【X-431Remote Diagnose】2006Audi Q3 Expected maintenance value prompt reset operation method

Actual Measurement：

Audi Q3，2006，VIN=LFV3A24F7630*****，see pic1.

Function Description:

When the audi instrument prompt maintains or does not currently maintain the prompt data, as shown in figure 2, you need to maintain the vehicle and set the expected maintenance value using the X431 decoder.

Note:

1.Switch on the ignition; 2.Keep the battery voltage more than 12V; 3.Executing in a good WIFI condition. Otherwise, it will cause abnormal when diagnosing. 4. Enter the diagnostic program to click on the menu - I - my friend - add buddy - request remote assistance or request to control the device.

Operation Instruction:

1.Choose Audi V27.70 above; 2.Choose special function; 3.Maintenance zero; 4.Choose[zero-automatic]，see pic3；

pic3

5According to the need, select the oil return to zero (minor maintenance) and zero maintenance, as shown in FIG. 4. Click here to go to zero (small maintenance).

pic4

6. 【 automatic Settings 】 options can directly select the usual maintenance mileage date, [manual customization] can be customized according to the customer's needs. [automatic Settings] : select [manual arbitrary setting] here, as shown in FIG. 5;

7. Select the EIS to maintain the mileage next time;

pic5

8. The input needs to set the next maintenance number such as 8500 and click ok, as shown in figure 6;

pic6

9. The input needs to be set the next maintenance days like 180 and click ok, as shown in figure 7;

pic7

10. Please indicate that the oil return to zero (minor maintenance) is zero success, otherwise, please execute the EIS reset, and click ok, as shown in figure 8.

pic8

11. Return to select (maintenance); 12. Select "manual arbitrary Settings", as shown in figure 9;

pic9

13. The input should be set after the next maintenance number such as 60000, and then click ok, as shown in figure 10;

pic10

14. Enter the next maintenance days like 720 and click ok, as shown in figure 11;

pic11

15Manual arbitrary setting of the result prompt: the maintenance of zero success, otherwise please perform the EIS reset. Click ok, as shown in figure 12;

pic12

16. Return click [activate maintenance prompt]; 17. Suggested 10 channel matching successfully click ok, as shown in figure 13;

pic13

18. Turn off the key and open the key again. The instrument will return to normal and the next expected maintenance setting will be successful. Check if the above steps have an exception Engine and related system failure code, troubleshooting failure code to repeat the above steps! 。