workshop schedule ateeq al-dosari (king abdulaziz city for science and technology, saudi arabia)...
TRANSCRIPT
Workshop Schedule
DAY 1: 5th December 2012 (Wednesday)
Time Activity/Programme
0800 – 0900 Registration
0900 – 0915 Welcoming remarks and explanation about the running of the conference
0915 – 1030 Workshop 1
Title: Synthesis of Nanomaterials
Speaker: Prof. Shahidan Radiman (Universiti Kebangsaan Malaysia)
1030 – 1115 Photo session
Refreshments
1115 – 1230 Workshop 2
Title: Use of Carbon Nanotubes in Novel Solar Cells
Speaker: Prof. Joe Shapter (Flinders University, South Australia)
1230 – 1400 Lunch
1400 – 1515 Workshop 3
Title: Green Aspects of Metal Nanoparticles – Modified Electrodes
Speaker: Prof. Munetaka Oyama (Kyoto University, Japan)
1515 – 1630 Workshop 4
Title: Solvothermal Synthesis of Optical Ceramic-Polymer Nanocomposites
Speaker: Dr. Tan Mei Chee (University of Technology and Design, Singapore)
1630 – 1700 Refreshments
2000 – 2230 IWCN 2012 Opening Ceremony and Conference Dinner
Venue: Dewan Tun Abdullah Mohd Salleh (DTAMS), UKM
**Note: ISESCO Expert Panels Meeting will be held from 2.30 pm – 4.30 pm.
2 | P a g e
DAY 2: 6th December 2012 (Thursday)
Time Programme
0830 Plenary 1
Topic: Nanomaterials in Energy Production and Storage
Speaker: Prof. Arshad Saleem Bhatti (COMSATS Institute of Information Technology, Pakistan)
0930 Keynote 1
Topic: MEMS And Lab On Chip: Top Down Nanotechnology Interfacing Macro to Nano World
Speaker: Prof. Burhanuddin Yeop Majlis (Universiti Kebangsaan Malaysia)
1015 DAY 2: Poster Session I
1045 Refreshments
Session Session A1
Advanced Materials (Synthesis)
Session B1
Device & Sensor
Session C1
Advanced Materials
1100 IS-A1-1
High Performance Nanocomposite Transparent Electrode
Prof. David Lewis
(Flinders University, South Australia)
IS-B1-1
Influence of Organic Salt Doping Concentration on the Performance of Bulk Heterojunction Organic Solar Cell based on MEHPPV:PCBM Blend Film
Dr. Yap Chi Chin
(Universiti Kebangsaan Malaysia)
IS-C1-1
Effect of Heat Treatment of HoBa2Cu3O7-δ Ceramics Superconductor Synthesized from Nano-Coprecipitated Powders
Prof. Imad (Moh'd Khair) Rashid Hamadneh
(University of Jordan)
1120 IS-A1-2
Fluorescence Urea Biosensor From ZnS Quantum Dots (QDs) Entrapped In An Acrylic Membrane
Prof. Lee Yoke Heng
(Universiti Kebangsaan Malaysia)
IS-B1-2
Spectroscopy And Nonlinear Optical Behavior In Lead Sulfide Quantum Dots Dispersed In Toluene
Dr. Khalil Ebrahim Jasim
(University of Bahrain)
O-C1-1
Physical and Luminescence Studies of Europium Doped Tellurite Nano-Glass
Prof. Rahim Md. Sahar
(Universiti Teknologi Malaysia)
1140 O-A1-1
Synthesis and optical properties of Cobalt doped indium oxide nanocrystal thin film
Hussein Baqiah
(Universiti Kebangsaan Malaysia)
O-B1-1
Effect of ZnO Layer Thickness on the Photovoltaic Performance of Laminated Solar Cells
Anirudh Sharma
(Flinders University, South Australia)
O-C1-2
Dynamic Mechanical and Dielectric Properties of Modified Surface Chitosan/Natural Rubber Latex Blends
Dr. Wirach Taweepreda
(Prince of Songkla University, Thailand)
3 | P a g e
1155 O-A1-2
Quantum Dots Sensitized Solar Cell Photoanodes
Dr. Khatijah Aisha Yaacob
(Universiti Sains Malaysia)
