Specification Revision Log Type of Specifictaions Reviewed By Date CommentsIndustry Standards Leandro Justi 2/8/2018BEECHCRAFT Leandro Justi 2/8/2018BOEING Leandro Justi 2/8/2018 Updated per Perfekta ListGULFSTREAM Leandro Justi 2/8/2018 Updated per Perfekta ListCESSNA Leandro Justi 2/8/2018LEARJET - BOMARDIER Jonhy Buster - INACTIVELOCKHEED MARTIN Leandro Justi 2/8/2018 Updated per Perfekta List

NOTE: If a specification listed on a Shuttle Aerospace purchase order is not listed on this specification revision log, please contact Shuttle Aerospace management for current revision level. In addition, please contact Shuttle Aerospace if a copy of a specification is needed.

Specification Revision Log Next Scheduled Review Date

Prior to 06/01/2018Prior to 06/01/2018Prior to 06/01/2018Prior to 06/01/2018Prior to 06/01/2018

-Prior to 06/01/2018

NOTE: If a specification listed on a Shuttle Aerospace purchase order is not listed on this specification revision log, please contact Shuttle Aerospace management for current revision

INDUSTRY SPECIFICATIONSSPEC DESCRIPTION REV

AMS 2448 Thermal Spray Coating BAMS 2449 Grinding of Thermal Spray Coating -AMS 2658 Hardness and Conductivity for Aluminum Alloys DAMS 2759 Heat Treat EAMS 7881 Thermal Spray Coating - Powder A

AMS-C-8837 Vacuum Cadmium Plate AAMS-QQ-C-320 Chrome Plating BAMS-QQ-P-35 Passivate and Rinse A

AMS-QQ-P-416 Cadmium Plate EAMS-S-13165 Shot Peen AASTM E1417 Pent. Inspect M16ASTM E1444 Mag. Inspect M16e1ASTM E399 Fracture Toughness Testing 17ASTME18 Hardness Test 17e1AWS A5.8 Alloy for furnace copper braze 2011AWS C3.4 Silver Braze - Torch 2016AWS C3.5 Silver Braze - Induction 2016AWS C3.6 Furnace Copper Braze 2016

AWS D17.1 Fusion Weld 2010SAE-AMS-STD-595 (FED-STD-595) Paint colors A

MIL-A-8625 (AMS-A-8625) Anodize F MIL-DTL-5541 Chemical Film F

SAE-AMS-H-6875 (MIL-H-6875) Heat Treat BMIL-L-23398 Dry Film Lube D

MIL-L-46010 (MIL-L-8937) Dry Film Lube ESAE-AMS-M-3171 (MIL-M-3171) Dichromate Treatment - Magnesium -

MIL-PRF-16173 Oil EMIL-PRF-23377 Primer KMIL-PRF-46010 Dry Film Lube HMIL-STD-1907 Pent./Mag. Acceptance Criteria -MIL-STD-871 Strip plating C

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.

Last Update

Update 02/08/2018

Update 02/08/2018Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

Update 02/15/2017Update 02/08/2018Update 02/08/2018Update 02/08/2018

Update 02/08/2018Update 02/08/2018Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

Update 02/08/2018Update 02/08/2018

Update 02/08/2018Update 02/08/2018Update 02/08/2018Update 02/08/2018

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.BEECHCRAFT SPECIFICATIONS

SPEC111545130450BS201

BS22455BS23369BS23865BS23967BS24580

BS24749

BS24757BS24790BS24942BS25032BS25093BS25110BS25116BS25210BS25314BS25526BS25649BS25691BS25696BS25707BS2591

BS303413BS305511

BS361BS383

BS392875BS510BS511

SAS03-003SAS04-004SAS04-012SAS04-014SAS04-016SAS05-001SAS06-001SAS06-002SAS06-003SAS06-004SAS07-001SAS07-002

SAS07-004SAS09-002SAS09-005SAS09-006SAS10-001SAS10-002SAS10-004SAS10-005

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.BEECHCRAFT SPECIFICATIONS

DESCRIPTIONHBPS METHOD - NATIONAL FORM THREAD RELIEFHBPS STANDARD PRACTICE NOTESHBPS ADHESIVES, CEMENTS, AND SEALERS, APPLICATION AND USE OFHBPS FINISHING PROCEDURE FOR MODELS USING URETHANE FINISHESHBPS CHEMICAL LOCKING OF METAL PARTS, ALL MODELSHBPS CORROSION INHIBITING ADHESIVE PRIMERHBPS INSTALLATION OF NUTPLATES, STUDS, STANDOFFS AND OTHER FASTENERS ON COMPOSITE AND METAL SURFACESHBPS PARTS LIST INTERPRETATION SPECIFICATION

HBPS FINISH CODES FOR CORROSION PROTECTION PRIOR TO TOP COATINGHBPS INSTALLATION AND STAKING OF BEARINGS,BUSHINGS, AND GENERAL PARTSHBPS RAW MATERIAL SUBSTITUTION SPECIFICATIONHBPS CORROSION RESISTANT FUEL CELL EPOXY PRIMERHBPS FINISH SPECIFICATION FOR THE MODEL 3000 JPATSHBPS INDEX OF SPECIFICATIONS, STANDARDS,AND OTHER PUBLICATIONS APPLICABLE TO THE MODEL 3000 JPATSHBPS PRINCIPAL STRUCTURAL ELEMENTS, FRACTURE CRITICAL PARTS, AND DURABILITY CRITICAL PARTS CONTROL REQUIREMENTSHBPS SURFACE PREPARATION OF METALS PRIOR TO ADHESIVE BONDING NON ANODIZEDHBPS FINISH SPECIFICATION FOR THE MODEL 4000HBPS SPECIFICATION FOR STRESS AND EMBRITTLEMENT RELIEF REQUIREMENTS FOR CHEMICAL PROCESSESHBPS NON-DESTRUCTION INSPECTION PROCESSES SUBSTITUTION SPECIFICATIONHBPS CONTROL OF PRODUCTION MANUFACTURING PROCESSES FOR SUPPLIERS AND OUTSIDE PRODUCTIONHBPS FRACTURE CRITICAL AND DURABILITY PARTS CONTROL LISTING AND IDENTIFICATION/SERIALIZATION REQUIREMENTS FOR MODEL 3000HBPS FLUORESCENT PENETRANT AND MAGNETIC PARTICLE INSPECTION PART EXEMPTION LISTHBPS STANDARD ENGINEERING DRAWING CALLOUTS FOR GENERAL MATERIALS, PRACTICES, AND PROCESSESHBPS INDEX OF SPECIFICATIONS STANDARDS AND OTHER PUBLICATIONS APPLICABLE TO THE MODEL 3000HBPS APPROVED RAW MATERIAL SUBSTITUTION BY PART NUMBERHBPS STANDARD FINISH SPECIFICATIONHBPS MATERIALS, EQUIPMENT, AND REQUIREMENTS FOR IDENTIFICATION MARKINGHBPS REPROCESSING SPECIFICATION FOR HBC PARTSHBPS WELDING OF ALUMINUM ALLOYSHBPS WELDING OF STEELS AND CORROSION AND HEAT RESISTING ALLOYSHBPS SHEET METAL-EDGE CONDITIONSHBPS FASTENERS-NUTPLATE INSTALLATIONHBPS FASTENERS-SOLID RIVET ACCEPTANCEHBPS FASTENERS-HI-LOK FASTENER INSTALLATION REQUIREMENTSHBPS FASTENERS-RIVET SUBSTITUTIONHBPS WELDING-GENERALHBPS HOLES-MACHINED HOLE TOLERANCEHBPS HOLES-RIVET OVERSIZE HOLESHBPS HOLES-TOOLING HOLESHBPS SPOTFACINGHBPS FORMING-JOGGLE ACCEPTANCEHBPS FORMING-METAL THICKNESS VARIATION

HBPS INDEX OF SPECIFICATIONS, STANDARDS,AND OTHER PUBLICATIONS APPLICABLE TO THE SUPER KING AIRMODELS B200, B200C, B200T, B200CT, 300, 300LW, B300, B300C

