11 1/16

-

131339

21 1/1621 1/16

21

14 @ 1,700#6 @ 1,907#6 @ 1,732#

34’ GLCSLX1000-15 (S or AL)-34 Steel 30’ 3 1/8 7 7/8 30’-0” 28 13/16 26 7/16 29 11/16 20 1/8 3 1/16 17 1/16 13 21 1/16 4 @ 2,187#

43’GLC1000-15 (S or AL)-43

GLCS1000-15 (S or AL)-43AL1000-15-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

30’-0”30’-0”30’-0”

28 13/1628 13/1643 13/16

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

20 1/820 1/816 3/4

3 1/163 1/1614 1/8

-11 1/16

-

191949

21 1/1621 1/16

21

18 @ 1,700#6 @ 1,907#6 @ 1,732#

53’

GLC1000-15 (S or AL)-53GLCS1000-15 (S or AL)-53

AL1000-15-53GLCSL1000-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

30’-0”30’-0”30’-0”30’-0”

28 13/1628 13/1643 13/1628 13/16

12 7/1620 7/1623 5/8

23 5/16

15 11/1623 11/16

-26 9/16

20 1/820 1/816 3/420 1/8

3 1/163 1/1614 1/83 1/16

-11 1/16

-13 15/16

19195319

21 1/1621 1/16

2121 1/16

22 @ 1,700#8 @ 1,907#8 @ 1,732#6 @ 2,014#

63’GLC1000-15 (S or AL)-63

GLCS1000-15 (S or AL)-63AL1000-15-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

30’-0”30’-0”30’-0”

28 13/1628 13/1643 13/16

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

20 1/820 1/816 3/4

3 1/163 1/1614 1/8

-11 1/16

-

262653

21 1/1621 1/16

21

26 @ 1,700#8 @ 1,907#8 @ 1,732#

64’ GLCSLX1000-15 (S or AL)-64 Steel 30’ 3 1/8 7 7/8 30’-0” 43 13/16 26 7/16 29 11/16 20 1/8 3 1/16 17 1/16 54 21 1/16 6 @ 2,187#78’ GLCSL1000-15 (S or AL)-78 Steel 25’ 3 1/8 7 7/8 30’-0” 43 13/16 23 5/16 26 9/16 20 1/8 3 1/16 13 15/16 54 21 1/16 8 @ 2,014#

83’GLC1000-15 (S or AL)-83

GLCS1000-15 (S or AL)-83AL1000-15-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

7 7/87 7/8

7 13/16

30’-0”30’-0”30’-0”

43 13/1643 13/1643 13/16

12 7/1620 7/1623 5/8

15 11/1623 11/16

-

20 1/820 1/816 3/4

3 1/163 1/1614 1/8

-11 1/16

-

545453

21 1/1621 1/16

21

34 @ 1,700#10 @ 1,907#10 @ 1,732#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 3 1/8 7 7/8 30’-0” 43 13/16 26 7/16 29 11/16 20 1/8 3 1/16 17 1/16 54 21 1/16 8 @ 2,187#

103’

GLC1000-15 (S or AL)-103GLCS1000-15 (S or AL)-103

AL1000-15-103GLCSL1000-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

7 7/87 7/8

7 13/167 7/8

30’-0”30’-0”30’-0”30’-0”

43 13/1643 13/1643 13/1643 13/16

12 7/1620 7/1623 5/8

23 5/16

15 11/1623 11/16

-26 9/16

20 1/820 1/816 3/420 1/8

3 1/163 1/1614 1/83 1/16

-11 1/16

-13 15/16

54545354

21 1/1621 1/16

2121 1/16

42 @ 1,700#12 @ 1,907#12 @ 1,732#10 @ 2,014#

124’ GLCSLX1000-15 (S or AL)-124 Steel 30’ 3 1/8 7 7/8 30’-0” 43 13/16 26 7/16 29 11/16 20 1/8 3 1/16 17 1/16 54 21 1/16 10 @ 2,187#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

8’

11’-6”GLC2000-8 (S or AL)-11.5

GLCS2000-8 (S or AL)-11.5AL2000-8-11.5

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

1111

13 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

99

13

16 1/1616 1/16

16 15/16

6 @ 2,902#4 @ 3,185#4 @ 3,026#

23’GLC2000-8 (S or AL)-23

GLCS2000-8 (S or AL)-23AL2000-8-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

1111

13 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

99

26

16 1/1616 1/16

16 15/16

10 @ 2,902#4 @ 3,185#4 @ 3,026#

28’ GLCSL2000-8 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 6’-6” 11 23 27 7/16 8 7/8 3 1/2 15 3/8 13 16 1/16 4 @ 3,331#

33’GLC2000-8 (S or AL)-33

GLCS2000-8 (S or AL)-33AL2000-8-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

1111

13 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

131339

16 1/1616 1/16

16 15/16

14 @ 2,902#6 @ 3,185#6 @ 3,026#

34’ GLCSLX2000-8 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 6’-6” 11 25 5/8 30 1/16 8 7/8 3 1/2 18 13 16 1/16 4 @ 3,451#

43’GLC2000-8 (S or AL)-43

GLCS2000-8 (S or AL)-43AL2000-8-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

1111

13 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

191949

16 1/1616 1/16

16 15/16

18 @ 2,902#6 @ 3,185#6 @ 3,026#

53’

GLC2000-8 (S or AL)-53GLCS2000-8 (S or AL)-53

AL2000-8-53GLCSL2000-8 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

6’-6”6’-6”6’-6”6’-6”

1111

13 11/1611

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

8 7/88 7/8

8 1/168 7/8

3 1/23 1/25 5/83 1/2

-12-

15 3/8

19195319

16 1/1616 1/16

16 15/1616 1/16

22 @ 2,902#8 @ 3,185#8 @ 3,026#6 @ 3,331#

63’GLC2000-8 (S or AL)-63

GLCS2000-8 (S or AL)-63AL2000-8-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

1111

13 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

262653

16 1/1616 1/16

16 15/16

26 @ 2,902#8 @ 3,185#8 @ 3,026#

64’ GLCSLX2000-8 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 6’-6” 13 11/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 6 @ 3,451#78’ GLCSL2000-8 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 6’-6” 13 11/16 23 27 7/16 8 7/8 3 1/2 15 3/8 54 16 1/16 8 @ 3,331#

83’GLC2000-8 (S or AL)-83

GLCS2000-8 (S or AL)-83AL2000-8-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

6’-6”6’-6”6’-6”

13 11/1613 11/1613 11/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

8 1/16

3 1/23 1/25 5/8

-12-

545453

16 1/1616 1/16

16 15/16

34 @ 2,902#10 @ 3,185#10 @ 3,026#

94’ GLCSLX-8 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 6’-6” 13 11/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 8 @ 3,451#

103’

GLC2000-8 (S or AL)-103GLCS2000-8 (S or AL)-103

AL2000-8-103GLCSL2000-8 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

6’-6”6’-6”6’-6”6’-6”

13 11/1613 11/1613 11/1613 11/16

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

8 7/88 7/8

8 1/168 7/8

3 1/23 1/25 5/83 1/2

-12-

15 3/8

54545354

16 1/1616 1/16

16 15/1616 1/16

42 @ 2,902#12 @ 3,185#12 @ 3,026#10 @ 3,331#

124’ GLCSLX2000-8 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 6’-6” 13 11/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 10 @ 3,451#

10’

11’-6”GLC2000-10 ( S or AL)-11.5

GLCS2000-10 (S or AL)-11.5AL2000-10-11.5

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

1313

17 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

99

13

16 1/1616 1/16

16 15/16

6 @ 2,913#4 @ 3,196#4 @ 3,046#

23’GLC2000-10 (S or AL)-23

GLCS2000-10 (S or AL)-23AL2000-10-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

1313

17 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

99

26

16 1/1616 1/16

16 15/16

10 @ 2,913#4 @ 3,196#4 @ 3,046#

28’ GLCSL2000-10 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 8’-0” 13 23 27 7/16 8 7/8 3 1/2 15 3/8 13 16 1/16 4 @ 3,342#

33’GLC2000-10 (S or AL)-33

GLCS2000-10 (S or AL)-33AL2000-10-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