O-B1-2
Enhancement of Poly (9,9'-di-n-octylfluorenyl-2. 7-diyl) Optoepeltronic properties in Novel Conjugated Polymer/Laser Dye Hybrid OLEDs
Bandar Ali AbdulQader Al-Asbahi
(Universiti Kebangsaan Malaysia)
O-C1-3
Annealing Effects on the Physical Properties of Tb1.5Y1.5Fe5O12 Films Nanoparticles Prepared by Sol-Gel Method
Dr. Ftema W. Aldbea
(Universiti Kebangsaan Malaysia)
1210 O-A1-3
Thermal Stability Studies of Copper Tin Selenide (Cu2SnSe3) Semiconductor Nanoparticles Formed by Chemical Precipitation Technique
Dr. Josephine Liew Ying Chyi
(Universiti Putra Malaysia)
O-B1-3
Submicron Wire Fabrication on Silicon Substrate based on Atomic Force Microscopy Technique
Asmah Mat Taib
(Universiti Sains Malaysia)
O-C1-4
Sonochemical Synthesis of Silica Coated Super Paramagnetic Iron Oxide Nanoparticles
Bashiru Kayode Sodipo
(Universiti Sains Malaysia)
1225
O-A1-4
Growth of Gold Nanoplates Onto Solid Substrates by Seed-Mediated Growth Method
Dr. Iwantono
(University of Riau, Indonesia)
O-B1-4
Electrochemical Behavior ofSupercapacitor Electrodes Made fromBinderless Activated Carbon Monoliths of Biomass Carbon and Carbon Nanotubes
Besek Nurdiana
(Universiti Kebangsaan Malaysia)
O-C1-5
Field and Dual Magnetic Suspeptibility Proxies for Heavy Metal Poullution Assesment in the Urban Soil of Al-Karak City, South Jordan
Mahdi Salem Q. Lataifeh
(Mutah University, Jordan)
1240 O-A1-5
Biomimetric Synthesis of Silver Nanoparticles Using Aqueous Extract of the Flower of Nelumbo Nucifera
Dr. S. Arokiyaraj
(Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College, India)
O-B1-5
Silver Nanoparticles (AgNPs) - Loaded Chitosan - Polyactic Acid (PLA) Based Film : Fabrication and Antimicrobial Properties
Aznizan Shaari
(Universiti Malaysia Pahang)
O-C1-6
Analysis of Nanoparticle Additive Couple Stress Fluids in Three-layered Journal Bearing
Dr. T V V L N Rao
(Universiti Teknologi PETRONAS)
1300 Lunch / Solat
Session Session A2 Advanced Materials (Synthesis)
Session B2 Advanced Materials (Thin Films)
Session C2 Advanced Materials (Nanocomposites)
Session D2 Biomedical, Bioenergy, Environment
1415 IS-A2-1 Graphene : Synthesis and Its Application as a Buffer Layer Assoc. Prof. Abdul Manaf Hashim (Universiti Teknologi Malaysia)
IS-B2-1 High Quality TCO Films For Solar Cell Application Dr. Fawzy A. Mahmoud (National Research Centre, Egypt)
IS-C2-1 Microwave Absorbing Epoxy/Amphoteric Surfactant-Doped Polypyrrole Nanocomposites prepared via Colloidal Dispersion Assoc. Prof. Rusli Daik (Universiti Kebangsaan Malaysia)
IS-D2-1 Nanocatalysts for Bioenergy Applications Prof. Taufiq Yap Yun Hin (Universiti Putra Malaysia)
4 | P a g e
1435 IS-A2-2
Graphene Inorganic Nanocomposites: Fabrications And Its Applications
Dr. Huang Nay Ming
(Universiti Malaya)
IS-B2-2
Nanoscale Patterning by AFM Lithography and Its Application on the Fabrication of Silicon Nanowire Devices
Assoc. Prof. Sabar D. Hutagalung
(Universiti Sains Malaysia)
IS-C2-2
Grafted Polymer with Nano Materials (CNT, C60 and Activated Carbon) Using in Conductors and Semiconductors With Different Applications in Working Electrodes, Sensors, Solar Cell and Polymer Transistors
Dr. Muhammed Mizher Radhi
(College of Medical and Health Technology, Iraq)
