xs sight systems shotgun williams tactical ghost universal ...€¦ · orders/tech 800-741-0015...

Orders/Tech: 800-741-0015order on the web

brownells.com

Rifle

/sho

tg

un

sigh

ts

Convert your shotgun to a tactical workhorse. Banded front sight features green, tritium dot surrounded by a white ring. Supplied shims ensure barrel band clamps snugly around muzzle. Con-toured rear sight requires drilling and tapping; includes two interchangeable

aperture sizes. Completely adjustable for windage and elevation. abSPECS: Steel, black, matte finish. Front Sight - Tritium dot with white ring, 3/4" (19mm) high from top of barrel. Rear Sight - Base, 11/2" (38mm) long, 3/4" wide, 1" (25mm) long. Small aperture I.D., 3/16" (4.8mm); large aperture I.D., 7/32" (5.6mm). Fits Rem 870, 1100, 11-87 shotguns with .860-.885" (21.8-22.5mm) muzzle diameters.

XS SIGHT SYSTEMS REMINGTON SHOTGUN

TACTICAL GHOST RING SIGHT SETspeeds sight Acquisition

#006-000-107AT tactical ghost Ring sight set, 6K165K98 � � � � � � � � � � � � � � � � � � � � � � � � �$ 181.80

#006-000-118AT Banded front sight, only, 6K73J19 � � � � � � � � � � � � � � � � � � � � � � � � � � � 81.00

Give your favorite shotgun a more accurate, rifle-style sight picture in only minutes. Clamps to vent-rib; fast to install and fast to remove. Adjusts for windage and elevation. Front sight provides a red dot that glows in all ambient light conditions. The more light, the brighter it glows; won’t “wash out”, even in direct sunlight. U-Notch rear blade is equipped with a bright green rod on either side of the notch for precise, low-light sight alignment. abSPECS: Machined aluminum, black, anodized, matte. Universal fit for all shotguns equipped with 1/4" (6.3mm), 5/16" (7.9mm) and 3/8" (9.5mm) wide, vent ribs. Rear - “U” notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes wrench and instructions.

shotgun fiRe sights - Models for pre-2003 Remington 870/1100, Moss-berg 500, and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that’s easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. abSPECS: Machined aluminum, black, anodized. Rear - “U” notch fiber op-tic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Remington fits Remington shotguns with 3/8" dovetail front sight ramp.#962-565-300AT Remington fire sights, 2F23F49 � � � � � $ 24.99#962-000-001AT Mossberg fire sights, 2F25C95 � � � � � � 27.99#962-000-002AT Winchester fire sights, 2F27A76 � � � � � 28.99

ReMington ghost Ring fiRe sights - Bright, high contrast fiber optic sights with large aperture, rear ghost ring provide fast, accurate sight alignment in all light condi-tions. The more light, the brighter the beads glow. Front sight has a single red insert, rear ghost ring has two green inserts to form an easy-to-align, 3-dot sight picture. Fits Remington shotguns with 3/8" dovetail front sight ramp. abSPECS: Steel front 3/8" dovetail sight. Aluminum rear sight. Black, matte finish. Fiber optic insert. Bead - 1/16" (1.6mm) dia. Ghost Ring - .15" (3.8mm) dia. aperature.#962-000-083AT 2003 & earlier ghost Ring fire sights,

2F24E42 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 25.99

ithACA 37 fiRe sight - Contrasting, green rear and red front dots provide excellent sight visibility. Eye-catching colors give fast, accurate sight alignment against dark backgrounds. Fully adjust-able for windage and elevation; replaces factory rear sight and front bead. Fits Deerslayer models, no gunsmithing required. Metal body con-struction for durable service. abSPECS: Aluminum, anodized, matte black. Rear - 21/2" (6.4cm) long, fits nominal 3/8" dovetail. Front blade - 5/8" (15.9mm) long.#962-000-017AT ithaca 37 fire sight, 2F32E14 � � � � � � � � �$ 34.99

WILLIAMS

UNIVERSAL “SLUGGER” FIRE SIGHT

#962-000-014AT universal slugger fire sight, 2F30N01 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 31.99

Quickly turns Rib-equipped shotguns

into slug gunsIncludes green tritium front sight and two, interchangeable, fully

adjustable, rear ghost ring apertures to accommodate long- and short-range shooting. Steel wings give added rear sight protection. Dovetailed front sight fits factory sight ramp with minor fitting. abSPECS: Steel, blue, matte finish. Tritium dot/white ring front sight, 3/8" (10mm) high. Rear Sight – base, 11/2" (38mm) long, 3/4" (19mm) wide, 1" (25mm) long. Small Aperture I.D. - 3/16" (4.8mm); Large Aperture I.D. - 7/32" (5.6mm). Rear sight requires drilling and tapping, front sight requires sight ramp.

XS SIGHT SYSTEMS SHOTGUN

TACTICAL GHOST RING SIGHT SETfor tactical & hunting use

stoCK # fits PRiCe#006-000-108AT Rem. 870/1100/11-87 6K143N80 $ 157.50#006-000-109AT Mossberg 500/590, Ithaca 37 6K133I53 $ 144.00

— Advise # — tactical sight set, 6K143N80 � � � � � � � � � $ 157.50

High-visibility Tritium dot front sight surrounded by a large white ring helps improve target focus and low light sight ac-quisition and sight recovery after muzzle flash. Installs over existing front sight beads from .125" - .140" diameter by filling the cavity on the underside of the sight with Brownells Acraglas Gel, then press-ing the sight over the bead and allowing it to fully cure. If existing bead is too small or too large, replace with Brownells #6 bead for 3-56 threads or #26 for 6-48 threads. Some shotgun barrels may require drilling and tapping of existing hole to 6-48 for installation of #26 Brownells bead. Remington Pedestal model with stepped bot-tom fits Remington shotgun barrels with front sight pedestal. Vent Rib model with flat bottom fits shotgun barrels with ventilated ribs. Plain Barrel model with cupped bottom fits round shotgun barrels. Includes instructions. abSPECS: Machined steel, black, matte finish. Big Dot .161" (4mm) diameter. Fits beads from .125" (3.2mm) to .140" (3.5mm). Remington Pedestal fits Remington front sight pedestals. Vent Rib fits ventilated ribs. Plain Barrel fits round barrels. Includes instructions.

XS SIGHT SYSTEMS SHOTGUN

BIG DOT TRITIUM FRONT SIGHTinstalls easily over the

existing Bead sight

#006-000-158AT Remington Pedestal Big Dot tritiuim, 6K58A23 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.90

#006-000-159AT Vent Rib Big Dot tritium, 6K58L23 � � � 63.90#006-000-160AT Plain Barrel Big Dot tritium,

6K58M23 � � � � � � � � � � � � � � � � � � � � � � � � � � 63.90

Heavy duty Picatinny rail with integral ghost ring sight naturally centers for fast target acquisition during tactical ops. Front sight features a blade with white dot and solid steel side guards for maximum protec-

tion. Aperature is fully adjustable for windage and elevation using clearly marked adjustment screws that hold under heavy recoil. Front sight

is adjustable for elevation with included tool. Rail allows mounting or scopes and red dot sights. Designed for non-ribbed barrels. abSPECS: Fits Remington 870/1100/11-87 shotguns with non-ribbed bar-rels. Front sight requires soldering with Silvaloy 355 (not included). Ghost ring/rail requires drilling and tapping receiver for 8-40 tpi screws. Includes mounting hardware and instructions. Front Sight - Steel, in-the-white, .110" (2.8mm) diameter white dot. Ghost Ring/Rail - One-piece, hard anodized aluminum sight body and rail. 2.2 oz.(62.4g) weight. Rail - 23/4" (7cm) long x .830" (21mm) wide. Aperature - Steel, black. .23" (5.8mm) I.D. .5" (mm) high from top of receiver to center of aperature.

VANG COMP SYSTEMS REM 870/1100/11-87

GHOST RING SIGHTS

#100-003-640AT Rem. 870/1100/11-87 ghost Ring front sights, 6K61B91 � � � � � � � � � � � � � � $ 69.99

#100-004-335AT Rear ghost Ring sight w/Rail, 6K180P12� � � � � � � � � � � � � � � � � � � � � � � � � � 189.99

extremely Rugged; Provides fast target Acquisition

Steel, screw-on/sol-der-on ramps with stan-dard 3/8" dovetail and a checkered rear surface to cut glare. .4375" radius designed for 12 gauge barrels with .875" outside diameter. abSPECS: Steel, blued, matte finish. 13/4" (4.4cm) long x .612" (15.5mm) wide. Heights - 1/8" (3.1mm), 3/16" (4.7mm), 3/8" (9.5mm). Accepts narrow ramp sight blades.

WILLIAMS

SHOTGUN SHORTY RAMP

Mounts Rifle sights on Plain Barrel shotguns

#962-011-125AT shorty Ramp, 1/8", 2F21F99 � � � � � � � � � � $ 22.99#962-011-187AT shorty Ramp, 3/16", 2F21M99 � � � � � � � � � 22.99#962-011-375AT shorty Ramp, 3/8", 2F22A65 � � � � � � � � � � 24.99

Easy-to-install tactical sight set has a Picatinny-rail section with ghost ring rear sight and banded front sight. Picatinny rail is pre-drilled for factory optic mount holes. Ghost ring is adjustable for windage and elevation. Banded front sight post has a Tritium dot for visibility in all light conditions. Fits barrels less than 8.860" in diameter that do not have a front sight rib or base. abSPECS: Picatinny Rail – Aluminum, anodized, black. Front/Rear Sights - Stress-proof steel, black oxide finish. Fits barrels with .840" to .860" O.D.

gives Your shotgun A Rifle-style sight Picture

#006-000-185AT Mossberg 500/590/930 shotRail, 6K162N66 � � � � � � � � � � � � � � � � � � � � � � � � $ 180.00

#006-000-186AT Rem 870 shotRail, 6K162E66 � � � � � � 190.80

XS SIGHT SYSTEMS REM 870/MOSS 500

SHOTRAIL

It’s been several years since there was a good, do-it-yourself product on the market for making sight inserts, so we decid-ed the best way to fill the gap was to go out and de-velop our own. The result is our latest “assist” for the professional gunsmith and

serious hobbyist - a kit with everything you need to add, change, or rebuild colored front sight inserts on revolvers quickly and easily. Although primarily designed for wheelguns, it’ll also let you make custom inserts for a variety of rifles, shotguns, and pistols. Sight in-serts offer many benefits for target shooters and hunters, especially in situations requiring fast, accurate front sight acquisition, like dawn and dusk, when game is more likely to be active. Never again replace a perfectly good front sight because it’s too hard to see in low light, your eyes aren’t as good as they used to be, or because the insert has faded, broken, or fallen out. Our kit contains everything you need to make professional looking inserts formed to the exact contours of your gun’s front sight. Mix the liquid acrylic and powdered activator with the concentrated dye to create bright, high-contrast inserts that are stronger and more durable than factory originals at a frac-tion of the cost of replacement or custom sights. Kit includes dyes in five popular colors—red, green, orange, yellow, and white. Step-by-step instruction booklet show you how to mix the ingredients (the ratios aren’t that critical so it’s tough to screw up) and create forms to install inserts that won’t shoot loose, even on the hardest recoiling guns. We also explain, in detail, how to hand cut a dovetail for an insert on a gun that doesn’t already have one. With a hardening time of around 20 minutes, it’s so fast and easy you’ll want to add in-serts to get the best accuracy and maximum versatility from all your iron-sighted guns. Refill supplies sold separately, so you can replace only the ingredients you use up rather then buy a whole new kit. abSPECS: Kit contains: 1 oz. (29.57 ml) Liquid Acrylic; 2 oz. (59.15 ml) Pow-dered Activator; .05 oz. (1.5 g) each of red, green, orange, yellow, and .19oz. (5.3g) of white pigment; 5 mixing cups; complete instructions.

FRONT SIGHT INSERT KIT

#081-000-370AT front sight insert Kit, 1H48N16 � � � � � $ 60.99#081-000-371AT Powdered Activator, 2 oz., 1H8I12 � � � 12.47#081-000-372AT liquid Acrylic, 1 oz., 1H16H93 � � � � � � � 20.97#081-000-375AT Red Pigment, .05 oz., 1H3H85 � � � � � � � 4.99#081-000-376AT orange Pigment, .05 oz., 1H3Q93 � � � 4.99#081-000-377AT White Pigment, .19 oz., 1H4E07 � � � � � 4.99

Make inserts Quickly & easily in A Variety of Colors

Tough, flexible coating provides a highly visible contrast between sights and target. Provides more accurate shot placement, improves sight picture and focal concentration on front sight. Du-rable, won’t harm firearms finish. Easy-to-apply five Color Kit for use on rifle, pistol and handgun sights. Three color, ghost glow Kit contains a light activated, luminescent coating for use in reduced visibility situations. abSPECS: 3cc glass bottles. Five Color Kit - Red, White, Green, Orange and Yellow, plus cleaner. Ghost Glow Kit - Green, Yellow and Orange colors plus Green, Yellow and Orange luminescent, light activators.

BRIGHTSIGHTS GUN SIGHT COATING

#100-000-243AT gun sight five Color Kit, 3K11H12 � � � $ 14.95#100-000-244AT gun sight ghost glow Kit, 3K16J31 � � 24.95

highly Visible Paint improves sight Contrast

hA

nD

gu

n sig

ht

s

Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

Everything you need to install or re-place a colored plastic front sight insert. Enough material for 228 Sight Inserts, plus files and complete, illustrated in-

structions. abSPECS: Kit Contains: PLASTIC SHEETS, 7 pieces, 2" (5.1cm) x 6" (15.2cm), one each, Black, White, Yellow, Orange, Traditional

Red (matches factory front sights), Fluorescent Red, and Fluorescent Green; 3-SQUARE NEEDLE FILES, one fine cut, one medium cut; NEEDLE FILE HANDLES, 2; INSTRUCTIONS.

SIGHT INSERT KITeasily install Colored Plastic front

sight inserts

#080-068-000AT sight insert Kit, 8K45G68 � � � � � � � � � � � $ 52.99#076-200-115AT instructions, 6G0G49 � � � � � � � � � � � � � � .49

stoCK # ColoR#080-068-069AT Black#080-068-070AT White#080-068-071AT Yellow#080-068-075AT Flo. Green

— Advise # — sight insert sheet, 8K8B36 � � � � � � � � � � � � $ 10.99

stoCK # ColoR#080-068-072AT Orange#080-068-073AT Red#080-068-074AT Flo. Red

Optical-grade, acrylic rods replace lost or broken

rods on popular fiber optic sights. Pak includes one each: red, green, and amber fiber optic rods. Available in four diameters: .060" diam-eter rod fits most shotgun sights and .125" wide pistol sights. .040" fits most rifle and some shotgun sights, plus .090" wide pistol sights. .030" and .020" rods fit competition-style, rifle sights. abSPECS: Optical-grade, acrylic rod. One each in red, green, amber. 6" (15.2cm) long. .060" (1.5mm), .040" (1mm), .030" (.75mm), or .020" (.5mm) dia.#100-001-459AT .060" fiber optic Rod, 3-pak,

1K20K93� � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 27.99#100-001-460AT .040" fiber optic Rod, 3-pak,

1K15D50� � � � � � � � � � � � � � � � � � � � � � � � � � � � 19.99#100-001-461AT .030" fiber optic Rod, 3-pak, 1K7C79 � � 9.75#100-001-462AT .020" fiber optic Rod, 3-pak, 1K6B40 � � 8.25

Restore fiber optic sight’s Bright, glowing Dot

MOUNTING SOLUTIONS PLUS

FIBER OPTIC SIGHT RODS

High-pigment sight paints allow the iron sight shooter to add, change or touch-up sight colors in as little as 60 minutes. Greatly improves sight acquisition, shooter focus, and helps shooters tailor their sights

for competition, hunting or self defense. Coating dries flexible to resist chipping and will not fade over time. Great for adding color to new gun sights and archery sight pins, or touching up worn, or chipped sights on all types of weapons. Easy-to-use needle applica-tor bottle puts the exact amount of paint right where you want it – no waste and no paint brush required. Shake bottle, apply and allow 1 hour to dry. One bottle paints a lifetime of sights. abSPECS: 1/4 oz. (7.4 ml) needle applicator bottle. Available in Red, White, Neon Green, Neon Yellow and Safety Orange.

KG INDUSTRIES SITE KOTEChange sight Colors instantly;

great for touch-up or Changing Colors to Match Conditions

#665-000-010AT Red site Kote, 5F10K53 � � � � � � � � � � � � � �$ 12.99#665-000-011AT White site Kote, 5F10F53 � � � � � � � � � � � � 12.99#665-000-012AT orange site Kote, 5F10G53 � � � � � � � � � � 12.99#665-000-016AT neon Yellow site Kote, 5F10M53 � � � � � 12.99#665-000-015AT neon green site Kote, 5F10H53 � � � � � � 12.99

Refurbish fiber optic sights by replacing broken or damaged rods, or change sight colors to enhance the sight picture with these super-bright replacement rods. Sold in 6" lengths; cut to fit your needs. Available in red or green in four common diameters (see table). abSPECS: Fiber optic rods, red or green. 6" (15.2cm) long. 1 rod per pak.

