workshop tools · gear units & boxes e. repair & maintenance of printing press machines f. assembly...
TRANSCRIPT
-
For the professional!
WORKSHOPTOOLS
Catalogue Mini
CB-04
-
www.groz-tools.com2
1/2" DriveImpact Wrench
Rear exhaust 3 speed position control, full power in reverse
CATNR.
ORD NR.
FREE SPEED
MAX.TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALLLENGTH
NETWEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/1-2/PRM/1 61923 9500 1000 1356 1/4 3/8 7.3 207 7.5 190 2.3 5.07
Strong yet lightweight composite material construction, evenly balanced design & compact profile make the GROZ impact wrenches ideal to get THE JOB DONE
Ideal for professionals who want the perfect blend of optimum performance & comfort of use.
Twin Hammer impact mechanism delivers balanced blows
3 speed position control to adjust tool speed for different applications in the forward direction
Full torque output in reverse direction
Rear handle exhaust with muffler directs air away from the job & operator, ensuring safety
ORDERING INFORMATION
Twin Hammer Mechanism
Ideal for use ina. General automotive repair
& service centers for passenger vehicles
b. Assembly lines for 4 wheeler & LCV’s
c. MRO jobs in railways d. Repair & maintenance of
gear units & boxese. Repair & maintenance of
printing press machines f. Assembly lines for white
goods (fans, washing machines etc.
*@15 SEC
NETWEIGHT
2.3 KG(5.07 LB)
FREE SPEED
9,500RPM
MAXTORQUE*
1356 Nm(1000 ft-lb)
*@15
Sec
.
AVG. AIRCONSUMPTION
7.3 CFM(207 LPM)
COMPOSITEBODY
MAX NUT CAPACITY
M22
FEATURES
01
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
1/2" DriveAngle Impact Wrench
CATNR.
ORD NR.
FREE SPEED
MAX. TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALL LENGTH
NET WEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/1-2/ANG 61924 6500 500 678 1/4 3/8 4.2 119 9.76 248 1.4 3.09
Robust & durable aluminium housing
Stubby style wrench with long handle is ideal for use in confined spaces
Jumbo Hammer Impact Mechanism for instant high torque output
The motor in the head of the tool and direct drive mechanism makes this angle impact wrench better balanced and more efficient on the job
3 speed position control to adjust tool speed for varying applications; both in forward & reverse directions
Reduced vibrations(50%) & increased torque output(20%) compared to other geared angle impact wrenches
360° Swivelling exhaust
ORDERING INFORMATION
*@15 SEC
NETWEIGHT
1.4 KG(3.09 LB)
MAX. NUT CAPACITY
M16
FREE SPEED
6,500RPM Al
ALUMINIUMBODY
AVG. AIRCONSUMPTION
4.2 CFM(119 LPM)
MAXTORQUE*
678 Nm(500 ft-lb)
*@15
Sec
.
Jumbo Hammer Mechanism 360° Swivelling Exhaust 3 Speed Position Control
FEATURES
02Ideal for use ina. General automotive
repair & service center for passenger vehicles
b. Assembly lines for 4 wheeler & LCV’s
c. MRO jobs in railways d. Repair & maintenance of
gear units & boxese. Repair & maintenance of
printing press machines f. Assembly lines for white
goods (fans, washing machines etc.)
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
3.4" (88 mm)
9.7" (248 m
m)
-
www.groz-tools.com4
FEATURES
1/2" DriveImpact Wrench
CAT NR.
ORD NR.
FREE SPEED
MAX. TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALL LENGTH
NET WEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/302 61925 7000 369 500 1/4 3/8 5 141 7 180 2 4.4
Powerful, Robust & Reliable!Optimised for the two wheeler Industry
Robust die-cast aluminium housing
Superior Rocking Dog impact mechanism for optimum power transmission and constant torque output
Adjustable 4 speed position control in forward direction
Full speed in reverse direction
Front Handle Exhaust
Easy to use forward/reverse switch allows operator to change direction while using the tool
Ideal for use in 2 wheeler industry for repairs such as tyre-changing and maintenance applications
ORDERING INFORMATION
*@15 SEC
NETWEIGHT
2 KG(4.4 LB)
MAX. NUT CAPACITY
M14
FREE SPEED
7,000RPM
Al
ALUMINIUMBODY
AVG. AIRCONSUMPTION
5 CFM(141 LPM)
MAXTORQUE*
500 Nm(369 ft-lb)
*@15
Sec
.
