UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn

Fuse Service Equipment

Fused Multi Service PillarsRated 240/415V

Ideal for the management of fusedconnections where isolation of the supplycan be controlled remotely from the user.

Suitable for all LV distribution Networks.Particularly suitable for any applicationwhere multiple connections are required toa number of proximate outlets.

Typical applications include:• Groups of domestic housing• Holiday homes and parks• Mobile and static Caravan parks• Agricultural and animal housing

Central to the design are our wellestablished range of Series 7 HouseService Cutouts, which can be fused from100A downwards.

The design incorporates a lift-off GRP coverwhich is largely unobtrusive in rural areas.

We have a choice of 2 designs.

1) 4-way triple-pole-and-neutral (12-waysingle-pole-and-neutral).

2) 6-way triple-pole-and-neutral (18-waysingle-pole-and-neutral).

Service fuses are mounted in three single-phase banks with a multi-way neutralconnector block below and accept up to35mm² copper or aluminium conductors.

Providing a safe and reliable low voltage supplyto rural dwellings is easy with our choice ofmulti service pillar designs

• Reliable and safe method ofsupply/isolation.

• Simple design and easily installed.

• Suits CNE or SNE type cables.

• Tough ‘easilift’ GRP cover,unobtrusive in rural areas.

• Choose between 60/80 or 100Arating, using our own BS approvedSeries 7 Cutouts.

• Tough concrete root/plinth minimisescorrosion problems at ground level.

WT Henley Church Manorway, Belvedere, Erith, Kent DA8 1EX ENGLANDA Division of Sicame UK LimitedTelephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: sales@wt-henley.com - Website: www.sicameuk.co.uk

Registered office: Church Manorway, Erith, Kent DA8 1EX United Kingdom - Registration No 3319466 VAT Registration No GB 683822508

14688 Multi Service Pillars:Layout 1 7/2/14 09:19 Page 1

Please note: When selecting fuse carriers12 are required for a 4-way unit18 are required for a 6-way unit

UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn

Fuse Service Equipment

58134-16 4-way Triple-Pole-and-Neutral (Excluding Carriers)

58134-88 6-way Triple-Pole-and-Neutral (Excluding Carriers)

54365-04 60/80A Fuse Carriers (excluding fuse-links)

54365-22 `100A Fuse Carriers (excluding fuse-links)

Dimensions in mm

Detail 4-way 6-way

Overall height above ground 920 920

Height of GRP cover only 640 640

Concrete base 280 280

Nominal depth of concrete in ground 380 380

Total height including root section 1300 1300

Maximum width of Pillar 358 461

Maximum depth of Pillar 334 334

Fixing centres of root 378 378

Fuselink to suit 60/80A Carrier. BS HD 60269-3 2010

16 x 22 x 57mm 16 x 30 x 57mm

30A 58332-04 30A 58332-06

60A 58333-07 60A 58333-11

80A 58334-08 80A 58334-04

100A 58334-09 100A 58334-06

Approximate Gross Weight (inc root) kg

4-way 91

6-way 113

Pillar and Carrier Selection Chart

Accessories

General Note: The equipment in this publication should be installed by a suitably qualified person. Sicame UK Limited reserves theright to make changes in product specification without notice or liability. All information is subject to Sicame UK’s own data and isconsidered accurate at time this document was created.

© 2014 Sicame UK Limited. All rights reserved. No part of this document may be copied or reproduced in whole or in part without prior writtenapproval of Sicame UK Limited.

14688 2014-02-01

14688 Multi Service Pillars:Layout 1 7/2/14 09:19 Page 2