REPLACEMENT FIBER OPTIC RODS

stK# ReD stK# gReen DiAMeteR PRiCe#080-000-727AT #080-000-728AT .020" (.5mm) 9A3H37 $ 3.99#080-000-725AT #080-000-726AT .030" (.75mm) 9A3E37 $ 3.99#080-000-729AT #080-000-730AT .040" (1mm) 9A4K18 $ 4.99#080-000-731AT #080-000-732AT .060" (1.5mm) 9A4L18 $ 4.99

super Bright for enhanced sight Picture

Drop-in front and rear sights upgrade your Glock for fast target acquisition and precise shooting in low-light conditions. Rear faces of both sights feature 40 LPI serrations to cut glar for a crisp visual focus. Rear sight U-notch really speeds up sight picture acquisition, even under stress. Front sight has bright green Tritium insert that glows in low light, but looks like a traditional white dot in bright light. Includes mounting hardware. abSPECS: Front Sight - .215" (5.4mm) high, .115" (2.9mm) wide. Rear U-Notch - .140" (3.5mm) wide.

10-8 PERFORMANCE

U-NOTCH NIGHT SIGHT SET for GLOCK®

helps You shoot Your glock More Accurately in Dim light

#100-012-444AT u-notch night sight, 1B107C15 � � � � $ 114.99

The Hackathorn sight sets feature a plain black, serrated rear sight matched with a green tritium front centered in a high-visi-bility orange ring that helps you align the sights and get the shot off quickly, even in low light. The extra-wide, .140" front blade and .180" wide rear notch are perfect for rapid fire strings and for engag-ing multiple targets at close range. Available to fit Glocks and the Springfield XD/XDM. abSPECS: Steel, black nitride finish. Green tritium insert with orange outline on front sight only. GL-433 fits Glock 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, 39. GL-434 fits 20, 21, 29, 30, 31, 32, 36. XD-433 fits Springfield XD and XDM models.

AMERIGLO HACKATHORN SIGHT SETS for GLOCK® & XDWide notch Rear Combined

With orange-Ringed, tritium front for

faster sight Alignment

#100-010-620AT gl-433 glock hackathorn set, 4K73G54 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 77.99

#100-010-621AT gl-434 glock hackathorn set, 4K73M18 � � � � � � � � � � � � � � � � � � � � � � � � � � � 77.99

#100-010-619AT XD-433 springfield hackathorn set, 4K73D18 � � � � � � � � � � � � � � � � � � � � � � � � � � � 77.99

Cleanly machined from hardened, steel bar stock to better resist the wear and tear caused by daily holster carry. Black salt

bath nitrocarburizing finish is equivalent to the slide’s factory finish and provides addi-tional hardness and corrosion protection. u-notch M&P Rear sight and u-notch M&P shield Rear sight eliminate the distracting bottom corners of traditional sights for fast alignment with fiber optic, Tritium dot, and brass bead front sights of factory height. 40 lpi serrations on the blade face reduce glare in sunny conditions. Upper corners are machine chamfered to prevent snagging on holster or clothing. Centrally located set-screw secures sight in factory dovetail. In-cludes wrench and instructions. May require minor fitting. ab

SPECS: Hardened 4140 steel, black, matte, salt bath nitrocarburizing fin-ish. M&P Rear Sight - .895" (2.3cm) long x .730" (1.9cm) wide. Notch - .140" (3.5mm) wide x .100" (2.5mm) high. Fits all calibers, sizes of Smith & Wesson M&P pistols, except M&P22, M&P SHIELD and M&P C.O.R.E. M&P Wide u-notch Rear sight - .895" (2.3cm) long x .741" (1.9cm) wide. Notch - .156" (3.9cm) wide x .100" (2.5mm) high. Fits all calibers, sizes of Smith & Wesson M&P pistols. M&P Shield Rear Sight - .901" (2.3cm) long x .693" (1.8cm) wide. Notch - .140" (3.5mm) wide x .100" (2.5mm) high. Fits M&P SHIELD 9mm/.40-cal. models.

10-8 PERFORMANCE S&W M&P/M&P SHIELD™

FRONT & REAR SIGHTS

M&P Rear

#100-003-171AT M&P Rear sight, 1B47I28 � � � � � � � � � � � $ 49.99#100-012-442AT M&P Wide u-notch Rear sight,

1B46M36 � � � � � � � � � � � � � � � � � � � � � � � � � � 48.75#100-012-440AT M&P shield Rear sight, 1B46K81 � � � � � 48.75

M&P SHIELD Rear

M&P SHIELD Rear

Rugged Construction; u-notch Provides fast Alignment With front sight

Extra long, fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Five heights, for use with, fixed and adjustable, ghost ring, v-notch and conventional sights. Includes green, yellow and red optic rods. abSPECS: Steel, black, matte finish. Kimber/Novak, 65° x .330" x .075" dove-tail. .127" (3.2mm) wide, .150" (3.8mm), .160" (4mm), .175" (4.5mm), .200" (5mm), .240" (6mm) high. .820" (21mm) long.

Bright Red sight holds Your eye on target

#985-000-001AT .150" lightning Rod sight, 5H31A60 � � $ 34.99#985-000-002AT .160" lightning Rod sight, 5H31F60 � � 34.99#985-000-003AT .175" lightning Rod sight, 5H31K60 � � 34.99#985-100-330AT .200" lightning Rod sight, 5H31G60 � � 34.99#985-000-004AT .240" lightning Rod sight, 5H31L60 � � 34.99

BRAZOS CUSTOM

LIGHTNING ROD SIGHT

Easy to use aerosol goes on easy and dries quickly to a black velvety finish. Wipes off easily and won’t harm fine finishes or precision sights. Great for hunting, skeet, trap and target shooting. abSPECS: Aerosol can, 8¼ oz. (233g) net contents. Cannot ship outside continental U.S. UPS or FedEx ground only within U.S.

BIRCHWOOD CASEY SIGHT BLACKstops the glare on sights,

Barrels & other Metal surfaces

#167-000-059AT sight Black, 1K7Q34 � � � � � � � � $ 7.99

An alternative to traditional sights, Pro I-DOT sights encourage accurate, instinctive sight align-ment without taking the time to line up a three-dot sight picture. Simply position the top dot directly above the bottom dot on the target and squeeze the trigger! Tritium inserts and photo lumines-cent front-sight outlines make these sights visible in all light condi-tions – day or night. glock set features a green rear dot and a green front sight with a lime-green outline. smith & Wesson (s&W) set has a green rear dot and a green front sight with an orange outline. abSPECS: Machined steel, matte black finish. Fits factory dovetails. Glock - .199" front blade height. Fits models 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38 and 39. S&W - .159" front blade height. Fits S&W M&P.

AMERIGLO PRO I-DOT SIGHTS

Vertical two-Dot system enables Quick sight

Alignment

#100-010-617AT glock Pro i-Dot sights, 4K94H19 � � � � $ 99.99#100-010-616AT s&W Pro i-Dot sights, 4K94G19 � � � � � 99.99

Proven performance and state-of-the-art design for bull-barreled PPC and Combat revolvers. Rib top is serrated and blade notch beveled to reduce glare. Durable front blade. Matte blue finish. Screws and instructions included. Gunsmith installation required. ab

tRi-set CoMPetition sight RiB - Rear Adjusting

Features the unique Aristocrat Poly-Set slotted cam system which allows selection of 3 pre-set rear sight positions for standard PPC and Combat distances. Can be reset to any of those distances with a quick, easy movement of the elevation cam. Rear sight also has windage adjustment and an extra elevation screw to compensate for light or ammo changes. SPECS: Blued steel. Approx. .7" (18mm) wide. Fits Ruger Speed Six and S&W “K” w/6" (15.2cm) long, .950" (24.1mm) - 1.062" (27mm) diameter bull barrels. 81/4 oz. (234 g).#044-007-206AT tri-set ts-6-t Aristocrat Rib,

4D197L88 � � � � � � � � � � � � � � � � � � � � � � � � $ 214.95

AsR-6 sight RiB - single screw, Rear AdjustingSimple, precise, tra-

ditional-style, adjustable rear sight on Aristocrat’s rugged base. Winged front sight, serrated rib top, smooth rear blade face. Beveled rear notch and flared front post for reduced glare; sharp, clear sight picture. SPECS: Blued steel. 11/16" (17.5mm) wide. 83/8" (21.3cm) long. Fits Ruger Speed Six, S&W “K” w/6" (15.2cm) long, .950" (24.1mm) -1.062" (2.7cm) diameter bull barrels. 81/4 oz. (234 g).#044-007-106AT AsR-6 Aristocrat sight Rib,

4D155Q17 � � � � � � � � � � � � � � � � � � � � � � � � $ 169.99

1911 Auto sight RiB - Rear Adjusting

Unique, steel, front-and-rear, sight system features a knurled cam that turns to select from three sight elevations. Underside of ribs internally hollowed to save weight. Durable, steel front sight won’t snag and break off. Rear sight also adjusts for windage. Available for Govt. Model and Govt. Model with long slide. SPECS: Steel, blued. Govt. Model - 71/8" (18.1cm) long; fits 1911 Auto Gov-ernment Model with 5" barrel. Govt. Model Long - 81/4" (21cm) long; fits 1911 Auto Government Models with long slides and 6" barrel.#044-000-023AT govt. Model Auto 5" Rib,

4D223I38 � � � � � � � � � � � � � � � � � � � � � � � � � $ 235.95#044-000-024AT govt. Model long Auto 6" Rib,

4D223C38 � � � � � � � � � � � � � � � � � � � � � � � � 235.95

ARISTOCRAT

REVOLVER & SEMI AUTO RIBSfront & Rear Adjusting Ribs for Bull Barrel Revolvers

hA

nD

gu

n s

igh

ts


brownells.com

Combat Application Pistol (CAP) sights have two bright, un-

mistakable sight reference points that enable rapid target acquisi-tion under all light conditions. Bright, lime green photoluminescent paint surrounds a self-illuminating Tritium dot in the front, with a

AMERIGLO

CAP SIGHT SET FOR GLOCK®

eye-Catching, luminescent sights With tritium front

#100-010-622AT gl-614 CAP sight set, 4K69F66 � � � � � $ 74.99#100-011-180AT gl-615 CAP sight set, 4K69N66 � � � � � 74.99

matching horizontal Tritium bar in the rear. Painted areas glow for several minutes after exposure to ambient light to give the shooter’s eyes time to adapt in low light. Steel sight body has black nitride finish that matches your pistol and gives maximum durability and corrosion resistance. abSPECS: Steel, matte black nitride finish, lime green photoluminescent accents. GL-614 fits Glock 17/19/22/23/24/26/27/33/34/35/37/38/39. GL-615 fits 20/21/29/30/31/32/36.

Fixed, low-profile combat sights are drop-in replacements for factory sights and feature streamlined contours with rounded corners to help prevent snags and hanging-ups. Precision-machined steel sight bodies sit low in the slide to resist catching on clothing during the draw, yet stand up to the abuse of hard operational and competition use. ab

sights for gloCK® - Night sights have two self-illuminating, Trijicon® Tritium inserts in the rear sight and one in the front blade to provide an easy-to-see, 3-dot sight picture in low-light conditions. Helps you acquire the sights and get on target quickly under stress. Works like a simple, 3-white-dot system for enhanced visibility in daylight. Nothing to turn on: as the ambient light gets lower, the Trijicon® Tritium dots start glowing. Classic Tritium sights have standard-width rear notches, and green front and rear dots. Pro series night sights have an extra-wide rear notch that allows more light around the front blade to speed target acquisition. Rear sight face extends all the way to the back of the slide for maximum sight radius. Wedge-shaped rear sight body has fully rounded edges and sits low in the slide to resist snagging on clothing during the draw. Green front sight insert; available with Green or Yellow rear dots. ghost Ring rear aperture sight uses the eye’s natural ability to center objects in a circle to aid in fast target acquisition. Tritium dots on each side of the ghost ring are smaller than the front sight dot to eliminate confusion during sight alignment. Green front sight insert; available with Green or Yellow rear dots. Plain Black front sights have traditional, fine-line serrations on the rear face to help prevent glare. Can be used in conjunction with Night Sights for distinctive dot/no-dot combination sight pictures.SPECS: Machined steel, matte black finish. Plain Black – Front: .450" (11mm) long, .090" (2.9mm) wide, heights indicated in table. Night Sights available with green front/green rear (G/G) or green front/yellow rear (G/Y) dots. Classic Night Sights – Front: .450" long, .140" (3.6mm) wide, .165"(4.2mm) high. Rear: .315" long, .830" wide, .150" (3.8mm) wide notch. Pro Series – Front: .450" long, .125" (3.2mm) wide, .160" (4.1mm) high. .11" (2.8mm) diameter green Tritium dot. Rear: .650" (16.5mm) long, .720" (18.3mm) wide with .180" (4.6mm) wide notch, and two .070" (1.8mm) diameter Tritium dots. Ghost Ring – Front: .450" long, .125" wide, .240" (6.1mm) high. .11" diameter green Tritium dot. Rear: .700" (17.8mm) long, .740" (18.8mm) wide, with .270" (6.8mm) diameter aperture and two .050" (1.3mm) diameter Tritium dots.

fits DesCRiPtion stoCK # PRiCe17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, & 39 Classic Tritium, G/G #100-004-575AT 4K81G70 $ 84.99

Pro Tritium, G/G #100-004-576AT 4K91J15 $ 96.99Pro Tritium, G/Y #100-004-206AT 4K91F09 $ 99.99Ghost Ring Tritium, G/G #100-004-204AT 4K73H56 $ 76.99

20, 21, 29, 30, 31, 32, 36 Classic Tritium G/G #100-014-494AT 4K83B34 $ 88.00Pro Tritium, G/G #100-004-577AT 4K87F68 $ 90.99Pro Tritium, G/Y #100-004-207AT 4K82G39 $ 84.99Ghost Ring Tritium, G/G #100-004-205AT 4K73A56 $ 76.99

42/43 Classic Tritium G/G #100-014-495AT 4K83B34 $ 88.00All Glocks Rear Tritium, Green, .394 high w/.150" wide notch #100-004-572AT 4K53A05 $ 55.95

Front Tritium, Green, .315" high x .140" wide #100-004-569AT 4K42B22 $ 44.99Front, Plain Serr, .165" high x .090" wide #100-004-570AT 4K23G64 $ 27.99

AMERIGLO SEMI-AUTO PISTOL SIGHTSlow-Profile Combat sights in Plain Black or With tritium Dots

Classic

Plain Black Front

ClAssiC tRitiuM sets foR otheR Pistols - Drop-in replacements for factory sights have three-dot Tritium insert system for optimal low-light visibility. Easy-to-see white rings surround each Tritium dot for enhanced daytime visibility.SPECS: Machined steel, matte black finish. G/G - green front/green rear. G/Y - green front/yellow rear.

Ghost Ring

Pro Series

BoWie tACtiCAl sights foR M&P - Designed for AmeriGlo by well-known M&P customizer David Bowie for a sleek, ultra-low-profile fit on the Smith & Wesson M&P pistol. The rear sight notch is wider and deeper than the factory notch to help you get the front sight centered ASAP. Rounded corners prevent snagging that can impair the draw from concealment.SPECS: Machined steel, matte black finish. Front - .435" (11.1mm) long, .140" (3.6mm) wide, .230" (5.8mm) high. Rear - .875" (22.2mm) long, .720" (18.3mm) wide rear face, .235" (6mm) overall height above slide, .164" x .115" notch. Available with green front/green rear sight (G/G) or green front/yellow rear (G/Y).#100-004-565AT Bowie tactical tritium set, G/G, 4K89H21 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 92.99#100-004-566AT Bowie tactical tritium set, G/Y, 4K89M12 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 92.99

#100-014-506AT Beretta nano night sight set, G/G, 4K83D34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 88.00#100-014-502AT fnh fnP/fnX .45 ACP night sight set, G/G, 4K83D34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 88.00#100-014-503AT fnh fns/fnX 9mm night sight set, G/G, 4K83P34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 88.00#100-014-505AT fnh fns/fnX .40 night sight set, G/G, 4K83D34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 88.00#100-014-498AT s&W M&P shield night sight set, G/G, 4K90L88 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 96.00#100-014-496AT springfield XD/XDM night sight set, G/G, 4K83J34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 88.00#100-004-190AT springfield XD/XDM night sight set, G/Y, 4K80P50 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 83.99

hA

nD

gu

n sig

ht

s

Fixed combat sights are drop-in re-placements for factory sights and are made extra tall to provide enough clear-ance for pistols equipped with a compensatory or suppressor. They also enable co-witnessing through a Trijicon RMR or similar red dot sight. Available in plain black or with green Tritium inserts that produce a classic, horizontal three-dot picture. Sold as front/rear sight sets. abSPECS: Machined steel, non-reflective matte black finish. Fits all Glock pistol models. Front: .450" (11mm) long, .125" (3.2mm) wide, .315" (8mm) high. Rear: .315" (7.9mm) long, .835" (21.2mm) wide, .305" (7.75mm) high. Tritium inserts: .070" (1.75mm) diameter.