Rocking Dog Mechanism Front exhaust 4 speed position control
03
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
CAT NR. ORD NR.
FREE SPEED
MAX. TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALL LENGTH
NET WEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/306 61926 7500 885 1200 1/4 3/8 6.5 184 7.2 185 2.1 4.62
Robust & Durable Composite body Impact Wrench
TPR grip for maximum comfort and reduced vibration
Twin hammer impact mechanism for balanced blows
Adjustable 3 speed position control in forward direction
Full speed in reverse direction
Ergonomically engineered design that reduces stress and fatigue
Rear handle exhaust with muffler reduces noise & directs air away from the working area, ensuring safety
Ideal Use In• Four-wheeler workshops for
general automotive repair & service centers for passenger vehicles
• Gear units and printing press machines for repair & maintenance
ORDERING INFORMATION
NETWEIGHT
2.1 KG(4.62 LB)
MAX. NUT CAPACITY
M16
FREE SPEED
7,500RPM
AVG. AIRCONSUMPTION
6.5 CFM(184 LPM)
MAXTORQUE*
1200 Nm(885 ft-lb)
*@15
Sec
.
Rear exhaust 3 speed position controlFull Power in reverse
COMPOSITEBODY
Twin Hammer Mechanism
*@15 SEC
1/2" Drive Impact Wrench04
FEATURES
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
www.groz-tools.com6
Rear exhaust 3 speed position control, full power in reverse
CATNR.
ORD NR.
FREE SPEED
MAX.TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALLLENGTH
NETWEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/3-4/PRM/1 61931 6000 1700 2305 3/8 1/2 7.3 207 8.7 222 4.19 9.27
Strong yet lightweight composite material construction, evenly balanced design & compact profile make the GROZ impact wrenches ideal to get THE JOB DONE
Ideal for professionals who want the perfect blend of optimum performance & comfort in use
Improved Twin Hammer mechanism imparts high torque and durability. The strong reinforced hammer frame can take higher impact for a longer time & larger anvil provides a large contact area. 25% higher torque compared to the twin hammer & 3X enhanced life
3 speed position control to adjust tool speed for different applications in the forward direction
Full torque output in reverse direction
Rear handle exhaust with muffler directs air away from the job & operator, ensuring safety
ORDERING INFORMATION
3/4" DriveImpact Wrench
*@15 SEC
FEATURESMAX NUT CAPACITY
M26
FREE SPEED
6,000RPM
AVG. AIRCONSUMPTION
7.3 CFM(207 LPM)
COMPOSITEBODY
MAX TORQUE*
2305 Nm
(1700 ft-lb) *@15
Sec
.
WEIGHT
4.19 KG(9.27 LB)
Ideal for use ina. Tyre & engine assembly on trucks,
buses, tractors etc.b. MRO jobs in oil & gas industryc. Assembly work for diesel & gas
enginesd. MRO jobs in paper processing
plants
05
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
Rear exhaust 3 speed position control, full power in reverse
CATNR.
ORD NR.
FREE SPEED
MAX.TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALLLENGTH
NETWEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/0-1/PRM/1 61941 6000 1700 2305 3/8 1/2 7.3 207 8.7 222 4.24 9.35
Strong yet lightweight composite material construction, evenly balanced design & compact profile make the GROZ impact wrenches ideal to get THE JOB DONE
Ideal for professionals who want the perfect blend of optimum performance & comfort in use
Improved Twin Hammer mechanism imparts high torque and durability. The strong reinforced hammer frame can take higher impact for a longer time & larger anvil provides a large contact area. Gives 25% higher torque compared to the twin hammer & 3X enhanced life
3 speed position control to adjust tool speed for different applications in the forward direction
Full torque output in reverse direction
Rear handle exhaust with muffler directs air away from the job & operator, ensuring safety
ORDERING INFORMATION
1" DriveImpact Wrench
*@15 SEC
FEATURES
WEIGHT
4.24 KG(9.35 LB)
MAX NUTCAPACITY
M26
FREE SPEED
6,000RPM
AVG. AIRCONSUMPTION
7.3 CFM(207 LPM)
COMPOSITEBODY
MAX TORQUE*
2305 Nm
(1700 ft-lb) *@15
Sec
.
