wps (1)1
DESCRIPTION
DTRANSCRIPT
![Page 1: WPS (1)1](https://reader035.vdocument.in/reader035/viewer/2022072004/563dbb83550346aa9aadd977/html5/thumbnails/1.jpg)
WELDING PROCEDURE SPECIFICATION WPS No.: 13-OPV-09
(WPS) Sust. PQR No.:
Date: 10/7/2009
WPS Revision No.: 001
PRODUCCION DEPARTAMENT (SPECIFICATION - RULE) PAG 1 OF 2
WELDER AND CUTTING DIVISION F-DEPRO-26-01
OWNER: ARC PROYECT: ARC OFFSHORE PATROL VESSEL, OPVWELDNIG PROCESS: FCAW TYPE: SEMI-AUTOMATIC
TYPE OF JOIN TO WELDING: TYPE OF JOIN (Details) :
Type of material : N/A
Groove angle: N/A____________________
POSITIONS:
Direction of avance: Overhead
Other: N/A
BASE METALS: SHIELDING:
Gas : CO2__________________________________
Material specification: ASTM A131 GR AH32 to A131 GR AH32 Flow rate : 40 - 45 cfh_____________________________________
Composition: CO2 100%_________________________
Other: __N/A
FILLER METAL:DESCRIPTION PASS NUMBER (MULTIPASS)
1 2 o/sGL quality grade 3YH10S 3YH10SNo. Of specification SFA AWS 5.20 AWS 5.20
No. Clasification AWS E 71T-1C/9C E 71T-1C/9C
No. F 8 8
No. A 1 1
Made by LINCOLN ELECTRIC LINCOLN ELECTRIC
Electrode diameter 0,045" 0,045"
Amount of filler metal (Kg/h) 2,75 - 9,11 2,75 - 9,11
Fundent N/A N/A
Inserto consumible N/A N/A
Others. (Comercial mark) LW-71 LW-71
No. Pass Process Corriente Velocity of OTHER
Class Inductance Amperage Polarity Range of avance
(Amp) Voltage (mm/min)
1 (Raiz) FCAW DCEP N/A 220 - 230 Inverse (+) 25 - 26 7 - 10 -------
2 (Presentación) FCAW DCEP N/A 220 - 230 Inverse (+) 25 - 26 7 - 10 -------
Type of join: FILET WELD
Backing Yes _____ No __X____
Root face: N/A___________________________
Root opening: _2 to 3 mm______________________
Welding positions: 4F
P No. __9____ Gr. No. __2____ to P No. __9____ Gr. No. ___2___
Material Thickness: ______8 mm________ to _____8 mm_________
Diameter range: _____N/A__________ to _____N/A_________ Backrest Gas: N/A___________________________________
Flow rate : N/A______________________________________
Composition: N/A__________________________
![Page 2: WPS (1)1](https://reader035.vdocument.in/reader035/viewer/2022072004/563dbb83550346aa9aadd977/html5/thumbnails/2.jpg)
WELDING PROCEDURE SPECIFICATION WPS No.: 13-OPV-09
(WPS) Sust. PQR No.:
Date: 7/23/2009
WPS Revision No.: 001
PRODUCCION DEPARTAMENT (SPECIFICATION - RULE) PAG 1 OF 2
WELDER AND CUTTING DIVISION F-DEPRO-26-01
PREHEATING: THERMICAL TREATMENT:
Mín. Temp. : Ambient
Max. temp. Of interpass : 93ºC
Temp. Of thermal treatment: N/A
Conformation Temp.: Ambient
Temp. Of root pass: Ambient
Heating By: Torch N/A
EQUIPMENT:
Class: Estatic Diameter: N/A
Longitud: N/A
Mode of the material transfer FCAW : Short Circuit Spray Globular
Others: N/A
TECHNICAL IMPLEMENTATION
DESCRIPTION PASS NUMBER (MULTIPASS)1 2 o/s
Nozzle size 5/8" 5/8"
Cordon continuous X X
Cordon swung or rectum SWUNG SWUNG
Manual, Semiautomatic mode SEMI-AUTOMATIC SEMI-AUTOMATIC
Martilleo (Peening) N/A N/A
Form of endorsement N/A N/A
Method of removing the backing N/A N/A
Length of the point of contact work and tube 18-22 mm 18-22 mm
Pass simple or multiple MULTIPASS MULTIPASS
Clean and initial interpases PULISH PULISH
Speed application (in/min) 7 - 10 7 - 10
Others N/A N/A
APPROVED BY: NOTES:
1. Keep the welding electrodes in the furnace
Information X 2. Do not the welding prosess under rain
Qualification 3. The working area must be clean free from wind and humidity.
Fabrication X
By: TF CAMILO GÓMEZ Date: 7/23/2009
WELDING DIVISION BOSS
Type : _______N/A_____________________________________
Star Temp. : _____N/A___________________________
Heating Rate : ______N/A_______________________
Holding Temp. : _________N/A__________________
Holding time : _________N/A__________________
Temp. filling: N/A Cooling Rate : ________N/A_______________________
Mode of cooling: _________N/A_____________________
Type: Rectificador -Transformador
Class A.W.S. of Tungsten : N/A
Usae only in: UNLIMITED_________________
X