xk09-plxr en ig cp20101220a - microsoft · update alert: firmware updates are posted to the web on...

Immobilizer Bypass module designed to bypass all GM vehicles equipped with Passlock I, Passlock II, VATS, and the new-style Passlock Immobilizer found in Buick, Cadillac, Chevrolet, Hummer, Isuzu, Oldsmobile, Pontiac and Saturn vehicles.

Vehicle Application Guide............................................................................................................................................

InstallationType 1..........................................................................................................................................................................Type 2..........................................................................................................................................................................Type 3..........................................................................................................................................................................Type 4..........................................................................................................................................................................Type 5..........................................................................................................................................................................Type 6..........................................................................................................................................................................

ProgrammingProgramming the Module............................................................................................................................................Resetting the Module..................................................................................................................................................

Important Installation Notes.........................................................................................................................................

Module LED Diagnostics.............................................................................................................................................

Warranty................................................................................................................................... ....... ...................... ..... .

02

040506070809

1011

12

13

14

Index

TECHNICAL SUPPORT / INFORMATION

web resources:www.xpresskit.com

www.xpressvip.com

www.directechs.com† Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac and Saturn are registered trademarks and property of their respective companies.

Installation Guide

Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

Rev.: 20 201012

Platform: XK09Firmware: PLXR

© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems

Embedded EPS

There is embedded EPS on this page. Adobe Acrobat does not support the display of this type of object but it will print intact to a PostScript device.

Vehicle Application Guide

Vehicles

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

PK

-Im

mo

bili

ze

rB

yp

as

s-

Da

taN

oK

ey

Re

q'd

Buick Legend:

Century 4 4 4 4 4 4 4 4 4 4 4 4 4 • � í ╜ŉś�Ċ◘�í ╜ŉś �í íو ت � 5ĂĊĂ�Ċ◘�5ĂĊĂ �55و�

LeSabre 4 4 4 4 4 • PK: Transponder & Immobilizer Override

Park Avenue 4 4 4 •

Regal 4 4 4 4 4 4 4 4 4 4 •

Riviera 4 4 4 4 4 4 •

Roadmaster 4 •

Skylark 5 5 5 •

Cadillac

Allante 4 4 4 •

Brougham 4 4 4 4 4 4 4 •

Concours 4 4 4 4 4 4 •

DeVille 4 4 4 4 4 4 4 4 4 4 •

Eldorado 4 4 4 4 4 4 4 4 4 4 4 •

Escalade 6 6 6 6 6 6 6 6 •

Fleetwood 4 4 4 4 4 4 4 •

Seville 4 4 4 4 4 4 •

Chevrolet

Astro 6 6 6 6 6 6 6 6 •

Avalanche 6 6 6 6 6 •

Blazer 6 6 6 6 6 6 6 6 •

Camaro 4 4 4 4 4 4 4 4 4 4 •

Caprice 4 4 4 •

Cavalier 6 6 6 6 6 6 5 5 5 5 •

Cobalt 1 •

Colorado 3 3 3 3 •

Corvette 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 •

Equinox 6 6 •

Express Van 6 6 6 6 6 6 6 6 6 6 •

HHR 1 •

Impala 6 6 6 6 6 6 •

Lumina Sedan 6 6 6 6 6 6 •

Malibu 6 6 6 6 6 6 6 •

Malibu Classic 6 6 •

Monte Carlo 6 6 6 6 6 6 6 6 6 6 6 •

S10 Pickup 6 6 6 6 6 6 6 6 •

Silverado 6 6 6 6 6 6 6 6 6 •

Silverado Classic 6 •

SSR 6 6 6 •

Suburban 6 6 6 6 6 6 6 6 6 •

Tahoe 6 6 6 6 6 6 6 6 6 •

TrailBlazer 6 6 6 6 6 6 6 •

GMC

Canyon 3 3 3 3 3 •

Envoy 6 6 6 6 6 6 6 6 6 6 6 •

Jimmy 6 6 6 6 6 6 6 6 •

Safari 6 6 6 6 6 6 6 6 •

Savana 6 6 6 6 6 6 6 6 6 6 •

Sierra 6 6 6 6 6 6 6 6 6 •

Sierra Classic 6 •

Sonoma 6 6 6 6 6 6 6 6 •

Yukon 6 6 6 6 6 6 6 6 6 •

Rev.: 20 201012



Embedded EPS


Vehicles

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

PK

-Im

mobilizer

Bypass-

Data

No

Key

Req'd

Hummer

H2 6 6 6 6 6 •

H3 3 3 3 •

Isuzu

Ascender 6 6 6 6 6 •

Hombre 6 6 6 •

i-280 3 3 •

i-290 3 3 •

i-350 3 3 •

i-370 3 3 •

Oldsmobile

Achieva 5 5 5 •

Alero 6 6 6 6 6 6 •

Aurora 4 4 4 4 4 •

Bravada 6 6 6 6 •

Cutlass 4 4 4 •

Cutlass Ciera 4 4 •

Cutlass Supreme 4 4 4 •

Eighty-Eight 4 4 4 4 4 •

Intrigue 6 6 6 6 6 •

LSS 4 4 4 •

Ninety-Eight 4 4 •

Regency 4 4 4 •

Pontiac

Bonneville 4 4 4 4 4 4 4 4 •

Firebird 4 4 4 4 4 4 4 4 4 4 •

Grand Am 6 6 6 6 6 6 6 5 5 5 •

Grand Prix 4 4 4 •

Pursuit 1 •

Sunfire 6 6 6 6 6 6 5 5 5 5 5 •

Torrent 6 •

Saturn

ION 2 2 2 2 2 •

Sedan Coupe 6 6 •

S-Series 6 6 6 6 6 •

VUE 6 6 6 6 6 6 •

Rev.: 20 201012



Embedded EPS


Installation 1(See the Vehicle Application Guide on page 2 to determine the installation type.)

Not required in D2D mode.

1 2 643 5

4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX

: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B

(-) GWR (status) Output

(+) Starter Output

(+) Ignition Output

(-) Neutral Safety (DEI Platforms Only)

(+) Accessory Output

Parking Lights

(+) 12 V Input

(-) Ground

9: Red: (+) 12 V Input

10: Black: Ground Input

15: Yellow: Resistor Code Output

16: Brown: Mux

12: Yellow/Black: Resistor Code Output

13: Violet/Brown: Mux

17: Orange: Resistor Code Input

8: Pink: (+) Ignition Input

7: Violet: (+) Starter Input

1: Blue/White: (-) GWR (status) Input

Front View

Pin

5, W

hite

Pin

2, R

ed/W

hite

Pin

3, Y

ello

w

Pin

4, B

row

n

Rev.: 20 201012



Embedded EPS




1 2 64 53

4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX




16: Brown: Mux



17: Orange: Resistor Code Input




Fro

nt V

iew

Pin

5, W

hite

Pin 4, Brown

Pin

2, O

range

Pin

3, B

lue



(+) Starter Output

(+) Ignition Output



Parking Lights

(+) 12 V Input

(-) Ground

Rev.: 20 201012



Embedded EPS




2 63 4 51

4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX




16: Brown: Mux



17: Orange: Resistor Code Input 2: -

Key Sense Output

1: -

4: -

3: Orange/Red: Key Sense Output




Fro

nt V

iew

Pin

4,

White

/Blu

e

Pin

3, W

hite

/Gre

en

Pin

2, W

hite

/Bla

ck

Connect Key ense Output the SWhite/ wire on Hummer H3 only.Blue



(+) Starter Output

(+) Ignition Output

The Key Sense Output wire must be connected to the

pin on the left of the third connector.XK09 black



Parking Lights

(+) 12 V Input

(-) Ground

Pin

1, W

hite

/Re

d

Rev.: 20 201012



Embedded EPS




4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX


Parking Lights

(+) 12 V Input

(-) Ground


10: Black: Ground Wire on VATS Connections


16: Brown: Mux






Connectionsfor VATS only

These white wires can be found in an orange, gray or black sleeve, originating from the ignition switch.