1313

17 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

131339

16 1/1616 1/16

16 15/16

14 @ 2,913#6 @ 3,196#6 @ 3,046#

34’ GLCSLX2000-10 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 8’-0” 13 25 5/8 30 1/16 8 7/8 3 1/2 18 13 16 1/16 4 @ 3,462#

43’GLC2000-10 (S or AL)-43

GLCS2000-10 (S or AL)-43AL2000-10-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

1313

17 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

191949

16 1/1616 1/16

16 15/16

18 @ 2,913#6 @ 3,196#6 @ 3,046#

53’

GLC2000-10 (S or AL)-53GLCS2000-10 (S or AL)-53

AL2000-10-53GLCSL2000-10 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

8’-0”8’-0”8’-0”8’-0”

1313

17 1/1613

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

8 7/88 7/8

13 3/88 7/8

3 1/23 1/2

113 1/2

-12-

15 3/8

19195319

16 1/1616 1/16

16 15/1616 1/16

22 @ 2,913#8 @ 3,196#8 @ 3,046#6 @ 3,342#

63’GLC2000-10 (S or AL)-63

GLCS2000-10 (S or AL)-63AL2000-10-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

1313

17 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

262653

16 1/1616 1/16

16 15/16

26 @ 2,913#8 @ 3,196#8 @ 3,046#

64’ GLCSLX2000-10 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 8’-0” 17 1/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 6 @ 3,462#78’ GLCSL2000-10 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 8’-0” 17 1/16 23 27 7/16 8 7/8 3 1/2 15 3/8 54 16 1/16 8 @ 3,342#

83’GLC2000-10 (S or AL)-83

GLCS2000-10 (S or AL)-83AL2000-10-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

8’-0”8’-0”8’-0”

17 1/1617 1/1617 1/16

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

8 7/88 7/8

13 3/8

3 1/23 1/2

11

-12-

545453

16 1/1616 1/16

16 15/16

34 @ 2,913#10 @ 3,196#10 @ 3,046#

94’ GLCSLX2000-10 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 8’-0” 17 1/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 8 @ 3,462#

103’

GLC2000-10 (S or AL)-103GLCS2000-10 (S or AL)-103

AL2000-10-103GLCSL2000-10 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

8’-0”8’-0”8’-0”8’-0”

17 1/1617 1/1617 1/1617 1/16

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

8 7/88 7/8

13 3/88 7/8

3 1/23 1/2

113 1/2

-12-

15 3/8

54545354

16 1/1616 1/16

16 15/1616 1/16

42 @ 2,913#12 @ 3,196#12 @ 3,046#10 @ 3,342#

124’ GLCSLX2000-10 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 8’-0” 17 1/16 25 5/8 30 1/16 8 7/8 3 1/2 18 54 16 1/16 10 @ 3,462#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

2000# CAPACITY

49

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

50

2000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

15’

23’GLC2000-15 (S or AL)-23

GLCS2000-15 (S or AL)-23AL2000-15-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

13’-0”13’-0”13’-0”

1717

23 3/4

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/813 3/8

3 1/23 1/2

11

-12-

99

26

16 1/1616 1/16

16 15/16

10 @ 2,965#4 @ 3,248#4 @ 3,073#

28’ GLCSL2000-15 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 13’-0” 17 23 27 7/16 14 7/8 3 1/2 15 3/8 13 16 1/16 4 @ 3,394#

33’GLC2000-15 (S or AL)-33

GLCS2000-15 (S or AL)-33AL2000-15-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

13’-0”13’-0”13’-0”

1717

23 3/4

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/813 3/8

3 1/23 1/2

11

-12-

131339

16 1/1616 1/16

16 15/16

14 @ 2,965#6 @ 3,248#6 @ 3,073#

34’ GLCSLX2000-15 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 13’-0” 17 25 5/8 30 1/16 14 7/8 3 1/2 18 13 16 1/16 4 @ 3,514#

43’GLC2000-15 (S or AL)-43

GLCS2000-15 (S or AL)-43AL2000-15-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

13’-0”13’-0”13’-0”

1717

23 3/4

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/813 3/8

3 1/23 1/2

11

-12-

191949

16 1/1616 1/16

16 15/16

18 @ 2,965#6 @ 3,248#6 @ 3,073#

53’

GLC2000-15 (S or AL)-53GLCS2000-15 (S or AL)-53

AL2000-15-53GLCSL2000-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

13’-0”13’-0”13’-0”13’-0”

1717

23 3/417

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

14 7/814 7/813 3/814 7/8

3 1/23 1/2

113 1/2

-12-

15 3/8

19195319

16 1/1616 1/16

16 15/1616 1/16

22 @ 2,965#8 @ 3,248#8 @ 3,073#6 @ 3,394#

63’GLC2000-15 (S or AL)-63

GLCS2000-15 (S or AL)-63AL2000-15-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

13’-0”13’-0”13’-0”

1717

23 3/4

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/813 3/8

3 1/23 1/2

11

-12-

262653

16 1/1616 1/16

16 15/16

26 @ 2,965#8 @ 3,248#8 @ 3,073#

64’ GLCSLX2000-15 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 13’-0” 23 3/4 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 6 @ 3,514#78’ GLCSL2000-15 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 13’-0” 23 3/4 23 27 7/16 14 7/8 3 1/2 15 3/8 54 16 1/16 8 @ 3,394#

83’GLC2000-15 (S or AL)-83

GLCS2000-15 (S or AL)-83AL2000-15-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

13’-0”13’-0”13’-0”

23 3/423 3/423 3/4

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/813 3/8

3 1/23 1/2

11

-12-

545453

16 1/1616 1/16

16 15/16

34 @ 2,965#10 @ 3,248#10 @ 3,073#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 13’-0” 23 3/4 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 8 @ 3,514#

103’

GLC2000-15 (S or AL)-103GLCS2000-15 (S or AL)-103

AL2000-15-103GLCSL2000-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

13’-0”13’-0”13’-0”13’-0”

23 3/423 3/423 3/423 3/4

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

14 7/814 7/813 3/814 7/8

3 1/23 1/2

113 1/2

-12-

15 3/8

54545354

16 1/1616 1/16

16 15/1616 1/16

42 @ 2,965#12 @ 3,248#12 @ 3,073#10 @ 3,394#

124’ GLCSLX2000-15 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 13’-0” 23 3/4 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 10 @ 3,514#

20’

23’GLC2000-20 (S or AL)-23

GLCS2000-20 (S or AL)-23AL2000-20-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

18’-0”18’-0”18’-0”

1919

27 1/8

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

99

26

16 1/1616 1/16

16 15/16

10 @ 3,007#4 @ 3,290#4 @ 3,105#

28’ GLCSL2000-20 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 18’-0” 19 23 27 7/16 14 7/8 3 1/2 15 3/8 13 16 1/16 4 @ 3,437#

33’GLC2000-20 (S or AL)-33

GLCS2000-20 (S or AL)-33AL2000-20-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

18’-0”18’-0”18’-0”

1919

27 1/8

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

131339

16 1/1616 1/16

16 15/16

14 @ 3,007#6 @ 3,290#6 @ 3,105#

34’ GLCSLX2000-20 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 18’-0” 19 25 5/8 30 1/16 14 7/8 3 1/2 18 13 16 1/16 4 @ 3,556#

43’GLC2000-20 (S or AL)-43

GLCS2000-20 (S or AL)-43AL2000-20-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

18’-0”18’-0”18’-0”

1919

27 1/8

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

191949

16 1/1616 1/16

16 15/16

18 @ 3,007#6 @ 3,290#6 @ 3,105#

53’

GLC2000-20 (S or AL)-53GLCS2000-20 (S or AL)-53

AL2000-20-53GLCSL2000-20 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

18’-0”18’-0”18’-0”18’-0”

1919

27 1/819

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

14 7/814 7/815 1/214 7/8

3 1/23 1/2

13 1/83 1/2

-12-

15 3/8

19195319

16 1/1616 1/16

16 15/1616 1/16

22 @ 3,007#8 @ 3,290#8 @ 3,105#6 @ 3,437#

63’GLC2000-20 (S or AL)-63

GLCS2000-20 (S or AL)-63AL2000-20-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