Ideal for use ina. Truck garages, construction &
mining equipment where large impact power is required
b. Erection & commissioning of heavy equipment in power plants, sugar mill, cement plants & steel mills
c. MRO jobs in shipping wardsd. Routine maintenance of wind mills
06
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
www.groz-tools.com8
CAT NR. ORD NR.
FREE SPEED
MAX. TORQUE
AIR INLET SIZE
AIR HOSE I.D.
AVG. AIR CONSUMPTION
OVERALL LENGTH
NET WEIGHT
(RPM) (FT-LB) (NM) (INCH) (INCH) (CFM) (LPM) (INCH) (MM) (KG) (LB)
IPW/502 61942 3500 1770 2400 1/2 1/2 35 1000 23.2 590 11 24.25
Robust & Durable aluminum housing for demanding maintenance applications
9-inch extended anvil provides easy reach and accessibility
Twin hammer impact mechanism for balanced blows
Superior quality D handle with trigger inside
Adjustable 3 speed position control in both forward & reverse directions
Side exhaust blows air away from work place
ORDERING INFORMATION
*@15 SEC
NETWEIGHT
11 KG(24.25 LB)
MAX. NUT CAPACITY
M32
FREE SPEED
3,500RPM
Al
ALUMINIUMBODY
MAXTORQUE*
2400 Nm(1770 ft-lb)
*@15
Sec
.
Ideally used for heavy duty applications in:a. Truck garages,
construction & mining equipment where large impact power is required
b. Power plants, sugar mills, cement plants & steel mills for erection, commissioning & maintenance application of heavy equipment
c. MRO operations in shipyards
d. Maintenance of wind mills
9" (229 mm)
Twin Hammer Mechanism Side exhaust 3 speed position control
07 1" DriveImpact Wrench
FEATURES
For more sizes & range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 29-41
-
FEATURES
CAT NR.
ORD NR.
TYPE
SIZE SHAFT LENGTH
(MM) (INCH) (MM) (INCH)
SCDR/R/FL3/75 36241 3 1/8 75 3
SCDR/R/FL3/100 36240 3 1/8 100 4
SCDR/R/FL4/100 36242 4 5/32 100 4
SCDR/R/FL5.5/100 36243 5.5 7/32 100 4
SCDR/R/FL5.5/150 36244 5.5 7/32 150 6
SCDR/R/FL6.5/38 36248 6.5 1/4 38 1-1/2
SCDR/R/FL6.5/100 36245 6.5 1/4 100 4
SCDR/R/FL6.5/150 36246 6.5 1/4 150 6
SCDR/R/FL6.5/200 36247 6.5 1/4 200 8
SCDR/R/FL8/150 36249 8 5/16 150 6
SCDR/R/FL8/200 36250 8 5/16 200 8
SCDR/R/PH0/75 36270 PH0 75 3
SCDR/R/PH1/75 36272 PH1 75 3
SCDR/R/PH1/100 36271 PH1 100 4
SCDR/R/PH2/38 36276 PH2 38 1-1/2
SCDR/R/PH2/100 36273 PH2 100 4
SCDR/R/PH2/150 36274 PH2 150 6
SCDR/R/PH2/200 36275 PH2 200 8
SCDR/R/PH3/150 36277 PH3 150 6
SCDR/R/PZ1/75 36300 PZ1 75 3
SCDR/R/PZ2/100 36301 PZ2 100 4
SCDR/R/PZ3/150 36302 PZ3 150 6
SCDR/R/T10/100 36310 T10 100 4
SCDR/R/T15/100 36311 T15 100 4
SCDR/R/T20/100 36312 T20 100 4
SCDR/R/T25/100 36313 T25 100 4
SCDR/R/T30/100 36314 T30 100 4
SET
SCDR/R/6/ST 33746 Flat: 3x75 mm,5.5 x 100 mm, 6.5 x 150 mm;Phillips: PH0 x 75 mm, PH1 x 100 mm, PH2 x 150 mm;
Premium quality screwdrivers for the professional user
Chrome Vanadium Construction for higher torque & wear resistance
Shaft extends into the handle, ensuring full transfer of force.