IS-D2-2
Design and Synthesis of Inorganic-Based Nanostrucs For Drug and DNA Delivery
Prof. Mohd Zobir Hussein
(Universiti Putra Malaysia)
1455 O-A2-1
The Essential Role of Catalyst in the VLS Growth of ZnS Nanostructures
Shania Rehman
(COMSATS Institute of Information Technology, Pakistan)
O-B2-1
Effect of Pressure and Graphene Buffer Layer for the Heteroepitaxial Growth of Silicon Carbide
Budi Astuti
(Universiti Teknologi Malaysia)
O-C2-1
Preparation and Characterization of Polyaniline/Montmorillonite Nanocomposites Via In-situ Emulsion Polymerization Process
Dr. Mahmoud Ahmed Abd El-Ghaffar
(National Research Centre, Egypt)
O-D2-1
Genotoxicity Evaluation of Locally Produced Dental Restoration Nanocomposite (KelFil) using Chromosome Aberration Test and Comet Assay
Marahaini Musa
(Universiti Sains Malaysia)
1510 O-A2-2
Synthesis, Structural and Sensor Characterization of Ga-ZnO Nanodisk/nanorods Prepared by One Step Polymer Assisted Hydrothermal Process on AlN/Si Substrate
Dr. Jothi Ramalingam
(Anna University, India)
O-B2-2
Preparation of Porous InGaN via Electrochemical Etching Technique
Rosfariza Radzali
(Universiti Sains Malaysia)
O-C2-2
Nano-Clays as a Filler for Improving the Mechanical or Functional Properties of Polymers
Prof. Ashraf Elsayed Mohamed
(BRNO University of Technology, Egypt)
O-D2-2
Biodiesel production from Pseudomonas fluorescens Lp1 lipase immobilized on Amino-silane modified super paramagnetic Fe3O4 nanoparticles
S. Kanimozhi
(Sathyabama University, India)
1525 O-A2-3
Surface Compositional, Structural and Optical Properties of Nanohybrid TiO2/ZnO Coated Silicone Surface
Mohd Faizal Achoi
(Universiti Teknologi MARA)
O-B2-3
Characterization of Langmuir-Blodgett Films on Silicon Surface by Kelvin Probe Method
Mohd Adib Ibrahim
(Universiti Kebangsaan Malaysia)
O-C2-3
A Comparative Study on the Effect of Adiabatic Extrusion by Twin-screw Extruder to the Crystallization Pattern and Thermal Behavior of Polyamide 6/C20A Nanocomposites
Zulhelmi Ismail
(Universiti Malaysia Pahang)
O-D2-3
Elucidating the Dependence of Size and Concerntration of Gold Nanoparticles in Cellular Uptake
Nurshafawati Rosli
(Universiti Sains Malaysia)
5 | P a g e
1540 O-A2-4
Facile Method for In Situ Preparation of STY-MMA Co-polymer Containing Graphene Sheets Using Microwave Irradiation
Mohammad Ateeq Al-Dosari
(King Abdulaziz City for Science and Technology, Saudi Arabia)
O-B2-4
Low-Cost CVD Synthesis Route to GaN Nanostructures on Silicon Substrate
Qahtan Nofan Abdullah
(Universiti Sains Malaysia)
O-C2-4
Epoxidized Natural Rubber – Organomodified Montmorillonite Nanohybrid; Interaction and Thermal Decomposition
Ali Salehabadi
(Universiti Sains Malaysia)
O-D2-4
Cyclodextrin Modified Silica Nanocomposite for the Removal of Monocrotophose from Model Waste Water
Dr. Rohana Adnan
(Universiti Sains Malaysia)
1555 O-A2-5
Antibacterial and Antifungal Activity of Ag/TiO2 nanoparticles
Nur Hidayati Ahmad Barudin
(Universiti Sains Malaysia)
O-B2-5
Optimization of the Production of Aligned CNTs Array as the Gas Sensing Element
Mohamed Shuaib Mohamed Saheed
(Universiti Teknologi PETRONAS)
O-C2-5
The Effect of Zinc to Aluminium Ratio on the Synthesis of Zinc-Aluminium-3,4-Dichlorophenoxy Acetic Acid Nanocomposite and the Physicochemical Properties