AMERIGLO

SIGHT SETS for GLOCK®

extra height to Clear sound suppressor or Co-Witness With Red Dot

#100-009-854AT extra-high glock sight set, Plain Black, 4K41J95 � � � � � � � � � � � � � � � � � � � � $ 49.99

#100-009-851AT extra-high glock sight set, Green Tritium, 4K81M70 � � � � � � � � � � � � � � � � � � 84.99

Speeds your draw plus provides faster target ac-quisition. Threaded, rear dovetail filler block allows fast changing of rear sights.

Front sights attach with a single locking screw. abSPECS: Steel, blued, matte finish. Sight heights same as factory. +0 sights fit Glock 17, 19, 22, 23, 24, 34, 35. +1 sights fit Glock 20, 21, 29, 30, 31, 32, 33, 36. Rear sights only can be used with factory fronts. Includes screws, hex wrench and instructions.

ARo-teK night sights - Tritium-filled green vials provide an increased sight picture in low light conditions. Front and rear dots are green. Front dot is brighter than the rear dots. #066-010-132AT +0 night sight set, 6F88A48 � � � � � � � � �$ 97.99#066-010-133AT +1 night sight set, 6F88L48 � � � � � � � � � 97.99#066-001-053AT green front night sight, 6F43N33 � � � � 47.99

ARo-teK tARget sights - Low reflection, serrated fronts for sharp, clear target definition. Available with Black Rear/Serrated Front (Bs) or 3-Dot (tD).#066-011-102AT +0 Bs sight set, 6F47J30 � � � � � � � � � � � $ 49.99#066-011-122AT +0 tD target sight, 6F52P23 � � � � � � � � 54.99

ARO-TEK™ ARO-SIGHT for GLOCK®

sleek, no-Drag, Drop-in gives Clean sight Picture

Complete rear sight kit replaces the standard blade on your Smith & Wesson revolver and provides a wide, V-shaped notch. Enables faster pick up of the front sight, especially with fine bead and ball front sights. Adjustable for windage. abSPECS: Kit contains sight blade, windage screw, nut, spring, and plug. Available in three blade heights: .122" fits J-frame only; .160" & .196" fit K, L, and N-frame. Blade heights measured from bottom to top of blade, not including lug.

S&W

V-NOTCHED REAR SIGHT KITS

#078-003-002AT .122" V-notch sight Kit, J-Frame, 8G18I53 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 19.99

#078-003-004AT .160" V-notch sight Kit, K/L/Nframe, 8G21P84 � � � � � � � � � � � � � � � � � � � � � � � � � � � 24.99

#078-003-005AT .196" V-notch sight Kit, K/L/Nframe, 8G21K84 � � � � � � � � � � � � � � � � � � � � � � � � � � � 24.99

Complete Rear sight Replacement Kit

Rebuild and repair Smith & Wesson rear sights with ease. The kit features the all the parts you need plus special tools to install them. The S&W Sight Nut Spanner is a MAGNA-TIP® bit that fits the windage nut. The S&W Sight Staking Punch eliminates the chance the rear sight will come off when adjusting the windage on Smith & Wesson revolvers. abSPECS: Punch - S2 tool steel, black oxide finish. 4" (10.2cm) long, 3/8" (9.5mm) dia. Kit includes: (6) Windage Nuts, (6) Windage Screws, (6) Plungers, (6) Plunger Springs, (6) Elevation Studs, (6) Spring Clips, (2) S&W Sight Nut Spanner bits, (1) S&W Sight Staking Punch.

SMITH & WESSON DELUXE REAR SIGHT REBUILD KIT

everything You need to Rebuild s&W Rear sights

#080-000-090AT s&W sight staking Punch, only, 8K14E03� � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 14.99

#078-000-040AT s&W Deluxe Rear sight Rebuild Kit, 8G96G54 � � � � � � � � � � � � � � � � � � � � � � � � � � � 103.99

Heavy duty front sight is over-engineered with the needs of the tactical operator in mind. Plain, black blade incorporates an integral “gusset” of reinforcing metal between the base and the blade for additional strength that helps prevent breakage. Ideal choice for pistols used during room clearing operations or close quarter battle. Fits in the standard Novak-style front dovetail cut. Pre-drilled for vertical roll pin. abSPECS: Machined steel, matte black finish. Blade - .295" (7.3mm) high, .125" (3.1mm) wide. Fits standard .330" x 65° Novak front dovetail cut. Includes stainless steel roll pin.

CYLINDER & SLIDE

“STRONG” FRONT SIGHTextra Metal Prevents front sight failure;

fits novak Dovetail

#206-000-044AT “strong” front sight, 6K23N35 � � � � � � $ 24.99

Interchangeable, red or green, fiber optic insert glows brightly, drawing your eye to the sight for fast pickup and improved shoot-ing performance. Open center gathers lots of light for a bright dot. Three heights match most rear sights. Kimber and Para-ord replace factory height blades. Fits factory dovetails. abSPECS: Steel, black, matte finish. Blade - .125" (3.2mm) wide. Models for 65° x .330" x .070", 60° x .330" x .070" dovetails, plus Kimber Classic, and Para-Ord Limited.

stK# KiMBeR stK# PARA height PRiCe#296-000-004AT NA .150" 6B32H15 $ 34.99#296-000-006AT #296-000-008AT .175" 6B32L15 $ 34.99

sMith & Wesson ReVolVeR - Fits K, L and N frame with pinned front blade. Interchange-able, red and green rods let you choose the best color. abSPECS: Steel body, black, matte finish. 3/4" (19mm) long, .295" (7.5mm) high. .058" (1.5mm) diameter optic rod. Includes (1) red and (1) green rod. Requires drilling for cross pin hole.#296-000-039AT s&W fiber optic sight, 6B32P15 � � � � � $ 34.99

stK# 65° stK# 60° height PRiCe#296-065-160AT NA .160" 6B32C15 $ 34.99#296-065-185AT #296-060-185AT .185" 6B32H15 $ 34.99#296-065-200AT #296-060-200AT .200" 6B32G15 $ 34.99

enhanced sight Picture in Bright or low light

EGW HANDGUN

FIBER OPTIC FRONT SIGHT


SINCE 1939

hA

nD

gu

n s

igh

ts

Open-aperture uses your eye’s natural tendency to align concentric shapes; provides fast, accurate sighting in all conditions. Front sight with easy to see green, light-gathering Aro-Glow insert helps draw your eye toward the target. Smooth shape won’t snag.SPECS: Aluminum, black, matte finish. +0 .180" high front blade with green Aro-Glow insert, fits Glock 17, 19, 22, 23, 24, 34, 35. Includes screws, Allen wrench and instructions.

tRitiuM ghost Ring night sight sets foR gloCK - Two, green, tritium-filled vials in the rear plus a single tritium vial in the front blade provide an easy-to-find, 3-dot reference point.SPECS: Aluminum, black, matte finish, with green tritium inserts. +0 .180" high front blade, fits Glock 17, 19, 22, 23, 24, 34, 35. +1 .160" high front blade, fits Glock 20, 21, 26, 27, 28, 29, 30, 31, 32, 33, 36. Includes screws, Allen wrench and instructions.#066-012-001AT +0 tritium sights, Glock, 6F88A48 � � � �$ 97.99#066-012-002AT +1 tritium sights, Glock, 6F88D48 � � � � 97.99

ghost Ring night sight sets foR gloCK - Green, tritium-filled vial in the front blade works with the standard, Ghost Ring rear aperture to align quickly in both low and bright light.#066-012-170AT +0 g/R night sights, Glock,

6F86K66 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 95.99

ARO-TEK™

GHOST RING SIGHT for GLOCK®

Draws Your eye toward the target for faster,

More Accurate sighting

#066-012-160AT +0 g/R sight set, Green, 6F80I34 � � � � �$ 88.99#066-500-074AT g/R Rear sight, only, 6F53N26 � � � � � � � 58.99

The GSR rear sight rail is designed to fit any unmodi-fied Glock pistol and accept standard red dot optics with Picatinny mounts without

the need to modify or replace the factory slide to make the gun optics-ready. The op-

tional ambidextrous charging handle can be added for extra hand clearance when racking the slide with optics in place, and the mount has a generous front vertical surface that can be used for one-hand cocking in an emergency. SPECS: Aluminum, matte black anodized finish. Rail - 21/8" length, 1/4" height above slide. Mounting hardware and instructions included. Charg-ing handle – 19/16" length, 5/16" diameter on cocking handle.

STRIKE INDUSTRIES

REAR SIGHT RAIL & CHARGING HANDLE for GLOCK®

optic sight Mounting system for Your glock

#100-011-630AT glock sight Rail, 2H00ISG � � � � � � � � � � $ 50.00#100-011-632AT Charging handle, 2H00IYK � � � � � � � � � 6.00

Here’s every replaceable part contained in the rear sight as-sembly, conveniently packaged in time-and-money saving kits. ab

PARts Kit #1 - Windage screws must be broken anytime a standard sight blade is replaced; here are the replacements.SPECS: Single Pak contains 1 windage adjustment screw w/nut, 2 detent plungers and 2 springs. Six Pak contains 6 windage adjustment screws w/nuts, 6 detent plungers and 6 springs.#078-001-001AT s&W Parts Kit #1, each, 8G11B31 � � � � �$ 12.99#078-001-006AT 6 s&W Parts Kits #1, 8G57G78 � � � � � � � 69.99

PARts Kit #2 - The elevation stud and spring clip are the most commonly lost parts on a S&W rear sight.SPECS: Package contains one of each. Paks of one or six.#078-002-001AT 1 s&W Parts Kit #2, 8G5N06 � � � � � � � � � $ 5.99#078-002-006AT 6 s&W Parts Kit #2, 8G27Q30 � � � � � � � � 29.99

s&W sight nut sPAnneR - MAgnA-tiP® Bit, made to fit the windage nut that secures the S&W rear sight leaf. To use: Drill out staking, hold nut with Spanner and unscrew the screw. To install: Hold new nut with Spanner and seat screw. Always turn the screw; never the nut� Because it is fragile, and can break if you turn it, the Spanner is not guaranteed against breakage�SPECS: 11/2" (3.8cm) long. .154" (3.9mm) diameter.#080-431-000AT 2 sight nut spanners, 8K10F69 � � � � � � �$ 12.99

S&W

REAR SIGHT REBUILD KITSevery little Part Required for s&W factory Rear sights

Flat blade gives a crisp, target-style sight picture that eliminates the distracting “double-notch” found on factory sights. .160" high blade

(same as factory) features an angled and serrated rear face that re-duces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment. abSPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for instal-lation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.

/WEIGAND COMBAT S&W REVOLVER

COMPETITION REAR SIGHT BLADE KIT

#078-000-012AT .110" notch sight Blade Kit, 8G27F95 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 29.99

#078-000-013AT .125" notch sight Blade Kit, 8G27J95 � � � � � � � � � � � � � � � � � � � � � � � � � � � 29.99

Provides A sharp, easy-to-Align sight Picture

Low-mount, no-snag combat/competition fixed sights with Triji-

con self-illuminating tritium lamps provide a fast, easy-to-see sight picture in all light conditions. The exclusive two-dot “Straight Eight” design places one front dot on top of a single rear dot to make sight-ing simple and fast. The no-snag sight body mounts low on the slide but provides a glare-free rear blade with smooth, rounded corners

HEINIE SPECIALITY

“STRAIGHT EIGHT” NIGHT SIGHT SET for GLOCK®

fast, low-light sight Pickup With high-Quality,

trijicon® lamps

#394-322-000AT glock straight 8 sights, 4C109M87 � �$ 121.99 394-000-064AT suppressor-height glock strt 8

ledge sight, 4C142E52 � � � � � � � � � � � � � 154.79

that can’t catch on loose clothing or holsters. Sold as a matching front and rear sight set. suppressor-height ledge - extra tall so sight picture can be visible over sound suppressors, plus a vertical, square-cut front face on the rear sight that provides extra purchase for emergency, one-handed slide racking. abSPECS: Steel, blued, matte finish. Rear Blade - .700" (17mm) x .250" (6.5mm). Notch - .119" (3mm) x .125". Body - .712" (18mm) x .727" (18.4mm), .6 oz. wt. Fits in all Glock factory dovetails.

Item Gives a sharp, glare-free, easy-to-see sight picture without extra weight or bulk.

Strong, compact, one-piece rear and serrated-ramp front sights re-place the factory sights with no modifications required. Ultra-low mounted; has no sharp edges to snag on clothing or holsters. Lock-ing, rear sight is drift adjustable for windage. abSPECS: Steel, black, matte finish. Rear - Serrated blade, .700" (17mm) wide, .250" (6.5mm) high, .119" (3mm) wide notch. Front - Semi-ramp .125" wide, .250" (6.3mm) high. Fits all Glock pistols. Combo includes rear sight and .216" high front sight. Use .250" high front sight for correcting point of aim on Glock Models 22, 23, 30 & 35; also works with Novak Black Glock Sights.

HEINIE SPECIALTY SIGHT for GLOCK®

low-Profile gives fast, enhanced sight Picture for Combat Pistols

#394-100-322AT glock Rear sight, 4C39L18 � � � � � � � � � $ 43.99#394-100-323AT glock .250" front sight, 4C31A42 � � � 34.99#394-100-320AT glock front/Rear Combo,

4C58M60 � � � � � � � � � � � � � � � � � � � � � � � � � 64.99

Wedge-shaped body with rounded edges provides a smooth, snag-free draw for con-cealed carry and competition guns. Sits low in the slide for minimum profile. Fine-line serrations on front and rear sight blades eliminate glare for best possible sight picture. Fits factory dovetail cuts; minor fitting may be required. Supplied as a front/rear set. Standard Slant-Pro rear sight has a rear face that slants slightly forward and a gently curved front face. ledge™ models have a vertical, square-cut front face that provides extra purchase for one-handed slide racking. abSPECS: Steel, matte black finish. Rear Sight: .125" wide notch, unless oth-erwise indicated. Other dimensions vary depending on model. Front sight heights vary to regulate properly with rear sight. Browning HP requires milling of slide. Glock/Glock Ledge fit all models except G36. Ledge rear sight has .156" wide notch. S&W M&P Ledge - Rear sight has .140" wide notch.

HEINIE SPECIALTY SEMI-AUTO

SLANTPRO® SIGHTSlow Profile, fixed sights

give A no-snag Draw

stoCK # fits/stYle PRiCe#394-000-011AT Browning HP 4C56L04 $ 61.99#394-102-315AT Glock (all exc. G36) 4C58D60 $ 64.99#394-000-042AT Glock Ledge (all exc. G36) 4C72N99 $ 80.99#394-102-330AT SIG 225, 226, 228, 239 4C52I88 $ 58.99#394-000-039AT S&W M&P Ledge 4C70L36 $ 77.99

Easy-to-install replacements for factory sights speed target acquisition with a distinctive sight picture. Naturally centers the target in the hexagon-shaped rear aperture and focuses the eye on the front sight. Based on medical and psychological research for instinctive use in stressful situations where fine motor skills are often impaired. Helps the shooter combine the best of “sight shooting” and both-eyes-open “point shooting” for close quarters combat and accurate engagement of long-range targets. Made of lightweight, exceptionally strong, impact-resistant molded HexZ-ite-22™ polymer that’s virtually indestructible. Rear sight is bev-eled to resist snagging in holster or on clothing, and front sights have hexagon-pattern stippling on the rear face to prevent glare for maximum contrast with target. Comes with three different-height front sights to fit a wide variety of Glock pistols. Detailed, illustrated installation instructions included. abSPECS: Fiber-reinforced, injection-molded HexZite-22™ polymer, black. Fits Glock 17, 19, 22, 23, 26, 27, 30, 34, 36. Kit includes rear sight body, three front sights, and all mounting hardware. Rear Sight Body - .580" (14.7mm) wide, 1" (2.54cm) long, .483" (12.3mm) high. Front Blades - .570" (14.5mm) long, .140" (3.6mm) wide, in three heights: .150" (3.8mm), .165" (4.2mm), .180" (4.6mm).