18’-0”18’-0”18’-0”

1919

27 1/8

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

262653

16 1/1616 1/16

16 15/16

26 @ 3,007#8 @ 3,290#8 @ 3,105#

64’ GLCSLX2000-20 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 18’-0” 27 1/8 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 6 @ 3,556#78’ GLCSL2000-20 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 18’-0” 27 1/8 23 27 7/16 14 7/8 3 1/2 15 3/8 54 16 1/16 8 @ 3,437#

83’GLC2000-20 (S or AL)-83

GLCS2000-20 (S or AL)-83AL2000-20-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

18’-0”18’-0”18’-0”

27 1/827 1/827 1/8

11 1/819 5/8

25 5/16

15 9/1624 1/16

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

545453

16 1/1616 1/16

16 15/16

34 @ 3,007#10 @ 3,290#10 @ 3,105#

94’ GLCSLX2000-20 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 18’-0” 27 1/8 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 8 @ 3,556#

103’

GLC2000-20 (S or AL)-103GLCS2000-20 (S or AL)-103

AL2000-20-103GLCSL2000-20 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

18’-0”18’-0”18’-0”18’-0”

27 1/827 1/827 1/827 1/8

11 1/819 5/8

25 5/1623

15 9/1624 1/16

-27 7/16

14 7/814 7/815 1/214 7/8

3 1/23 1/2

13 1/83 1/2

-12-

15 3/8

54545354

16 1/1616 1/16

16 15/1616 1/16

42 @ 3,007#12 @ 3,290#12 @ 3,105#10 @ 3,437#

124’ GLCSLX2000-20 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 18’-0” 27 1/8 25 5/8 30 1/16 14 7/8 3 1/2 18 54 16 1/16 10 @ 3,556#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

51

2000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

23’

23’GLC2000-23 (S or AL)-23

GLCS2000-23 (S or AL)-23AL2000-23-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

21’-0”21’-0”20’-0”

2121

30 7/16

11 1/819 5/8

25 5/16

17 9/1626 1/6

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

99

26

16 1/1616 1/16

16 15/16

10 @ 3,033#4 @ 3,316#4 @ 3,116#

28’ GLCSL2000-23 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 21’-0” 21 23 29 7/16 14 7/8 3 1/2 15 3/8 13 16 1/16 4 @ 3,462#

33’GLC2000-23 (S or AL)-33

GLCS2000-23 (S or AL)-33AL2000-23-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

21’-0”21’-0”20’-0”

2121

30 7/16

11 1/819 5/8

25 5/16

17 9/1626 1/6

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

131339

16 1/1616 1/16

16 15/16

14 @ 3,033#6 @ 3,316#6 @ 3,116#

34’ GLCSLX2000-23 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 21’-0” 21 25 5/8 32 1/16 14 7/8 3 1/2 18 13 16 1/16 4 @ 3,582#

43’GLC2000-23 (S or AL)-43

GLCS2000-23 (S or AL)-43AL2000-23-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

21’-0”21’-0”20’-0”

2121

30 7/16

11 1/819 5/8

25 5/16

17 9/1626 1/6

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

191949

16 1/1616 1/16

16 15/16

18 @ 3,033#6 @ 3,316#6 @ 3,116#

53’

GLC2000-23 (S or AL)-53GLCS2000-23 (S or AL)-53

AL2000-23-53GLCSL2000-23 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

21’-0”21’-0”20’-0”21’-0”

2121

30 7/1621

11 1/819 5/8

25 5/1623

17 9/1626 1/6

-29 7/16

14 7/814 7/815 1/214 7/8

3 1/23 1/2

13 1/83 1/2

-12-

15 3/8

19195319

16 1/1616 1/16

16 15/1616 1/16

22 @ 3,033#8 @ 3,316#8 @ 3,116#6 @ 3,462#

63’GLC2000-23 (S or AL)-63

GLCS2000-23 (S or AL)-63AL2000-23-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

21’-0”21’-0”20’-0”

2121

30 7/16

11 1/819 5/8

25 5/16

17 9/1626 1/6

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

262653

16 1/1616 1/16

16 15/16

26 @ 3,033#8 @ 3,316#8 @ 3,116#

64’ GLCSLX2000-23 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 21’-0” 30 7/16 25 5/8 32 1/16 14 7/8 3 1/2 18 54 16 1/16 6 @ 3,582#78’ GLCSL2000-23 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 21’-0” 30 7/16 23 29 7/16 14 7/8 3 1/2 15 3/8 54 16 1/16 8 @ 3,462#

83’GLC2000-23 (S or AL)-83

GLCS2000-23 (S or AL)-83AL2000-23-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

21’-0”21’-0”20’-0”

30 7/1630 7/1630 7/16

11 1/819 5/8

25 5/16

17 9/1626 1/6

-

14 7/814 7/815 1/2

3 1/23 1/2

13 1/8

-12-

545453

16 1/1616 1/16

16 15/16

34 @ 3,033#10 @ 3,316#10 @ 3,116#

94’ GLCSLX-23 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 21’-0” 30 7/16 25 5/8 32 1/16 14 7/8 3 1/2 18 54 16 1/16 8 @ 3,582#

103’

GLC2000-23 (S or AL)-103GLCS2000-23 (S or AL)-103

AL2000-23-103GLCSL2000-23 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

21’-0”21’-0”20’-0”21’-0”

30 7/1630 7/1630 7/1630 7/16

11 1/819 5/8

25 5/1623

17 9/1626 1/6

-29 7/16

14 7/814 7/815 1/214 7/8

3 1/23 1/2

13 1/83 1/2

-12-

15 3/8

54545354

16 1/1616 1/16

16 15/1616 1/16

42 @ 3,033#12 @ 3,316#12 @ 3,116#10 @ 3,462#

124’ GLCSLX2000-23 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 21’-0” 30 7/16 25 5/8 32 1/16 14 7/8 3 1/2 18 54 16 1/16 10 @ 3,582#

28’

23’GLC2000-28 (S or AL)-23

GLCS2000-28 (S or AL)-23AL2000-28-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

25’-0”25’-0”25’-0”

2525

37 3/16

14 7/1622 15/16

27 1/2

17 9/1626 1/6

-

18 1/418 1/4

17

3 1/23 1/2

14 5/8

-12-

99

26

25 7/825 7/8

21

10 @ 3,097#4 @ 3,380#4 @ 3,162#

28’ GLCSL2000-28 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 25’-0” 25 26 5/16 29 7/16 18 1/4 3 1/2 15 3/8 13 25 7/8 4 @ 3,527#

33’GLC2000-28 (S or AL)-33

GLCS2000-28 (S or AL)-33AL2000-28-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

25’-0”25’-0”25’-0”

2525

37 3/16

14 7/1622 15/16

27 1/2

17 9/1626 1/6

-

18 1/418 1/4

17

3 1/23 1/2

14 5/8

-12-

131330

25 7/825 7/8

21

14 @ 3,097#6 @ 3,380#6 @ 3,162#

34’ GLCSLX2000-28 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 25’-0” 25 28 15/16 32 1/16 18 1/4 3 1/2 18 13 25 7/8 4 @ 3,646#

43’GLC2000-28 (S or AL)-43

GLCS2000-28 (S or AL)-43AL2000-28-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

25’-0”25’-0”25’-0”

2525

37 3/16

14 7/1622 15/16

27 1/2

17 9/1626 1/6

-

18 1/418 1/4

17

3 1/23 1/2

14 5/8

-12-

191949

25 7/825 7/8

21

18 @ 3,097#6 @ 3,380#6 @ 3,162#

53’

GLC2000-28 (S or AL)-53GLCS2000-28 (S or AL)-53

AL2000-28-53GLCSL2000-28 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

25’-0”25’-0”25’-0”25’-0”

2525

37 3/1625

14 7/1622 15/16

27 1/226 5/16

17 9/1626 1/6

-29 7/16

18 1/418 1/4

1718 1/4

3 1/23 1/2

14 5/83 1/2

-12-

15 3/8

19195319

25 7/825 7/8

2125 7/8

22 @ 3,097#8 @ 3,380#8 @ 3,162#6 @ 3,527#

63’GLC2000-28 (S or AL)-63

GLCS2000-28 (S or AL)-63AL2000-28-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