HBPS FORMING-SWAGINGHBPS DIMENSIONAL TOLERANCES-CONTOURS ON FORMED PARTSHBPS DIMENSIONAL TOLERANCES-FENERAL TOLERANCES AND INTERPRETATIONSHBPS FREE STATE VARIATION OF MACHINED PARTSHBPSMACHINING-COAXIALITYHBPS MACHINING-SCARFINGHBPS MACHINING-CORNER RADIIHBPS MACHINING-SURFACE ROUGHNESS AND MACHINED FINISHES

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.BEECHCRAFT SPECIFICATIONS Last Update

REVB

49 Update 02/08/201838 Update 02/08/201826 Update 02/08/201857 Update 02/08/20184-

13 Update 02/08/2018

6 Update 02/08/20183

13 Update 02/08/20184

17 Update 02/08/201823 Update 04/01/2016142

21-1

21 Update 02/15/20178 Update 02/08/2018

18 Update 02/08/2018D8 Update 02/08/20182

12 Update 02/08/201828 Update 02/08/20181595D7 Update 04/01/201651

ORIG-D

ORIGAB

ORIG

ORIGA--

ORIGORIG

3ORIG

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.GULFSTREAM SPECIFICATIONS

SPECGAC14DGAF14A

GAMPS1001GAMPS1105GAMPS1106GAMPS2101GAMPS2109GAMPS3101GAMPS3102GAMPS3103GAMPS3104GAMPS3105GAMPS3107GAMPS3108GAMPS3110GAMPS3111GAMPS3113GAMPS3115GAMPS3116GAMPS3201GAMPS3202GAMPS3203GAMPS3205GAMPS3207GAMPS3208GAMPS3209GAMPS3210

GAMPS3214

GAMPS3216

GAMPS3217GAMPS3306GAMPS4001 GAMPS4101GAMPS4102GAMPS4103GAMPS4104GAMPS4105GAMPS4106GAMPS4109GAMPS4110GAMPS4111GAMPS4114GAMPS4122GAMPS5101GAMPS5102GAMPS5103

GAMPS5104GAMPS5108GAMPS6101

GAMPS6102

GAMPS6103GAMPS6104GAMPS6105GAMPS6106

GAMPS6109

GAMPS6110GAMPS6111

GAMPS6113

GAMPS6201

GAMPS6203

GAMPS6204GAMPS8209GAMPS9101GAMPS9102GAMPS9103GAMPS9502GAMPS9504

GAS30TV

GAS31AGAS31DGAS31F

GER-0003GMS5001GMS5002GMS5003GMS5004

GMS5005

GMS5006

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.GULFSTREAM SPECIFICATIONS

DESCRIPTION REVGAPS CONTROL, SERIALIZATION AND TRACEABILITY REQUIREMENTS FOR PARTS -GAPS INDIVIDUAL FINISH AND PROCESS CODES AHGAPS INDEX OF GA MATERIAL PROCESS SPECIFICATIONS VGAPS IDENTIFICATION MARKING OF FABRICATED METALLIC PARTS AND ASSY DGAPS IDENT MARKING OF FABRICATED NONMETALLIC PARTS ASSY BGAPS FABRICATION OF ALUMINUM ALLOYS FGAPS STANDARD MACHINING PRACTICES AND CONTROL OF MACHINED PARTS AGAPS ZINC CHROMATE PRIME APPLICATION -GAPS INTEGRAL FUEL TANK COATING, AMS-C-27725, APPLICATION OF KGAPS PRIMER COATING, EPOXY, PREPERATION & APPLICATION OF DGAPS APPLICATION OF PRIMER COATING, EPOXY POLYAMIDE -GAPS SANDING, SURFACING AND SEALING PRIMERS, PREPARATION AND APPL BGAPS PRIMER COATING-CELLULOSE-NITRATE MODIFIED ALKYD TYPE, APPLICATION OF -GAPS PRIMER COATING-EPOXY POLYAMIDE, APPLICATION OF -GAPS PRIMER COATING-EPOXY PREP & APP OF FOR USAF C-20 PROGRAM -GAPS PRIMER COATING SANDING SURFACER PREP & APP FOR USAF C-20 PROGRAM -GAPS PRIMER, EPOXY, ANTI-STATIC GENERAL APPLICATION BGAPS PRIMER, EPOXY, CHLORINATED SOLVENT, GENERAL BGAPS PRIMER,EPOXY,WATERBORNE,PREP & APPLICATION EGAPS CLEANING & CHEMICAL SURFACE TREATMENT OF AIRCRAFT SURFACES -GAPS CLEAR DULL VINYL LACQUER - APPLICATION TO CONTROL DISPLAY & PLACARDS -GAPS LACQUER: ACRYLIC, MIL-L-81352, APPLICATION OF AGAPS COATING; GLOSS EPOXY FINISH CGAPS PRESERVATION OF FERROUS & NON-FERROUS METAL SURFACES AGAPS CORROSION PREVENTIVE COMPOUND AGAPS POLYURETHANE ENAMEL, PREPARATION AND APPLICATION OF DGAPS PROTECTION AND HANDLING OF MATERIALS AND PARTS B

-

C

GAPS COATING:POLYURETHANE,RAIN EROSION RESISTANT,APPLICATION -GAPS SOLID DRY FILM LUBRICANT AGAPS COSMETIC POLISHING OF AIRCRAFT METALLIC SURFACES FGAPS PREPARATION OF SURFACES BY ABRASIVE METHODS AGAPS ACID CLEANING-ALUMINUM AND ALUMINUM ALLOYS BGAPS ACID CLEANING & PASSIVATION OF FERROUS & NICKEL-BASE PARTS CGAPS SURFACE PRE-TREATMENT OF MATERIALS PRIOR TO ADHESIVE BONDING DGAPS ALKALINE CLEANING OF FERROUS & NONFERROUS ALLOYS CGAPS IMMERSION STRIPPING OF PAINT COATINGS -GAPS PRE-TREATMENT & ETCHING OF FLUOROCARBON SURFACES (TFE, FEP, CTFE) -GAPS STRIPPING OF CADMIUM FROM FERROUS, CRES, COPPER, AND COPPER ALLOYS PARTS AGAPS STRIPPING OF CHROME PLATING FROM FERROUS AND CRES PARTS AGAPS CHROMATE CONVERSION TREATMENT FOR CADMIUM PLATING -GAPS SOLVENT WIPE CLEANING AGAPS HEAT TREATMENT OF LOW ALLOY STEELS CGAPS HEAT TREATMENT OF WROUGHT PRECIPITATION HARDENABLE STAINLESS STEEL CGAPS HEAT TREATMENT OF MARTENSITIC STAINLESS STEELS B

GAPS URETHANE TOPCOAT, DESOTO SERIES 1000, PREPARATION AND APPLICATION OF, FOR USAF C-20GAPS EPOXY TOPCOAT,HIGH-SOLIDS,PHOSPHATE ESTER FLUID RESISTANT, PREPARATION AND APPLICATION OF

GAPS HEAT TREATMENT OF AUSTENITIC, CORROSION AND HEAT RESISTANT STEELS AGAPS HEAT TREATING OF ALUMINUM ALLOYS EGAPS PLATING OF ALUMINUM ALLOYS - PRETREATMENT OF -

A

GAPS BRUSH PLATING OF FERROUS & NON-FERROUS ALLOYS FGAPS COPPER PLATING (ELECTRODEPOSITED) FOR FERROUS ALLOYS BGAPS CHROMIUM PLATING (ELECTRODEPOSITED) BGAPS CHEMICAL CONVERSION TREATMENT OF MAGNESIUM AND MAGNESIUM ALLOYS -

-

GAPS APPLICATION OF PLASMA SPRAY COATING -GAPS ELECTROLESS NICKEL-BORON PLATING -

-

GAPS ANODIC COATING (TYPE I - CHROMIC ACID) FOR ALUMINUM AND ALUMINUM ALLOYS E

B

GAPS PHOSPHORIC ACID ANODIZING OF ALUMINUM FOR BONDING JAPPLICATION OF ANAEROBIC ADHESIVES FOR THREADLOCKING, RETAINING, AND SEALING AGAPS ULTRASONIC QUALITY REQUIREMENTS FOR ALUMINUM AND ALUMINUM ALLOYS BGAPS ULTRASONIC INSPECTION LOW ALLOY AND STAINLESS STEELS CGAPS ULTRASONIC QUALITY REQ FOR TITANIUM AND TITANIUM ALLOYS BGAPS ETCH INSPECTION OF LOW ALLOY STEEL PARTS AGAPS CLAD TEST METHOD,FOR 2024 ALUMINUM ALLOY B