Sheikh Ahmad Izaddin
(Universiti Teknologi MARA)
O-D2-5
Effect of Polyethylenimine Loading on the Physiochemical Properties of Amine-Functionalized Si-MCM-41
Dr. Anita Ramli
(Universiti Teknologi PETRONAS)
1610 DAY 2: Poster Session II
1630 Refreshments
1715 Conference Trip
6 | P a g e
DAY 3: 7th December 2012 (Friday)
Time Programme
0830 Plenary 2
Topic: New Materials for the Next Generation of High Efficiency Dye-Sensitized Solar Cells
Speaker: Dr. Nicolas Tetreault (Ecole Polytechnique Federale de Lausanne Switzerland)
0930 Keynote 2
Topic: Manufacturing and Application of SR Nanofiltration Membranes (SRNF) for Low-Cost Biodiesel Production
Speaker: Prof. Dr. Mohsen Jahanshahi (Babol University of Technology, Iran)
1015 DAY 3: Poster Session I
1040 Refreshments
Session Session A3
Advanced Materials (Synthesis)
Session B3
Energy
Session C3
Technology
1055 IS-A3-1
Selective Synthesis of ZnO Primary Nanostructures in Tonnage Capacities using a Custom-designed Pilot Plant Foundry
Dr. Shahrom Mahmud
(Universiti Sains Malaysia)
IS-B3-1
Nanotechnology Applications in Hydrogen Energy and Fuel Cells
Prof. Ir. Dr.Wan Ramli Wan Daud
(Universiti Kebangsaan Malaysia)
IS-C3-1
Gold Nanoelectrode Ensemble - A Promising Arsenic (As) Sensor
Prof. Dr. Al-Nakib Chowdhury
(Bangladesh University of Engineering and Technology)
1115 O-A3-1
Tuned Synthesis of Novel 3D ZnO Mesoscopic Crystals using Buffer Layer Assisted Grown Catalysts
M. Arslan Shehzad
(COMSATS Institute of Information Technology, Pakistan)
O-B3-1
Maximum Efficiency Limit Calculations for Single Walled Carbon Nanotube Solar Cells
David Daniel Tune
(Flinders University, South Australia)
O-C3-1
Nanomaterials-based Bioelectrochemical System to Detect the Pathogenic Organisms: Electrochemical Activity of Streptomyces
Dr. Rabeay Y. A. Hassan
(National Research Centre, Egypt)
1130 O-A3-2
Effect of Carbon and Phosphorus ion Irradiation on the Physical Properties of ZnO Nanowires
Dr. Javed Iqbal Saggu
(International Islamic University, Pakistan)
O-B3-2
Active Layer Spin Coating Speed Dependence on The Performance of Inverted Organic Solar Cell
Riski Titian Ginting
(Universiti Kebangsaan Malaysia)
O-C3-2
Fabrication and Characterization of Pb1-xYbxSe0.2Te0.8 Based Alloy Thin Films Thermoelectric Generators Grown Using Thermal Evaporation Method
Arshad Hmood Abd AlKadhim
(Universiti Sains Malaysia)
7 | P a g e
1145 O-A3-3
Ultrafast Formation of ZnO Nanorods via Seed-Mediated Microwave Assisted Hydrolysis Process
Tan Sin Tee
(Universiti Kebangsaan Malaysia)
O-B3-3
Dye‐Sensitized Solar Cells with Quasi‐Solid‐State Electrolytes
Dr. Mohammad Abedi
(Iranian Research Organization for Science and Technology, Iran)
O-C3-3
Magnetic Field Effect on the Inactivation of Bacteria by Ultra Low Pressure Plasma Discharge
Assoc. Prof. Ahmed Rida Galaly
(Beni-Suef University, Egypt)
1200 O-A3-4
Properties of ZnO Rod-like Structures due to Collapse of Bubble Implosion Process
Mahyatun Dayana Johan Ooi
(Universiti Sains Malaysia)
O-B3-4
The Potential of Poly Glycidyl Methacrylate-co-Ethyl Methacrylate based Solid Polymer Electrolyte for Dye-Sensitized Solar Cell Application
Imperiyka Mahamed