25’-0”25’-0”25’-0”

2525

37 3/16

14 7/1622 15/16

27 1/2

17 9/1626 1/6

-

18 1/418 1/4

17

3 1/23 1/2

14 5/8

-12-

262653

25 7/825 7/8

21

26 @ 3,097#8 @ 3,380#8 @ 3,162#

64’ GLCSLX2000-28 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 25’-0” 37 3/16 28 15/16 32 1/16 18 1/4 3 1/2 18 54 25 7/8 6 @ 3,646#78’ GLCSL2000-28 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 25’-0” 37 3/16 26 5/16 29 7/16 18 1/4 3 1/2 15 3/8 54 25 7/8 8 @ 3,527#

83’GLC2000-28 (S or AL)-83

GLCS2000-28 (S or AL)-83AL2000-28-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

25’-0”25’-0”25’-0”

37 3/1637 3/1637 3/16

14 7/1622 15/16

27 1/2

17 9/1626 1/6

-

18 1/418 1/4

17

3 1/23 1/2

14 5/8

-12-

545453

25 7/825 7/8

21

34 @ 3,097#10 @ 3,380#10 @ 3,162#

94’ GLCSLX2000-28 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 25’-0” 37 3/16 28 15/16 32 1/16 18 1/4 3 1/2 18 54 25 7/8 8 @ 3,646#

103’

GLC2000-28 (S or AL)-103GLCS2000-28 (S or AL)-103

AL2000-28-103GLCSL2000-28 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

25’-0”25’-0”25’-0”25’-0”

37 3/1637 3/1637 3/1637 3/16

14 7/1622 15/16

27 1/226 5/16

17 9/1626 1/6

-29 7/16

18 1/418 1/4

1718 1/4

3 1/23 1/2

14 5/83 1/2

-12-

15 3/8

54545354

25 7/825 7/8

2125 7/8

42 @ 3,097#12 @ 3,380#12 @ 3,162#10 @ 3,527#

124’ GLCSLX2000-28 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 25’-0” 37 3/16 28 15/16 32 1/16 18 1/4 3 1/2 18 54 25 7/8 10 @ 3,646#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

52

2000# CAPACITYCEILING MOUNTED WORK STATION BRIDGE CRANES

BRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

34’

28’ GLCSL2000-15 (S or AL)-28 Steel 25’ 2 7/8 8 1/16 30’-0” 29 26 5/16 29 7/16 20 7/8 3 1/2 15 3/8 13 25 7/8 4 @ 3,587#

33’GLC2000-15 (S or AL)-33

GLCS2000-15 (S or AL)-33AL2000-15-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

30’-0”30’-0”30’-0”

2929

43 7/8

14 7/1622 15/16

27 1/2

17 9/1626 1/16

-

20 7/820 7/817 7/8

3 1/23 1/2

15 1/2

-12-

131339

25 7/825 7/8

21

14 @ 3,157#6 @ 3,440#6 @ 3,245#

34’ GLCSLX2000-15 (S or AL)-34 Steel 30’ 2 7/8 8 1/16 30’-0” 29 28 15/16 32 1/16 20 7/8 3 1/2 18 13 25 7/8 4 @ 3,706#

43’GLC2000-15 (S or AL)-43

GLCS2000-15 (S or AL)-43AL2000-15-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

30’-0”30’-0”30’-0”

2929

43 7/8

14 7/1622 15/16

27 1/2

17 9/1626 1/16

-

20 7/820 7/817 7/8

3 1/23 1/2

15 1/2

-12-

191949

25 7/825 7/8

21

18 @ 3,157#6 @ 3,440#6 @ 3,245#

53’

GLC2000-15 (S or AL)-53GLCS2000-15 (S or AL)-53

AL2000-15-53GLCSL2000-15 (S or AL)-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

30’-0”30’-0”30’-0”30’-0”

2929

43 7/829

14 7/1622 15/16

27 1/226 5/16

17 9/1626 1/16

-29 7/16

20 7/820 7/817 7/820 7/8

3 1/23 1/2

15 1/23 1/2

-12-

15 3/8

19195319

25 7/825 7/8

2125 7/8

22 @ 3,157#8 @ 3,440#8 @ 3,245#6 @ 3 ,587#

63’GLC2000-15 (S or AL)-63

GLCS2000-15 (S or AL)-63AL2000-15-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

30’-0”30’-0”30’-0”

2929

43 7/8

14 7/1622 15/16

27 1/2

17 9/1626 1/16

-

20 7/820 7/817 7/8

3 1/23 1/2

15 1/2

-12-

262653

25 7/825 7/8

21

26 @ 3,157#8 @ 3,440#8 @ 3,245#

64’ GLCSLX2000-15 (S or AL)-64 Steel 30’ 2 7/8 8 1/16 30’-0” 43 7/8 28 15/16 32 1/16 20 7/8 3 1/2 18 54 25 7/8 6 @ 3,706#78’ GLCSL2000-15 (S or AL)-78 Steel 25’ 2 7/8 8 1/16 30’-0” 43 7/8 26 5/16 29 7/16 20 7/8 3 1/2 15 3/8 54 25 7/8 8 @ 3,587#

83’GLC2000-15 (S or AL)-83

GLCS2000-15 (S or AL)-83AL2000-15-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

8 1/168 1/16

8

30’-0”30’-0”30’-0”

43 7/843 7/843 7/8

14 7/1622 15/16

27 1/2

17 9/1626 1/16

-

20 7/820 7/817 7/8

3 1/23 1/2

15 1/2

-12-

545453

25 7/825 7/8

21

34 @ 3,157#10 @ 3,440#10 @ 3,245#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 2 7/8 8 1/16 30’-0” 43 7/8 28 15/16 32 1/16 20 7/8 3 1/2 18 54 25 7/8 8 @ 3,706#

103’

GLC2000-15 (S or AL)-103GLCS2000-15 (S or AL)-103

AL2000-15-103GLCSL2000-15 (S or AL)-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

8 1/168 1/16

88 1/16

30’-0”30’-0”30’-0”30’-0”

43 7/843 7/843 7/843 7/8

14 7/1622 15/16

27 1/226 5/16

17 9/1626 1/16

-29 7/16

20 7/820 7/817 7/820 7/8

3 1/23 1/2

15 1/23 1/2

-12-

15 3/8

54545354

25 7/825 7/8

2125 7/8

42 @ 3,157#12 @ 3,440#12 @ 3,245#10 @ 3,587#

124’ GLCSLX2000-15 (S or AL)-124 Steel 30’ 2 7/8 8 1/16 30’-0” 43 7/8 28 15/16 32 1/16 20 7/8 3 1/2 18 54 25 7/8 10 @ 3,706#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILIN

G M

OU

NTED

WO

RK

STATION

BR

IDG

E CR

AN

ES

4000# CAPACITY

53

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N B

RID

GE

CR

AN

ES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

15’

23’ GLC4000-15 (S or AL)-23GLCS4000-15 (S or AL)-23

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

12’-6”12’-6”

2424

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

99

25 7/825 7/8

14 @ 5,730#4 @ 6,143#

28’ GLCSL4000-15 (S or AL)-28 Steel 25’ 3 3/8 15 1/16 12’-6” 24 31 7/16 34 1/2 21 3/8 3 1/2 20 13 25 7/8 4 @ 6,385#

33’ GLC4000-15 (S or AL)-33GLCS4000-15 (S or AL)-33

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

12’-6”12’-6”

2424

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1313

25 7/825 7/8

20 @ 5,730#6 @ 6,143#

34’ GLCSLX4000-15 (S or AL)-34 Steel 30’ 3 3/8 15 1/16 12’-6” 24 32 7/16 35 1/2 21 3/8 3 1/2 22 13 25 7/8 4 @ 6,652#

43’ GLC4000-15 (S or AL)-43GLCS4000-15 (S or AL)-43

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

12’-6”12’-6”

2424

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1919

25 7/825 7/8

24 @ 5,730#6 @ 6,143#

53’GLC4000-15 (S or AL)-53

GLCS4000-15 (S or AL)-53GLCSL4000-15 (S or AL)-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