E

GAPS GULSTREAM AEROSPACE STANDARD INDEX GGAPS SHOP PRACTICES JGAPS APPROVED VENDORS LIST FOR FASTENERS -GAPS SUPPLIER WEIGHT CONTROL & REPORTING REQUIREMENTS DGAPS EPOXY PRIMER COATING, HYDRAULIC FLUID RESISTANT -GAPS EPOXY TOPCOAT SYSTEM HYDRAULIC FLUID RESISTANT SERIES 2000 BGAPS EPOXY PRIMER, ANTI-STATIC BGAPS PRIMER COATINGS-EPOXY, CHLORINATED, SOLVENTS A

B

GAPS EPOXY TOPCOAT, HIGH-SOLIDS, DIPHOSPHATE ESTER HYDRAULIC FLUID RESISTANT -

GAPS CADMIUM PLATING (ELECTRO-DEPOSITED) FOR FERROUS PARTS HEAT TREATED IN RHE ROCKWELL C-46 C-49 RANGE

GAPS APPLICATION OF HEAVY PHOSPHATE (MANGANESEBASE) COATING TO FERROUS METALS

GAPS CHEMICAL CONVERSION COATINGS ON ALUMINUM ANDALUMINUM ALLOYS

GAPS ABRASION-RESISTANT ANODIC COATINGS (TYPE III - HARD COAT) OF ALUMINUM AND ALUMINUM ALLOYS

GAPS WROUGHT METALLIC MATERIAL ACCEPTABLE STOCK SIZE SUBSTITUTION AND STOCK THICKNESS CONTROL

GAPS EPOXY PRIMER COATING, WATER-REDUCTIBLE, LOW VOC, DIPHOSPHATE ESTER HYDRAULIC FLUID RESISTANT

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.GULFSTREAM SPECIFICATIONS Last update

SCN

Update 02/08/20181

Update 02/08/20181, 2 Update 02/08/2018

1, 2, 3, 4 Update 02/08/20181, 2

1 Update 02/08/20181, 2, 3, 4

1, 2, 3, 4, 5

1

Update 02/08/2018

1, 2, 3, 4, 5 Update 02/08/201831

2, 31, 2, 3, 4 Update 02/08/2018

Update 02/08/2018

1, 2, 3 Update 02/15/2017

1, 2, 3

1

1, 2 Update 02/15/2017

1 Update 02/08/20181

1, 31, 2 Update 02/08/20181, 2

1, 2, 3, 4 Update 02/08/20181

1, 2, 3Update 04/01/2016

1, 2

1, 2

1, 2, 3, 4

1, 2, 3, 4 Update 02/15/2017

1

Update 02/08/2018

1 Update 02/08/2018

Update 02/08/20181, 2, 3, 4, 5, 6, 7

Update 04/01/20161

1, 2, 3 Update 02/08/20181

1 Update 02/15/2017

1, 2, 3, 4

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.BOEING SPECIFICATIONS

SPEC DESCRIPTION REV

BAC5000 BCPS GENERAL SEALING AP

BAC5010 BCPS APPLICATION OF ADHESIVES Y

BAC5019 BCPS CHROMIC ACID ANODIZING UBAC5022 BCPS SULFURIC ACID ANODIC FILMS JBAC5032 BCPS GRINDING OF CHROMIUM PLATE G

BAC5034 N

BAC5034-1 H

BAC5047 BCPS INSTALLATION OF FASTENERS (FLUID TIGHT) M

BAC5063 N

BAC5063-1 D

BAC5300 N

BAC5300-1 BCPS SURFACE AND EDGE INTEGRITY OF METAL PARTS J

BAC5300-2 J

BAC5307 BCPS PART MARKING U

BAC5423 BCPS PENETRANT METHODS OF INSPECTION WBAC5424 BCPS MAGNETIC PARTICLE INSPECTION UBAC5435 BCPS BEARING INSTALLATION AND RETENTION Y

BAC5436 G

BAC5439 BCPS ULTRASONIC INSPECTION J

BAC5440 K

BAC5555 T

BAC5602 BCPS HEAT TREATMENT OF ALUMINUM ALLOYS AF

BAC5609 BCPS DOW 7 TREATMENT OF MAGNESIUM ALLOYS F

BAC5613 T

BAC5617 BCPS HEAT TREATMENT OF ALLOY STEELS U

BAC5619 H

BCPS TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES

BCPS TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH COATINGS

BCPS FASTENER INSTALLATION IN COMPOSITE STRUCTURESBCPS SOLID RIVET INSTALLATION IN COMPOSITE STRUCTURESBCPS FORMING, STRAIGHTENING AND FITTING METAL PARTS - DEBURR

BCPS METAL PART FORMING, STRAIGHTENING AND FITTING

BCPS ETCH INSPECTION OF GROUND MACHINED STEEL PARTS

BCPS HOLE PREPARATION, MACHINING, AND GRINDING OF STEELSBCPS PHOSPHORIC ACID ANODIZING OF ALUMINUM FOR STRUCTURAL BONDING

BCPS HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS

BCPS HEAT TREATMENT OF CORROSION RESISTANT STEEL

BAC5621 L

BAC5625 BCPS SURFACE TREATMENTS FOR FERROUS ALLOYS E

BAC5626 C

BAC5632 BCPS BORIC ACID - SULFURIC ACID ANODIZING D

BAC5637 BCPS ZINC-NICKEL ALLOY PLATING FBAC5639 BCPS APPLICATION OF ANTI-STATIC COATINGS BBAC5650 BCPS HARDNESS TESTING E

BAC5651 D

BAC5701 BCPS CADMIUM PLATING N

BAC5706 BCPS APPLICATION OF ORGANIC FINISHES NBAC5709 BCPS HARD CHROMIUM PLATING W

BAC5710 BCPS APPLICATION OF SPECIAL PURPOSE COATINGS AA

BAC5716 BCPS PREPARATION OF COLORED ANODIC FILMS G

BAC5719 AA

BAC5725 BCPS STRIPPING ORGANIC MATERIALS GBAC5730 BCPS SHOT PEEN RBAC5734 BCPS ANODIZING OF MAGNESIUM ALLOYS (DOW 17) G

BAC5736 W

BAC5746 BCPS NICKEL PLATING (ELECTRODEPOSITED) M

BAC5748 U

BAC5750 BCPS SOLVENT CLEANING R

BAC5751 M

BAC5753 W

BAC5755 AC

BAC5771 BCPS STRIPPING INORGANIC FINISHES JBAC5774 BCPS ALKYD PRIMERS, APPLICATION OF JBAC5793 BCPS APPLICATION OF CORROSION RESISTIVE FIN. V

BAC5797 F

BAC5804 AC

BAC5807 N

BAC5810 BCPS PHOSPHATING M

BCPS TEMPERATURE CONTROL FOR PROCESSING OF MATERIAL

BCPS COLORED CHEMICAL CONVERSION COATINGS FOR ALUMINUM

BCPS EDDY CURRENT ELECTRICAL CONDUCTIVITY INSPECTION

BCPS CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS

BCPS APPLICATION OF CHEMICAL/SOLVENT RESISTANT FINISHES

BCPS ABRASIVE CLEANING, DEBURRING, AND FINISHING

BCPS CLEANING, DESCALING AND SURFACE PREPARATION OF FERROUS ALLOYS

BCPS CLEANING, DESCALING AND SURFACE PREPARATION OF TITANIUM AND TITANIUM ALLOYS

BCPS APPLICATION OF INTERIOR DECORATIVE FINISHES

BCPS COATING SYSTEMS, FOR CORROSION PRONE AREAS, APPLICATION OFBCPS LOW HYDROGEN EMBRITTLEMENT CADMIUM - TITANIUM ALLOY PLATINGBCPS APPLICATION OF HIGH TEMPERATURE EPOXY PRIMER