GOSHEN ENTERPRISES

HEXSITE® SIGHTING SYSTEM for GLOCK®

instinctively Centers target & Draws eye to

front sight

#100-004-967AT hexsite system for glock, 1C124A84 � � � � � � � � � � � � � � � � � � � � � � � � �$ 129.99


SLANTPRO® 3-D NIGHT SIGHTS

Self-illuminating, Trijicon® inserts give your pistol a fast, easy-to-acquire sight picture in all light conditions. Dual inserts on rear sight are smaller than front sight dot to eliminate confusion and help the shooter get the sights aligned on the target fast. Fine-line serrations eliminate glare for the best possible sight picture in daylight. Wedge-shaped rear sight body has fully rounded edges and fits low in the slide for minimum profile. Offers an exceptionally smooth, snag-free draw for concealed carry and competition guns. Supplied as a front/rear sight set. Minor fitting required; dovetails are cut .002"-.003" oversized for secure fit in factory sight cuts. abSPECS: Steel, matte black finish. .125" wide rear notch. Heights measured from the top of the slide. Glock – Rear Sight: .250" high. Front Sight: .215" high. Fits all Glock models. Taurus 24/7 – Rear Sight: .230" high. Front Sight: .200" high.

no-snag, low-Profile With easy-to-see tritium Dots

#394-000-032AT semi-Auto slantpro 3-D night sights, 4C118B07 � � � � � � � � � � � � � � � � � $ 132.99

#394-000-044AT slantPro 3-D night sights, Taurus 24/7, 4C131Q24 � � � � � � � � � � � � � � � � � � � 147.99

Fully-contoured, cross-dovetail sights complete with the increased, low light visibility of genuine Trijicon, tritium vials. Tapered dove-tail holds the sight firmly. Fits nominal 60° x .300" x .060" front sight dovetails. abSPECS: Steel, blued, matte finish, green dot. Blade; .126" (3.2mm) wide, . 175 (4.4mm), .185" (4.6mm), .190" (4.8mm) or .200" (5mm) high. Installa-tion requires machining of slide.#394-000-001AT .175" tritium sight, 4C49F09 � � � � � � � � $ 54.99#394-311-185AT .185" tritium sight, 4C49E83 � � � � � � � � 54.99#394-311-190AT .190" tritium sight, 4C49G83 � � � � � � � 54.99#394-311-200AT .200" tritium sight, 4C49L83 � � � � � � � 54.99


TRIJICON® FRONT DOVETAIL SIGHTserrated Ramps & tritium Dots for fast Pickup

This solid steel rear sight has a specially contoured front that can be hooked on the user’s belt or pushed against a barrier or

any solid object to allow one-hand slide racking in an emergency. The blade extends over the rear of the slide to extend the effective sighting radius and has 40 lpi serrations to eliminate glare. abSPECS: 4140 steel, black phosphate finish. Fits factory dovetails. 6.5 - .256"/6.5mm high. Fits Glock 17/19/22/23/24/26/27/33/34/35/37/38/39. 6.9 - .270"/6.90mm high. Fits Glock 20/21/29/30/31/32/36.

HENNING BATTLEHOOK REAR SIGHT for GLOCK®

hooked front Allows one-handed slide Racking

#100-011-638AT 6.5 Battlehook sight, 7C57I65 � � � � � � � $ 62.99#100-011-639AT 6.9 Battlehook sight, 7C57I65 � � � � � � � 62.99


brownells.com

hA

nD

gu

n sig

ht

s

Serrated-ramp fronts provide a perfect match for low mount, rear sights. Avail-able with a plain Black Ramp or high-visibility White Dot. Installation requires machining of slide. .185" or .190" match Heinie 1911 and Bo-Mar BMCS rears. .200" front matches Heinie Browning HP Rear. abSPECS: Steel, blue, matte finish. Blade - .126" (3.1mm) wide, .175" (4.4mm), .185" (4.6mm,) .190" (4.8mm), .200" (5mm) high, .500" (12.7mm) long. Dovetail - .60° x 300" x .060" with .002" taper.


RAMPED DOVETAIL FRONT SIGHTA Bold, easy-to-see sight

Picture in A Compact, easy-to-Carry shape

stoCK # height stYle PRiCe#394-000-002AT .175" Black Ramp 4C23N30 $ 25.99#394-309-185AT .185" Black Ramp 4C23I30 $ 25.99#394-309-190AT .190" Black Ramp 4C23K30 $ 25.99#394-309-200AT .200" Black Ramp 4C23P30 $ 25.99#394-312-200AT .200" White Dot 4C25M39 $ 27.99

Low-profile, fixed rear sight has an extra-wide notch that aids in fast acquisition and alignment with the front blade. Excellent for a self-defense or carry gun, as well as for competition or to give a shooter with aging eyes an extra edge. Sits low in the slide for minimal profile, and wedge-shaped body has rounded edges to aid in a smooth, snag-free draw. Self-illuminating, green Tritium inserts provide a fast, easy-to-acquire sight picture in dim light. Easy-to-aquire Straight Eight (S8) configuration has you align the front sight dot vertically with the single dot under the rear sight notch in a simple, distinctive, elongated figure eight pattern. Fine-line serra-tions on the rear of the blades helps eliminate glare in bright light. Rear sight has a rear face that slants slightly forward. Ledge™-style vertical, square-cut front face enables easy one-handed slide rack-ing. Fits factory sight dovetails. abSPECS: Steel, matte black finish. Rear Sight Notch - .156" wide x .120" deep. Front sight heights vary to regulate properly with rear sight. Minor fitting required; dovetails are cut .002"-.003" oversized for secure fit in factory sight cuts.

HEINIE SPECIALTY S&W M&P

SLANTPRO® QWIK™ SIGHT SET“no-snag” sight set

enables Quick target Acquisition under

stress

#394-000-062AT M&P Qwik s8/ledge night sight set, 4C140G26 � � � � � � � � � � � � � � � � � � � � � � � � $ 154.99

Fixed combat sights with Trijicon® self-illuminating Tritium inserts provide a fast, easy-to-acquire sight picture in all light conditions. The Tritium dot on the front sight aligns vertically with the single dot on the rear sight in a distinctive elongated figure eight pattern. Wedge-shaped body has fully rounded edges and sets low in the slide for minimum profile. Offers an exceptionally smooth, snag-free draw for concealed carry and competition guns. Fine-line serrations on front and rear blade eliminate glare for the best pos-sible sight picture. Fits factory dovetail cuts; minor fitting may be required. Supplied as a front/rear sight set. Standard SlantPro rear sight has a rear face that slants slightly forward and a gently curved front face. ledge™ rear sight has a vertical, square-cut front face that provides extra purchase for one-handed slide racking. straight eight - Tritium dot on the front sight aligns vertically with the single Tritium dot on the rear sight in a distinctive, elongated “figure eight pattern.” Sight sets are Straight Eight configuration unless indicated otherwise in the table. 3D – Tritium dot on the front sight aligns horizontally with two dots on each side of the rear sight notch for an easy-to-see three dot sight picture. Supplied as a front/rear sight set. abSPECS: Steel, matte blue finish. Tritium inserts - Green. Rear Sight: .125" (3.1mm) x .112" (2.8mm) notch. Other dimensions vary depending on model. Front sight heights vary to regulate properly with rear sight. Browning HP requires milling of slide. Glock/Glock Ledge – Rear Sight: .250" high, .156" wide notch. Front Sight: .210" high. Fits all models except G36. S&W M&P Ledge – Rear Sight: .255" high, .140" wide notch. Front Sight: .180" high.


SLANTPRO® NIGHT SIGHTSlow Mount With tritium Dots

stoCK # fits/stYle PRiCe#394-000-014AT Browning HP 4C125C94 $ 138.99#394-102-318AT Glock 4C113M67 $ 125.99#394-000-041AT Glock Ledge 4C126B08 $ 140.99#394-000-015AT Glock 36 4C113K67 $ 125.99#394-000-023AT HK USP Compact 4C125A94 $ 138.99#394-102-335AT SIG 225, 226, 228, 239 4C106K34 $ 118.99#394-000-010AT SIG 220, 229 4C106N34 $ 118.99#394-000-040AT S&W M&P Ledge 4C140A26 $ 154.99#394-000-022AT Springfield XD 4C107K95 $ 118.99

Direct replacements for factory sights use light-gathering Lit-ePipe fiber optic rods that help you acquire the sights and get on target fast. The bright, eye-catching dots really stand out and give you a sight picture that’s fast-to-pick-up in poorly lit surroundings, bright daylight, or anything in between. Machined steel sight bodies protect the LitePipes from impact and blend neatly into the slide. Comes with a set of interchangeable red and green LitePipes that let you change the dot color and size to suit your specific shooting conditions. abSPECS: Steel, black matte finish, with an assortment of interchangeable red and green fiber optic inserts. All models fit factory dovetails. S&W M&P 9L fits Smith & Wesson M&P chambered in 9mm with 5" barrel. .247" (6.3mm) high, .4" (10.2mm) wide. Includes an opaque, non-fiber-optic white rod.

improves sight Visibility for fast target Acquisition

#638-000-189AT s&W M&P 9l front sight, 8C30A37 � � $ 34.99#638-000-195AT Walther P22/P22Q front sight,

8C29D61 � � � � � � � � � � � � � � � � � � � � � � � � � � 32.99

HIVIZ FIBER OPTIC HANDGUN FRONT SIGHTS

Genuine, Trijicon, green Tritium lamps feature polished quartz lenses for improved sight recognition in low light,

plus appear as white dots for enhanced sight acquisition in bright sunlight as well. Sight bodies are EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra tight tolerances. Features precise click-adjustments for con-sistent changes in windage and elevation. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up.SPECS: 4140 steel, blue, matte finish. .076" (1.9mm) diameter Tritium lamps. BM #1 retrofits pistols modified to accept the Bo-Mar BMCS rear sight. LPA fits Springfield Armory, Para-Ordnance, and Charles Daly 1911 Autos using the LPA TRT dovetail. Kimber Adjustable fits Kimber models with adjustable factory rear sight. Elliason fits Colt Anaconda, Diamond-back, Gold Cup, Officer’s Model Match, Python, Trooper, Ace, and others originally fitted with either Accro or Elliason sights.

KENSIGHT ADJUSTABLE NIGHT SIGHTglowing tritium lamps Maximize

sight Visibility in low light

#100-002-627AT BM #1, 5A101P18 � � � � � � � � � � � � � � � � � $ 104.99#100-002-628AT lPA, 5A98K20 � � � � � � � � � � � � � � � � � � � � 104.99#100-002-629AT Kimber Adjustable, 5A99H43 � � � � � � 104.99#100-003-407AT elliason Adjustable, 5A99E43 � � � � � � 104.99

Replacement front sights work in conjunction with factory rear sights to give you fast sight acquisition in most light conditions. Machined steel body uses overmolded technology to completely cover and protect the light gathering, polymer LightPipe with an extra layer of clear polymer. Gunsmith fitting recommended. ab

sPRingfielD XD - Precision machined to fit the factory dovetail; will not shift, even under the heaviest recoil. Overmolded with clear resin to protect the light-gathering rod, prevents snagging on clothes or holster. Standard .090" front sight diameter allows accurate shooting under the most demand-ing conditions. Fits Springfield XD models. Available in red or green.SPECS: Steel, black, matte finish. .790" (20mm) long.#638-000-080AT front sight, Red, 8C28H36 � � � � � � � � � $ 34.99#638-000-079AT front sight, Green, 8C30A54 � � � � � � � � 36.99

s&W 317/66/67/625/629/657/686/696 - Fits S&W revolvers that accept pinned front sights: models 317, 66, 67, 625, 629, 657, 686 and 696 (except 686SSR, Classic Series and Performance Center guns). Red light rod.SPECS: Steel, black, matte finish. .893" (22.6mm) long.#638-000-059AS front sight, Red, 8C33I71 � � � � � � � � � � � � $ 37.99

s&W J fRAMe - Fits J frame revolvers with 3" or shorter barrel and pinned front sight blade. Sight is not predrilled; gunsmith fit-ting recommended. Available with red or green light rod.SPECS: Steel, black, matte finish. .712" (18.1mm) long x .150" (3.8mm) high from top of barrel.#638-000-084AS s&W J-frame front sight, Green,

8C33L71 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 37.99#638-000-083AS s&W J-frame front sight, Red,

8C31K30 � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.99

s&W K, l & n fRAMe - Fits K, L & N frame models with pinned front sight blade (ex-cept 686SSR). Gunsmith fitting recom-mended. Available with green or orange light rod.SPECS: Steel, black, matte finish. .893" (22.7mm) long.#638-000-002AS s&W K/l/n frame front sight, Green,

8C32Q47 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99#638-000-023AS s&W K/l/n frame front sight,

Orange, 8C31F30 � � � � � � � � � � � � � � � � � � 34.99

s&W ClAssiC, PeRfoRMAnCe CenteR & DX MoDels - Inter-changeable for different shooting distances and scenarios. Easy-to-see, bright red or green light rod makes target acquisition fast and efficient. Specially machined base is precision cut to fit factory ramp or base. Fits S&W Classic, Performance Center, and DX models.SPECS: Steel, black, matte finish. .813" (20.6mm) long. Available in .208", .250", and .310" heights.#638-000-053AS .208" front sight, Green, 8C31G30 � � $ 34.99#638-000-051AS .250" front sight, Green, 8C31C30 � � 34.99#638-000-052AS .250" front sight, Red, 8C31I30 � � � � � 34.99#638-000-055AS .310" front sight, Green, 8C31F30 � � � 34.99

RugeR® lCR™ - Drop-in replacement for factory front sight has contoured base to match the barrel radius for a snug fit and streamlined appearance. Secures to factory sight mounting stub with included steel cross-pin.SPECS: Steel, black, matte finish. Red or green light rod. .850" (21.6mm) long.#638-000-192AS lCR front sight, Red, 8C34L58 � � � � � � $ 39.99#638-000-193AS lCR front sight, Green, 8C34I58 � � � � 39.99

sig P220/P225/P226/P228/P229/P239 - CNC machined base installs firmly in the factory dovetail. Smooth edges won’t catch on clothing or holster. Fits P220, P225, P226, P228, P229 and P239. SPECS: Steel, black, matte finish. .793" (20.1mm) long.#638-000-057AS front sight, Red, 8C31E46 � � � � � � � � � � � $ 37.99

HIVIZ OVERMOLDED HANDGUN FRONT SIGHTS

improved Visibility in All light Conditions

Provides consis-tent accuracy through better production methods. Electro-discharge machined from 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to help retain these tolerances for many years to come. One-piece blade is cut from solid steel barstock, so it won’t fly apart when your shot matters most. Consistent, click-adjustable detents for windage and elevation give precise repeatability. All models feature a full-serrated blade for better target recognition and a rebated square notch for improved, “shadowless” front sight definition. BM #1 Deep notch features a .020" deeper sight notch and finer surface serra-tions than standard model for easier front sight acquisition. White Dot model has rounded corners like the old Bo-Mar combat style adjustable sight, and features a white, .070" (1.8mm) diameter dot on each side of the notch.SPECS: 4140 steel, blue, matte finish. Blade - .750" (19mm) wide, .433" (1mm) thick. Notch - .100" (2.5mm) deep (except BM #1 Deep Notch), .134" (3.3mm) wide.

KENSIGHT

CLASSIC TARGET SIGHTWire eDM Produced

for Precision fit & function

Standard

stoCK # fits DoVetAil PRiCe#100-002-632AT BM #1 Standard 5A58C48 $ 64.99#100-002-633AT BM #1 Deep Notch 5A60H02 $ 64.99#100-003-069AT BM #1 White Dot 5A60K02 $ 64.99#100-002-634AT Kimber 1911 Adj. 5A58E48 $ 64.99#100-002-635AT Elliason 5A46J17 $ 49.99#100-002-636AT Ruger® Mark II/MarkIII 5A60F02 $ 64.99

White Dot

Solid steel body with a bright, fiber optic rod gives your eye a quick-to-focus aiming point for fast target acquisition.

Brilliant orange or green rod is 9/16" long for excellent light gather-ing. Drop-in replacement for factory sight. abSPECS: Steel, blue, matte finish. .150" (3.8mm) blade width. Height/fits - .332" fits Super Redhawk .44 Mag. and GP-100® .357 Mag. .390" fits Redhawk® .44 Mag., Super Redhawk .480 and Blackhawk® Hunter.

MARBLE RUGER® REVOLVER

FIBER OPTIC FRONT SIGHTBright fiber optic is fast on target for

hunting & Action shooting

stK# oRAnge stK# gRn height PRiCe#579-000-029AT #579-000-032AT .332" 9G17A20 $ 19.99#579-000-030AT #579-000-033AT .390" 9G17H19 $ 19.99


SINCE 1939

hA

nD

gu

n s

igh

ts

Enjoy the accuracy of a fully adjust-able, competition-style rear sight in a package suitable for daily carry. Beveled edges on sight body and ra-diused corners on blade minimize chances of snagging on clothing or holster. Blade, sight body, and base are EDM-wire machined from high-grade, 4140 billet steel, then heat-treated to Rc 28-32 to retain the extra-tight tolerances. Front hinge pin is hardened to Rc 60 for reliable, long-lasting service without breakage. Fine serrations on the rear sight blade surface reduce light reflection to enhance sight pick up in all light conditions. Consistent, click adjustable detents for windage and elevation provide precise, repeatable settings.SPECS: 4140 steel, blued, matte finish. BM #1 - Fits pistols with the Bo-Mar BMCS rear sight dovetail. BM #1 Oversized – Dovetail is .010" over-sized to allow custom-fitting in loose Bo-Mar BMCS slide cuts. LPA Cut 1911 - Fits Springfield Armory, Para-Ordnance, Nowlin, High Standard, Olympic Arms, and Charles Daly 1911 Auto pistols with the LPA slide cut for adjustable sights.