12’-6”12’-6”12’-6”

242424

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

191919

25 7/825 7/825 7/8

30 @ 5,730#8 @ 6,143#6 @ 6,385#

63’ GLC4000-15 (S or AL)-63GLCS4000-15 (S or AL)-63

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

12’-6”12’-6”

2424

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

2626

25 7/825 7/8

34 @ 5,730#8 @ 6,143#

64’ GLCSLX4000-15 (S or AL)-64 Steel 30’ 3 3/8 15 1/16 12’-6” 30 3/4 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 6 @ 6,652#78’ GLCSL4000-15 (S or AL)-78 Steel 25’ 3 3/8 15 1/16 12’-6” 30 3/4 31 7/16 34 1/2 21 3/8 3 1/2 20 54 25 7/8 8 @ 6,385#

83’ GLC4000-15 (S or AL)-83GLCS4000-15 (S or AL)-83

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

12’-6”12’-6”

30 3/430 3/4

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

5454

25 7/825 7/8

44 @ 5,730#10 @ 6,143#

94’ GLCSLX-15 (S or AL)-94 Steel 30’ 3 3/8 15 1/16 12’-6” 30 3/4 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 8 @ 6,652#

103’GLC4000-15 (S or AL)-103

GLCS4000-15 (S or AL)-103GLCSL4000-15 (S or AL)-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

12’-6”12’-6”12’-6”

30 3/430 3/430 3/4

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

545454

25 7/825 7/825 7/8

54 @ 5,730#12 @ 6,143#10 @ 6,385#

124’ GLCSLX4000-15 (S or AL)-124 Steel 30’ 3 3/8 15 1/16 12’-6” 30 3/4 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 10 @ 6,652#

20’

23’ GLC4000-20 (S or AL)-23GLCS4000-20 (S or AL)-23

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

17’-6”17’-6”

2626

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

99

25 7/825 7/8

14 @ 5,781#4 @ 6,195#

28’ GLCSL4000-20 (S or AL)-28 Steel 25’ 3 3/8 15 1/16 17’-6” 26 31 7/16 34 1/2 21 3/8 3 1/2 20 13 25 7/8 4 @ 6,437#

33’ GLC4000-20 (S or AL)-33GLCS4000-20 (S or AL)-33

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

17’-6”17’-6”

2626

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1313

25 7/825 7/8

20 @ 5,781#6 @ 6,195#

34’ GLCSLX4000-20 (S or AL)-34 Steel 30’ 3 3/8 15 1/16 17’-6” 26 32 7/16 35 1/2 21 3/8 3 1/2 22 13 25 7/8 4 @ 6,704#

43’ GLC4000-20 (S or AL)-43GLCS4000-20 (S or AL)-43

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

17’-6”17’-6”

2626

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1919

25 7/825 7/8

24 @ 5,781#6 @ 6,195#

53’GLC4000-20 (S or AL)-53

GLCS4000-20 (S or AL)-53GLCSL4000-20 (S or AL)-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

17’-6”17’-6”17’-6”

262626

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

191919

25 7/825 7/825 7/8

30 @ 5,781#8 @ 6,195#6 @ 6,437#

63’ GLC4000-20 (S or AL)-63GLCS4000-20 (S or AL)-63

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

17’-6”17’-6”

2626

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

2626

25 7/825 7/8

34 @ 5,781#8 @ 6,195#

64’ GLCSLX4000-20 (S or AL)-64 Steel 30’ 3 3/8 15 1/16 17’-6” 34 1/8 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 6 @ 6,704#78’ GLCSL4000-20 (S or AL)-78 Steel 25’ 3 3/8 15 1/16 17’-6” 34 1/8 31 7/16 34 1/2 21 3/8 3 1/2 20 54 25 7/8 8 @ 6,437#

83’ GLC4000-20 (S or AL)-83GLCS4000-20 (S or AL)-83

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

17’-6”17’-6”

34 1/834 1/8

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

5454

25 7/825 7/8

44 @ 5,781#10 @ 6,195#

94’ GLCSLX4000-20 (S or AL)-94 Steel 30’ 3 3/8 15 1/16 17’-6” 34 1/8 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 8 @ 6,704#

103’GLC4000-20 (S or AL)-103

GLCS4000-20 (S or AL)-103GLCSL4000-20 (S or AL)-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

17’-6”17’-6”17’-6”

34 1/834 1/834 1/8

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

545454

25 7/825 7/825 7/8

54 @ 5,781#12 @ 6,195#10 @ 6,437#

124’ GLCSLX4000-20 (S or AL)-124 Steel 30’ 3 3/8 15 1/16 17’-6” 34 1/8 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 10 @ 6,704#

23’

23’ GLC4000-23 (S or AL)-23GLCS4000-23 (S or AL)-23

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

20’-6”20’-6”

2828

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

99

25 7/825 7/8

14 @ 5,812#4 @ 6,226#

28’ GLCSL4000-23 (S or AL)-28 Steel 25’ 3 3/8 15 1/16 20’-6” 28 31 7/16 34 1/2 21 3/8 3 1/2 20 13 25 7/8 4 @ 6,468#

33’ GLC4000-23 (S or AL)-33GLCS4000-23 (S or AL)-33

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

20’-6”20’-6”

2828

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1313

25 7/825 7/8

20 @ 5,812#6 @ 6,226#

34’ GLCSLX4000-23 (S or AL)-34 Steel 30’ 3 3/8 15 1/16 20’-6” 28 32 7/16 35 1/2 21 3/8 3 1/2 22 13 25 7/8 4 @ 6,735#

43’ GLC4000-23 (S or AL)-43GLCS4000-23 (S or AL)-43

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

20’-6”20’-6”

2828

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

1919

25 7/825 7/8

24 @ 5,812#6 @ 6,226#

53’GLC4000-23 (S or AL)-53

GLCS4000-23 (S or AL)-53GLCSL4000-23 (S or AL)-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

20’-6”20’-6”20’-6”

282828

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

191919

25 7/825 7/825 7/8

30 @ 5,812#8 @ 6,226#6 @ 6,468#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

54

4000# CAPACITYC

EILING

MO

UN

TED W

OR

KSTATIO

N B

RID

GE C

RA

NES

CEILING MOUNTED WORK STATION BRIDGE CRANESBRIDGE LENGTH

(L)

RUNWAY LENGTH MODEL NUMBER TRACK

MATL.

BRIDGE RUNWAYMAX

L1T1in

L3in

L4

L6in

H3in

H3Ain

H4in

H2in

H1in

L7in

L8in

HANGERS(See Note)*

23’

63’ GLC4000-23 (S or AL)-63GLCS4000-23 (S or AL)-63

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

20’-6”20’-6”

2828

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

2626

25 7/825 7/8

34 @ 5,812#8 @ 6,226#

64’ GLCSLX4000-23 (S or AL)-64 Steel 30’ 3 3/8 15 1/16 20’-6” 37 7/16 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 6 @ 6,735#78’ GLCSL4000-23 (S or AL)-78 Steel 25’ 3 3/8 15 1/16 20’-6” 37 7/16 31 7/16 34 1/2 21 3/8 3 1/2 20 54 25 7/8 8 @ 6,468#

83’ GLC4000-23 (S or AL)-83GLCS4000-23 (S or AL)-83

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

20’-6”20’-6”

37 7/1637 7/16

11 7/1629 7/16

14 1/232 1/2

21 3/821 3/8

3 1/23 1/2

-18

5454

25 7/825 7/8

44 @ 5,812#10 @ 6,226#

94’ GLCSLX-23 (S or AL)-94 Steel 30’ 3 3/8 15 1/16 20’-6” 37 7/16 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 8 @ 6,735#

103’GLC4000-23 (S or AL)-103

GLCS4000-23 (S or AL)-103GLCSL4000-23 (S or AL)-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

20’-6”20’-6”20’-6”

37 7/1637 7/1637 7/16

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

21 3/821 3/821 3/8

3 1/23 1/23 1/2

-1820

545454

25 7/825 7/825 7/8

54 @ 5,812#12 @ 6,226#10 @ 6,468#

124’ GLCSLX4000-23 (S or AL)-124 Steel 30’ 3 3/8 15 1/16 20’-6” 37 7/16 32 7/16 35 1/2 21 3/8 3 1/2 22 54 25 7/8 10 @ 6,735#