(Universiti Kebangsaan Malaysia)
O-C3-4
V-shaped Magnetic Core Generating High Magnetic Force for Bioparticles Separation
Ummi Kalsom Abidin
(Universiti Kebangsaan Malaysia)
1215 Lunch / Solat
Session Session A4
Advanced Materials (Synthesis)
Session B4
Energy
Session C4
Technology
Session D4
Photocatalytic
1445 IS-A4-1
Strategies to Produce 3 dimensional 1
dimensional Functional Oxide:
Focusing on Green Technology
Applications
Assoc. Prof. Zainovia Lockman
(Universiti Sains Malaysia)
IS-B4-1
Nanotechnology for Energy Efficiency
Prof. Evvy Kartini
(National Nuclear Energy Agency, Indonesia)
IS-C4-1
Molecular Imprinting NanoPolymer Nanomaterials: Amino Acid Chemisensor for Edible Bird Nest (EBN)
Prof. Mohd Noor Ahmad
(Universiti Malaysia Perlis)
IS-D4-1
Nano-Film Electrodes in PEC Processes: Novel Methods to Enhance Stability And Efficiency in Photovoltaic and in Water Purification Processes
Prof. Hikmat S. Hilal
(An-Najah N. University, Palestine)
1505 O-A4-1
Microwave -Assisted Synthesis of MWCNTs/TiO2 as Active Nanocomposite for Photocatalyst Application
Firas K. Mohamad
(Universiti Kebangsaan Malaysia)
O-B4-1
Study on the Use of Graded Multilayered TiO2 Electrode for Improving the Performance of Dye Solar Cells
Adel Eskandar Samsudin
(Universiti Teknologi PETRONAS)
O-C4-1
All-optical Switching induced by a Soliton Pulse in Nano-waveguide Ring Resonator
Dr. Ikhwan Naim Md. Nawi
(Universiti Teknologi MARA)
O-D4-1
Degradation of Rhodamine B using Semiconductor Nanoparticles with Different Bandgap Energy as Photocatalyst
Chan Yim Leng
(Universiti Sains Malaysia)
8 | P a g e
1520 O-A4-2
Surfactant Assisted Electrodeposition of Nanostructured CoNiCu Alloys
Ismail Hanafi
(Universiti Kebangsaan Malaysia)
O-B4-2
Photoactivity Comparison of Titania Nano Structure embedded with Copper Oxide Nanoparticles as Composite Photoanode
Hasmida Abdul Kadir
(Universiti Kebangsaan Malaysia)
O-C4-2
Design and Optimization of Coupled Microring Resonators
(MRRs) in Silicon-on-insulator
Dr. P. Susthitha Menon
(Universiti Kebangsaan Malaysia)
O-D4-2
Evaluation of the photocatalytic potential of TiO2 nanofibers for the destruction of H2S gas
Dr. Naeem Shahzad
(National University of Sciences and Technology, Pakistan)
1535 O-A4-3
High Aspect Ratio ZnO Nanorods Prepared Via Multi- Step Growth Solutions
Noor J. Ridha
(Universiti Kebangsaan Malaysia)
O-B4-3
Performance Enhancement of Hybrid Solar Cells Via Surface Modification With Diluted P3HT
Lim Eng Liang
(Universiti Kebangsaan Malaysia)
O-C4-3
Comparison STATCOM using Recurrent Neural Network (RNN) and SVC to Control and Design of New Recurrent Neural Networks (NRNN) for Power Systems
Ali A. Shojaei
(Universiti Teknologi Malaysia)
O-D4-3
Synthesis, Features and Solar-light-driven Photocatalytic Activity of TiO2 Nanotube Arrays Loaded with SnO2
Sim Lan Ching
(Universiti Malaya)
1550 O-A4-4
Effects of Reaction Temperature on CO2 Reforming of CH4 Over Carbon Nanotubes with Co and Mo Nanoparticles Catalyst with Co-Mo and MgO Nanoparticles
Mehrnoush Khavarian
(Universiti Sains Malaysia)
O-B4-4
Effects of Argon Gas on SnSe Thin Film Deposition in Thermal Vacuum Evaporation Technique: Enhancement of Photoelectrochemical Characteristics
