www.fall-protection.com multirail horizontal anchorage device

www.fall-protection.com

MultiRailMultiRail Horizontal Anchorage DeviceHorizontal Anchorage Device



Anchorage Devices

Söll MultiRail is a fixed horizontal anchorage device, which Söll MultiRail is a fixed horizontal anchorage device, which functions/works on a rail basis, designed and tested to DIN functions/works on a rail basis, designed and tested to DIN EN 795 - Class D.EN 795 - Class D.

Söll MultiRail rail systems can be installed along the entire Söll MultiRail rail systems can be installed along the entire unprotected work area and offers higher safety. unprotected work area and offers higher safety.

It offers the advantage of greater fixing distances (up to 6 m) It offers the advantage of greater fixing distances (up to 6 m) and can be used by more people at the same time (up to 6).and can be used by more people at the same time (up to 6).

Only few components are necessary. Only few components are necessary. The gliders slide smoothly on the rail following the user.The gliders slide smoothly on the rail following the user.

MultiRail Animation.swf


Storefronts Flat roofs or steep roofs Working platforms

on masts and buildings Hangars Shipyards, cranes etc. Industrial plants

Loading stations Wastewater/sewage plants Adventureparcs

The most common applications of MultiRail are:


System Components

MultiRail

Made of pickled stainless steel, available in fixed lengths of 6 m.Also curved, with radius > 2000 mm for rail mounted in either upwards or sidewards orientations.

Connector

Coupling part made of anodized Aluminium, to connect individual rail sections.


System Components

End-stop

Made of pickled stainless steel and anodised Aluminium. It serves as an end anchorage to prevent the glider from running out unintentionally.

End-stop with exit

Made of pickled stainless steel and anodised Aluminium. Serves as an end anchorage and can be opened to remove the glider.


System Components

Supports

Available in several types.

Made of pickled stainless steel with Teflon inserts.

The rail glides smoothly in the brackets and is not subject to any constraint.


System Components

Corners - upwards & sidewards Made of anodised Aluminium, these

components allow MultiRail to follow the profile of the building. The radius is 80 mm with a standard angle of 90°.

Other angles between 30° and 150° are available on request.

Horizontal Track Change The T-Junction allows several rail

systems to be connected and used seamlessly. This function is available exclusively on the MultiRail system.


The Closed Glider

It is the most convenient solution, it can be removed from the system at the end-stop with exit sections or remain permanently on the rail.

For use where there are only a small number of MultiRail systems and where the systems have defined entry and exit points.

Made of pickled stainless steel with polyamide inlays, it is also fitted with a stainless steel connector. As wheels are not necessary, it is dirt-resistant as well as very light, only 400 g.


The Openable Glider

For use where there are several MultiRail systems or where the systems do not have defined entry and exit points.

Made of pickled stainless steel with polyamide inlays, it is also fitted with a stainless steel connector.

By means of an easy to use opening and closing mechanism, it can be removed or attached anywhere along the rail offering more flexibility to the user during his work. Also it is very light, just 600 g.


The new Wheeled Runner

Made from pickled stainless steel with 4 load-bearing wheels and a swivelling stainless steel eye.

This runner may only be used for overhead applications. The runner can now pass horizontal curves.

It can be used with a retractable type fall arrester, increasing the size of the protected work area.

For use where the user works beneath the MultiRail System at varying heights.


Approval

The Söll-MultiRail-System has been tested and approved by an independent institute (0158).

The Söll-MultiRail-System complies with the requirements of CE norm EN795 Class D (certified).


Easy to handle System

The gliders slide smoothly on the rail following the user

Available with/in 3 different gliders

To be assembled at foot level on a wall or overhead

Only few components are necessary

The closed profile makes the product more resistant against the accumulation of dirt


Easy to install

Big fixing distances up to 6 m reduce the assembling work The rail is not fixed into mounting brackets, herewith,

thermal expansion is compensated for The use of the low friction mounting brackets means that

in the event of a fall the absolute minimum impact will be transmitted to the structure

Horizontal and vertical installation of the rail enables a greater variety of applications

Pre-constructed corner sections allow the system to be easily customized to a structure

The standard length of the rail is of 6m, this enables a quick assembling and cost saving, as few connecting parts are needed

Bended rails with a radius of > 2000 mm are also available


Robust

Can be used by up to 6 persons at the same time The rail can absorb forces up to 100 kg without permanent

deformation Made of stainless steel for the toughest environmental

conditions The energy caused by the fall is absorbed by the bending

of the rail, thereby the structure remains protected


SPERIAN FALL PROTECTION SPERIAN FALL PROTECTION Deutschland GmbH & Co. KGDeutschland GmbH & Co. KGSeligenweg 10, D-95028 HofSeligenweg 10, D-95028 HofTel.: +49 9281 8302 0 Tel.: +49 9281 8302 0 Fax.: +49 9281 3626Fax.: +49 9281 [email protected]@sperianprotection.com

www.multirail.euwww.multirail.eu

MultiRailMultiRail

www.fall-protection.com multirail horizontal anchorage device

Documents

sll multirail rail systems

pickled stainless steel

system components multirail

stainless steel connector

system components end

rail basis

rail glides

end anchorage