KENSIGHT COMBAT CARRY ADJUSTABLE REAR SIGHT

Rounded Blade edges Won’t snag on Clothing or holsters

#100-002-637AT BM #1 Rear sight, 5A61H50 � � � � � � � � � $ 67.99#100-004-082AT BM #1 oversized Rear sight,

5A62J70 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69.99#100-002-638AT lPA Cut 1911 Rear sight, 5A60H56 � � 64.99

Smooth, low-profile rear sight has an angled top surface with mitered edges that won’t snag on holsters or clothes. Rebated blade fights glare. Helps aging eyes see front sight more easily. Available in Plain Black (PB) or tritium night sight with two self-illuminating Tritium dots for easy sight acquisition in low light conditions. abSPECS: Machined steel, matte black finish. Fits later models with external, side extractor only. Use with .175"-.215" high front sight. Requires milling of slide; use 65° x.495" dovetail cutter. PB has .125" (3.2mm) wide notch; Tritium has .123" (3.9mm) wide notch.

no-snag “Angle” Design; fast sight Picture

#662-260-009AT PB lo-Mount sight, 2F32L21 � � � � � � � � $ 34.99#662-002-007AT tritium lo-Mount sight, 2F84P57 � � � 89.99

NOVAK BROWNING HI-POWER

LO-MOUNT REAR SIGHT

Click-adjustable rear sight works with your pistol’s existing front sight to give you a precise sight picture for competition and target shooting. Two

white dots (WD) on either side of the notch help you get the front sight blade neatly centered quickly. Some models also available with a solid white outline (Wo) around the notch or plain black (PB) with no white markings. Machined from solid steel with a tapered dovetail that locks securely into the pistol’s existing rear sight slot for a drop-in installation - no machining or milling required. Hardened windage and elevation click adjustment screws mean that your setting stays locked in. Browning hi Power also available in a fiber optic (f/o) set with two green dots on rear sight, red dot on front sight. SPECS: Machined steel, matte black oxide finish. Includes Allen wrench and adjustment screwdriver.

L.P.A. SIGHTS

ADJUSTABLE REAR SIGHTenhances Accuracy for target &

Practical shooting

stoCK # fits stYle PRiCe#100-016-360AT Beretta 92/96/98/M9/

Brigadier/90-TwoWD 4D89F95 $ 89.95

#100-016-362AT Browning HP Sport WD 4D89C95 $ 89.95#100-016-361AT Browning HP Vigilante WD 4D89J95 $ 89.95#100-017-340AT Browning Hi Power F/O Set 4D159K99 $ 159.99#100-016-358AT Colt 1911A1 Gov’t Model WD 4D89N95 $ 89.95#100-017-337AT Colt 1911A1 Gov’t Model WO 4D89D99 $ 89.99#100-017-336AT Colt 1911A1 Gov’t Model PB 4D89N99 $ 89.99#100-016-359AT Colt 1911 70/80/90 Series WD 4D89G95 $ 89.95#100-017-339AT Colt 1911 70/80/90 Series WO 4D89A99 $ 89.99#100-017-338AT Colt 1911 70/80/90 Series PB 4D89J99 $ 89.99#100-016-365AT CZ 75 (Brno Old Model) WD 4D89G95 $ 89.95#100-016-366AT CZ 75 & 85 (New Model) WD 4D89N95 $ 89.95#100-016-364AT Glock 17-35 Series WD 4D89M95 $ 89.95#100-017-335AT Glock 17-35 Series WO 4D89N99 $ 89.99#100-017-334AT Glock 17-35 Series PB 4D89Q99 $ 89.99#100-016-368AT Ruger Mark II WD 4D89A95 $ 89.95#100-016-363AT Sig Sauer P Series WD 4D89L95 $ 89.95#100-016-370AT S&W Revolver WD 4D119N95 $ 119.95#100-016-367AT Taurus PT-92/-58/-100 WD 4D89C95 $ 89.95

Low profile, sights feature micrometric windage/elevation ad-justments with hardened click screws and a tapered dovetail for a strong lock into the existing groove. Drop-in front and rear replace-ments fit factory dovetails; minor gunsmithing or fitting maybe re-quired, especially for front sight. Offers the classic, instinctive three-dot sight picture, with a choice of white dots (WD) or fiber optic dots (fo). Unless otherwise noted below, FO sights come with 1 red and 1 green set of interchangeable inserts so you can choose the color or color combination that's best for your eyes. novak 1911 sets have standard Novak .495" x 65° rear dovetail and .330" x 65° front dovetail. Novak also available with a plain black rear sight and a red front sight (PB/R). Carry sights provide full windage/elevation ad-justability and are designed specifically for concealed-carry pistols, with neatly beveled edges that won't snag on clothing or holster. SPECS: Machined steel, matte black oxide finish.

L.P.A. SIGHTS 1911 AUTO

ADJUSTABLE SIGHT SETS

streamlined & Compact Plus full Adjustability

stoCK # fits tYPe PRiCe#100-016-349AT Beretta Brigadier WD 4D109N95 $ 109.95#100-016-354AT Beretta 92/96 WD 4D109C95 $ 109.95#100-016-355AT Browning GP WD 4D109Q95 $ 109.95#100-016-352AT Browning Vigilante WD 4D109I95 $ 109.95#100-016-350AT Colt 1911A1 70 Series WD 4D109I95 $ 109.95#100-016-341AT Colt 1911A1 70 Series FO 4D159M95 $ 159.95#100-016-351AT Colt 1911A1 80 Series WD 4D109I95 $ 109.95#100-016-342AT Colt 1911A1 80 Series FO 4D159J95 $ 159.95 100-019-886AT Bo-Mar-Style Rear Only PB 4D72Q43 $ 79.95#100-018-336AT Novak 1911 Govt Model WD 4D106Q63 $ 119.99#100-018-338AT Novak 1911 Govt Model FO 4D126K73 $ 139.95#100-018-337AT Novak 1911 Govt Model PB/R 4D106M63 $ 119.95#100-016-346AT CZ 75B//85B (Current Production) WD 4D109C95 $ 109.95#100-016-353AT CZ 75 Old Models ("Pre-B" Brno) WD 4D109C95 $ 109.95#100-016-356AT Glock 17/19/20/21/22/23/25/26/27/

28/29/30/31/32WD 4D109P95 $ 109.95

#100-016-345AT Glock 17/19/20/21/23/25/26/27/29/30/31/32

FO 4D159B95 $ 159.95

#100-016-347AT Sig P220 WD 4D109Q95 $ 109.95#100-016-343AT Sig 220 FO 4D159P95 $ 159.95#100-016-348AT Sig P229 WD 4D109F95 $ 109.95#100-016-344AT Sig 229 FO 4D159G95 $ 159.95#100-017-341AT Smith & Wesson M&P WD 4D134K99 $ 134.99#100-017-342AT Smith & Wesson M&P WD rear/

FO front4D117C99 $ 117.99

Model

Low-profile, fixed sights for Taurus 24/7 OSS pistols have glow-ing fiber optic or Tritium inserts that help you see the sights and get on target fast, even in low-light or high-stress situations. Same height as original factory sights, and cut for drop-in fit to factory dovetails. Streamlined design combines the compact profile of No-vak’s Lo-Mount rear sights with a recessed rear face and wide notch that guide your eye quickly to the front sight. Precision-machined steel construction, with non-glare matte black finish, handles the rigors of tactical operations and daily carry. Sloping top surface, rounded corners, and beveled edges won’t snag on clothing or holster. Horizontal ridge on the front of the rear sight aids in one-handed slide racking and gives your pistol a uniquely aggressive look. Rear sights have a dot on each side of the notch; front sights have one dot. Light-gathering properties of fiber optic (F/O) rods make maximum use of ambient light and provide a bright glow that stands out against dark backgrounds. abSPECS: Machined steel, matte black finish, with fiber optic inserts. Fits factory dovetails on Taurus 24/7 OSS pistols with 51/4" barrel; minor fit-ting may be needed. Front - .595" (1.5cm) long, .125" (3.2mm) wide, .20" (5.1mm) high. Rear - .95" (2.4cm) long, .615" (1.6cm) wide, with .135" (3.4mm) wide notch.

NOVAK TAURUS 24/7 OSS

X-MODEL SIGHTSRugged, low-Profile

Combat sights Maximize Available light for fast

targeting in All light Conditions

#662-000-087AT taurus 24/7 f/o Rear sight, Green, 2F52K38 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 58.99

#662-000-088AT taurus 24/7 f/o front sight, Red, 2F38A54� � � � � � � � � � � � � � � � � � � � � � � � � � � 41.99

Really “shines” when other sights are useless. No switch to turn on, no batter-ies to wear out. Both front and rear blades have their own green Tritium gas light source and provide a green/green (grn/

grn), 3-dot sight picture. Some models also available in green/yel-low (grn/yel) and green/orange (grn/orng). The front sight is always green for contrast with the rear sight. Unaffected by weather, gun solvents or oils. Used by NATO, U.S., and Israeli armies. Also ideal for law enforcement and others requiring accuracy in low-light condi-tions. Contains both front and rear sights. Rear sights either replace the original rear entirely or, as on S&W revolvers, a new rear leaf, screw and nut are provided. Front sights either replace the original (1911 Auto); slip over and are pinned to the original blade (most other autos); or replace the factory colored insert (S&W Autos). Factory warranty on TRU-DOT sights to the original purchaser for 12 years.SPECS: Blued steel with Tritium inserts. Sights marked Adj. fit guns origi-nally equipped with factory, adjustable sights. Sights marked Fxd. fit guns originally equipped with factory, fixed/non- adjustable sights. S&W mod-els will NOT fit guns originally equipped with plastic sights.

MePRolight fRont sights - Single, front sights only. Re- place damaged units or stake-on models after refinishing.SPECS: Steel body, blue. Self-luminous lamp. Sights marked Adj. are for use with Meprolight Adjustable rear sights; all others are used with Mep-rolight Fixed sights.

stoCK # fits PRiCe#387-500-112AT 1911 Auto., Adj. (Narrow Tenon) 2B39C95 $ 43.15#387-102-240AT Glock 17, 19, 20, 21, 22, 23, 26, 27

29, 30, 31, 32, 33 (.170" high)2B32P61 $ 35.15

#387-000-096AT Glock 42/43 2B86I80 $ 95.99#387-000-010AT Ruger SP101® .38/357 2B50J11 $ 54.65#387-000-011AT S&W J-Frame 17/8" barrel 2B50B11 $ 54.65

MEPROLIGHT

TRU-DOT® NIGHT SIGHTSfoR PoPulAR hAnDguns Always

“on”; no Batteries, no Charging

stoCK # fits PRiCe#387-302-762AT Beretta 92F (Fxd. Lo-Profile) 2B91I95 $ 101.35#387-000-066AT Beretta PX4 Storm F/G Models (Fxd.) 2B91N83 $ 101.35#387-303-785AT Browning HP (Fxd. Dovetail Frt/Rear) 2B91F83 $ 101.35#387-307-724AT Glock 9mm & .40 cal. (Fxd. grn/grn) 2B75A34 $ 81.90#387-102-220AT Glock 10mm & .45 cal. (Fxd. grn/grn) 2B78C52 $ 83.35#387-000-058AT Glock 10mm & .45 cal. (Fxd. grn/yel) 2B79E29 $ 87.50#387-307-726AT Glock 26, 27 (Fxd. grn/grn) 2B77E36 $ 87.50#387-000-002AT Glock 9mm/.40 (Fxd. grn/orng) 2B77D36 $ 87.50#387-000-004AT Glock 26, 27 (Fxd. grn/orng) 2B77M36 $ 87.50#387-000-005AT Glock 9mm & .40 cal. (Fxd. grn/yel) 2B79C29 $ 87.50#387-000-006AT Glock 10mm & .45 cal. (Fxd. grn/yel) 2B79N29 $ 87.50#387-000-007AT Glock 26, 27 (Fxd. grn/yel) 2B79D29 $ 87.50#387-000-012AT Glock 17, 19, 20, 21, 22, 23 (Adj.) 2B151I98 $ 162.60#387-000-089AT Glock 42/43 (Fxd grn/grn) 2B86E80 $ 95.99#387-000-097AT Glock 42/43 REAR ONLY (Fxd grn) 2B54G65 $ 59.99#387-308-715AT H&K P7, P-13 Series (Fxd.) 2B91E95 $ 101.35#387-215-160AT H&K USP (Adj., full size tactical) 2B151Q98 $ 162.60#387-000-014AT H&K USP (Fxd., full size grn/orng) 2B91H83 $ 101.35#387-115-160AT H&K USP, (Fxd., full size) 2B91I95 $ 101.35#387-000-017AT H&K USP (Fxd., compact grn/yel) 2B91E83 $ 101.35#387-115-170AT H&K USP, (Fxd., compact) 2B91H83 $ 101.35#387-000-043AT H&K 2000, (Fxd.) 2B91D83 $ 101.35#387-000-044AT Kahr K-9, K-40 & K-45 (Fxs.) Post 11/04 2B93E97 $ 102.45#387-000-008AT Kimber Full size (Fxd.) 7H107M20 $ 119.99#387-000-009AT Kimber Cust. Target (Adj.) 7H174K10 $ 179.99#387-000-063AT Kimber Warrior/Raptor (Fxd. grn/grn) 7H119M72 $ 129.99#387-311-790AT Ruger® P-85/89® (Fxd.) 2B91G83 $ 101.35#387-791-901AT Ruger P90™/91™/93™/95™ (Fxd.) 2B91J95 $ 101.35#387-109-940AT Ruger P-94™ (Fxd.) 2B91M83 $ 101.35#387-000-018AT Ruger Super Redhawk® GP100® (Adj.) 2B134D69 $ 146.85#387-000-019AT Sig P220, 225, 226, 228 (Fxd. grn/orng) 2B91F83 $ 101.35#387-000-020AT Sig P220, 225, 226, 228, 229 9mm/357

SIG (Fxd. grn/yel)2B93D97 $ 101.35

#387-000-021AT Sig P220, 226 (Adj.) 2B153J49 $ 164.60#387-000-022AT Sig P229, 239 (Fxd. grn/orng) 2B91E83 $ 101.35#387-000-023AT Sig P229 .40 Cal., 239 (Fxd. grn/yel) 2B91D83 $ 101.35#387-101-290AT Sig P229 (Fxd.) 2B36A56 $ 39.75#387-312-710AT Sig P-220, 225, 226, 228, 239

(Dovetail)2B91H83 $ 101.35

#387-000-070AT S&W M&P 9mm/.40 (Fxd. grn/grn) 2B91B83 $ 101.35#387-000-069AT S&W 1911 Full Size (Fxd. grn/grn) 2B91G83 $ 101.35

stoCK # fits PRiCe#387-000-042AT S&W K, L & N Frame except Mtn. Guns

(Adj. factory rear & pin-on front)2B91K83 $ 101.35

#387-313-200AT S&W K, L & N Frame (Adj.) Use Loctite #609

2B89E72 $ 101.35

#387-313-173AT S&W 3900/5900/6900 (Fxd Novak rear)

2B91K83 $ 101.35

#387-174-420AT S&W Sigma (Fxd) 2B91G95 $ 101.35#387-000-024AT Springfield XD 9mm/.40 cal., 4"/5"

bbl (Fxd. grn/grn)2B86K80 $ 95.99

#387-000-048AT Springfield XD 9mm/.40 cal., 4"/5" bbl (Fxd. grn/yel)

2B86P80 $ 95.99

#387-000-049AT Springfield XD 9mm/.40 cal., 4"/5" bbl (Fxd. grn/orng)

2B86J80 $ 95.99

#387-000-050AT Springfield XD .45 cal. (Fxd.grn/yel) 2B86B80 $ 95.99#387-000-051AT Springfield XD .45 cal. (Fxd. grn/orng) 2B86B42 $ 95.99#387-188-000AT Walther P99, (Fxd.) 2B91N83 $ 101.35#387-000-087AT Springfield XD(M) 4"/5" (Fxd. grn/grn) 2B86A80 $ 95.99


brownells.com

hA

nD

gu

n sig

ht

s

Long enough and high enough for most cus-tom pistol applications. Dovetail installation is much stronger than staking, so the front sight stays put under heavy recoil or extreme use. Drilled for 1/16" diameter roll pin for more “hold”. Blues easily. abSPECS: Steel, blued. Blade - .268" (6.8mm) high, .128" (3.2mm) wide, .640" (16mm) long. Dovetail - 65° x .330" x .075".

MGW SEMI-AUTO

DOVETAIL FRONT SIGHT BLANKstrong & Ready-to-shape for

Custom Applications

#584-012-268AT Dovetail front sight, 4H10C83 � � � � � � �$ 13.08

Exclusive, wedge-shaped, “Concealed Carry” design puts the sight body and blade close to the slide for a snag-free draw and smooth, comfort-able carry. Highly visible rear blade with rebated notch gives fast, glare-free sight pickup for more accurate instinc-tive shooting. Available in Plain Black (PB), with two White Dots (2 Dot), or tritium night sight ith two self-illuminating Tritium dots for easy sight acquisition in low light conditions. abSPECS: Machined steel, blued, matte finish. Glock® - .125" (3.1mm) wide notch. Rear Blade - .713" (18mm) wide x .195" (4.9mm) high. Fits factory dovetail in all models of Glock pistols. Requires Novak Glock Front Sights, listed elsewhere. Beretta .150" (3.8mm) wide notch. Rear Blade - .535" (13.6mm) wide x .320" (8.1mm) high. Fits factory dovetails on Beretta 92, Brigadier, and Elite II ; may require minor fitting. Uses existing front sights.