BAC5821 BCPS HARD ANODIZING E

BAC5837 V

BAC5845 BCPS APPLICATION OF POLYURETHANE ENAMEL R

BAC5849 N

BAC5851 BCPS APPLICATION OF THERMAL SPRAY COATINGS H

BAC5855 D

BAC5861 E

BAC5877 L

BAC5882 K

BAC5884 BCPS ANODIZING OF ALUMINUM ALLOYS EBAC5946 BCPS TEMPER INSPECTION - NONFERROUS ALLOY AABAC5951 BCPS GLASS BEAD PEENING D

BACB28AA R

BACB28AT Y

BACD2086 ORIG

BACD2097 AA

BMS10-100 BCPS FLEXIBLE CORROSION INHIBITING COATINGS CBMS10-103 BCPS NONCHROMATED PRIMER FOR COMPOSITES DBMS10-11 BCPS CHEMICAL AND SOLVENT RESISTANT FINISH AC

BMS10-120 C

BMS10-20 N

BMS10-60 BCPS PROTECTIVE ENAMEL WBMS10-72 BCPS EXTERIOR DECORATIVE PAINT SYSTEM AJ

BMS10-79 R

BMS10-83 N

BMS3-23 BCPS ORGANIC CORROSION INHIBITING COMPOUND J

BMS3-26 B

BMS3-27 B

BMS3-29 B

BCPS PREPARING EXTERIOR PLASTIC SURFACES FOR PAINT

BCPS BRUSH PLATING, ANODIZING AND ELECTROCHEMICAL ETCHING

BCPS GRINDING AND MACHINING OF THERMAL SPRAYED COATINGSBCPS APPLICATION OF PHOSPHATE-FLUORIDE COATING TO TITANIUM ALLOYSBCPS APPLICATION OF ORGANIC CORROSION INHIBITING COMPOUNDSBCPS APPLICATION OF URETHANE COMPATIBLE PRIMER

BCPS BUSING, FLANGED, PRESES FIT, OVERSIZE BORE, OVERSIZE FLANGE

BCPS BUSHING, FLANGED, UNDERSIZE BORE, NOMINAL AND OVERSIZE OD (FOR UNCLAMPED INSTL)

BCPS THREADS, DECREASED MAJOR DIAMETER, CONTROLLED RADIUS ROOTBCPS SURFACE TEXTURE (US CUSTOMARY AND METRIC)

BCPS SELECTIVELY REMOVABLE INTERMEDIATE COAT FOR COMPOSITESBCPS CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS

BCPS URETHANE COMPATIBLE, CORROSION RESISTANT PRIMERBCPS INTERIOR DECORATIVE URETHANE PAINT SYSTEM

BCPS ORGANIC CORROSION INHIBITING COMPOUNDS, HEAVY DUTYBCPS CORROSION INHIBITING MATERIAL, NONDRYING RESIN MIXBCPS ADVANCED ORGANIC CORROSION INHIBITING COMPOUNDS

BMS3-35 B

BMS3-8 BCPS SOLID FILM LUBRICANT, LIQUID DISPERSED FBMS5-26 BCPS INTEGRAL FULE TANK SEALANT VBMS5-45 BCPS FUEL TANK SEALANT JBMS5-89 BCPS CORROSION INHIBITING ADHESIVE PRIMER T

BMS7-26 R

BMS7-306 K

BMS7-323 E

BSS7039 BCPS LIQUID PENETRANT INSPECTION C

BSS7055 BCPS ULTRASONIC INSPECTION, WROUGHT PRODUCTS B

BSS7350 BCPS ROCKWELL HARDNESS TESTING PROCEDURES E

BSS7351 F

D2-5000 BCPS PROTECTIVE FINISH CODES CH

D6-1276 U

D6-5000 BH

D6-51991 L

BCPS HEAVY DUTY CORROSION INHIBITING COMPOUNDS

STEEL BAR, FORGING STOCK FORGINGS, AND TUBING-4340BCPS HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS, 7150-T7751X

BCPS HIGH STRENGTH FATIGUE TOLERANT,STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE

BCPS EDDY CURRENT ELECTRICAL CONDUCTIVITY - DIRECT READING METHOD

BCPS CONTROL OF MATERIALS AND PROCESSES FOR DESIGNATED PARTS AND COMPONENTS FOR BOEING PRODUCTS

BCPS SPECIAL COMMERCIAL AIRPLANE COMPANY FINISH CODESBCPS QUALITY ASSURANCE STANDARD FOR DIGITAL PRODUCT DEFINITION AT BOEING SUPPLIERS

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.BOEING SPECIFICATIONS Last Update

PSDS QPL

Update 02/08/2018

Update 02/08/2018

6-135, 6-143, 6-145, 6-155, 6-158, 6-162, 6-163, 6-166, 6-167, 6-169, Update 02/08/20186-19, 6-20

6-9, 6-11, 6-12

6-131, 6-134, 6-136, 8-4, 8-5, 9-4, 9-5 Update 02/08/2018

6-55, 8-1, 9-2 Update 02/08/2018

6-104, 6-106, 6-108, 6-109, 9-2 Update 02/08/2018

6-108, 8-13, 8-14, 8-16, 8-17, 9-6, 9-12, 9-34, 9-55 Update 02/08/2018

6-4, 6-5, 8-1 Update 02/08/2018

8-5, 9-22 Update 02/08/2018

6-1, 6-6, 9-2 Update 02/08/2018

6-1, 6-2, 6-5, 6-19, 6-22, 8-2 Update 02/08/2018

Update 02/08/2018

6-155, 6-156, 6-158, 6-159, 8-8, 8-14, 8-16, 9-21, 9-25 Update 02/08/20186-40, 8-17, 8-22, 9-12 Update 02/08/2018

6-62, 6-68, 6-69, 6-70, 6-74, 6-75, 8-9, 8-10, 9-16 Update 02/08/2018

6-51, 6-53, 6-61, 6-70, 6-71, 6-72, 8-23, 8-25, 8-26, 9-7 Update 02/08/2018

6-22 Update 02/08/2018

6-41, 6-45, 6-48, 6-49, 6-50, 6-51, 6-52, 8-1, 9-5 Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

6-5, 6-6, 6-7, 6-9 Update 02/08/2018

6-29, 6-39, 6-44, 6-46, 6-48, 6-49, 6-53, 6-55, 6-56, 8-3, 8-5, 8-6, 9-26 G Update 02/08/2018

6-88, 6-89, 8-17, 8-19, 8-20, 8-21 Update 02/08/2018

6-51, 6-52, 6-53, 6-56, 8-10, 8-11, 8-8, 8-9, 9-12 Update 02/08/2018

6-277, 6-278, 6-279, 6-281, 6-282, 6-283, 6-284, 6-285, 6-286, 6-288, 6-289, 6-290, 6-291, 6-295, 6-296, 6-297, 6-304, 8-21, 8-22, 8-23, 9-

45, 9-55, 9-58, 9-60, 9-61, 9-62, 9-63

6-173, 6-174 , 6-175, 6-177, 8-23, 8-24, 8-29, 9-41, 9-43, 9-46, 9-48, 9-49, 9-50

6-288, 6-289, 6-294, 6-295, 6-297, 6-305, 6-306, 6-308, 6-309, 6-310, 8-11, 8-24, 8-28, 9-99, 9-105, 9-107

6-98, 6-111, 6-112, 6-113, 6-114, 6-115, 6-116, 6-117, 6-118, 6-120, 6-122, 6-123, 8-1, 8-2, 8-3, 9-1, 9-2

6-145, 6-174, 6-182, 6-183, 6-184, 6-193, 6-195, 6-200, 6-201, 6-202, 6-203, 6-204. 6-205, 6-40, 8-15, 9-3

8-2, 8-6 Update 02/08/2018

6-40, 6-42, 6-60, 6-61, 6-62, 6-65, 6-66, 6-67 Update 02/08/2018

9-27, 9-28, 9-31 Update 02/08/2018

Update 02/08/2018

Update 02/08/20186-18, 6-19, 6-20 Update 02/08/20186-4, 6-5, 6-8, 8-2 Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