Nordin Haji Sabli
(Universiti Putra Malaysia)
O-C4-4
Non-adiabatic Silica Microfiber for Temperature Sensor
Mohd Zuhdin Muhammad
(Universiti Malaya)
O-D4-4
The Influenced of Cu Concentration on TiO₂ Nanotubes for Low Concentration of Pb(II) Removal
Syazwani Mohd Zaki
(Universiti Sains Malaysia)
1605 O-A4-5
Utilization of a Green Analytical Method for the Synthesis of Zinc Oxide Nanoparticles
Dr. Aamna Balouch
(University of Sindh, Pakistan)
O-B4-5
Fabrication of WO3/Cu2O n-p Heterojunction Photoelectrode for Water Splitting Reaction
Ng Kim Hang
(Universiti Kebangsaan Malaysia)
O-C4-5
Guided Modes in Uniaxial Chiral Waveguide of Circular Cross-Section Under PEC Boundary
M. A. Baqir
(Universiti Kebangsaan Malaysia)
O-D4-5
Solvent Controlled Synthesis of Tin Oxide Nanocatalysts and their Applications in Photodegradation of Environmental Hazardous Materials
Assoc. Prof. Muhammad Akhyar Farrukh
(GC University Lahore, Pakistan)
1620 DAY 3: Poster Session II
1640 Closing Ceremony
1700 Refreshments
9 | P a g e
Poster Schedule
DAY 2: 6th December 2012 (Thursday)
NO TITLE PRESENTER
1
P-AM1-01
Synthesis of CdS Nanoparticles via AOT-Water-n-Heptane Microemulsion Technique
Rabiahtul Zulkafli
(Universiti Kebangsaan Malaysia)
2
P-AM1-02
Effect of Dimension on Optical Properties of Poly (9,9’-di-n-octylfluorenyl-2.7-diyl)/CdSe Quantum Dots Nanocomposites
Noor Razinah Rahmat
(Universiti Kebangsaan Malaysia)
3
P-AM1-03
Effect of Varying the Weight Ratio of CdSe on the Luminescence Properties of CdSe/ZnS core/shell Quantum Dot
Zuhana Ahmad Zubir
(SIRIM Berhad)
4 P-AM1-04
Ex-Situ Doping of ZnO Nanorods by Spray Pyrolysis Technique
Siti Nor Qurratu Aini Abd Aziz
(Universiti Sains Malaysia)
5 P-AM1-05
Synthesis Of Titania Nanowires From Local Synthetic Rutiles
Masliana Muslimin
(Malaysia Nuclear Agency)
6
P-AM1-06
Kinetics Transformation of Anatase to Rutile Phase for Titanium Dioxide Nanoparticles Prepared by Sol-Gel Method
Muneer M. Ba-Abbad
(Universiti Kebangsaan Malaysia)
7 P-AM1-07
Sol-Gel Synthesis of Titanium Dioxide Nanoparticles
Sharipah Nadzirah Syed Ahmad Ayob
(Universiti Malaysia Perlis)
8
P-AM1-08
Nano-TiO2 Synthesis and Characterization from Local Mineral Resources: A Comparative Analysis
Mahdi Ezwan Mahmoud
(Malaysian Nuclear Agency)
9
P-AM1-09
Facile Synthesis of Silver Nanoparticles by Chemical Reduction Route
R. Ratnamalar
(Universiti Sains Malaysia)
10
P-AM1-10
Self-Assembled Monolayer Gold Nanomesh Produced by DC Sputtering Method
Marlia Morsin
(Universiti Kebangsaan Malaysia)
11
P-AM1-11
Electrochemical Synthesis and Characterisation of Pd Nanostructures
Suhaila Hani Ilias
(Malaysian Nuclear Agency)
12
P-AM1-12
Fabrication of Au/Ni Multilayered Nanowires by Electrochemical Deposition
Nur Ubaidah Saidin
(Malaysian Nuclear Agency)
13
P-AM1-13
Immobilization of Silver-based Bimetallic Nanoparticles
on Titania-Support for Photocatalysis
M. A. Barakat
(King Abdulaziz University)
14
P-AM1-14
Facile Wet Chemical Approach for Synthesis of Silver Nanotriangular
Norhayati Abu Bakar
(Universiti Kebangsaan Malaysia)
15
P-AM1-15
Post-Annealing Effect on spin-coated Nanostructured ZnO on Porous Silicon
Kevin Alvin B Eswar
(Universiti Kebangsaan Malaysia)
16 P-AM1-16