28’

23’ GLC4000-28 (S or AL)-23GLCS4000-28 (S or AL)-23

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

25’-0”25’-0”

3232

11 7/1629 7/16

14 1/232 1/2

23 3/823 3/8

3 1/23 1/2

-18

99

25 7/825 7/8

14 @ 5,928#4 @ 6,342#

28’ GLCSL4000-28 (S or AL)-28 Steel 25’ 3 3/8 15 1/16 25’-0” 32 31 7/16 34 1/2 23 3/8 3 1/2 20 13 25 7/8 4 @ 6,583#

33’ GLC4000-28 (S or AL)-33GLCS4000-28 (S or AL)-33

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

25’-0”25’-0”

3232

11 7/1629 7/16

14 1/232 1/2

23 3/823 3/8

3 1/23 1/2

-18

1313

25 7/825 7/8

20 @ 5,928#6 @ 6,342#

34’ GLCSLX4000-28 (S or AL)-34 Steel 30’ 3 3/8 15 1/16 25’-0” 32 32 7/16 35 1/2 23 3/8 3 1/2 22 13 25 7/8 4 @ 6,851#

43’ GLC4000-28 (S or AL)-43GLCS4000-28 (S or AL)-43

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

25’-0”25’-0”

3232

11 7/1629 7/16

14 1/232 1/2

23 3/823 3/8

3 1/23 1/2

-18

1919

25 7/825 7/8

24 @ 5,928#6 @ 6,342#

53’GLC4000-28 (S or AL)-53

GLCS4000-28 (S or AL)-53GLCSL4000-28 (S or AL)-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

25’-0”25’-0”25’-0”

323232

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

23 3/823 3/823 3/8

3 1/23 1/23 1/2

-1820

191919

25 7/825 7/825 7/8

30 @ 5,928#8 @ 6,342#6 @ 6,583#

63’ GLC4000-28 (S or AL)-63GLCS4000-28 (S or AL)-63

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

25’-0”25’-0”

3232

11 7/1629 7/16

14 1/232 1/2

23 3/823 3/8

3 1/23 1/2

-18

2626

25 7/825 7/8

34 @ 5,928#8 @ 6,342#

64’ GLCSLX4000-28 (S or AL)-64 Steel 30’ 3 3/8 15 1/16 25’-0” 44 3/16 32 7/16 35 1/2 23 3/8 3 1/2 22 54 25 7/8 6 @ 6,851#78’ GLCSL4000-28 (S or AL)-78 Steel 25’ 3 3/8 15 1/16 25’-0” 44 3/16 31 7/16 34 1/2 23 3/8 3 1/2 20 54 25 7/8 8 @ 6,583#

83’ GLC4000-28 (S or AL)-83GLCS4000-28 (S or AL)-83

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

25’-0”25’-0”

44 3/1644 3/16

11 7/1629 7/16

14 1/232 1/2

23 3/823 3/8

3 1/23 1/2

-18

5454

25 7/825 7/8

44 @ 5,928#10 @ 6,342#

94’ GLCSLX4000-28 (S or AL)-94 Steel 30’ 3 3/8 15 1/16 25’-0” 44 3/16 32 7/16 35 1/2 23 3/8 3 1/2 22 54 25 7/8 8 @ 6,851#

103’GLC4000-28 (S or AL)-103

GLCS4000-28 (S or AL)-103GLCSL4000-28 (S or AL)-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

25’-0”25’-0”25’-0”

44 3/1644 3/1644 3/16

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

23 3/823 3/823 3/8

3 1/23 1/23 1/2

-1820

545454

25 7/825 7/825 7/8

54 @ 5,928#12 @ 6,342#10 @ 6,583#

124’ GLCSLX4000-28 (S or AL)-124 Steel 30’ 3 3/8 15 1/16 25’-0” 44 3/16 32 7/16 35 1/2 23 3/8 3 1/2 22 54 25 7/8 10 @ 6,851#

34’

28’ GLCSL4000-34 (S or AL)-28 Steel 25’ 3 3/8 15 1/16 30’-0” 36 31 7/16 34 1/2 25 3/8 3 1/2 20 13 25 7/8 4 @ 6,717#

33’ GLC4000-34 (S or AL)-33GLCS4000-34 (S or AL)-33

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

30’-0”30’-0”

3636

11 7/1629 7/16

14 1/232 1/2

25 3/825 3/8

3 1/23 1/2

-18

1313

25 7/825 7/8

20 @ 6,062#6 @ 6,475#

34’ GLCSLX4000-34 (S or AL)-34 Steel 30’ 3 3/8 15 1/16 30’-0” 36 32 7/16 35 1/2 25 3/8 3 1/2 22 13 25 7/8 4 @ 6,985#

43’ GLC4000-34 (S or AL)-43GLCS4000-34 (S or AL)-43

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

30’-0”30’-0”

3636

11 7/1629 7/16

14 1/232 1/2

25 3/825 3/8

3 1/23 1/2

-18

1919

25 7/825 7/8

24 @ 6,062#6 @ 6,475#

53’GLC4000-34 (S or AL)-53

GLCS4000-34 (S or AL)-53GLCSL4000-34 (S or AL)-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

30’-0”30’-0”30’-0”

363636

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

25 3/825 3/825 3/8

3 1/23 1/23 1/2

-1820

191919

25 7/825 7/825 7/8

30 @ 6,062#8 @ 6,475#6 @ 6,717#

63’ GLC4000-34 (S or AL)-63GLCS4000-34 (S or AL)-63

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

30’-0”30’-0”

3636

11 7/1629 7/16

14 1/232 1/2

25 3/825 3/8

3 1/23 1/2

-18

2626

25 7/825 7/8

34 @ 6,062#8 @ 6,475#

64’ GLCSLX4000-34 (S or AL)-64 Steel 30’ 3 3/8 15 1/16 30’-0” 50 7/8 32 7/16 35 1/2 25 3/8 3 1/2 22 54 25 7/8 6 @ 6,985#78’ GLCSL4000-34 (S or AL)-78 Steel 25’ 3 3/8 15 1/16 30’-0” 50 7/8 31 7/16 34 1/2 25 3/8 3 1/2 20 54 25 7/8 8 @ 6,717#

83’ GLC4000-34 (S or AL)-83GLCS4000-34 (S or AL)-83

SteelSteel

4’20’

3 3/83 3/8

15 1/1615 1/16

30’-0”30’-0”

50 7/850 7/8

11 7/1629 7/16

14 1/232 1/2

25 3/825 3/8

3 1/23 1/2

-18

5454

25 7/825 7/8

44 @ 6,062#10 @ 6,475#

94’ GLCSLX4000-34 (S or AL)-94 Steel 30’ 3 3/8 15 1/16 30’-0” 50 7/8 32 7/16 35 1/2 25 3/8 3 1/2 22 54 25 7/8 8 @ 6,985#

103’GLC4000-34 (S or AL)-103

GLCS4000-34 (S or AL)-103GLCSL4000-34 (S or AL)-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

15 1/1615 1/1615 1/16

30’-0”30’-0”30’-0”

50 7/850 7/850 7/8

11 7/1629 7/1631 7/16

14 1/232 1/234 1/2

25 3/825 3/825 3/8

3 1/23 1/23 1/2

-1820

545454

25 7/825 7/825 7/8

54 @ 6,062#12 @ 6,475#10 @ 6,717#

124’ GLCSLX4000-34 (S or AL)-124 Steel 30’ 3 3/8 15 1/16 30’-0” 50 7/8 32 7/16 35 1/2 25 3/8 3 1/2 22 54 25 7/8 10 @ 6,985#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Ceiling Mounted Work Sta on Bridge Crane Kits include: bridge, runways, hoist trolley, end trucks, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel runway lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEILING MOUNTED WORK STATION MONORAILISOMETRIC VIEW

55

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)

Gorbel® Monorails include: monorails, hoist trolley, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel monorail lengths greater than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N M

ON

OR

AIL

L1

L7

MONORAIL LENGTH

L1

L1

L1

L1

L7

GLMSTEEL MONORAIL

ALMALUMINUM MONORAIL

L1

MONORAIL LENGTH

GLMS(SL,SLX)STEEL MONORAIL

L1

L1

L7

L1

MONORAIL LENGTH

CEILIN

G M

OU

NTED

WO

RK

STATION

MO

NO

RA

ILSCEILING MOUNTED WORK STATION

MONORAIL

56

Model Number:

Capacity: pounds

Bridge Length (L): (OAL)

Runway Length: (OAL)L1: Are the number of support assemblies provided suffi cient?(See “HANGERS” column on dimensional chart pages)

Type of hanger required: Standard hanger with up to 20 inch drop. Support beam fl ange width ___________ inches Flush mounted, parallel Support beam fl ange width ___________ inches Flush mounted, perpendicular Support beam fl ange width ___________ inches Special hangersNote: Sway bracing is required on all systems except fl ush mounted systems. Sway bracing kits are available but are not included in the crane kit.