Torque Maximiser GripMulti-component injection moulded non-slip hexagonal grip helps in transmitting higher torque
Magnetised Tip Tip is accurately hardened ensuring long lasting durability
Tip has black oxide finish for enhanced corrosion resistance
HARDENED
51-54HRC
ORDERING INFORMATION
CHROMEVANADIUM
Magnetised Tip
Cr-VConstruction
Torque Maximiser Grip - Anti
Roll Design
Screwdrivers EDR-55SCDR-R08
For more sizes and range, refer to GROZ ‘Workshop Tool Catalogue’ - pg 54 - 59
-
www.groz-tools.com10
Ideal choice for electricians for use in terminal blocks, control cabinets, switches, relays, sockets etc.
Chrome Vanadium ConstructionIndividually forged from chrome-vanadium steel, blades are fully hardened & tempered for increased durability & strength
Certified to IEC 60900
Magnetized Tip Accurately hardened tip ensures long lasting durability
1000V SafeEach tool is tested for dielectric strength under a 10000 Volt load to guarantee safe working upto 1000 Volts
Bi-material ergonomic handle is impact and abrasion resistant
Sold as a set of 6 srewdrivers and a voltage tester.
Voltage tester also available as spare
7 pc Insulation Screwdriver Set
ORDERING INFORMATION
CATNR.
ORDNR.
DESCRIPTION
SCDR/VDE/7/ST 33747 Set of Screwdrivers
VT/110-250 33790 Voltage Tester
SCDR-VDE
CHROMEVANADIUM
1000 VOLTSSAFE
Voltage Tester
1/4" × 6"
(6 x 150 m
m)7/32" × 5"
(5.5 x 125 mm
)5/32" × 4"
(4 x 10
0 m
m)
1/8" × 4"
(3 x 100
mm
)
PH
2 × 4"
(PH
2 x 100
mm
)
PH
1 × 3-1/8"(P
H1 x 80
mm
)
Single-P
ole
TYPE SIZE SHAFTLENGTH
(MM) (INCH) (MM) INCH
SLOTTED
6.5 1/4 150 6
5.5 7/32 125 5
4 5/32 100 4
3 1/8 100 4
PHILLIPS
PH1 80 3-1/8
PH2 100 4
VOLTAGE TESTER
110V - 230V Single Pole Voltage Tester
SET INCLUDES
09
FEATURES
-
[email protected] 1111
5°
72 Teeth with 5 degree action arc: for smooth movement
Bi-hex profile: grips the
fastener better
A wider turning angle as compared to traditional wrenches giving the user more space to operate
ORDERING INFORMATION
FEATURESFORGED
CONSTRUCTIONCHROME
VANADIUMHEAT
TREATED
Combination Ratcheting WrenchesExtra Long
CSP- XRT
CATNR.
ORD NR.
SIZE CATNR.
ORD NR.
SIZE LENGTH
(MM) (INCH) (MM) (INCH)
METRIC SIZES IMPERIAL SIZES
CSP/XRT/8/UG 33862 8 CSP/XRT/5-16/UG 33961 5/16 148 5-27/32
CSP/XRT/10/UG 33864 10 CSP/XRT/3-8/UG 33962 3/8 167 6-37/64
CSP/XRT/12/UG 33866 12 - - - 196 7-23/32
CSP/XRT/13/UG 33867 13 CSP/XRT/1-2/UG 33964 1/2 205 8
CSP/XRT/14/UG 33868 14 CSP/XRT/9-16/UG 33965 9/16 223 8-25/32
CSP/XRT/17/UG 33871 17 CSP/XRT/11-16/UG 33967 11/16 262 10-21/64
CSP/XRT/19/UG 33873 19 CSP/XRT/3-4/UG 33968 3/4 281 11
SET
CSS/XRT/7ST/UG 33890 Set of 7 extra long Ratching Spanners in metric sizes
Ideal choice for quick & convenient use in tight spaces
Exceeds ANSI and DIN standard
Especially designed for high torque applications with outstanding quality & performance
15% longer that traditional ratcheting wrenches, giving the user more leverage with less effort
72 teeth, strong gear ratcheting ring with 5° arc for smooth movement
Ratcheting ring feature allows increased working speed, eliminating the need to remove the wrench from the fastener after each turn
Fine gear tooth design makes the Ratcheting Wrench suitable for working in tight and hard to access areas where a ratchet and socket will not fit
Narrow and thin head with a wider turning angle ensures the user has more space to operate
Chrome plated for corrosion protection with ultra premium finish for scratch proof surface Leng
th
Size
CLASSIC WIDER
10
For range of Reversible Ratchting Wrenches refer to GROZ ‘Workshop Tool Catalogue’ - pg 95
-
www.groz-tools.com12
Retra KnifeMini
KNV/R/311
For more knives in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 120-121
ORDERING INFORMATION
CAT NR. ORD NR. DESCRIPTION
KNV/R/3 61504 Retra Knife - Mini
BLD/KNV/3/ST 61513 Set of 15 Spare Blades
Blade storage compartment can hold upto 6 heavy duty blades
Switch to close the knife
Squeeze lever to load blades
Ergonomic TPR handle for comfort
Thumb groove for greater control
Quick release button to change blades
Heavy duty Retractable knife for continuous, non-stop usage
Rugged Zinc alloy body for prolonged tool life
SK 2 steel blades are accurately hardened & have superior edge retention to handle tough cutting jobs with ease.