6-13, 9-4 Update 02/08/20186-57, 6-66, 6-67, 6-68, 8-10, 8-2, 8-8, 8-9 ORG Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

8-11, 9-16 Update 02/08/20186-104, 6-105 , 6-108, 6-109 , 6-110, 8-17, 8-18, 8-19, 9-8 Update 02/08/2018

6-16, 6-21, 6-23, 6-25, 6-26, 6-27 Update 02/08/2018

Update 02/08/2018

6-42, 6-43, 6-44, 6-46 Update 02/08/2018

6-108, 6-109, 6-110, 8-10, 8-8, 8-9, 9-16 Update 02/08/2018

6-105, 6-106, 6-109, 6-111, 6-113, 6-64, 9-38, 9-40, 9-41 Update 02/08/2018

6-69, 8-10, 8-13, 9-22 Update 02/08/2018

Update 02/08/2018

6-101, 6-104, 6-106, 6-107, 6-96, 6-98, 9-15, 9-16, 9-18 Update 02/08/2018

6-80, 6-81, 6-82, 8-5, 8-6, 8-7 Update 02/08/2018

6-106, 6-107, 6-108, 6-109, 6-110, 6-112, 6-113 , 6-115, 6-116, 9-25 Update 02/08/2018

Update 02/08/2018

6-100, 6-103, 6-106, 6-110 T Update 02/08/2018

8-5, 9-31 Update 02/08/2018

6-22, 6-23, 9-8 Update 02/08/2018

6-31, 6-39, 6-43, 6-50, 6-55, 6-60, 6-62, 6-63, 6-64, 6-67, 6-68, 6-69, 6-71, 6-72, 6-73, 6-74, 6-75, 6-76, 6-77, 6-78, 6-79, 6-80, 6-81, 6-82, 9-10

6-51, 6-54, 6-55, 6-57, 6-58, 6-60, 6-61, 6-62, 6-63, 6-64, 6-65, 6-66, 8-17, 8-19, 8-20, 8-22, 8-23, 9-10

6-109, 6-114, 6-134, 6-135, 6-137, 6-138, 6-140, 6-141, 8-2, 9-21, 9-22, 9-23

6-111, 6-131, 6-136, 6-137, 6-138, 6-142, 6-143, 6-144, 6-145, 6-147, 6-148, 6-149, 6-150, 6-152, 6-153, 6-154, 6-155, 6-156, 6-157, 6-82, 6-96,

8-1, 9-12, 9-13

6-194, 6-196, 6-198, 6-199, 6-200, 6-201, 6-202 , 6-203, 6-204 , 6-205, 6-206, 9-26, 9-27, 9-28

6-101, 6-116, 6-138, 6-145, 6-153, 6-156, 6-154, 6-164, 6-165, 6-168, 6-171, 6-172, 6-173, 6-174, 6-176, 6-177, 6-178, 6-88, 6-97, 8-10, 8-8, 8-9,

9-62, 9-66, 9-67, 9-68, 9-69, 9-70, 9-71, 9-72

6-4, 6-5, 6-8 Update 02/08/2018

6-104, 6-96, 8-2, 9-14 Update 02/08/2018

6-49, 6-53, 6-55, 6-57, 6-58, 6-61, 6-62, 6-63, 6-66, 9-14, 9-16 Update 02/08/2018

8-6 Update 02/08/2018

F Update 02/08/2018

6-1, 6-2, 6-3 Update 02/08/2018

6-13, 6-18, 9-36 Update 02/08/2018

6-17, 6-18, 8-1, 9-1 Update 02/08/2018

6-19, 6-20, 6-21, 6-22, 6-24, 9-8 Update 02/08/2018

9-19 Update 02/08/20186-57, 6-59, 6-60, 8-4 Update 02/08/2018

6-4, 6-6

Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

ORG Update 02/08/2018C Update 02/08/2018A Update 02/08/2018

ORG Update 04/01/16

ORG Update 02/08/2018

ORG Update 02/08/2018- Update 02/08/2018

ORG Update 02/08/2018

C Update 02/08/2018

ORG Update 02/08/2018

ORG Update 02/08/2018

ORG Update 02/08/2018

ORG Update 02/08/2018

ORG Update 02/08/2018

A

- Update 02/08/2018A Update 02/08/2018

ORG Update 02/08/2018

C Update 02/08/2018

C Update 02/08/2018

6-4, 6-6, 6-9, 6-10, 8-2, 8-3 Update 02/08/2018

6-4, 6-5 Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

9-1 Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

Update 02/08/2018

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.CESSNA SPECIFICATIONS

SPEC DESCRIPTIONCMNP007 SEALANT, ACRYLIC LATEXCMFS003 CAPS ZINC CHROMATE PRIMERCMFS004 CAPS WASH PRIMER-METAL PRETREATMENT COATINGCMFS008 CAPS POWDER COATINGS MATERIALSCMFS010 CAPS PRIMER SURFACER - CHEMICALLY CUREDCMFS011 CAPS BAKING ENAMELCMFS012 CAPS EPOXY ENAMELCMFS013 CAPS HEAT RESISTANT ENAMELCMFS016 CAPS HEAT RESISTANT PAINTCMFS017 CAPS ADHESIVE PRIMERCMFS018 CAPS PRIMER, VINYL, GRAYCMFS020 CAPS POLYURETHANE ENAMELCMFS022 CAPS CLEANING SOLVENTCMFS024 CAPS ACRYLIC MODIFIED POLYURETHANECMFS025 CAPS CORROSION PROTECTIONS PRIMER-INTERIOR/EXTERIOR STRUCTURESCMFS026 CAPS POLYURETHANE CORROSION RESISTANT PRIMERCMFS027 CAPS PHOSPHATE COATINGS COMPOUNDS FOR PHOSPHATING FERROUS METALSCMFS029 CAPS CORROSION PROTECTION PRIMERCMFS031 CAPS RAIN EROSION PRIMERCMFS032 CAPS INTUMESCENT FIRE-RESISTANT COATING COMPOUNDCMFS033 CAPS ANTI-STATIC COATINGSCMFS034 CAPS WATER-BORNE INTERIOR DECORATIVE URETHANE PAINT SYSTEMCMFS035 CAPS CORROSION PRIMER: EPOXY, HI-SOLIDSCMFS036 CAPS CORROSION PRIMER: EPOXY, WATERBORNE (VOC COMPLIANT)CMFS037 CAPS COATINGS: POLYURETHANE, HI-SOLIDSCMFS038 CAPS COATINGS, ACRYLIC MODIFIED URETHANE, HI-SOLIDSCMFS039 CAPS SANDING SURFACERS, HI-SOLIDSCMFS040 CAPS PRETREATMENT PRIMER, EPOXY (VOC COMPLIANT)CMFS043 CAPS CHROME-FREE PRIMER SURFACERCMMP003 CAPS LEAD-ANTIMONY (FIVE PERCENT) ALLOYCMMP005 CAPS 409 STAINLESS STEEL SHEETCMMP007 CAPS PROCUREMENT REQUIREMENTS FOR LONG-LIFE CABLESCMMP010 CAPS OVERSIZE 7050 ALUMINUM ALLOY PLATECMMP011 CAPS ALUMINUM ALLOY SHAPS, EXTRUDED, 7075-O AND -W511CMMP012 CAPS PROCUREMENT REQUIREMENTS FOR TITANIUM MATERIALCMMP013 CAPS ALUMINUM ALLOY STEPPED EXTRS., 7075-T76544 AND 7050-T7652CMMP014 CAPS ALUMINUM ALLOY EXTRUSIONS 7050CMMP015 CAPS PRUCUREMENT REQUIREMENTS FOR TITANIUM MATERIALCMMP017 CAPS ALUMINUM ALLOY 6022-T4 SHEETCMMP018 CAPS ALUMINUM ALLOYS 6013

CMMP019

CMMP020 CAPS ALUMINUM ALLOY 2024-T4 KAISER TFORM, BARE AND ALCLAD SHEETCMMP021 CAPS ALUMINUM ALLOYS, FINE GRAIN QUALITY, SHEET AND COIL FORM

