wrapshield sa self-adhered details.pdf · [inside isometric] drawn by: 23.09.2012 vaproflashing sa...

WrapShield SA Self-adheredWRB/AB field membrane

Outboard Vapor - Pemeable Insulation

Gasketed Fasteneror Dow 758 Sealed

Brick Tie must beFlush and compressedagainst Membrane withno prong penetrations

Always check www.vaproshield.com for the latest details and installation instructions

AFG

DESCRIPTION:

WrapShield SA with VaproLiqui-Flash and VaproFlashing SA (Self-Adhered) creates a complete air barrier membrane over gypsum or plywood sheathing, concrete, and CMU blocks.DATE:

VaproShield LLC | 915 26th Ave. N.W. Suite C5 | Gig Harbor, WA 98335 | Toll Free: 1.866.731.7663 | www.VaproShield.com | ©VaproShield 9/2012 VaproShield Canada | 101-1001 West Broadway Suite 545 | Vancouver, B.C. V6H 4E4, Canada | Toll Free: 1.866.871.8263 | www.vaproshield.ca

A Vapor permeable, weather-resistive, air barrier self-adhered membrane with VaproLiqui-Flash vapor permeable, liquid applied flashing system.

WrapShield SABrick Tie

Penetration

23.09.2012DRAWN BY:

CMU, Concrete, or Sheathing in

"as new" condition

Air Gap BehindCladding

Outboard Vapor - permeable insulation


shingled over flashing3" Overlap

Vertical Seams

Flashing(by others)

VaproFlashing SAShingled under

Flashing andover Roofing

Membrane

WrapShield SALaps over Flashing

Roofing Membrane(by others)


AFG

DESCRIPTION:




WrapShield SA Low Roof

to Wall Detail

23.09.2012DRAWN BY:

For Larger Penetrations, use VaproLiqui-Flash

tooled at least 2" onto the face and 2" out along all sides of the penetration

Apply VaproLiqui-Flashto complex penetrations[i.e. structural elements]tooled evenly at least 2"

onto the face and at least 2" out along all

sides of the penetration

Apply and lightly tool Dow 758 Sealantaround smaller penetrations

up to 1" in Diameter

Apply sufficient Dow 758 Sealant to completely

seal fastener penetrations

OK to apply VaproLiqui-Flash

to damp substrate

Gasketed FastenersRequire no additionalSealing

2"

2"

2"

2"


AFG

DESCRIPTION:




WrapShield SA Penetrations

23.09.2012DRAWN BY:

VaproFlashing SA WRB/AB Self-adhered Flashing

shingled over Field Membrane

Sheathing in "as new" condition

Parapet Cap(by others)

High-temp Roof FlashingProperly Shingled

(by others)


Dow 758 SealantAs needed


AFG

DESCRIPTION:




WrapShield SA Parapet Detail

[Inside Isometric]

23.09.2012DRAWN BY:

VaproFlashing SA WRB/AB Self-adhered Flashing

shingled over Field Membrane


Parapet Cap(by others)

High-temp Roof FlashingProperly Shingled

(by others)


VaproBattens Black 1/2"

Dow 758 SealantAs needed

WrapShield SASelf-Adhered WRB/ABField Membrane RollInstalled vertically

Flashing perCladding mfr.


AFG

DESCRIPTION:




WrapShield SA Parapet Detail

[Outside Isometric]

23.09.2012DRAWN BY:


WrapShield SA WRB / AB Field Membrane

WrapShield SA WRB / AB Field Membranelap onto thru-wall flashing [by others] min. 3"

VaproFlashing SA with VaproLiqui-Flashlap 3" min. onto horiz. surface;

seal with Dow 758 Sealant and backer rod where prudent


VaproBatten Rain Screen Batten System


AFG

DESCRIPTION:

WrapShield SA with VaproLiqui-Flash and VaproFlashing SA (Self-Adhered) creates a complete air barrier membrane over gypsum or plywood sheathing, concrete, CMUs, etc..

DATE:



WrapShield SA Change in Plane

10.10.2014DRAWN BY:

in "as new" condition


AFG

DESCRIPTION:


DATE:



WrapShield SA Change in Substrate

10.10.2014DRAWN BY:

VaproFlashing SA or WrapShield SA6" lap around perimeter of damage

Dow 758 Sealant tooled @ top edge of reverse lap


AFG

DESCRIPTION:


DATE:



WrapShield SA Damage / Defects

10.10.2014DRAWN BY:

Substrate in "as new" conditionmortar joints struck flush


Backer rod [by others]size determined by

building envelope consultant

WrapShield SA or VaproFlashing SA 2 layers / min. 3" lap past joint


AFG

DESCRIPTION:


DATE:



WrapShield SA Deflection Joint

10.10.2014DRAWN BY:

WrapShield SA Self-Adhered WRB/AB Field Membrane

lap onto VaproFlashing SA min. 3"

Substrate in "as new" condition

VaproFlashing SA 11.75" with "loop"adhere 3" strip to center of WrapShield SA

to back side: adhesive to adhesive

Plan View (NTS)


AFG

DESCRIPTION:


DATE:



WrapShield SA Expansion or

Contraction Joint

10.10.2014DRAWN BY:

VaproLiqui-Flash @ inside Rough Opening + 2" on face

monolithic and continuous

VaproFlashing SA properly shingled; applied directly to sheathing + folder 2.75" inside of R.O.

lapped over "Apron" and sealed



shingled over flashing+ Nail-Flange @ head/jambs

Head flashing by othersover VaproLiqui-Flash

Nail Flange Window:flanges sealed to cured

VaproLiqui-flash w/ Dow 758Sealant - ⅜" min. bead

@ jambs and head only interior backer rod and

sealant by others

U-Shims for drainage behind nail flange at sill

per window mfr. instructions

WrapShield SA "Apron"


AFG

DESCRIPTION:




WrapShield SA Nail-Flange

Window DetailIntegrated

02.21.2013DRAWN BY:

Substrate in "as new" condition

SlopeShield SA lap onto flashing and/or ice & water shield

ice & water shield / flashing withbutyl , acrylic, or hybrid adhesive

WrapShield SA WRB / AB Membrane lap min. 3"

in shingle fashion at all seams


AFG

DESCRIPTION:


DATE:



WrapShield SA Roof to Wall

10.10.2014DRAWN BY:


Joints >⅜" require backing


AFG

DESCRIPTION:


DATE:



WrapShield SA Substrate Joints

10.10.2014DRAWN BY:


VaproFlashing SA or WrapShield SA3" lap adhere to foundation


AFG

DESCRIPTION:


DATE:



WrapShield SA Wall to Foundation

10.10.2014DRAWN BY:

wrapshield sa self-adhered details.pdf · [inside isometric] drawn by: 23.09.2012 vaproflashing sa...

Documents