NOVAK SEMI-AUTO

CARRY REAR SIGHTlow Profile; fits factory Dovetails;

great sight Picture Plain Black

#662-017-001AT PB glock sight, 2F32H11 � � � � � � � � � � � � $ 34.99#662-017-003AT WD glock sight, 2F36L70 � � � � � � � � � � � 39.99#662-001-011AT trit. glock sight, 2F84A57 � � � � � � � � � � 89.99#662-000-007AT WD Beretta sight, 2F37A64 � � � � � � � � � 41.99

2 Dot

Self-illuminating Tritium inserts glow bright green in dim light to help you see the sights and get on target fast. Rear sight has a dot on each side of the notch, front sight has one dot, for an intuitive, horizontal three-dot sight picture that’s easy to acquire, even under stress. White circles around the inserts retain the daylight visibility advantage or your SR9’s original factory white dot sights. Same height as factory sights, and cut for drop-in installation in fac-tory dovetails. Both sights are drift-adjustable for windage; rear sight elevation is fixed. Recessed rear face and wide notch on rear sight help guide your eye quickly to the front sight. Forward sloping top surface, beveled edges, and rounded corners won’t snag on cloth-ing or holster. Front sight is slightly longer than factory sight but will fit holsters designed to accept the stock pistol. Precision-machined steel construction, with non-glare matte black finish, handles the rigors of daily carry and tactical operations. abSPECS: Machined steel, matte black finish. Fits factory dovetails on Ruger SR9 pistol; rear sight also fits SR9c and SR40. Minor fitting may be needed.

NOVAK RUGER® SR9®

NIGHT SIGHTS

#662-000-100AT sR9 Rear night sight, 2F84C45 � � � � � $ 91.99#662-000-101AT sR9 front night sight, 2F52L83 � � � � � 54.95

tritium inserts for fast targeting in low-light

Low-profile fixed sights for Smith & Wesson M&P pistol use glowing fiber optic rods to help you

get on target fast, even in low-light or high-stress situations. Makes maximum use of available light so sights stand out against dark tar-gets and backgrounds. Same height as original factory sights, and cut for drop-in fit to factory dovetails—no milling of slide required. Precision-machined, all-steel construction, with non-glare matte black finish, handles the rigors of tactical operations and daily carry. Sloping tops, rounded corners, and beveled edges won’t snag on clothing or holster. front sight has one red dot and is .190" high. Rear sight has a green dot on each side of the notch; setscrew allows drift adjustment for windage. Wide, .145" notch aids fast acquisition of front sight. Exceptionally low profile - only .236" above slide at the highest point. Recessed rear face helps draw the eye quickly to the front sight. abSPECS: Machined steel, matte black finish, with fiber optic inserts. Fits factory dovetails on S&W M&P pistols; minor fitting may be needed.

NOVAK S&W M&P

LO-MOUNT FIBER OPTIC SIGHTSfixed Combat sights Maximize

Available light for fast targeting in All light Conditions

#662-000-084AT fiber optic front sight for M&P, 2F38D54 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 41.99

#662-000-081AT fiber optic Rear sight for M&P, 2F45K87 � � � � � � � � � � � � � � � � � � � � � � � � � � � 49.99

ReAR sight DoVetAil inteRChAngeABilitY The term Bo-Mar Cut® is a registered trademark of Bo-Mar Tool

And Manufacturing Co., Inc. We carry rear sights from various other manufacturers that fit in cuts identical to the Bo-Mar cut. To avoid trademark infringement, you will see the following sight cuts, along with the symbol that will represent that specific sight, listed in the SPECS section of rear sights from manufacturers other than Bo-Mar.

sight Cut DoVetAil sYMBolBo-Mar BMCS 60˚ x .359" x .100" BM-#1Bo-Mar BMCS-2 60˚ x .359" x .100" BM-#2

Flat blade with anti-glare serrations gives ideal sight picture for target or carry; contoured, resists snag-ging. Low profile for quick alignment. Machined, solid steel; adjusts for windage and elevation. abSPECS: Steel, matte, black finish. Rear blade - .434" (11mm) high, .762" (19.3mm) wide. Notch - .110" (2.8mm) wide. Installation requires milling, drilling and tapping of slide. Fits BM-#1 cut.

STI SEMI AUTO ADJUSTABLE REAR SIGHT

low Profile, easy Carry, fits Most semi-Auto Pistols

#791-256-000AT sti Adjustable sight, 1G62M75 � � � � � � $ 66.99

Dovetail mounted, roll-pinned sights resist shoot-off. Easily changed for different loads or conditions. Full instructions. abSPECS: Blued steel, .295" (7.5mm) high x .125" (3.17mm) wide blade. Requires milling 65° x .330" dovetail in slide. .075 size for Govt. Mod., Com-mander, S&W 645/745/59. .060 for Colt Officers ACP, S&W mini-guns, Browning Hi-Power, CZ-75.#662-645-075AT .075 novak front sight, 2F16F08 � � � � � $ 17.99#662-645-060AT .060 novak front sight, 2F16K08 � � � � � 17.99

strong, easily Changed sights for Autos

NOVAK SEMI-AUTO

DOVETAIL MOUNT FRONT SIGHT

Rugged, machined steel front and rear sights let you upgrade your M&P with a precise, versatile, windage- and elevation-adjustable sight system that’s easy to install because it fits the factory dovetails. Low-profile design similar to Novak’s famous Lo-Mount sights has rugged, machined steel con-struction to stand up to the rigors of tactical operations and daily carry. Smooth, rounded and beveled edges minimize risk of catch-ing or snagging. Set screw allows drift adjustment for windage; ele-vation screw positively stops and audibly clicks for easy fine-tuning. Rear sights have non-serrated, recessed rear face with .120" wide notch that correctly regulates with front sight. Front sight’s gently sloping rear face and rounded front provide a clear sight picture and resists snagging during the draw. Front and rear sights are sold separately, so you can mix and match styles to suit your shooting application. Available in Plain Black, Fiber Optic Dot, and Tritium Dot models. Dot styles have a dot on each side of the rear notch and one on the rear face of the front sight. Non-glare matte black finish. abSPECS: Steel, matte black finish. Front and rear sights available separately. PB = Plain Black; FO = Fiber Optic; TR = Tritium.#662-000-068AT PB Rear sight, 2F64K26� � � � � � � � � � � � � $ 69.99#662-000-070AT f/o Rear sight, 2F75L28 � � � � � � � � � � � � 81.99#662-000-071AT tR Rear sight, 2F110N17 � � � � � � � � � � � � 119.99#662-000-075AT f/o front sight, 2F38Q54 � � � � � � � � � � 41.99

low-Profile Mounting; fully Adjustable; four styles to Choose from

NOVAK S&W M&P

EXTREME DUTY SIGHTS

High-visibility replacement front sight comes with a bright, light-gathering fiber optic rod or a self-illuminating Tritium insert to provide immediate sight acquisition in a broad range of light conditions. The eye is immediately drawn to the big, .125" diameter dot for fast, instinctive targeting. Choose from green or red fiber optic (f/o) or green tritium night sight configuration. Precision-machined steel body provides maximum protection of the inserts. Installs on factory sight lug. Some fitting required; gunsmith instal-lation recommended. abSPECS: Steel, blued, matte finish. .875" (22.2mm) long, .145" (3.7mm) wide blade, .225" (5.7mm) wide base, .265" (6.7mm) high. Fiber Optic (F/O) - red or green, .125" O.D. Tritium - green .05" O.D. insert, white ring .125" OD. Fitting required; gunsmith installation recommended.

NOVAK RUGER® LCR™

MEGA DOT® FRONT SIGHTShigh-Visibility fiber optic or tritium inserts for All light

Conditions

#662-000-046AT lCR Mega Dot f/o front sight, Green, 2F45I16 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 49.99

#662-000-097AT lCR Mega Dot f/o front sight, Red, 2F44F99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99

#662-000-096AT lCR Mega Dot front sight, Tritium, 2F49N97 � � � � � � � � � � � � � � � � � � � � � � � � � � 52.99

One inch long, fiber optic rod gathers lots of light, creating an

exceptionally bright sight picture even in low light conditions. Base is wire EDM’d with 50 lpi machined serrations on the rear face. Extra height works with higher than factory, aftermarket rear sights. Works best with Millett .360" and .410" rear sights. Pin fits all Smith & Wes-son revolvers with pinned front sight. Classic fits S&W Classic and DX revolvers with interchangeable front sights. abSPECS: Steel base, black, matte finish. 1" (2.5cm) long, .125" (3.17mm) blade width, Pin - .250" (6.35mm) and .300" (7.62mm) high. Classic - .250" high only.

SDM S&W REVOLVER

SUPER SIGHTsuper Bright, fiber optic

offers A Clear sight Picture for hunting & Action shooting

#864-000-005AT .250" Pin Red sight, 4F26H38 � � � � � � � �$ 28.95#864-000-006AT .250" Pin green sight, 4F26N38 � � � � � � 28.95#864-110-001AT .300" Pin Red sight, 4F26B38 � � � � � � � � 28.95#864-110-003AT .300" Pin green sight, 4F26J38 � � � � � � 28.95#864-000-003AT .250" Classic Red sight, 4F31A91 � � � � � 35.95#864-000-004AT .250" Classic green sight, 4F31B91 � � � 35.95

Front sights only, to replace those knocked off or removed for refinishing. abSPECS: Steel body, blued. Self-luminous lamp.

TRIJICON® FRONT SIGHTReplace lost or Removed sights

stoCK # fits PRiCe#892-500-100AT 1911 Auto Govt. narrow 2H60F47 $ 63.99#892-500-101AT 1911 Auto Govt. wide 2H61J99 $ 61.99#892-501-101AT 1911 Auto Commander wide 2H67F99 $ 67.99#892-502-101AT 1911 Auto Officers wide 2H68M99 $ 68.99#892-505-000AT Glock (all models) 2H50E51 $ 54.99#892-506-225AT Sig 225/226/228 2H60E01 $ 63.99#892-506-220AT Sig 220/229 2H66G99 $ 66.99

Easy-to-install, all-steel, replacement sights fit right in the factory dovetail. White Dot model matches the Novak 3 Dot Glock Rear Sight. tri-tium Dot matches the Novak 3 Dot Glock Rear Sight and Glock factory Tritium dot or bar rear sight. abSPECS: Fits all models of Glock semi-auto pistols. Machined steel, blued. .134" wide, .185" (4.7mm) high.

NOVAK FRONT SIGHT for GLOCK®

Drop-in Replacement for All Models of glock Pistols

#662-817-103AT White Dot sight, 2F26H97 � � � � � � � � � � � $ 27.99#662-005-004AT tritium Dot sight, 2F50K58 � � � � � � � � � � 54.99

Snag-free, steel front and rear fiber optic sights enable you to find the target quickly in all types of light conditions. Front sights replace Glock factory sights with a slightly angled front edge to prevent snagging. tac-tical front sight covers both sides of light in-sert for maximum concealability. Rear sights are CNC machined to fit the factory dovetail

and include a setscrew; machined light channels provide optimum light gathering. Comes with .060" diameter light inserts. Edges are rounded to prevent drag on holsters or clothing. abSPECS: Steel, blued, matte finish. Tactical Front - is .63" (1.6cm) long, .12" (.3cm) wide. Rear Sights are .66" (1.6cm) long, .72" (1.8cm) wide, .19" (.48cm) high, with .13" (3.3cm) wide notch.

NOVAK

FIBER OPTIC SIGHTS for GLOCK®

#662-000-047AT tactical front sight, Red, 2F38E54 � � � �$ 41.99#662-000-051AT tactical front sight, Green,

2F38I54 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 41.99#662-000-050AT .060" Rear sight, Red, 2F45M87 � � � � � � 49.99#662-000-054AT .060" Rear sight, Green, 2F45F87 � � � � � 49.99

steel Replacement sights for All light Conditions


SINCE 1939

hA

nD

gu

n s

igh

ts

Designed specifically for Glocks with suppressors, these high-profile, self-illuminating sights also work as a co-witness for the Trijicon RMR sight. Steel sights feature Tritium filled lamps for easy sight acquisition in low light. The glowing, green lamps are mounted inside silicone-sealed aluminum cylinders for protection against breaking or leakage. Solvent resistant, sapphire lenses focus and evenly distribute the light while protecting lamps from punctures. Three sight configurations are available: white rings around front and rear lamps, white rings on front lamp with black rings around rear sights, or black rings around front and rear lamps. Gunsmith installation is recommended. abSPECS: Steel, blued, with green Tritium lamps. Fits Glock models; 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, and 39.

tall sights Permit Aiming over An Attached silencer

#892-000-133AT night sight set w/White Rings, 2H124K00 � � � � � � � � � � � � � � � � � � � � � � � � $ 124.00

#892-000-135AT night sight set w/Black Rings, 2H124M00 � � � � � � � � � � � � � � � � � � � � � � � 124.00

#892-000-134AT night sight set w/White front, Blk Rear Rings, 2H124G00 � � � � � � � � � � � � 124.00

TRIJICON BRIGHT & TOUGH™ NIGHT SIGHT SET for GLOCK®

Distinctive, 14K gold, McGivern-style bead dresses up your Smith & Wesson revolver and provides an easy-to-see dot that won’t dull or corrode. Blade is EDM wire cut from ground, flat stock to ensure clean edges and proper fit, then matte finished for excellent contrast and glare resistance. Available in .250" or .300" blade heights to regulate properly with standard factory loads or today’s high performance, hunting ammo. 1/8" di-ameter, bead is slightly domed and highly polished for excellent light reflection. gC models fit S&W Classic and DX revolvers with inter-changeable front sights. gP models fit S&W revolvers with pinned front sights; requires drilling and pinning for installation. abSPECS: Blade - Steel, matte blued. 21/32" (16.7mm) long, 1/8" (3.2mm) wide, 1/4" (4.4mm) high. Bead - 14K gold. 1/8" diameter.

SDM S&W REVOLVER

GOLD BEAD FRONT SIGHT

#864-000-009AT gP .250" gold Bead sight, 4F51J84 � $ 57.99#864-000-010AT gP .300" gold Bead sight, 4F51F84 � 57.99#864-000-011AT gC .250" gold Bead sight, 4F51F84 � 57.99#864-000-012AT gC .300" gold Bead sight, 4F51P84 57.99

Classic, Mcgivern-style gold Bead Keeps its shine, Won’t tarnish

Economical, “no-tritium” steel sight set replaces the fac-

tory plastic front and rear sights on all Glock models. Simply line up the three white dots horizontally for fast target acquisition. Sight bodies are patterned after the factory originals and won’t snag on clothing or gear. abSPECS: Steel, blued, matte finish. Sold as front/rear sight set. Fits models 17, 17L, 19, 20, 21, 21SF, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, and 39. Gunsmith installation recommended.

TRIJICON®

NO-TRITIUM SIGHT SET for GLOCK®

high-Visibility 3-Dot steel Replacement sights fit All

glock Pistol Models

#892-000-119AT no-tritium sight set for glock, 2H38N00 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 39.99

Nighttime and low light shooting tests prove sights equipped with these glowing dots are easier to see and more accurate than instinctive shooting with standard black sights. Rugged, self-luminous, 3-dot Tritium lamps provide their own long-last-

ing energy source. Lamps are mounted in silicone-sealed, metal cylinders to give maximum protection from breakage or leakage. Polished sapphire, crystal windows give a bright, crisp and perfectly round aiming dot in low light. Inlaid white rings around each sap-phire make the sights appear as standard white dots in daylight. Very narrow blades do not have the white ring and will look more like a plain black blade in daylight. Most can be installed in factory dovetail or sight base. Glock® models require use of special Trijicon installation tools to prevent sight damage. abSPECS: Steel, blued with Tritium inserts. Sights listed as Adj. are adjust-able sights to fit guns originally equipped with factory, adjustable sights. Sights listed as Fxd. fit guns originally equipped with factory, fixed sights. S&W - unless otherwise indicated, these fit 3rd generation only, will NOT fit guns originally equipped with plastic sights.