(+) Starter Output


(+) Ignition Output


+12VDC

Ignition Key

Rev.: 20 201012



Embedded EPS





4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX


10: Black: Ground Wire in Passlock Harness


16: Brown: Mux

White

Bla

ck

Yello

w







Bulb Test (Black 24ga Wire)

2: -

1: Violet Output/White: Bulb Test

4: -

3: -

BCM

Ignition Key


+12VDC

(+) Starter Output

(+) Ignition 2 Output(+) Ignition 1 Output

OR

Sid

e B

lack

Bla

ck/White

Mid

dle

Bla

ck


Parking Lights

(+) 12 V Input

(-) Ground

Rev.: 20 201012



Embedded EPS


(+) Starter Output


(+) Ignition 1 Output

(+) Ignition 2 Output



4

42

4

Programming Button

XK

09

Rem

ote

Sta

rter

1: (+) 12 V

2: RX3: (-) Ground

4: TX

20

(+) 12 VRX

(-) GroundTX


10: Black: Ground Wire in Passlock Harness


16: Brown: Mux

OR







BCM

White

Bla

ck

Yello

wY

ello

w

Red

/White

Ora

nge/B

lack

Ignition Key


+12VDC


Parking Lights

(+) 12 V Input

(-) Ground

Rev.: 20 201012



Embedded EPS


Module Programming

Types 1, 2 & 3 Types 4, 5 & 6

To save and exit the Passlock Selection Type, press and hold theProgramming button until the LED flashes once rapidly, and thenturns OFF.

Release the Programming button. The LED will turn ON solid again.

Press the Programming button 1, 2 or 3 times to select the Passlock Type. LED will flashrepeat the ing pattern corresponding to the selected programming type.

- = Press button (1 ) once.1: Types 4 & 5 x- = Press button (2 ) twice.2: Type 6 x- = Press button (3 ) three times .3: Types 1, 2 & 3 x (default selection)

* The system is preset for Types 1, 2 & 3.

&

&

&Press & Hold

Release

2

4

5

3

Connect the module:If the module has already been programmed, the red LED will flash the number of times corresponding to its programming type. and then it will turn OFF; if it has not been programmed, the LED will repeat the flashing pattern of the default programming type, which is 3 times.

1Once all the wires are properly connected, plug the wire connector into the module.

If connected in D2D:Connect the 4-pin D2D harness first, and then connect the 2 -pin harness. (The order is important.)0

If connected in W2W:Connect the 2 -pin harness.0

Caution! The 20-pin connector can be easily plugged in backwards.

4-pin

2 -pin0

Off

On Solid

Flashes Once

&Press N Times

=

=

ProgrammingRequired

No ProgrammingRequired&

&

Insert and turn the key it to the ON position.

ON

START

OF

F

KEY

Key at IGN6 Insert and turn the key it to

START .the engine

Press and hold the Programming button while the vehicle is running. The LED turns OFF, flashes once rapidly, then turns ON. The relay inside the module makes one clicking sound.

ON

START

OF

F

KEY

Key at IGN6

7

& &Press & Hold

Relay

Clicks OnceOff, Flashes

Once, On

Flashes n Times

Flashes xN

Flashes x3 Off

Off

Press and hold the Programming button while key is at the ON position. The LED turns OFF, flashes once rapidly, and then then turns ON. The relay inside the module makes one clicking sound.

7& &

Press & Hold

Relay

Clicks OnceOff, Flashes

Once, On

Rev.: 20 201012



Embedded EPS


The LED will turn OFF to indicate that the Passlock Resistor Code is now programmed into the module. Remove the key and t the feature est by remote starting he engine. t

Turn the key to the START position and hold it there. Press and hold the Programming button one more time.

The LED turns OFF, flashes once rapidly, and then then turns ON. The relay in the module will click once again.

8

9

Resetting the Module

& & Relay

Clicks Once

&Press & Hold

ON

START

OF

F

KEY

Start and HoldOff, Flashes

Once, On

1

2

3

Disconnect the module from any power source.

Press and HOLD the Integrated Programming Button (IPB).While holding the button, connect the module to the power source.