Each blade can be used twice. When blunt, simply pull out blade, invert it & re-install. Knife is ready to use again
Suitable for cutting plastic, rubber, wood, gaskets, cardboard, fibre etc.
Squeeze lever to load blade
Quick release button to slide out used blade
Storage compartment for storing 3 spare blades
-
[email protected] 1313
Utility Knife Professional
Retractable knife for continuous usage with reduced fatigue
Rugged Zinc alloy body for prolonged life
Comes with Ergonomic TPR grip which reduces slippage and increases user comfort
SK2 Steel blades are accurately hardened & have superior edge retention to handle tough cutting jobs with ease
Each blade can be used twice. When blunt, simply pull out blade, invert it & re-install. Knife is ready to use again
Lanyard hole for tying the knife with cable tie & hanging it on wall
ORDERING INFORMATION
CAT NR. ORD NR. DESCRIPTION
KNV/R/7 61502 Knife
BLD/KNV/5/ST 61511 Set of 10 spare blades
BLADE THICKNESS
0.02"(0.6 MM)
BLADEMATERIAL
LeverSwitch for changing
blade
Blade storage compartment can hold upto 5 heavy duty blades
HangHole
KNV/R/712
FEATURES
For more knives in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 120-121
Quick auto loading design allows the user to replace blunt blades in seconds with simple push of a button
Easy access slider blade storage holds up to 5 blades for fast and easy blade change
Suitable for cutting plastic, rubber, wood, gaskets, cardboard, fibre etc.
Squeeze lever to load blade When blunt, simply pull out blade, invert it & re-install
Quick release button to slide out used blade
Storage compartment for storing 5 spare blades
Squeeze lever again to load new blade
-
www.groz-tools.com14
KNV-10
ORDERING INFORMATION
CATNR.
ORDNR.
DESCRIPTION
KNV/S/1 61520 Knife
BLD/KNV/S/1/ST 61512 Set of 10 Spare Blades
Rugged die cast aluminum body
Hardened SK2 steel blades with superior edge retention to handle tough cutting jobs with ease
Textured finish for positive slip-resistant grip
Easy access blade change
Auto locking slider for secure hold
Retractable blade forvariable depth of cut
Removable blade snapper for removing worn out blades
KNV-S
Heavy Duty Retractable Construction Knife
Rugged Zinc alloy body for prolonged life
SK2 Steel blades are accurately hardened & have superior edge retention to handle tough cutting jobs with ease
In-built blade storage compartment
Each knife comes with5 blades
Lanyard hole for tying the knife with cable tie & hanging it on wall
Bottom edge of knife can be used for hitting paper boards, cardboards after cutting etc
ORDERING INFORMATION
CATNR.
ORDNR.