TRIJICON®

TRITIUM HANDGUN SIGHTSlow light handgun sights

Without Batteries

stoCK # fits PRiCe#892-000-115AT Beretta 92/96A1 2H107H00 $ 107.00#892-000-003AT Beretta Brigadier (Fxd.) 2H107D00 $ 107.00#892-000-004AT Beretta Cougar (Fxd.) 2H107Q00 $ 107.00#892-000-005AT Beretta 9000 (Fxd.) 2H107Q00 $ 107.00#892-000-032AT Beretta PX4 Storm (Fxd.) 2H107H00 $ 107.00#892-103-001AT Glock 17/17L/19/22/23/24/26/27/33/3

4/35 (Fxd.)2H105I90 $ 107.00

#892-103-002AT Glock 20/21/29/30/32 (Fxd.) 2H105G90 $ 107.00#892-000-166AT Glock 20/21/29/30/36/41, incl. S & SF

(Fxd, suppressor-height)2H124G00 $ 124.00

892-000-181AT Glock 20/21/29/30/41 (incl. S & SF) SUPPRESSOR HEIGHT - White front/Black rear

2H124C00 $ 124.00

892-000-182AT Glock 20/21/29/30/41 (incl. S & SF) Sup-pressor Height - Black front/Black rear

2H124J00 $ 124.00

#892-000-155AT Glock 42 2H107E00 $ 107.00#892-103-102AT Glock Installation Tool 2H130C00 $ 130.00#892-108-006AT H&K USP (Fxd.) 2H107D00 $ 107.00#892-108-007AT H&K USP Compact (Fxd.) 2H107F00 $ 107.00#892-000-158AT H&K .45C/P30/VP9 (Fxd.) 2H107N00 $ 107.00#892-102-001AT Ruger® P85® (Fxd.) 2H107B00 $ 107.00#892-000-009AT Ruger SP-101®, .357 Mag. front only 2H72D00 $ 72.00#892-100-001AT S&W 9mm, .40 (Adj.) 2H107I00 $ 107.00#892-100-004AT S&W 9mm/40 Full Size (Fxd.) 2H107F00 $ 107.00#892-100-012AT S&W 410, 909, 910 Full Size (Fxd.) 2H107M00 $ 107.00#892-100-008AT S&W 9mm Compact, Novak (Fxd.) 2H107F00 $ 107.00#892-100-011AT S&W 4006/4046 Novak (Fxd.) 2H107I00 $ 107.00#892-100-009AT S&W .45 Std., Novak (Fxd.) 2H107P00 $ 107.00#892-000-034AT S&W M&P (Fxd.) 2H107P00 $ 107.00 892-000-179AT Smith & Wesson M&P/SD9VE/SD40VE

Suppressor Height2H124F00 $ 124.00

#892-000-132AT S&W M&P Shield 2H107B00 $ 107.00#892-000-002AT S&W Sigma .40 S&W (Fxd.) 2H107F00 $ 107.00#892-104-002AT SIG 3-Dot 220,229,240,245,2340 (Fxd.) 2H107L00 $ 107.00#892-104-001AT SIG 3-Dot 225, 226, 228, 239 (Fxd.) 2H107C00 $ 107.00 892-000-177AT SIG Sauer 9mm/.357 SIG Suppressor

Height2H124F00 $ 124.00

892-000-178AT SIG Sauer .40 S&W/.45 ACP Suppres-sor Height

2H124J00 $ 124.00

#892-000-033AT Springfield XD/XDM (Fxd.) 2H107I00 $ 107.00 892-000-180AT Springfield XD/XDM Suppressor Height 2H124B00 $ 124.00#892-111-001AT Walther P-99, S&W99 (Fxd.) 2H107C00 $ 107.00#892-000-159AT Walther PPS/PPX (Fxd.) 2H107M00 $ 107.00

Items

Low profile, tactical sight set comes with a high visibility TFO

front sight that naturally attracts the eye, while the plain rear sight won’t distract your focus. Serrations on the rear sight help reduce glare in bright daylight. Made exclusively for, and available only through Brownells, these high quality sights are ideal for competi-tion, combat or low light shooting. abSPECS: Steel, matte black finish. Green Tritium/ fiber optic rod. Sight heights same as factory. Glock fits 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 models. S&W M&P fits Smith & Wesson M&P including SHIELD and .22 models (excluding .22 Compact/C.O.R.E. models), SD9 and SD40 (excluding VE models).

TRUGLO

TFO FRONT & PLAIN REAR SIGHT SETeasily transition through

All light Conditions

#902-000-148AT tfo front & Plain Rear sight set for glock, 2K64K30 � � � � � � � � � � � � � � � � � � � $ 69.99

#902-000-149AT tfo front & Plain Rear sight set for s&W M&P, 2K64C30 � � � � � � � � � � � � � � � 69.99

Tactical night sights employ a combination of self-illuminating Tri-tium inserts and photoluminescent paint for superior visibility in varying low-light conditions. Tritium dots on each side of the rear sight notch align with the front sight dot for a simple,

horizontal, three-dot sight picture that’s easy to acquire even under stress. Bright orange or yellow outline around the front insert emits a short-term glow of its own that gives the eyes more time to adjust to a rapid reduction

in ambient light—such as during a building entry—and pick up the Tritium insert. The outline is charged by exposure to any artificial or natural bright light. Yellow luminesces for approximately 10 minutes when fully charged; orange glows for approximately 5 minutes on a full charge. Fixed rear sight has a wide U-shaped notch to guide your eye quickly the front sight. Pronounced ridge on the front face enables one-handed racking of the slide in an emergency, yet is contoured so it won’t snag during the draw.

hD XR™ model has a thinner front sight post that allows the shooter to have a larger field of view, enhancing his ability to identify the target, engage it, and see the location of hits on the target at lon-ger distances. This is a big advantage for law enforcement personnel who need precise visual engagement in any light conditions. abSPECS: Machined steel sight body, de-horned, matte blued finish. Sold as front/rear sight sets. All sights have Green Tritium inserts, with Orange or Yellow outline on front sight only, as indicated in the Color column in the table below. Gunsmith installation recommended.

Dual self-illumination system for superior Visibility in Rapidly

Changing light Conditions

TRIJICON

HD™ NIGHT SIGHTS

XD HRTM

stoCK # fits ColoR PRiCe#892-000-080AT Smith &Wesson M&P, SD9/

SD40Orange 2H141N00 $ 141.00

#892-000-081AT Smith &Wesson M&P, SD9/SD40

Yellow 2H141B00 $ 141.00

#892-000-152AT S&W M&P Shield Orange 2H141L00 $ 141.00#892-000-139AT S&W M&P Shield Yellow 2H141A00 $ 141.00#892-000-082AT Springfield XD/XDM Orange 2H141I00 $ 141.00#892-000-083AT Springfield XD/XDM Yellow 2H141D00 $ 141.00#892-000-154AT Springfield XD-S Orange 2H141H00 $ 141.00#892-000-153AT Springfield XD-S Yellow 2H141L00 $ 141.00 892-000-163AT Walther PPS/PPX Orange 2H139J27 $ 141.00 892-000-162AT Walther PPS/PPX Yellow 2H139H27 $ 141.00

HD XRTM NIGHT SIGHTS 892-000-185AT FN FNP/FNS/FNX 9mm Yellow 2H149Q99 $ 149.99 892-000-186AT FN FNP/FNS/FNX 9mm Orange 2H149P99 $ 149.99 892-000-183AT FN FNP/FNS/FNX .40 Yellow 2H00EBK $ 149.99 892-000-184AT FN FNP/FNS/FNX .40 Orange 2H00NCF $ 149.99 892-000-187AT FN FNP/FNS/FNX .45 ACP Yellow 2H00QHH $ 149.99 892-000-188AT FN FNP/FNS/FNX .45 ACP Orange 2H00AHK $ 149.99 892-000-189AT Glock 17/19/22/26/32/37 Yellow 2H00JMH $ 149.99 892-000-190AT Glock 17/19/22/26/32/37 Orange 2H00AAP $ 149.99 892-000-191AT Glock 20/21/30 Yellow 2H00MWP $ 149.99 892-000-192AT Glock 20/21/30 Orange 2H149Q99 $ 149.99 892-000-193AT Glock 42/43 Yellow 2H149I99 $ 149.99 892-000-194AT Glock 42/43 Orange 2H00HPD $ 149.99 892-000-195AT H&K 45C/P30/VPO Yellow 2H00KCP $ 149.99 892-000-196AT H&K 45C/P30/VPO Orange 2H00IFC $ 149.99 892-000-197AT SIG Sauer 9mm/.357 SIG Yellow 2H149D99 $ 149.99 892-000-198AT SIG Sauer 9mm/.357 SIG Orange 2H149H99 $ 149.99 892-000-199AT SIG Sauer .40/.45 ACP Yellow 2H00KWG $ 149.99 892-000-235AT SIG Sauer .40/.45 ACP Orange 2H00HTF $ 149.99 892-000-236AT Smith & Wesson M&P/

SD9VE/SD40VEYellow 2H00FID $ 149.99

892-000-237AT Smith & Wesson M&P/SD9VE/SD40VE

Orange 2H149J99 $ 149.99

892-000-238AT Smith & Wesson M&P Shield 9mm/.40/.45

Yellow 2H00NJN $ 149.99

892-000-239AT Smith & Wesson M&P Shield 9mm/.40/.45

Orange 2H149F99 $ 149.99

892-000-240AT Springfield XD/XDM Yellow 2H149K99 $ 149.99 892-000-241AT Springfield XD/XDM Orange 2H00ESE $ 149.99 892-000-242AT Springfield XD-S Yellow 2H00DZH $ 149.99 892-000-243AT Springfield XD-S Orange 2H00GAK $ 149.99

stoCK # fits ColoR PRiCeHD NIGHT SIGHTS

#892-000-124AT Colt 1911 Orange 2H141A00 $ 141.00#892-000-125AT Colt 1911 Yellow 2H141N00 $ 141.00#892-000-127AT 1911 (Novak dovetails) Yellow 2H141F00 $ 141.00#892-000-128AT HK USP Orange 2H141J00 $ 141.00#892-000-160AT H&K 45C/P30/VP9 Orange 2H141J00 $ 141.00#892-000-161AT H&K 45C/P30/VP9 Yellow 2H141K00 $ 141.00#892-000-137AT FNH FNP-9/FNS-9/FNX-9

(all 9mm)Yellow 2H141G00 $ 141.00

#892-000-136AT FNH FNP-40/FNS-40/FNX-40 (.40 S&W)

Orange 2H141Q00 $ 141.00

#892-000-138AT FNH FNP-45/FNX-45 (.45 ACP)

Yellow 2H141P00 $ 141.00

#892-000-076AT Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39

Orange 2H133A47 $ 141.00

#892-000-077AT Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39

Yellow 2H133P47 $ 141.00

#892-000-116AT Glock 20, 21, 29, 30, 36, 41 (incl. S and SF variants)

Orange 2H140M72 $ 141.00

#892-000-117AT Glock 20, 21, 29, 30, 36, 41 (incl. S and SF variants)

Yellow 2H140B72 $ 141.00

#892-000-157AT Glock 42 Orange 2H134G92 $ 141.00#892-000-156AT Glock 42 Yellow 2H134G92 $ 141.00#892-000-164AT Ruger® SR9®/SR40®/

SR40c®

Orange 2H141H00 $ 141.00

#892-000-165AT Ruger® SR9®/SR40®/SR40c®

Yellow 2H141N00 $ 141.00

#892-000-078AT SIG P225, 226, 228, 239 Orange 2H141H00 $ 141.00#892-000-079AT SIG P225, 226, 228, 239 Yellow 2H141G00 $ 141.00#892-000-129AT SIG P220, 229 Orange 2H141G00 $ 141.00#892-000-130AT SIG P220, 229 Yellow 2H141J00 $ 141.00

Item

TRIJICON HD XR™ NIGHT SIGHTSSights for GLOCK®

#892-000-189 GL17 YLW GL601-C-600835#892-000-190 GL17 ORG GL601-C-600836#892-000-191 GL20 YLW GL604-C-600840#892-000-192 GL20 ORG GL604-C-600841#892-000-193 GL42 YLW GL613-C-600845#892-000-194 GL42 ORG GL613-C-600846

TRIJICON HD XR™ NIGHT SIGHTSSights for S&W®

#892-000-236 S&W M&P YLW SA637-C-600850#892-000-237 S&W M&P ORG SA637-C-600851#892-000-238 S&W SHLD YLW SA639-C-600855#892-000-239 S&W SHLD ORG SA639-C-600856

and many more models...

TRIJICON ACCUPOWER® 1-8x28 LED ILLUMINATED RIFLESCOPE

RED MOA RETICLE / GRN MOA RETICLE #892-000-265 / #892-000-266

RED MIL RETICLE / GRN MIL RETICLE#892-000-267 / #892-000-268

TRIJICON MRO® PATROL1/3 CO-WITNESS MOUNT / FULL CO-WITNESS / NO MOUNT #892-000-254 / #892-000-255 / #892-000-256

Available at

NEW FOR 2017!

2017_Brownells_Ad.indd 1 3/31/2017 3:51:01 PM


SINCE 1939

hA

nD

gu

n s

igh

ts

Stainless steel screws have the standard Glock 3/16" hexagonal head but a shorter shank for correct fit on threaded aftermarket front sights from War-ren Tactical, Novak, Trijicon, and others. Inexpensive, corrosion-resistant replacements for lost or dinged up screws that came with your sights. Fits standard Glock front sight tool. Use with thread-locking agent to ensure a secure installation. Recommended for all Warren front sights for Glock, including Tactical, Sevigny, Fiber Optic, and Tritium Night Sight models sold individually and in sets. Available in 2- and 5-Paks. abSPECS: Stainless steel, natural finish. .110" long shank. 3/16" (.188"/4.8mm) diameter head. 3-56 thread pitch.

WARREN TACTICAL

FRONT SIGHT SCREWS for GLOCK®

non-Corroding stainless steel Replacements for Aftermarket sights

#100-006-816AT glock front sight screws, 2-Pak, 5A5D39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 5.99

#100-006-817AT glock front sight screws, 5-Pak, 5A10I85 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.99

Steel sights drop into Glock pistols in 9mm, .357 Sig, 40 S&W and 45 GAP,

and help improve sight picture and add function-ality. All sights have serrated faces to cut glare in bright sunlight and come with installation hard-ware and tools. Rear sight gives a wide U-notch that helps the eye quickly pick up the front sight,

even in low light. Special shelf shape helps with one-handed cycling or malfunction clearing. Two set screws help secure rear sight in place once it’s drifted into the rear sight notch. Rear sight is .245" tall and designed to work with Vickers Elite front sights, or other front sights .125" wide and .245" tall. front sights are available with green or red fiber optic insert or green Tritium insert, and feature snag-free design that won’t impede draw from duty holster or from conceal-ment. All sights sold separately, and may require minor fitting. Sights do not fit 45ACP or 10mm pistols. abSPECS: Steel, Parkerized finish, matte black. Rear Sight: U-notch .145" (3.6mm) wide. Front Sight: .245" (6.2mm) high.

WILSON COMBAT

VICKERS ELITE SIGHTS for GLOCKRear & front sights help With

Quick sighting

#965-000-198AT Vickers elite Battlesight Rear sight, 5F46N49 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 49.95

#965-000-199AT Vickers elite front sight, Green Fiber Optic, 5F37F17 � � � � � � � � � � � � � � � � � � � � � 38.99

#965-000-200AT Vickers elite front sight, Red Fiber Optic, 5F37F17 � � � � � � � � � � � � � � � � � � � � � 38.99

#965-000-201AT Vickers elite front sight, Green Tritium, 5F42E76 � � � � � � � � � � � � � � � � � � � 44.99

High-quality sight systems offer exceptional brightness in a low-profile configuration that won’t hang up in your holster or slow you down. Popular three-dot system provides fast sight alignment in high stress situations. Direct replacements for factory sights. abSPECS: Steel, matte black finish. Sight heights same as factory.

#902-000-087AT 131g1 glock f/o sight set, 2K49H99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 56.44

#902-000-088AT 131g2 glock f/o sight set, 2K55C01 � � � � � � � � � � � � � � � � � � � � � � � � � 58.99

#902-000-132AT sig #8/#8 f/o sight set, 2K55G01 � � 58.99#902-000-133AT sig #6/#8 f/o sight set, 2K55E01 � � 58.99#902-000-134AT Kimber 1911 f/o sight set,

2K55Q01 � � � � � � � � � � � � � � � � � � � � � � � � � 58.99

tRitiuM/fiBeR oPtiC BRite-site - Advanced T.F.O. technology com-bines the brightness of fiber optics with the glowing property of Tritium to provide fast sight acquisition and excellent transition from daylight to darkness. Machined channels in front and rear sight housings provide maximum, ambient light gathering and protect the rods from damage while concealing them from your target. Two-dot rear and single-dot front creates an easy-to-align three-dot sight picture. 131gt1 and 131gt2 have green front and rear sights (g/g). 131gt1Y and 131gt2Y - green dot front and yellow rear sight (g/Y).SPECS: 131GT1/131GT1Y fits Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 and 39. 131GT2/131GT2Y fits Glock 20, 21, 29, 30, 31, 32 and 37. 131GT1A/131GT1B fits Glock 42. #902-000-083AT 131gt1 tfo sight set, G/G,

2K94K30 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 99.99#902-000-107AT 131gt1Y tfo sight set, G/Y,

2K94K30 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#902-000-084AT 131gt2 tfo sight set, G/G,

2K94J30 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#902-000-108AT 131gt2Y tfo sight set, G/Y,

2K94H30 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#902-000-141AT 131gt1A tfo sight set, G/G,

2K94Q30 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#902-000-142AT 131gt1A tfo sight set, G/Y,

2K94A30 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

tRitiuM BRite-site - Self-illuminating Tritium emitters glow bright green so you can find your sights, even in very low light. Surrounding white ring shows up well in daylight. 231G1 fits models 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34 and 35. 231G2 fits models 20, 21, 29, 30, 31 and 32. 231G1A fits models 42 and 43.#902-000-085AT 231g1 sight set for glock,

2K61F06 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 68.94#902-000-086AT 231g2 sight set for glock,

2K70J72 � � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99#902-000-145AT 231g1A sight set for glock 42/43,

2K70N72 � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99

fiBeR oPtiC BRite-site - Fiber optic rods gather ambient light and produce a brilliant shine in bright and low-light conditions without battery power. Con-trasting green rear and orange front en-sures fast sight recognition and align-ment. Rods are recessed and fully protected in the sight channels to survive the toughest blows and remain hidden from your target. 131g1 fits Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34 and 35. 131g2 fits Glock 20, 21, 29, 30, 31 and 32. sig #8/#8 fits Sig Sauer pistols that use a #8 front and a #8 rear. sig #6/#8 fits Sig Sauer pistols that use a #6 front and a #6 rear. Kimber fits Kimber 1911 with factory sights. XD/s fits all models of Springfield XD and XDS. s&W M&P fits 9mm & 40 S&W.