Wait until the red LED flashes quickly for 1 second and then turns OFF.Release the IPB. The module reset is complete. &

Release

Disconnect from Power

&Press & Hold Connect to Power

Flashes x1 Second

& &Remote StartOff

ON

START

OF

F

KEY

Remove Key

& &Remote StartOff

ON

START

OF

F

KEY

Remove Key

Types 1, 2 & 3 Types 4, 5 & 6

The LED will turn OFF to indicate that the Passlock Resistor Code is now programmed into the module. Remove the key and test the feature by remote starting the engine.

8

For vehicles with a manual transmission, shift to the NEUTRAL position. It is important to carry out step 8 while NOT PRESSING ON THE CLUTCH PEDAL. With an automatic transmission, put the vehicle in Drive (D).

Rev.: 20 201012



Embedded EPS


IGNITIONSWITCH

“CLUTCH SWITCH”(MANUAL CART)

Important Installation Notes

Installation , & 1 2 3Some vehicles such as the Saturn ION, GMC Canyon Chevrolet Colorado, do not have starter wires.and

Installation 5The wiring in some older Passlock 1 models may also have the following color sequence: Black/White, Black (GND), and Black (DATA).

Installation 6The Equinox uses a Passlock 2 even if it does not have a starter wire.

For some vehicles like the Equinox, it may not be required to have the transmission in the Drive (D) position during programming.

SOLUTION #1

USE TWO 6 AMPERE DIODES - Make connection closest to firewall

STARTER KILL(OPTIONNAL)

X

VIOLET

“STARTER” WIRE STARTER

FIREWALL87

87A

30

86 85

+12V BAT

STARTER KILL(OPTIONNAL)

“CLUTCH SWITCH”(MANUAL CAR)

X

VIOLET

“STARTER” WIRE STARTER

IGNITIONSWITCH

SOLUTION #2

FIREWALL

USE 1 RELAY SPDT TYPEMake connection closest tofirewall

Additional InformationSUBJECT: CAVALIER,SUNFIRE 1999 OR OLDER (PASSLOCK SUPPLIED WITH BULB TEST)Our technical department has noticed that on certain vehicles, such as Cavalier and Sunfire 1999 or older, a voltage residue coming from the starter, once the vehicle is started, is present as a pulse during a few seconds. This problem only occurs on some vehicles; therefore, with test light, once the key is back to the ignition position, after being started, the starter wire is to be tested. The cut must be made instantly. If it is not the case, install a 12-amp diode as described in the diagram below. This is to rectify situation.

Rev.: 20 201012



Embedded EPS


LED Status Description TroubleshootingDuring Power Up

Flashes continuously

by increments of one

Type 4 or 5 will be selected for

programming.

Press and hold the Programming button

for 3 second to select the type.

Flashes onceType 4 or 5 was successfully

programmed.Normal operation.


by increments of twoType 6 will be selected for programming.



Flashes twice Type 6 was successfully programmed. Normal operation.


by increments of three

Type 1, 2 or 3 will be selected for

programming.



Flashes three timesType 1, 2 or 3 was successfully

programmed.Normal operation.

Solid redType 1, 2, 3 or 6 has been selected -

waiting to record ignition RCODE.

Turn the key to the ON position and

press on the Programming button until

you hear a clicking sound.

Solid redType 1, 2, 3 or 6 has been selected -

waiting to record start RCODE.

If the ignition recording is complete, turn

the key to the Start position and press on

the Programming button until you hear a

clicking sound.

Solid redType 4 or 5 has been selected - waiting

to record RCODE.

Turn the key to the ON position and

press on the Programming button until

you hear a clicking sound.

Module Reset

Flashes quickly for 1

secondThe module has been successfully reset.

If the module resets after programming,

check your resistor code wires.

Module LED Diagnostics

* In this instance of the module diagnostics, the LED flashes in a continuous sequence.

x1sec

x3

x2

x1

x3*

x2*

x1*

Rev.: 20 201012



Embedded EPS


This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connexion with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06

PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7 , 0 4 6 , 1 2 6 B 1 ; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2 , 4 2 0 , 9 4 7 ; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA

Limited One-Year Consumer Warranty

Rev.: 20 201012



Embedded EPS


xk09-plxr en ig cp20101220a - microsoft · update alert: firmware updates are posted to the web on...

Documents