DESCRIPTION
KNV/10 61503 Knife
BLD/KNV/5/ST 61511 Set of 10 Spare Blades
Simply slide the lever to retract the blade
Quick & convenient blade interchange
Open screw to reachblade storage compartment
Spare blades stored in the compartment with 1 blade in use
Slide the lever to retract the blade
In-built blade snap-off tool for blunt blades
HangHole
HangHole
BLADEMATERIAL
BLADEMATERIAL
13
14
For more knives in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 120 - 121
Snap OffKnife
-
[email protected] 1515
RT-HD
ORDERING INFORMATION
Heavy Duty Long Arm Hand Riveter
High performance 2 jaw riveter with built in mandrel collector
5 interchangeable nose pieces threaded onto the handle for convenient storage when not in use
Well balanced long arms for greater leverage
Anti-skid and soft handle grip for user comfort
Fewer moving parts ensure less wear & tear
For Rivetinga. Aluminum and steel POP/
Blind Rivets1/8" (3.2 mm)5/32" (4.0 mm)3/16" (4.8 mm)15/64" (6.0 mm)1/4" (6.4 mm)
b. Stainless Steel Rivets1/8" (3.2 mm)5/32" (4.0 mm)3/16" (4.8 mm)15/64" (6.0 mm)
Ideal for use in ship building, machine manufacturing, on-shore & off-shore fabrication jobs, infrastructure projects, agriculture equipment manufacturing etc.
CATNR.
ORDNR.
RT/HD/17 31658
Ergonomic Grip
Mandrel Collector
Nose pieces threaded onto
the handle
Die Cast Aluminium Body
Heavy Duty2 Jaw Construction
Heavy DutySteel Handle
NoseWrench
17"
(432
mm
)
15
For more riveters in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 217 - 220
-
www.groz-tools.com16
ORDERING INFORMATION
360° SwivelHead Riveter
Innovative 360° swivel head riveter that can be used at any angle
Swivel head allows the user to set rivets at right angle or straight-on with a simple twist of riveter head
Manufactured from high strength structural steel and light weight aluminum alloy
All parts that come in contact with rivet are heat treated for increased wear resistance
Spring loaded riveter handle for easy rivet loading
Anti slip TPR grip for user comfort for riveting
Premium powder coated finish for corrosion resistance
Includes 4 nose pieces & a nose piece wrench
For Rivetinga. Aluminum and Steel POP/
Blind Rivets 3/32" (2.4 mm)
1/8" (3.2 mm)5/32" (4.0 mm)3/16" (4.8 mm)
b. Stainless Steel Rivets1/8" (3.2 mm)5/32" (4.0 mm)
Suitable for industrial, automotive, engineering & maintenance jobs
360° swivel head allows the user to set rivets at right angle or straight-on with a simple twist of rivet head
CATNR.
ORDNR.
RT/SW/360 31659
360°SwivelHead
RT-SW16
For more riveters in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 217 - 220
-
[email protected] 1717
ORDERING INFORMATION
Double Push Lock Indexing Pry Bar
Unmatched AccessDouble Push Lock Mechanism with head indexable through 180° & 11 locking positions
Robust ConstructionForged from Chrome Molybdenum steel, the indexing head & gear are wear resistant and ideal for high strength applications
Versatile & Adjustable Access Push button indexing head allows user to easily change the head position, maximizing the leverage point to get the job done
Double push lock safety feature prevents accidental unlocking of head
Meets & exceeds ASME specifications
Industrial Manganese Phosphate FinishTo help protect against corrosion hence making these pry bars more durable
Ideal for engine re-positioning and placement, aligning steel components, removing bearing from housing, re-positioning of intricate parts in heavy equipment etc.
FORGEDCONSTRUCTION
CAT NR.
ORD NR.
SIZE
(INCH) (MM)
IPRY/8 33190 8 200
IPRY/16 33191 16 420
IPRY/24 33192 24 600
IPRY/33 33193 33 830
Head indexes through 180° for optimized leverage point
Chrome Molybdenum Construction
Push button indexing head for quick head angle
adjustment
Chrome Vanadium Body
Ergonomic Handle Design
180°
IPRY
FEATURES
17
For more Pry and Alignment Bars in our range refer to the GROZ ‘Workshop Tool Catalogue’ - pg 43 - 45
-
www.groz-tools.com18
Digital Torque Adaptor withTyre Pressure Gauge
TQA-D
Digital Torque Adaptor comes with an in-built Tyre Pressure Gauge making it a must have for every mechanic
Converts any regular ratchet handle into a digital torque wrench
After tightening tyre bolts, user can take measurement of tyre pressure with the same tool
Large easy to read LCD display with backlight & a resolution of 0.1 Nm (0.1 lb-ft) / 0.1 PSI
Light & sound indication with 3 LED lights which turn from green to red on reaching the required torque level
Measures Torque in 5 unitsNm, Lb-ft, In-ft, kg-m, Kg-cm
Measures Pressure in 4 UnitsPSI, Kpa, Bar, Kg-cm²
Memory function can store up to 50 readings
Works with 2 AAA batteries with a life of 50 continuous working hours
Each unit is supplied with calibration certificate
Comes in a safe to store & carry blow moulded case
Tyre pressure gauge
MODE 1Use as digital torque adaptor
MODE 2Use as tyre pressure gauge
1/2" square drive
LED Indicator
LCD display with backlight
±2%
ACCURACY
ISO 6789
CONFORMS TOWORKING PRESSURE
1 - 100 PSI
WORKING TORQUE
40 - 200 NM(29.5 - 147.6 LB-FT)
SQUARE DRIVE 1/2"
MODE Trace / Peak
BACKLIGHT DISPLAY Yes
ALERT LED & Buzzer
WEIGHT 230 gms (0.5 lbs)
OPERATING AMBIENT TEMPERATURE
-10°C to 60°C (14°F to 140°F)
STORAGE TEMPERATURE -20°C to 70°C (-4°F to 158°F)
AUTO SHUT-OFF 60 seconds
SPECIFICATIONS
FEATURES
CAT NR.