C: inches (hoist by others)Gorbel® Monorails inlcude: monorails, hoist trolley, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel monorail lengths great-er than 63 feet and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Addi onal hanger points or longer drops, in excess of 20 inches, can be provided at an addi onal cost (hoist and sway bracing by others). Sway bracing kits are available but are not included in the crane kit.

Dimension and design details subject to change without no ce.

H2

L3

12” L1 L1 L1MONORAIL LENGTH

8” MAX

L1 L1

SPLICE JOINT

HANGER

L1 12”

L3

L7

HOIST TROLLEY

GLM STEEL MONORAIL

H2

L3

L1

RUNWAY LENGTH

48”MAXSPLICE JOINT

AND PLATE

HANGERL1

L3

L7

GLMS, GLMSL, GLMSLXSTEEL MONORAIL

H1

18” 18”

CT1

HOIST TROLLEY

CT1

H2

L3

18”MONORAIL LENGTH

30” MAX

L1 L1

SPLICE JOINT

HANGER18”

L3

L7

HOIST TROLLEY

GLM STEEL MONORAIL

CT1

57

250#-500# CAPACITYCEILING MOUNTED WORK STATION MONORAILS

250#

CAP

ACIT

Y

MONORAIL LENGTH

MONORAIL LENGTH

TRACK MATL.

MAXL1

T1in

H1in

H2in

L3in

L7in

HANGERS(See Note)*

11’-6”GLM250-11.5

GLMS250-11.5ALM250-11.5

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

999

3 @ 366#2 @ 449#2 @ 430#

23’GLM250-23

GLMS250-23ALM250-23

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

99

14

5 @ 366#2 @ 449#2 @ 430#

28’ GLMSL250-28 Steel 25’ 1 1/2 11 1 3/4 5 1/16 9 2 @ 561#

33’GLM250-33

GLMS250-33ALM250-33

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

99

20

7 @ 366#3 @ 449#3 @ 430#

43’GLM250-43

GLMS250-43ALM250-43

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

131327

8 @ 366#3 @ 449#3 @ 430#

53’

GLM250-53GLMS250-53

ALM250-53GLMSL250-53

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

-9-

11

1 3/41 3/4

81 3/4

5 1/165 1/167 3/165 1/16

13133013

11 @ 366#4 @ 449#4 @ 430#3 @ 561#

63’GLM250-63

GLMS250-63ALM250-63

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

191937

12 @ 366#4 @ 449#4 @ 430#

78’ GLMSL250-78 Steel 25’ 1 1/2 11 1 3/4 5 1/16 54 4 @ 561#

83’GLM250-83

GLMS250-83ALM250-83

SteelSteelAlum

6’20’20’

1 1/21 1/2

2 11/16

-9-

1 3/41 3/4

8

5 1/165 1/167 3/16

545447

16 @ 366#5 @ 449#5 @ 430#

103’

GLM250-103GLMS250-103

ALM250-103GLMSL250-103

SteelSteelAlumSteel

6’20’20’25’

1 1/21 1/2

2 11/161 1/2

-9-

11

1 3/41 3/4

81 3/4

5 1/165 1/167 3/165 1/16

54545354

20 @ 366#6 @ 449#6 @ 430#5 @ 561#

500#

CAP

ACIT

Y

MONORAIL LENGTH MONORAIL LENGTH TRACK

MATL.MAX

L1T1in

H1in

H2

L3in

L7in

HANGERS(See Note)*

11’-6”GLM500-11.5

GLMS500-11.5ALM500-11.5

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

999

3 @ 725#2 @ 849#2 @ 794#

23’GLM500-23

GLMS500-23ALM500-23

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

99

14

5 @ 725#2 @ 849#2 @ 794#

28’ GLMSL500-28 Steel 25’ 2 13/16 12 3/8 2 3/8 7 1/8 9 2 @ 968#

33’GLM500-33

GLMS500-33ALM500-33

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

99

20

7 @ 725#3 @ 849#3 @ 794#

34’ GLMSLX500-34 Steel 30’ 2 13/16 14 3/8 2 3/8 7 1/8 9 2 @ 1,031#

43’GLM500-43

GLMS500-43ALM500-43

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

131327

8 @ 725#3 @ 849#3 @ 794#

53’

GLM500-53GLMS500-53

ALM500-53GLMSL500-53

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

-10-

12 3/8

2 3/82 3/8

102 3/8

7 1/87 1/8

7 3/167 1/8

13133013

11 @ 725#4 @ 849#4 @ 794#3 @ 968#

63’GLM500-63

GLMS500-63ALM500-63

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

191937

12 @ 725#4 @ 849#4 @ 794#

64’ GLMSLX500-64 Steel 30’ 2 13/16 14 3/8 2 3/8 7 1/8 46 3 @ 1,031@78’ GLMSL500-78 Steel 25’ 2 13/16 12 3/8 2 3/8 7 1/8 54 4 @ 968#

83’GLM500-83

GLMS500-83ALM500-83

SteelSteelAlum

6’20’20’

2 13/162 13/162 11/16

-10-

2 3/82 3/8

10

7 1/87 1/8

7 3/16

545447

16 @ 725#5 @ 849#5 @ 794#

94’ GLMSLX500-94 Steel 30’ 2 13/16 14 3/8 2 3/8 7 1/8 54 4 @ 1,031@

103’

GLM500-103GLMS500-103

ALM500-103GLMSL500-103

SteelSteelAlumSteel

6’20’20’25’

2 13/162 13/162 11/162 13/16

-10-

12 3/8

2 3/82 3/8

102 3/8

7 1/87 1/8

7 3/167 1/8

54545354

20 @ 725#6 @ 849#6 @ 794#5 @ 968#

124’ GLMSLX500-124 Steel 30’ 2 13/16 14 3/8 2 3/8 7 1/8 54 5 @ 1,031#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Monorail Kits include: monorail track, hoist trolley, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel monorail lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N M

ON

OR

AIL

CEILIN

G M

OU

NTED

WO

RK

STATION

MO

NO

RA

ILS

58

1000#-2000# CAPACITYCEILING MOUNTED WORK STATION MONORAILS

1000

# CA

PACI

TY

MONORAIL LENGTH MONORAIL LENGTH TRACK

MATL.MAX

L1T1in

H1in

H2

L3in

L7in

HANGERS(See Note)*

11’-6”GLM1000-11.5

GLMS1000-11.5ALM1000-11.5

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

99

13

3 @ 1,438#2 @ 1,645#2 @ 1,569#

23’GLM1000-23

GLMS1000-23ALM1000-23

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

99

28

5 @ 1,438#2 @ 1,645#2 @ 1,569#

28’ GLMSL1000-28 Steel 25’ 3 1/8 13 15/16 3 1/16 7 7/8 13 2 @ 1,752#

33’GLM1000-33

GLMS1000-33ALM1000-33

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

131339

7 @ 1,438#3 @ 1,645#3 @ 1,569#

34’ GLMSLX1000-34 Steel 30’ 3 1/8 17 1/16 3 1/16 7 7/8 13 2 @ 1,925#

43’GLM1000-43

GLMS1000-43ALM1000-43

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

191949

8 @ 1,438#3 @ 1,645#3 @ 1,569#

53’

