written by: ben barber - the-eye.eu guides/canon... · canon ae-1 film rewind crank replacement it...
TRANSCRIPT
Canon AE-1 Film Rewind Crank ReplacementIt is possible after use or damage that the film rewind crank could become damaged or broken.
This guide will give you the steps needed to replace the film rewind crank.
Written By: Ben Barber
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
TOOLS:Phillips #00 Screwdriver (1)
Flathead 3/32" or 2.5 mm Screwdriver (1)
PARTS:Replacement film rewind crank (1)
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Film Rewind Crank
Open film door
Place screwdriver in slot as shown
Step 2
Use screwdriver to prevent shaftfrom turning
Rotate crank counter clockwise toremove crank
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
To reassemble your device, follow these instructions in reverse order.
Step 3
Remove the two screws
Remove silver pate
Step 4
Remove film rewind crank
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
This document was last generated on 2017-06-21 09:05:33 PM.
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5