CAPS SURFACE QUALITY CHARACTERISTICS OF ALCLAD OR BARE ALUMINUM:FLAT SHEET AND COILED SHEET

CMMP022 CAPS 434 STAINLESS STEEL/5052 ALACLAD BIMETAL SHEETCMMP025 CAPS PROCUREMENT REQUIREMENTS FOR WROUGHT METALLIC MATERIALSCMMP028 CAPS ALUMINUM ALLOY 7175, FORGING, ANNEALEDCMMP030 CAPS OVERSIZE 7050 ALUMINUM ALLOY PLATE

CMMP032

CPGD001 CAPS GEOMETRIC DIM AND TOLERANCING PROCEDURECSFS001 CAPS FINISH CODE - COMMERCIAL AIRCRAFTCSFS002 CAPS PREPARATION OF NONMETALLIC SURFACESCSFS003 CAPS ADHESIVE PRIMER APPLICATIONCSFS007 CAPS ORGANIC FINISHES - SOLVENT BASE APPLICATIONCSFS008 CAPS PAINT REMOVAL BY SANDINGCSFS010 CAPS APPLICATION OF WATERBORNE URETHANE COATINGSCSFS013 CAPS POLYURETHANE FINISHCSFS014 CAPS PHOSPHATE COATINGS FOR FERROUS METALSCSFS015 CAPS THERMAL SPRAY COATINGSCSFS018 CAPS POWDER COATINGS APPLICATIONCSFS020 CAPS ANODIZE, CHROMIC ACID, SULFURIC ACID AND HARD COATCSFS021 CAPS MECHANICAL FINISHES FOR ALUMINUM AND STAINLESS STEELCSFS024 CAPS CADMIUM PLATE SPECIFICATION - STEEL AND COPPER ALLOYSCSFS025 CAPS BLACKENING OF CADMIUM-PLATED SURFACESCSFS026 CAPS BRUSH CADMIUM PLATINGCSFS027 CAPS CHEM FILM, CHROMATE CONVERSION COATINGS FOR ALUM AND ALUM ALLOYSCSFS028 CAPS CADMIUM-TITANIUM PLATING OF HIGH STRENGTH STEELSCSFS029 CAPS HARD CHROME PLATING ELECTRODEPOSITEDCSFS031 CAPS DISSIMILAR METALS PROTECTION AND CORROSION PROTECTIONCSFS034 CAPS MAGNESIUM - PROTECTIVE TREATMENTCSFS035 CAPS CHEMICAL CLEANING OF METALSCSFS036 CAPS AQUEOUS DEGREASING FOR AIRCRAFT PARTSCSFS037 CAPS ABRASIVE CLEANING OF METALSCSFS038 CAPS CLEANING AND PRETREATMENT OF A/C EXTERIOR SURFACESCSFS039 CAPS SOLVENT CLEANING - LIQUIDCSFS040 CAPS PAINT STRIPPINGCSFS041 CAPS ULTRASONIC CLEANINGCSFS042 CAPS VAPOR DEGREASINGCSFS044 CAPS ALKALINE CLEANING OF METALSCSFS045 CAPS ETCHING AND DEOXIDIZING OF ALUMINUMCSFS046 CAPS SURFACE TREATMENT OF STEEL AND STAINLESS STEELCSFS048 CAPS PICKLING OF MAGNESIUMCSFS064 CAPS MARKING IDENTIFICATION FOR COMMERCIAL A/CCSFS070 CAPS APPLICATION OF SOLID DRY FILM LUBRICANT COATINGCSFS072 CAPS PAINT STRIPPING BY WHEAT STARCH DRY MEDIA BLASTINGCSFS075 CAPS COLOR DEFINITION FOR COMMERCIAL AIRCRAFT JANUARY 1988 AND ONCSFS079 CAPS TITANIUM AND TITANIUM ALLOYS - PHOSPHATE FLUORIDE COATINGCSFS083 CAPS ANTI-STATIC COATINGS - APPLICATIONCSFS084 CAPS COATINGS, VOC COMPLIANT, APPLICATIONCSMP002 CAPS ABRASIVE WATER JET CUTTING OF METALSCSMP003 CAPS HEAT TREATMENT OF ALUMINUM ALLOYS

CAPS PROCUREMENT REQUIREMENTS FOR ALUMINUM BAR AND ROD ROLLED, DRAWN OR COLD FINISHED

CSMP004 CAPS HEAT TREATMENT AND SURFACE HARDENING OF STEELSCSMP010 CAPS HEAT TREATMENT OF NICKEL ALLOYSCSMP024 CAPS MACHINING PRACTICESCSMP027 CAPS SHOT AND GLASS BEAD PEENING OF FERROUS AND NONFERROUS METALSCSMP028 CAPS MECHANICAL FASTENER INSTALLATIONCSMP051 CAPS INSTALLATION, SOLID DRIVEN RIVETSCSMP052 CAPS INSTALLATION, BLIND BOLTS AND RIVETSCSMP053 CAPS COUNTERSINKING AND DIMPLINGCSNP008 CAPS CHROMIC ACID ANODIZING FOR STRUCTURAL BONDING APPLICATIONSCSNP035 SEALING - PRESSURE, WEATHER AND FUELCSNP057 CAPS PHOSPHORIC ACID ANODIZE FOR ADHESIVE BONDINGCSNP060 CAPS CHROMIC ACID ANODIZE. SURFACE PREP, INTEGRAL FUEL TANK PRIME

CSPS004

CSPS059

CSRS006 CAPS MAGNETIC PARTICLE INSPECTIONCSRS014 CAPS IDENTIFICATION OF EQUIPMENT, ASSYS, AND PARTSCSRS015 CAPS STORAGE AND HANDLING OF MATERIALS AND PARTSCSRS020 CAPS MATERIALS SUBSTITUTIONCSTI001 CAPS MAGNETIC PARTICLE INSPECTIONCSTI002 CAPS INSPECTION - PROCESS SPECIFICATION FOR PENETRANTCSTI004 CASP CASTING - INSPECTION AND PROCUREMENTCSTI005 CAPS ACCEPTANCE STDS FOR ULTRASONIC INSP OF WROUGHT METAL PRODUCTCSTI006 CAPS ULTRASONIC INSP RQMTS AND PROCEDURES FOR WROUGHT METAL PRODUCTCSTI007 CAPS ULTRASONIC INSPECTION OF WELDSCSTI008 CAPS ELECTRICAL CONDUCTIVITY TESTING OF ALUMINUM ALLOYSCSTI023 CAPS ALUMINUM FORGINGS: CLASSIFICATION AND INSPECTIONCSTI025 CAPS STEEL FORGINGS: CLASSIFICATIONS AND INSPECTIONCSTI028 CAPS HARDNESS TESTING OF METALSCSTI029 CAPS IDENTIFICATION: INSPECTION AND SPECIAL PROCESSESCSTI036 CAPS ALUMINUM ALLOY EXTRUSION PROCUREMENT AND INSPECTIONCSTI037 CAPS ULTRASONIC INSPECTION OF PAINT THICKNESS ON COMPOSITE ASSYS.TP1102 CAPS HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS TP1103 CAPS HEAT TREATMENT OF ALUMINUM ALLOY CASTINGSTP1202 MACHINING PRACTICES FOR METALLIC MATERIALSTP3408 MARKING IDENTIFICATION FOR FIXED WING AIRCRAFT

CAPS FABRICATION REQUIREMENTS FOR STEELS WITH ULTIMATE TENSILE STRENGTH OVER 260KSICAPS FABRICATION REQUIREMENTS FOR STEELS WITH ULTIMATE TENSILE STRENGTH OVER 260KSI

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.CESSNA SPECIFICATIONS Last Update

REVC Update 02/08/2018BC Update 02/08/2018D Update 02/08/2018C Update 02/08/2018AAAAB Update 02/08/2018AA-AA Update 02/08/2018AAK Update 02/08/2018ABE Update 02/08/2018E Update 02/08/2018C Update 02/08/2018-G Update 02/08/2018H Update 02/08/2018E Update 02/08/2018-A Update 02/08/2018A--CBGBGE-

