Xitanium

LED driver

Datasheet

Xitanium LED drivers – spot- and downlight SELVXitanium 50W LH 0.7-1.5A 48V I 230V

Enabling future-proof LED technologyXitanium LED drivers are designed to operate LED solutions for general lighting applications. Reliability is enhanced by features that protectthe connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central DC operation. In thecoming years LEDs will continue to increase in efficiency, creating challenges for OEMs. With Xitanium LED drivers, flexibility in luminairedesign is assured thanks to an adjustable output current. Application-oriented operating windows offer stable lumen output and light qualitylevels that specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions fromdifferent manufacturers.

Benefits• High reliability underpinned by 5 year

warranty• Future-proof flexibility -

application-oriented operatingwindows enable LED generation andcomplexity management

• Compatibility - can also be used forother manufacturers' modules orOEMs' own PCB designs

Features• Operating windows - output current

can be adjusted via the PhilipsMultiOne configurator ('TD' drivers)or with a resistor outside the driver

• Hot wiring, reduced ripple currentand thermal derating for increasedreliability

• Multiple versions - DALI dimmable &programmable, trailing-edge dimmable,fixed-current/fixed-outputtrailing-edge dimmable, fixed-output,and fixed-current/fixed-output

• Power ratings: 10-110 W• Choice of housing designs - linear

housing for tracks in '3 in 1' in design,conventional HID housings for down-and spotlighting, and SH housing forindependent use with strain relief andloop through

Applications• Retail

May 2015

Electrical input data

Specification item Value Unit ConditionNominal input voltage 220...240 Vac

Nominal input frequency 50...60 HzNominal input current 0.27 A @230V @ full loadInput voltage 230 Vac full loadNominal input power 59 W @230V @ full loadPower factor ≥ 0.9Total harmonic distortion ≤ 20 %Efficiency 88 % @230V @ full loadNominal input voltage DC 186...250 Vdc

Nominal input current DC 0.32 A Input voltage 230 Vdc, full loadInput voltage AC 202...254 Vac Performance rangeInput frequency AC 47.5...63 Hz Maximum permissible range

Electrical output data

Specification item Value Unit ConditionRegulation method Constant CurrentOutput voltage 24...48 Vdc

Output voltage max. 60 V Peak voltage at open loadOutput current 0.7...1.5 A Full output current settingOutput current tolerance ± 5 %Output current ripple LF ≤ 4 % Ripple = peak / averageOutput power 17...50 W Full output

Electrical data controls input

Specification item Value Unit ConditionControl method Fixed

Logistical data

Specification item ValueProduct name Xitanium 50W LH 0.7-1.5A 48V I 230VOrder codeLogistic code 12NC 9290 009 34706EAN3Pieces per box 10

2 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015

Wiring & Connections

Specification item Value Unit ConditionInput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire

16...24 AWG WAGO250 (3.5 mm), solid wireInput wire strip length 8.5...9.5 mmOutput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire

16...24 AWG WAGO250 (3.5 mm), solid wireOutput wire strip length 8.5...9.5 mmMaximum cable length 600 mm Total length of wiring including LED module, one way

Dimensions and weight

Specification item Value Unit ConditionLength (A1) 190 mmWidth (B1) 46 mmHeight (C1) 32 mmFixing hole diameter (D1) 4.2 mmFixing hole distance (A2) 154 mmWeight 206 gram

3 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015

Operational temperatures and humidity

Specification item Value Unit ConditionAmbient temperature -20...+45 ºCTcase-max 90 ºC Maximum temperature measured at Tc-pointTcase-life 80 ºC Measured at Tc-pointMaximum housing temperature 110 ºC In case of a failureRelative humidity 10...90 % Non-condensing

Storage temperature and humidity

Specification item Value Unit ConditionAmbient temperature -25...+85 ºCRelative humidity 5...95 % Non-condensing

Lifetime

Specification item Value Unit ConditionDriver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life.

Maximum failures = 10%

Programmable features

Specification item Value Remark ConditionSet output current (AOC) LEDset and SimpleSet See Design-in guide.

Default output current: ≤ 0.7 ALED module temperature derating (MTP) NoConstant Lumen Over Lifetime (CLO) NoDC emergency dimming (DCemDIM) No Current output decreased to 15%Corridor mode NoEnergy metering NoDiagnostics No

Features

Specification item Value Remark ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection Yes Automatic recoveringHot wiring YesSuitable for fixtures with protection class I and II

Certificates and standards

Specification item ValueApproval marks CE / ENECIngress Protection classification 20

4 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015

Note: For better EMI performance, functional earth connection should be provided for built-in applications.

For built-in applications, an ambient temperature of -20...+55 ºC can be used.

Inrush current

Specification item Value Unit ConditionInrush current Ipeak 23.5 A Input voltage 230VInrush current Twidth 272 µs Input voltage 230V, measured at 50% Ipeak

Drivers / MCB 16A type B ≤ 24 pcs

MCB Rating Relative number of LED driversB 10A 63%B 13A 81%B 16A 100% (stated in datasheet)B 20A 125%B 25A 156%C 10A 104%C 13A 135%C 16A 170%C 20A 208%C 25A 260%

Driver touch current

Specification item Value Unit ConditionTypical touch current 0.7 mA peak Acc. IEC61347-1. LED module contribution not

included

Surge immunity

Specification item Value Unit ConditionMains surge immunity (diff. mode) > 1 kVMains surge immunity (comm. mode) 2 kV

Additional information

Specification item Value Unit ConditionAOC 0 mACLO 0 %

5 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015

Graphs

Operating window

Power factor versus output power

Efficiency versus output power

6 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015

THD versus output power

©2015 Koninklijke Philips Electronics N.V.

All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The informationpresented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed withoutnotice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights. Data subject to change.

Date of release: May 21, 2015

www.philips.com/xitanium