Effect of CVD Synthesis Parameters on the Growth of Catalyst-Nur Atiqah Hamzah
10 | P a g e
Free ZnO NRs (Universiti Sains Malaysia)
17 P-AM1-17
Synthesis and Characterization of Cu-doped of ZnO Nanorods
Pung Swee Yong
(Universiti Sains Malaysia)
18
P-AM1-18
Synthesis and Characterization of Grape-Like SnO2 Structures Grown by a Thermal Evaporation Method
Lim Kar Keng
(Universiti Kebangsaan Malaysia)
19
P-AM1-19
Effect of Vanadium Carbide (VC) on the Properties and Microstructure of the Ultrafine Tungsten Carbide (WC-Co) Component Produced by Micro Powder Injection Process
Wong Yee Ning
(Universiti Kebangsaan Malaysia)
20
P-AM1-20
Effect of Selenium on Structure and Electrical Property for Bi0.4Sb1.6Se3xTe3(1-x) Novel Hexagonal Rods
Arej Khadim Abbas
(Universiti Sains Malaysia)
21
P-AM1-21
Effect of Milling Speed on Crystallinity of Nanozeolite Produced by Wet Milling
Nur Zahidatul Fatinah Mukhtar
(Universiti Teknologi MARA)
22
P-AM1-22
Fabrication Of Ca(OH)2 Nanostructures by Facile Solution – Based Synthesis at Various Reaction Temperatures as CO2
Adsorbent
Farah Diana Mohd Daud
(Universiti Sains Malaysia)
23
P-AM1-23
Synthesized of Nano-Wollastonite Material from Rice Husk Ash and Limestones
Hamisah Ismail
(Universiti Kebangsaan Malaysia)
24
P-AM1-24
Spin-On-Glass (SOG) Based Insulator of Stack Coupled Microcoils for MEMS Sensors and Actuators Application
Dr. Jumril Yunas
(Universiti Kebangsaan Malaysia)
25
P-AM1-25
Investigation of Mechanism of Gelation Between Microemulsion and Kappa-Carrageenan Gel Network
Nasima Akter
(Universiti Kebangsaan Malaysia)
26
P-AM2-01
Mechanical and Electrical Properties of p-type Bi0.4Sb1.6Te3 and n-type Bi2Se0.6Te2.4 Bulk Material for Thermoelectric Applications
Arej Khadim Abbas
(Universiti Sains Malaysia)
27
P-AM2-02
The Capacitance and Temperature Effects of the SiC- and Si-Based MEMS Pressure Sensor
Noraini Masri
(Universiti Kebangsaan Malaysia)
28 P-AM2-03
Dissolved Oxygen Absorption using Ru (dpp)32+
- Based Sensor
Farahiyah Ali
(Universiti Kebangsaan Malaysia)
29
P-AM2-04
Al, In and Sn doped ZnO Coated Fiber Optic for VOC Sensing Applications
Afa Rozana Abdul Rashid
(Universiti Kebangsaan Malaysia)
11 | P a g e
DAY 3: 7th December 2012 (Friday)
NO TITLE PRESENTER
30
P-AM3-01
Development of Au/TiO2 Nanocomposite Thin Film on Solid Substrate Utilizing Seed-Mediated Liquid Phase Deposition Method
Suratun Nafisah
(Universiti Kebangsaan Malaysia)
31
P-AM3-02
Effect of rf-power on the Structural Properties of CNx Thin Films by rf-PECVD Technique
Noor Farhana Husna Aziz
(Universiti Kebangsaan Malaysia)
32
P-AM3-03
Morphology and Optical Properties of Zinc Oxide Films Grown on Metal Coated Glass Substrates by Aqueous Chemical Growth
Maria Abu Bakar
(Universiti Kebangsaan Malaysia)
33
P-AM3-04
Preparation of TiO2 Nanowire - Cu2O Nanocube Composite Thin Film and Its optical Characterization
Fitri Yenni Naumar
(Universiti Kebangsaan Malaysia)
34
P-AM3-05
A Study of Properties of the Nanocrystalline CdO Thin Film Prepared by Solid-vapor Deposition Method
Mustafa Zaien
(Universiti Sains Malaysia)
35
P-AM4-01
Effect of Different Weight Fractions on Dielectric Properties of Barium Ferrite-Barium Titanate Systems
Siti Nurliyana Anuar
(Universiti Kebangsaan Malaysia)