E1

D

-C

BV Update 02/08/2018BC

C Update 02/08/2018

AAC Update 02/08/2018I Update 02/08/2018EQ Update 02/08/2018-C Update 02/08/2018BEC Update 02/08/2018GH Update 02/08/2018GEAAN Update 02/08/2018-FBBXD Update 02/15/2017

D1J Update 02/08/2018I Update 02/08/2018F Update 02/08/2018AIB Update 02/15/2017CC Update 02/15/2017AT INACTIVE - Update 02/08/2018CC

P1 Update 02/08/2018CC Update 02/08/2018M Update 02/08/2018G Update 02/08/2018O OBSOLETE - Update 02/08/2018

O Update 02/08/2018D Update 02/08/2018O OBSOLETE - Update 02/08/2018I Update 02/08/2018R Update 02/08/2018P Update 02/08/2018G Update 02/08/2018CBU Update 02/08/2018K Update 02/08/2018A

L Update 02/08/2018

A

I Update 02/08/2018B Update 02/08/2018D Update 02/08/2018W Update 02/08/2018FHN Update 02/08/2018C Update 02/08/2018EB Update 02/08/2018HMFJJV Update 02/08/2018CA Update 02/08/2018- Update 02/08/2018- Update 02/08/2018- Update 02/08/2018

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.

LEARJET SPECIFICATIONSSPECBAERD 670/690-001BAERD GEN-004BAERD GEN-007BAPS 138-043BAPS 144-005BAPS 168-006BAPS 168-013BAPS 168-015BAPS 172-034BAPS 176-002BAPS 188-001LES1000LES1004LES1006LES1007LES1008LES1008LES1011LES1016LES1042LES1042LES1043LES1043LES1044LES1045LES1047LES1048LES1049LES1050LES1051LES1056LES1070LES1070LES1071LES1088LES1089LES1091LES1103LES1106LES1114LES1115LES1128LES1135LES1210

LES1236LES1239LES1269LES1276LES1287LES1301LES1306LES1310LES1311LES1320LES1323LES1349LES1361LES1362LES1365LES1365LES1376LES1394LES1407LES1419LES1419LES1421LES1502LES1503LES1510LES1514

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.

LEARJET SPECIFICATIONSDescription REVBAPS FINISH REQUIREMENTS FOR CRJ 700/900 AIRCRAFT ABAPS PROTECTIVE FINISH CODES HBAPS QUALITY CONTROL OF HEAT TREATING EQUIPMENT AND HOT FORMING EQUIPMENT CBAPS APPLICATION OF FLUID RESISTANT (FR) PRIMER DBAPS IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES CBAPS BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT NCBAPS HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS CBAPS STRESS RELIEF OF METALS BBAPS FUSION WELDING BBAPS FLUORESCENT PENETRANT INSPECTION DBAPS STANDARD MACHINING PRACTICES FOR METALLIC PARTS BLCPS ALPHABETICAL & NUMERICAL INDEX GCLCPS INSP-PROCESS SPEC FOR PENETRANT ATLCPS MAGNETIC PARTICLE INSP PLCPS NON-DESTRUCTIVE INSP TLCPS ID-INSP & SPECIAL PROCESSES VLCPS ID-INSP & SPECIAL PROCESSES (AMENDMENT) VLCPS MARKING,ID OF EQUIP ASSY & PARTS AALCPS HEAT TREATMENT OF STEEL YLCPS DEGREASING, PROCESS SPECIFICATION FOR VAPOR MLCPS DEGREASING,PROCESS SPECIFICATION FOR VAPOR (AMENDMENT) MLCPS METALS-PROCESS SPEC FOR CHEMICAL CLEANING AULCPS METALS-PROCESS SPEC FOR CHEMICAL CLEANING (AMENDMENT) AULCPS ABRASIVE CLEANING OF METALS JLCPS ALUMINUM ALLOYS CHROMIC ACID-ANODIZING KLCPS CHEMICAL FILM TREATMENT OF AL & AL ALLOYS AKLCPS CADMIUM PLATE SPEC-STL & COPPER ALLOYS AGLCPS CHROMINUM PLATING FLCPS COPPER PLATING BLCPS HT TREATMENT OF AL ALLOYS ALLCPS CORROSION PREVENTIVE CMPD-APPL KLCPS MATERIAL SUB. & EQUIV FULCPS MATERIAL SUB. & EQUIV (AMENDMENT) FULCPS MACHINING PRACTICES VLCPS APPLICATION OF PRETREATMENT PRIMER ACLCPS PROCEDURE FOR CERT OF SEALERS JLCPS APPLICATION OF EPOXY PRIMER ASLCPS APPLICATION FLAT INTERIOR TOPCOAT PLCPS HARDNESS TESTING ULCPS APP OF MAG PHOS COATING ON STL SURFACES ELCPS APP OF SOLID DRY FILM LUB COATINGS ELCPS PAINT STRIPPING LLCPS FINISH SPECIFICATION BJLCPS ULTRASONIC INSPECTION D

LCPS HARD CHROME PLATING OF HIGH STR STL ALCPS SOLVENT CLEANING NLCPS SPRAY APPL OF NON-CHROMATE PRIMER ALCPS CADMIUM PLATING OF HIGH STR STL BLCPS APPL OF CORROSION INHIB SEALANT CLCPS APPLICATION OF MIL-P-23377 EPOXY POLYAMID PRIMER HLCPS PRIMER STRIPPING FROM DETAIL PARTS ALCPS HOT ALKALINE CLEANING OF AL ALLOYS MLCPS ALKALINE ETCH OF ALUMINUM ALLOYS NLCPS CHEMICAL FILM TREATMENT OF ALUMINUM ALLOYS VLCPS PASSIVATION OF CORROSION RESISTING STEEL ELCPS DECORATIVE CLEAR CHEMICAL FILM FOR SATIN FIN NEWLCPS FINISH SPECIFICATION - MODEL 45 MLCPS APPLICATION OF LIGHT GREEN EPOXY PRIMER ELCPS SHOT PEENING DLCPS SHOT PEENING (AMENDMENT) DLCPS ZINC PLATING FOR STEEL AND COPPER ALLOYS DLCPS IDENTIFICATION OF CRITICAL STRUCTURAL COMPONENTS&STRUCTURAL COMPONENTS F MLCPS PART MARKING NEWLCPS MATERIAL SUBSTITUTIONS FOR MODEL 45 AIRCRAFT APLCPS MATERIAL SUBSTITUTIONS FOR MODEL 45 AIRCRAFT (AMENDMENT) APLCPS SPEC EQUIVALENCE FOR DEHAVIALLLAND SPECS FOR MODEL 45 AIRCRAFT HLCPS BOMBARDIER DOCS APPROVED FOR USE BY LEARJET ON LJ DESIGNED AIRCRAFT NEWLCPS SPEC EQUIV FOR BOMBARDIER PROCESS SPECS FOR USE ON LJ DESIGNED AIRCRAFT ALCPS CRITICAL PROCESSES FOR VENDOR SUPPLIED PARTS ALCPS REQUIREMENTS FOR SUBCONTRACTORS USING LJ CONTROLLED PROCESSES C

Comments

Update 04/01/16

Update 04/01/16

Update 04/01/16

Update 04/01/16

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.LOCKHEED MARTIN SPECIFICATIONS

SPEC16PR070

16PR711 APPENDIX B16PR711 APPENDIX E16PR711 APPENDIX F16PR711 APPENDIX G

2GNA000012ZZP000032ZZP000062ZZP000085PTPNG01FPS-3033FPS-3090LAC0170LAC1005LACG14

LMA-D0006LMA-M7050LMA-PC007LMA-PC008LMA-PC009LMA-PC201LMA-PG001

M001NDTS-1101NDTS-1500NDTS-1502STP51-400STP53-201STP54-101STP63-001

MATERIAL SPECIFICATIONSSPEC

CMFS003CMFS004CMFS008CMFS010CMFS011CMFS012CMFS013CMFS016CMFS017CMFS018CMFS020CMFS022CMFS024CMFS025CMFS026CMFS027CMFS029CMFS031CMFS032CMFS033

