WELDING SCREEN FRAMEMODEL NO: WSC2

PART NO: 6000945

USER INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC 0620 - ISS 4

P

INTRODUCTIONThank you for purchasing this CLARKE Welding Screen Frame.

Use this screen for face, eye and general protection against harmful rays, sparks and splatter from welding and cutting.

Additional WSC2 screens can be added by using the connecting tubes supplied.

Please follow the instructions given. In doing so you will ensure the safety of yourself and that of others around you and you can look forward to the product giving you long and satisfactory service.

GUARANTEEThis product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTIONDo not dispose of welding products with general household waste. They contain valuable raw materials and should be disposed of appropriately at a recognised disposal facility.

GENERAL SAFETY WARNINGS1. DO NOT place so close to the welding operation that the screen is

constantly exposed to excess heat /sparks or allow the screen to come into contact with hot surfaces. DO NOT use if the screen is torn or split.

2. When welding indoors ensure there is adequate ventilation.

3. NEVER look at an electric arc without protection. A welding headshield or helmet with appropriate lenses must be used when welding. All persons present must always use a proper welding face shield with suitable lenses.

4. After welding, always check that the area is free of any sparks or glowing embers.

5. When necessary, use identical replacement parts to ensure that the safety of the product is maintained.

2arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

COMPONENT PARTS

SPECIFICATIONS

A Top/bottom tubes 2

B Top corner tubes 2

C Bottom corner tubes 2

D Side tubes 2

E Welding screen connecting tubes 2

F Base supports 2

G Castors (2 with parking brakes) 4

H Wingnuts 2

J Castor domed nuts 4

K Welding screen 1

Weight 5.35 kg

Dimensions (D x L x H) 660 x 1795 x 1965 mm

3arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

ASSEMBLY1. Connect the top/bottom tubes (A) to the corner tubes (B & C), noting that

the limb of (C) must point downwards.

• The spring-loaded pins on the tubes will spring into place for security.

2. If required, for creating a fence of screens, slide the welding screen connecting tubes (E) onto the side tubes (D) until they rest against the lower of the two spring loaded pins.

3. Join the side tubes (D) to the corner tubes (B & C) to complete the frame.

4. Connect the bottom corner tubes (C) to the base supports (F) and secure by tightening the wingnuts (H).

5. Fit the castors (G) to the base supports, securing them with the domed nuts (J). Lock in position using a 13mm wrench on the caster locknut and a 14mm wrench on the dome nut.

6. Attach the welding screen (K) to the frame using the cable ties supplied.

7. Take care to attach all the cable ties from the same side and initially connect loosely before tightening them equally all around the screen.

8. The welding screen may be prevented from moving by applying the brakes on one pair of casters. Press down with your foot on the brake levers to apply the brakes. Lift the lever up to release

4arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com