ORDNR.
TQA/D/200/100 38890
ORDERING INFORMATION
18
-
[email protected] 1919
MODE 2Use as tyre pressure gauge
CAT NR.
ORDNR.
STRAP LENGTH STRAP WIDTH FOR OBJECTS WITH DIA.
(INCH) (MM) (INCH) (MM)
STW/12G 62009 36 914 1-1/16 27 9" (230 mm)
STW/18G 62014 34 864 1-3/4 44 8" (203 mm)
Aluminium I-beam handle for increases strength
Non marring nylon belt prevents scratching and damage to finished surfaces
Use on plastic or metal pipes & fittings, filters, shafts and irregular shapes.
Easily replaceable strap with removable rivets
ORDERING INFORMATION
Strap
Removable pin design for quick strap change
Used on irregular shaped objects
Used on oil filters in automobiles Used on filters on industrial machinery
Used on plastic or metal pipes
STWStrapWrench19
STW/12G
STW/16G
-
www.groz-tools.com20
Fast lifting design for quick jumpstart to reach 'lifting point'
START
Hydraulic Floor Jack3 Ton
The GROZ3 TON Hydraulic
Floor Jackfor ultimate
SpeedSafety Stability
-
[email protected] 2121
Hydraulic Floor Jack3 Ton
ConstructionExtra heavy duty steel body for ultimate stability and rigidity
Large, swivelling saddle for convenient positioning of jack. Rubber cushioning on saddle prevents damage to vehicle lift points
Nylon wheels for easy manoeuvrability and positioning
2 piece handle for ease of use and reduced operator fatigue. Protective sleeve on the handle prevents accidental damage to vehicle panels during use
SafetyUniversal joint release mechanism for safe and controlled lowering of the jack
Built-in safety valve protects against overloading of jack @ 120% of rated capacity
Hydraulic oil by-pass system protects ram from being over extended
Performance - 3X Faster PerformanceFast lifting design for quick jump start to reach lifting point
WEIGHT
33 KG(72.6 LBS)
LIFT RANGE
5-1/4" − 18-1/4"(133 MM − 465 MM)
CAT NR.
ORDNR.
DIMENSIONS
(INCH) (MM)
JACK/FL/3D 61750 27× 13-1/2× 6-1/8 682×344×155
ORDERING INFORMATION
Rubber cushion
on saddle prevents marring
Comparing the GROZ quick start hydraulic floor jack with a standard floor jack in the market
After the 1st stroke, The GROZ Quick Start Hydraulic Floor Jack moves up 3 times more than the standard jack
In 6 strokes, the GROZ Hydraulic Floor Jack reaches lifting point whereas the standard Floor Jack is still way behind
AT STROKE 0 AFTER 1ST STROKE AFTER 6TH STROKE
Cushion on handle prevents
damage
Quick Start Dual Pump Technology At each stroke before reaching the jacking point, the GROZ Quick Start Hydraulic Floor Jack moves up 3 times more than the standard jack
JACK-FL
FEATURES
20
-
www.groz-tools.com22
Manufactured from heavy gauge steel sheet
Rugged double wall construction for enhanced durability
Corrosion resistant powder coated finish
Drawers with ball bearing slides for 100% opening
All drawers lined with 2mm vinyl sheet
Integrated centralised locking system to lock/unlock all drawers in a single operation
4 heavy duty castors - 5" x 2" (125 x 50mm). Rear castors with brakes for safety
Ergonomic handle for ease of movement. Handle can be mounted on either sides
Portable Workstation
ORDERING INFORMATION
CAT NR.