CMFS034CMFS035CMFS036CMFS037CMFS038CMFS039CMFS040CMFS043CMMP003CMMP005CMMP007CMMP010CMMP011CMMP012CMMP013CMMP014CMMP015CMMP017CMMP018

CMMP019

CMMP020CMMP021CMMP022CMMP025CMMP028CMMP030CMMP032

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.LOCKHEED MARTIN SPECIFICATIONS

DESCRIPTIONFINISH CODES FOR F-16 AIR COMBAT FIGHTERMILITARY SPECIFICATIONSLMTAS MATERIAL SPECIFICATIONS (FMS)LMTAS PROCES SPECIFICATIONS (FPS)LMTAS NONDESTRUCTIVE TEST STANDARDS (NDTS)

ENGINEERING REQUIREMENTS FOR MACHINED PARTS

CLEANING OF PARTS AND MATERIALS

AIRCRAFT FINISHES, CODING SCHEMEENGINEERING MATERIALS & APPROVED PRODUCTS

PENETRANT INSPECTION

CONDUCTIVITY TESTING

APPROVED MANUFACTURER LIST FOR STANDARDPARTSCONTROL OF F-35 AIR VEHICLE CRITICAL PARTS,GENERAL SPECIFICATION FORMARKING SPECIFICATION FOR THE F-35 AIRCRAFT ANDSUPPORT EQUIPMENTMARKING SPECIFICATION FOR F-22 AIRCRAFT ANDSUPPORT EQUIPMENTCHROMIC ACID ANODIZE TREATMENT FOR ALUMINUMALLOYSTHIN FILM SULFURIC ACID ANODIZE TREATMENT FORALUMINUM AND ALUMINUM ALLOYSPROTECTION OF MATERIALS AND PARTS IN PROCESSOF FABRICATION OR ASSEMBLY

ALUMINUM ALLOY PLATE, 7050-T7451 FRATCTURETOUGHNESS TESTEDREQUIREMENTS FOR MAGNETIC PARTICLEINSPECTION PROCEDURESREQUIREMENTS FOR ULTRASONIC INSPECTIONPROCEDURES FOR METALHARDNESS AND CONDUCTIVITY TESTING,NONDESTRUCTIVE METHODSREQUIREMENTS FOR FLUORESCENT PENETRANTINSPECTION OF METALLIC PARTS AND MATERIALSREQUIREMENTS FOR ETCH/CLEANING PRIOR TOPENETRANT INSPECTIONSURFACE ROUGHNESS AND TOLERANCES FORMACHINED SURFACESHARDNESS AND CONDUCTIVITY TESTINGNONDESTRUCTIVE METHODS FOR VERIFYING HEAT TREAT CONDITIONSTANDARD MACHINING PRACTICES, TOLERANCES ANDALLOWANCESPENETRANT INSPECTION, GENERAL REQUIREMENTSFORHEAT TREATMENT OF ALUMINUM ALLOYS FOR USE ONAIRCRAFTMARKING PARTS AND ASSEMBLIES FORIDENTIFICATION AND INSPECTION

MATERIAL SPECIFICATIONSDESCRIPTIONCAPS ZINC CHROMATE PRIMERCAPS WASH PRIMER-METAL PRETREATMENT COATINGCAPS POWDER COATINGS MATERIALSCAPS PRIMER SURFACER - CHEMICALLY CUREDCAPS BAKING ENAMELCAPS EPOXY ENAMELCAPS HEAT RESISTANT ENAMELCAPS HEAT RESISTANT PAINTCAPS ADHESIVE PRIMERCAPS PRIMER, VINYL, GRAYCAPS POLYURETHANE ENAMELCAPS CLEANING SOLVENTCAPS ACRYLIC MODIFIED POLYURETHANECAPS CORROSION PROTECTIONS PRIMER-INTERIOR/EXTERIOR STRUCTURESCAPS POLYURETHANE CORROSION RESISTANT PRIMERCAPS PHOSPHATE COATINGS COMPOUNDS FOR PHOSPHATING FERROUS METALSCAPS CORROSION PROTECTION PRIMERCAPS RAIN EROSION PRIMERCAPS INTUMESCENT FIRE-RESISTANT COATING COMPOUNDCAPS ANTI-STATIC COATINGS

CAPS WATER-BORNE INTERIOR DECORATIVE URETHANE PAINT SYSTEMCAPS CORROSION PRIMER: EPOXY, HI-SOLIDSCAPS CORROSION PRIMER: EPOXY, WATERBORNE (VOC COMPLIANT)CAPS COATINGS: POLYURETHANE, HI-SOLIDSCAPS COATINGS, ACRYLIC MODIFIED URETHANE, HI-SOLIDSCAPS SANDING SURFACERS, HI-SOLIDSCAPS PRETREATMENT PRIMER, EPOXY (VOC COMPLIANT)CAPS CHROME-FREE PRIMER SURFACERCAPS LEAD-ANTIMONY (FIVE PERCENT) ALLOYCAPS 409 STAINLESS STEEL SHEETCAPS PROCUREMENT REQUIREMENTS FOR LONG-LIFE CABLESCAPS OVERSIZE 7050 ALUMINUM ALLOY PLATECAPS ALUMINUM ALLOY SHAPS, EXTRUDED, 7075-O AND -W511CAPS PROCUREMENT REQUIREMENTS FOR TITANIUM MATERIALCAPS ALUMINUM ALLOY STEPPED EXTRS., 7075-T76544 AND 7050-T7652CAPS ALUMINUM ALLOY EXTRUSIONS 7050CAPS PRUCUREMENT REQUIREMENTS FOR TITANIUM MATERIALCAPS ALUMINUM ALLOY 6022-T4 SHEETCAPS ALUMINUM ALLOYS 6013

CAPS ALUMINUM ALLOY 2024-T4 KAISER TFORM, BARE AND ALCLAD SHEETCAPS ALUMINUM ALLOYS, FINE GRAIN QUALITY, SHEET AND COIL FORMCAPS 434 STAINLESS STEEL/5052 ALACLAD BIMETAL SHEETCAPS PROCUREMENT REQUIREMENTS FOR WROUGHT METALLIC MATERIALSCAPS ALUMINUM ALLOY 7175, FORGING, ANNEALEDCAPS OVERSIZE 7050 ALUMINUM ALLOY PLATECAPS PROCUREMENT REQUIREMENTS FOR ALUMINUM BAR AND ROD ROLLED, DRAWN OR COLD FINISHED

CAPS SURFACE QUALITY CHARACTERISTICS OF ALCLAD OR BARE ALUMINUM:FLAT SHEET AND COILED SHEET

NOTE: FOR SPECIFICATIONS FLOWED DOWN THAT ARE NOT CONTAINED IN THIS SPREADSHEET, CONTACT SHUTTLE AEROSPACE MANAGEMENT.LOCKHEED MARTIN SPECIFICATIONS Last Update

REVS Update 02/08/2018

53 Update 02/08/201853 Update 02/08/201853 Update 02/08/201853 Update 02/08/2018CU Update 02/08/2018F Update 02/08/2018F Update 02/08/2018E Update 02/08/2018B Update 02/08/2018B Update 02/08/2018B Update 02/08/2018

G11 Update 02/08/2018G8 Update 02/08/2018

G28 Update 02/08/2018G Update 02/08/2018E Update 02/08/2018A Update 02/08/2018- Update 02/08/2018L Update 02/08/2018G Update 02/08/2018B Update 02/08/2018

AA Update 02/08/2018H Update 02/08/2018K Update 02/08/2018K Update 02/08/2018E Update 02/08/2018N Update 02/08/2018

AA Update 02/08/2018T Update 02/08/2018

MATERIAL SPECIFICATIONSREV COMMENTS

BC Update 02/08/2018D Update 02/08/2018C Update 02/08/2018AAAAB Update 02/08/2018AA-AA Update 02/08/2018AAK Update 02/08/2018ABE Update 02/08/2018

E Update 02/08/2018C Update 02/08/2018-G Update 02/08/2018H Update 02/08/2018E Update 02/08/2018-A Update 02/08/2018A--CBGBGE-

E1

D

-CBV Update 02/08/2018BCC Update 02/08/2018