GLM1000-53GLMS1000-53

ALM1000-53GLMSL1000-53

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

-11 1/16

-13 15/16

3 1/163 1/16

113 1/16

7 7/87 7/8

7 13/167 7/8

19195319

11 @ 1,438#4 @ 1,645#4 @ 1,569#3 @ 1,752#

63’GLM1000-63

GLMS1000-63ALM1000-63

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

262653

12 @ 1,438#4 @ 1,645#4 @ 1,569#

64’ GLMSLX1000-64 Steel 30’ 3 1/8 17 1/16 3 1/16 7 7/8 54 3 @ 1,925#78’ GLMSL1000-78 Steel 25’ 3 1/8 13 15/16 3 1/16 7 7/8 54 4 @ 1,752#

83’GLM1000-83

GLMS1000-83ALM1000-83

SteelSteelAlum

6’20’20’

3 1/83 1/82 5/8

-11 1/16

-

3 1/163 1/16

11

7 7/87 7/8

7 13/16

545453

16 @ 1,438#5 @ 1,645#5 @ 1,569#

94’ GLMSLX1000-94 Steel 30’ 3 1/8 7 1/16 3 1/16 7 7/8 54 4 @ 1,925#

103’

GLM1000-103GLMS1000-103

ALM1000-103GLMSL1000-103

SteelSteelAlumSteel

6’20’20’25’

3 1/83 1/82 5/83 1/8

-11 1/16

-13 15/16

3 1/163 1/16

113 1/16

7 7/87 7/8

7 13/167 7/8

54545354

20 @ 1,438#6 @ 1,645#6 @ 1,569#5 @ 1,752#

124’ GLMSLX1000-124 Steel 30’ 3 1/8 7 1/16 3 1/16 7 7/8 54 5 @ 1,925#

2000

# CA

PACI

TY

MONORAIL LENGTH MONORAIL LENGTH TRACK

MATL.MAX

L1T1in

H1in

H2

L3in

L7in

HANGERS(See Note)*

11’-6”GLM2000-11.5

GLMS2000-11.5ALM2000-11.5

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

99

13

3 @ 2,855#2 @ 3,138#2 @ 3,004#

23’GLM2000-23

GLMS2000-23ALM2000-23

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

99

26

5 @ 2,855#2 @ 3,138#2 @ 3,004#

28’ GLMSL2000-28 Steel 25’ 2 7/8 15 3/8 3 1/2 8 1/16 13 2 @ 3,285#

33’GLM2000-33

GLMS2000-33ALM2000-33

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

131339

7 @ 2,855#3 @ 3,138#3 @ 3,004#

34’ GLMSLX2000-34 Steel 30’ 2 7/8 18 3 1/2 8 1/16 13 2 @ 3,404#

43’GLM2000-43

GLMS2000-43ALM2000-43

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

191949

8 @ 2,855#3 @ 3,138#3 @ 3,004#

53’

GLM2000-53GLMS2000-53

ALM2000-53GLMSL2000-53

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

-12-

15 3/8

3 1/23 1/2

13 1/43 1/2

8 1/168 1/16

88 1/16

19195319

11 @ 2,855#4 @ 3,138#4 @ 3,004#3 @ 3,285#

63’GLM2000-63

GLMS2000-63ALM2000-63

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

262653

12 @ 2,855#4 @ 3,138#4 @ 3,004#

64’ GLMSLX2000-64 Steel 30’ 2 7/8 18 3 1/2 8 1/16 54 3 @ 3,404#78’ GLMSL2000-78 Steel 25’ 2 7/8 15 3/8 3 1/2 8 1/16 54 4 @ 3,285#

83’GLM2000-83

GLMS2000-83ALM2000-83

SteelSteelAlum

6’20’20’

2 7/82 7/82 3/8

-12-

3 1/23 1/2

13 1/4

8 1/168 1/16

8

545453

16 @ 2,855#5 @ 3,138#5 @ 3,004#

94’ GLMSLX2000-94 Steel 30’ 2 7/8 18 3 1/2 8 1/16 54 4 @ 3,404#

103’

GLM2000-103GLMS2000-103

ALM2000-103GLMSL2000-103

SteelSteelAlumSteel

6’20’20’25’

2 7/82 7/82 3/82 7/8

-12-

15 3/8

3 1/23 1/2

13 1/43 1/2

8 1/168 1/16

88 1/16

54545354

20 @ 2,855#6 @ 3,138#6 @ 3,004#5 @ 3,285#

124’ GLMSLX2000-124 Steel 30’ 2 7/8 18 3 1/2 8 1/16 54 5 @ 3,404#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Monorail Kits include: monorail track, hoist trolley, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel monorail lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

59

4000# CAPACITYCEILING MOUNTED WORK STATION MONORAILS

4000

# CA

PACI

TY

MONORAIL LENGTH MONORAIL LENGTH TRACK

MATL.MAX

L1T1in

H1in

H2

L3in

L7in

HANGERS(See Note)*

23’ GLM500-23GLMS500-23

SteelSteel

4’20’

3 3/83 3/8

-18

3 1/23 1/2

15 1/1615 1/16

99

7 @ 5,637#2 @ 6,014#

28’ GLMSL500-28 Steel 25’ 3 3/8 20 3 1/2 15 1/16 13 2 @ 6,256#

33’ GLM500-33GLMS500-33

SteelSteel

4’20’

3 3/83 3/8

-18

3 1/23 1/2

15 1/1615 1/16

1313

10 @ 5,637#3 @ 6,014#

34’ GLMSLX500-34 Steel 30’ 3 3/8 22 3 1/2 15 1/16 13 2 @ 6,523#

43’ GLM500-43GLMS500-43

SteelSteel

4’20’

3 3/83 3/8

-18

3 1/23 1/2

15 1/1615 1/16

1919

12 @ 5,637#3 @ 6,014#

53’GLM500-53

GLMS500-53GLMSL500-53

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

-1820

3 1/23 1/23 1/2

15 1/1615 1/1615 1/16

191919

15 @ 5,637#4 @ 6,014#3 @ 6,523#

63’ GLM500-63GLMS500-63

SteelSteel

4’20’

3 3/83 3/8

-18

3 1/23 1/2

15 1/1615 1/16

2626

17 @ 5,637#4 @ 6,014#

64’ GLMSLX500-64 Steel 30’ 3 3/8 22 3 1/2 15 1/16 54 3 @ 6,523#78’ GLMSL500-78 Steel 25’ 3 3/8 20 3 1/2 15 1/16 54 4 @ 6,256#

83’ GLM500-83GLMS500-83

SteelSteel

4’20’

3 3/83 3/8

-18

3 1/23 1/2

15 1/1615 1/16

5454

22 @ 5,637#5 @ 6,014#

94’ GLMSLX500-94 Steel 30’ 3 3/8 22 3 1/2 15 1/16 54 4 @ 6,523#

103’GLM500-103

GLMS500-103GLMSL500-103

SteelSteelSteel

4’20’25’

3 3/83 3/83 3/8

-1820

3 1/23 1/23 1/2

15 1/1615 1/1615 1/16

545454

27 @ 5,637#6 @ 6,014#5 @ 6,256#

124’ GLMSLX500-124 Steel 30’ 3 3/8 22 3 1/2 15 1/16 54 5 @ 6,523#

*This column provides the total number of support hangers with the corresponding ver cal load applied by each support hanger (in pounds) based on the “L1” dimensions shown. Up to a 20” hanger drop will be provided by Gorbel. Addi onal hanger points or longer drops can be provided at an addi onal charge.

Gorbel® Monorail Kits include: monorail track, hoist trolley, end stops, fl at wire festooning, festoon gliders (festoon trolleys on steel monorail lengths greater than 63’ and all aluminum systems), festoon stack-up sec on, splice joints and hanger brackets. Sway bracing is required on all systems except fl ush mounted systems (by others). Sway bracing kits are available but not included in the crane kit. Hoist provided by others.

Dimensions are for reference only and are subject to change without no ce.

CEI

LIN

G M

OU

NTE

D W

OR

KST

ATIO

N M

ON

OR

AIL