ORDNR.
OVERALL DIMENSION
(INCH) (MM)
MTB/50 40011 32-3/4 x 27 x 18-1/4 833 x 686 x 464
DRAWERS HEIGHT WIDTH DEPTH
(INCH) (MM) (INCH) (MM) (INCH) (MM)
TOP THREE DRAWERS
3 75 23-1/4 590 18-1/8 460
BOTTOM TWO DRAWERS
6 154 23-1/4 590 18-1/8 460
MTB-50
DOUBLE WALL CONSTRUCTIONBALL BEARING
TROLLEY LOADCAPACITY
450 KG 992 (LB)
AVG. DRAWER LOAD CAPACITY
45 KG (90 LB)
MTB-505 Drawer Portable Workstation
Double wall steel construction
Heavy duty side handle
Centralized locking system
Self locking ball bearing
drawer slides
Castors feature 2 fixed and 2 swivel
with toe lock
21
FEATURES
For complete range of portable workstations, refer to the GROZ ‘Workshop Tool Catalogue’ - pg 68 - 71
-
[email protected] 2323
Multi-purpose toolbox for professional user and DIYer
Polypropylene box with corrosion resistant Aluminium handle
Strong anti-rust metal latch
Pad-lock enhances security when not in use
Top tray with 3 compartments and transparent cover for easy identification and organization of small tools, nuts, and bolts.
Comes with removable tray inside
Larger lower compartment for safe storage of tools like hammers, drills, lubricants, etc.
PlasticTool Box
ORDERING INFORMATION
FEATURES
CATNR.
ORDNR.
DIMENSIONS(LXWXH)
(INCH) (MM)
PTB/22 40030 22-3/64 × 11-13/16 × 10-29/32 560 × 300 × 277
PTB-22
For safe storage of tools*Tools not included
LOADCAPACITY
16KG(35LBS)
Top Tray
Aluminium Handle
TransparentCompartment
Pad Lock(not included)
22
-
www.groz-tools.com24
ORDERING INFORMATION
Heavy Duty Wrecking Bar for the professional user
Manufactured from high quality forged alloy steel
I Section steel bar, fully hardened & tempered for added strength and durability. Will withstand heavy loads without deformation
Low profile claw fits securely under the work-piece giving larger prying power
Wide & thin profile of claw permits easy insertion under the surface
Large bar to claw angle for 2X leverage and convenient use near work surface
CAT NR.
ORD NR.
OVERALL LENGTH SECTION
(INCH) (MM) (INCH) (MM)
GBR/14 33185 14 356 1/2 × 19/32 12 × 15
GBR/24 33186 24 610 5/8 × 1-3/16 16 × 30
GBR/36 33187 36 914 5/8 × 1-3/16 16 × 30
GBR/48 33188 48 1220 5/8 × 1-3/16 16 × 30
G-Bar®Heavy Duty Wrecking Bar
x
Regular wrecking bar claw angle prevents use near flat surfaces
Larger bar-to-claw for 2X leverage & convenient use near surface
Low & thin profile for easy fitment under the surface
23
Groz Engineering Tools (P) Ltd.Groz Net Industries
Village Kherki Daula, National Highway-8Gurugram -122001, Haryana, INDIATEL +91.124.282.7700 / 221.4050FAX +91.124.2827986 / 221.4224FAX (USA) +1.509.271.7848FAX (UK) +44.870.121.1854E-MAIL [email protected] www.groz-tools.com
The GROZ name, GROZ logo and the mark are trademarks of Groz Engineering Tools (P) Ltd., India
V slot in the claw for pulling out nails
For additional range of wrecking and construction bars, refer to the GROZ ‘Workshop Tool Catalogue’ - pg 157
The information contained in this catalogue is as accurate as possible and complies, as far as possible with existing regulations at the time of it’s publication – October 2019. We therefore reserve the right to make modifications in line with modifications to regulations and/or product specifications, drawings, illustrations for continual improvement. Buyers must ensure that goods are suitable for the purpose intended. Imperial dimensions shown as equivalents to metric and vice-versa are approximate.