36
P-AM4-02
The Performance of Nanosilicate from Rice Husk Ash as Green Corrosion Inhibitor for Carbon Steel in 0.5M HCl
Denni Asra Awizar
(Universiti Kebangsaan Malaysia)
37
P-AM4-03
Preparation and Evaluation of Nanostructure Polymer
for Modification of Cement Paste
Magdy Mohamed Ayoub
(National Research Center, Egypt)
38
P-AM4-04
Inhibition Effects of New Organic Molecule on the Corrosion of Mild Steel in Hydrochloric Acid Solution
Ahmed A. Al-Amiery
(Universiti Kebangsaan Malaysia)
39
P-EG-01
Passive Direct Methanol Fuel Cell With Carbon Nano-Fiber Supported Electrode
Azran Mohd Zainoodin
(Universiti Kebangsaan Malaysia)
40 P-EG-02
Making the Most Out of the Sun using Efficient Technique
Charles Ahamefula Ubani
(Universiti Kebangsaan Malaysia)
41
P-EG-03
Molybdenum Complex as Potential Photosensitizer for Direct Water Splitting
Mark Lee Wun Fui
(Universiti Kebangsaan Malaysia)
42
P-EG-04
Palladium-Silica Nanofiber Modified Nafion Composite Membrane for DMFC Application
Thiam Hui Sam
(Universiti Kebangsaan Malaysia)
43
P-PC-01
The Review on Photoelectrochemical Process of Methanol
and Water Mixture Solution
Haslina Ahmad
(Universiti Kebangsaan Malaysia)
44 P-PC-02
Photocatalytic performance of Ag loaded TiO2
Siti Aida Ibrahim
(Universiti Sains Malaysia)
45 P-TG-01
High speed SiGe/Si MQW SOI-based Lateral PIN Photodiode
Siti Kalthsom Tasirin
(Universiti Tenaga Nasional)
12 | P a g e
46
P-TG-02
An Implementation of New Recurrent Neural Network for
DC Motor Control Using IMC Scheme
Ali Asghar Shojaei
(Universiti Teknologi Malaysia)
47
P-TG-03
Angle Shifting in Surface Plasmon Resonance: Experimental and Theoretical Verification
Wan Maisarah Mukhtar
(Universiti Kebangsaan Malaysia)
48
P-TG-04
Design and Optimization of 22 nm Gate Length High-k/Metal Gate NMOS Transistor
Afifah Maheran Abdul Hamid
(Universiti Kebangsaan Malaysia)
49
P-TG-05
Carbon Nanotubes (CNTs) Biosensor Design and Fabrication for Sensoring Device
Azniza Abas
(Universiti Malaysia Perlis)
50
P-TG-06
Nanomaterials for Green Technology
Introducing Discourse Analysis to Nanotechnology
Salmah Karman
(Universiti Kebangsaan Malaysia)
51 P-TG-07
Effect of Nanoindentation Loading Rate on Gold Ball Bond
Muhammad Nubli Zulkifli
(Universiti Kebangsaan Malaysia)
52
P-TG-08
The Study of Oxygen Adsorption on Cobalt Phthalocyanine (Copc) by Density Functional Theory
Nabila A. Karim
(Universiti Kebangsaan Malaysia)
53
P-TG-09
Effect of Mesoporous Platinum Film on Counter Electrode
in Flexible DSC Using ITO-PEN Film
Ahmad Zahrin Sahmer
(Universiti Teknologi PETRONAS)
54
P-TG-10
Application of Nanotechnology and Nanomaterials in Construction Sector
Mojtaba Valinejad Shoubi
(Universiti Teknologi Malaysia)
55
P-TG-11
Full Scale Experimental Studies of a Passive Cooling Roof in Hot Arid Areas
Hamida Benceikh (University Amar Telidji Laghouat)
56
P-EV-01
Measuring Radon Concentration and Toxic Elements in the Irrigation Water of the Agricultural Areas in Cameron Highlands, Malaysia
Murtadha S. Al-Nafiey
(Universiti Sains Malaysia)
57
P-EV-02
Assessment of Human Health Risks for Arsenic, Cadmium and Lead Bioaccumulation in Gallus gallus domesticus meat from Selangor
Salwa A. Abduljaleel
(Universiti Kebangsaan Malaysia)