TRUGLO

SIGHT SETS for GLOCK®

Advanced sight systems for All shooting Conditions, Day & night

Tritium/Fiber Optic (TFO) technology combines the self-illuminating properties of Tritium with the light-gathering capa-bilities of fiber optics to ensure

fast sight acquisition in any light conditions from daylight to com-plete darkness. Precision-machined, steel body provides excellent strength to handle the rigors of combat or competition. Low-profile design prevents holster snagging. Fits factory dovetails; rear sight in-cludes setscrew for extra-secure installation on slide. Sold in front/rear pairs. abSPECS: Steel, matte black finish. Fiber optic/Tritium rods, green front/green rear or green front/yellow rear. Sight heights same as factory. SIG 9mm/.357 - #8 Front (F) - .952" (2.4cm) long x .166" (4mm) wide. #8 Rear (R) - .917" (2.3cm) long x .625" (1.6cm) wide. SIG .40/.45 – #6 Front (F) - .965" long x .167" (4mm) wide. #8 Rear (R) - .922" (2.3cm) long x .642" (1.6cm) wide. S&W M&P – Front - .920" (2.3cm) long x .355" (9mm) wide. Rear – .867" (2.2cm) long x .820" (2.1cm) wide. Springfield XD - Front (F) - .970" (2.5cm) long x .163" (4.2mm) wide. Rear (R) - .905" (2.3cm) long x .618" (1.6cm) wide. Fits all Springfield XD models.

TRUGLO SEMI-AUTO

TFO BRITE-SITEgathers light & illuminates for Maximum

sight Visibility in All Conditions

stoCK # fits ColoR (f/R) PRiCe 902-000-178AT Kahr K/MK/P/PM/T/TP

(with post-2004 dovetail)Green/Yellow 2K94E39 $ 99.99

#902-000-143AT Ruger LC9®/LC380® Green/Green 2K94J30 $ 99.99#902-000-144AT Ruger LC9®/LC380® Green/Yellow 2K94D30 $ 99.99#902-000-093AT Sig 9mm/.357 Green/Green 2K94B30 $ 99.99#902-000-109AT Sig 9mm/.357 Green/Yellow 2K94M30 $ 99.99#902-000-094AT Sig .40/.45 Green/Green 2K94P30 $ 99.99#902-000-110AT Sig .40/.45 Green/Yellow 2K94E30 $ 99.99#902-000-125AT S&W M&P Green/Green 2K94K30 $ 99.99#902-000-126AT S&W M&P Green/Yellow 2K94C30 $ 99.99#902-000-102AT Springfield XD Green/Green 2K94D30 $ 99.99#902-000-111AT Springfield XD Green/Yellow 2K94D30 $ 99.99

Item

#902-000-135AT springfield XD/s f/o sight set, 2K55D01 � � � � � � � � � � � � � � � � � � � � � � � � � 58.99

#902-000-136AT s&W M&P f/o sight set, 2K55A01 � � 58.99

“Extreme” tactical sight combines Truglo’s high-visibility TFO® technol-ogy with a rugged steel sight body that encases and protects the components inside from impact damage. Combina-tion of Swiss-made Tritium inserts, light-gathering fiber optic rods, and simple white target rings ensures these sights are visible 24/7, in any light conditions. Hermetically sealed TFX capsule protects the Tritium and fiber optic elements from

moisture, oils, and cleaning solvents. Sold in green front/rear sight sets for factory dovetails. tfX Pro sights are ruggedized to provide tactical professionals and other shooters with sights that deliver ultimate reliability, accuracy, and brightness no matter how tough things get. In addition, they also offer a contrasting orange ring around the front dot and a U-shaped rear notch that make it even easier to align the sights quickly. Front edge of the rear sight is angled to enable emergency one-handed slide racking. abSPECS: Smith & Wesson M&P fits all models, including Shield and .22 (ex-cluding .22 Compact/C.O.R.E. models); also fits SD9/SD40 (excluding VE).

TRUGLO TFXTM/TFXTM PRO DAY/NIGHT SIGHTS

Visible in Any light, handles the harshest operating

Conditions

stoCK # fits PRiCeSTANDARD TFXTM SIGHT SETS

#902-952-025AT 1911 Gov't Novak LoMount .260"/.450"

2K125N75 $ 133.99

#902-952-026AT 1911 Gov't Novak LoMount .270"/.450"

2K125B75 $ 133.99

#902-952-027AT 1911 Officers/Commander Novak LoMount .260"/.500"

2K125G75 $ 133.99

#902-952-028AT 1911 Officers/Commander Novak LoMount .270"/.500"

2K125J75 $ 133.99

902-000-163AT Beretta PX4 2K58D89 $ 64.99 902-000-164AT CZ 75 2K125M59 $ 133.99 902-000-165AT FN FNX9 2K125N59 $ 133.99 902-000-166AT FN FNX40 2K125P59 $ 133.99 902-000-167AT FN FNX45 2K125N59 $ 133.99#902-952-020AT Glock® 17/17L/19/22/23/24/26/2

7/33/34/35/38/392K125B75 $ 133.99

#902-952-021AT Glock® 20/21/29/30/31/32/37/40/41

2K125N75 $ 133.99

902-000-168AT Glock 20/21/29/30/31/32/37/40/41 SUPPRESSOR HEIGHT

2K125C59 $ 133.99

#902-952-022AT Glock® 42/43 2K125I75 $ 133.99 902-000-169AT H&K P30 2K125A59 $ 133.99 902-000-170AT Kahr K/MK/P/PM/T/TP (with

post-2004 dovetail)2K125K59 $ 133.99

#902-952-023AT Kimber 2K125A75 $ 133.99 902-000-171AT Ruger American 2K125B59 $ 133.99#902-952-029AT Ruger® SR Series 2K125J75 $ 133.99#902-952-030AT Ruger® LC Series 2K125Q75 $ 133.99#902-952-031AT Sig 9mm/.357 SIG (#8/#8) 2K125E75 $ 133.99#902-952-032AT Sig .40/.45 Cal. (#6/#8) 2K125E75 $ 133.99#902-952-024AT S&W M&P 2K125I75 $ 133.99#902-952-033AT Springfield XD/XDM/XDS 2K125I75 $ 133.99 902-000-172AT Steyr Mannlicher M-A1, C-A1,

S-A1, L-A12K125A59 $ 133.99

902-000-173AT Taurus Millenium G2, 709 Slim, 740 Slim

2K125B59 $ 133.99

902-000-176AT Walther CCP 2K125I59 $ 133.99 902-000-174AT Walther PPQ 2K125Q59 $ 133.99 902-000-175AT Walther PPS 2K125C59 $ 133.99 902-000-177AT Walther PPS M2 2K125L59 $ 133.99

stoCK # fits PRiCeTFXTM PRO SIGHT SETS

#902-952-045AT 1911 .45 ACP Gov't, Novak LoMount .260"/.450"

2K150P99 $ 172.99

#902-952-046AT 1911 9mm Gov't, Novak LoMount .270"/.450"

2K150M99 $ 172.99

#902-952-047AT 1911 .45 ACP Officer/Command-er, Novak LoMount .260"/.500"

2K150C99 $ 172.99

#902-952-048AT 1911 9mm Officer/Commander, Novak LoMount .270"/.500"

2K150N99 $ 172.99

#902-952-035AT CZ-75 (including Compact) 2K150L99 $ 172.99 902-000-159AT FN FNX9 2K125K59 $ 133.99 902-000-160AT FN FNX45 2K125F59 $ 133.99#902-952-039AT Glock 17/17L/19/22/23/24/26/27

/33/34/35/38/392K150J99 $ 172.99

#902-952-040AT Glock 20/21/25/29/30/31/32/37/40/41

2K150D99 $ 172.99

#902-952-041AT Glock 42/43 2K123C50 $ 139.44#902-952-042AT HK VP9/VP40/P30/P30Sk/

P30L/452K150Q99 $ 172.99

#902-952-044AT Kimber 1911 (models with fixed rear)

2K150L99 $ 172.99

902-000-161AT Ruger American 2K125A59 $ 133.99#902-952-050AT Ruger® LC9/9S/380 2K150H99 $ 172.99#902-952-049AT Ruger® SR9/SR9C/SR40/SR40C/

SR45 2K150C99 $ 172.99

#902-952-052AT Sig #8 Front/#8 Rear 2K150J99 $ 172.99#902-952-053AT Sig #6 Front/#8 Rear 2K150E99 $ 172.99#902-952-051AT S&W M&P/SD9/SD40 2K150G99 $ 172.99#902-952-054AT Springfield XD/XDM/XDS 2K150J99 $ 172.99 902-000-162AT Steyr Mannlicher M-A1, C-A1,

S-A1, L-A12K125H59 $ 133.99

902-000-156AT Walther CCP 2K125B59 $ 133.99 902-000-157AT Walther PPQ 2K125L59 $ 133.99 902-000-158AT Walther PPS M2 2K125M59 $ 133.99

902-952-2025

902-952-2054

902-952-2020

Items


brownells.com

hA

nD

gu

n sig

ht

s

All steel, fully adjustable for windage and elevation, V-rear blade gives fast sight alignment. Vertical, white line, or tritium bar pro-vides a quick focal point with the front sight. Use with a tritium or white Big Dot front sight for a bar-dot setup. abSPECS: Steel, black, matte finish. Rear Sight: Blade - .760" (19.3mm) wide, .385" (9.8mm) high. Body - 1.5" (3.7mm) long, .72" (17.5mm) wide. Fits BM-1 sight cut. Use with .180" high front sight. Front Sight: fits 65° x .330" x .075" dovetail. .210" high. .161" (4mm) diameter dot.

XS SIGHT SYSTEMS

PRO EXPRESS SIGHTeasy-to-see White line or tritium

#006-000-021AT White line express Rear sight, 6K92M29 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 97.99

#006-000-022AT tritium express Rear sight, 6K117M79 � � � � � � � � � � � � � � � � � � � � � � � � � � 123.99

#006-000-025AT White Big Dot front sight, 6K30P90 � � 35.99#006-000-026AT tritium Big Dot front sight,

6K55E59 � � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

Used by numerous IDPA and USPSA National champions, as well as law enforcement professionals, these streamlined, steel sights are built for fast target acquisition. A variety of front and rear sight configurations, including fiber optics, self-illuminating Tritium in-serts, and plain black, let you mix and match for carry, competition or tactical operations. Designed to fit factory dovetails with little to no fitting required. Ramped front sights are available with a black, serrated rear face to minimize glare, interchangeable bright red or green fiber optic rods for fast acquisition in diverse light condi-tions, or Tritium inserts with white ring outline. Rear sights have a non-serrated face and are available in plain matte black for optimal contrast in bright light, as well as in 1-dot or 2-dot Tritium configura-tions for low light and night use. Drift-adjustable for windage, with a locking setscrew to hold the setting. tactical rear sight features a unique Wave Profile contour with concave corners for an extra wide field-of-view and smooth, no-snag removal from the holster. U-shaped notch has gently radiused corners to help direct the eye quickly to the front sight acquisition. sevigny Competition rear sight features a plain, square notch and a crisp, clear outline with no ser-rations, points, edges, or other distractions. Rear face slopes back toward the shooter at the top to prevent glare. sevigny Carry has the same features as the Competition, plus rounded edges on the rear face to resist snagging on clothing during carry or unholstering. abSPECS: Hardened steel, matte black finish. Fiber Optic sights come with 1 red and 1 green rod, 2" long x .040" dia. Tritium - Front sights: Green with .100" dia. inlaid white ring outline, .050" dia. Tritium lamp. Rear sights: Yellow. .040" dia. Tritium lamp. Sight Sets - Front and rear sights are fully regulated. Front Sights - All have serrated rear face, except Tritium. Front sights for Glock include hexagonal mounting screw. Rear Sights - Sevi-gny - .150" wide notch. Tactical - .145" wide notch.

stoCK # stYle PRiCe#100-005-137AS Sevigny Carry w/1-Dot Tritium 5A73H80 $ 77.99

FRONT SIGHTS for GLOCK®

stoCK # stYle h X W PRiCe#100-005-081AT Gunsmith Blank

w/Serr. Face.3 x .125 5A31M68 $ 34.99

#100-005-075AT Black Serrated .215 x .125 5A23D84 $ 25.99#100-005-080AT Black Serrated .245 x .125 5A23M84 $ 25.99#100-005-092AT Black Serrated .185 x .115 5A25P67 $ 27.99#100-005-093AT Black Serrated .215 x .115 5A25M67 $ 27.99#100-005-094AT Black Serrated .245 x .115 5A25P67 $ 27.99#100-005-100AT Fiber Optic .185 x .115 5A34I86 $ 36.99#100-003-610AT Fiber Optic .215 x .115 5A34I86 $ 36.99#100-005-103AT Fiber Optic .245 x .115 5A34E86 $ 36.99#100-005-119AT 1-Dot Tritium .185 x .125 5A45L42 $ 47.99#100-005-121AT 1-Dot Tritium .215 x .125 5A45F42 $ 47.99#100-005-122AT 1-Dot Tritium .245 x .125 5A45I87 $ 48.99

S&W M&P SIGHT SETS

stoCK # stYle ReARstYle fRont fits PRiCe

#100-005-123AT Tactical Black Serrated

Full Size/Compact

5A55D07 $ 59.99

#100-005-141AT Tactical Fiber Optic

Full Size/Compact

5A69N31 $ 72.99

#100-005-143AT Tactical Fiber Optic

Pro/L Series

5A69B31 $ 72.99

#100-005-156AT Tactical Tritium 1-Dot

Full Size/Compact

5A79D32 $ 82.99

#100-005-170AT Tactical Tri-tium 1-Dot

Tritium 1-Dot

Full Size/Compact

5A114P73 $ 119.99


Tritium 1-Dot

Pro/L Series

5A114D73 $ 119.99


Tritium 1-Dot

Full Size/Compact

5A124D80 $ 129.99


Tritium 1-Dot

Pro/L Series

5A124M80 $ 129.99

#100-005-150AT Sevigny Competition

Fiber Optic

Full Size/Compact

5A79H09 $ 82.99

#100-005-152AT Sevigny Competition

Fiber Optic

Pro/L Series

5A79I09 $ 82.99

S&W M&P FRONT SIGHTSstoCK # stYle h X W fits PRiCe

#100-005-096AT Fiber Optic .165 x .115 Full Size/Compact

5A34M86 $ 36.99

#100-005-101AT Fiber Optic .190 x .115 Pro/L Series

5A34F86 $ 36.99

#100-005-116AT 1-Dot Tritium .165 x .125 Full Size/Compact

5A45N42 $ 47.99

S&W M&P REAR SIGHTSstoCK # stYle fits PRiCe

#100-005-106AT Tactical Full Size/Compact 5A35K78 $ 38.99

SIG REAR SIGHTSstoCK # stYle fits PRiCe

#100-005-097AT Tactical Sig 220/226 5A35J78 $ 38.99

SIGHT SETS FOR GLOCK®

stoCK # ReAR stYle fRont stYle PRiCe#100-003-026AS Tactical Black Serrated 5A55G07 $ 59.99#100-008-833AS Tactical Fiber Optic 5A70G69 $ 76.99#100-005-159AS Tactical Tritium 1-Dot 5A81B70 $ 88.99#100-005-172AS Tactical Tritium 1-Dot Tritium 1-Dot 5A119H36 $ 129.99#100-003-609AS Tactical Tritium 2-Dot Tritium 1-Dot 5A124L80 $ 129.99#100-003-027AS Sevigny Competition Black Serrated 5A72A08 $ 84.99#100-003-608AS Sevigny Competition Fiber Optic 5A84L88 $ 89.99

#100-005-125AS Sevigny Carry Black Serrated 5A55L07 $ 59.99#100-005-144AS Sevigny Carry Fiber Optic 5A70K69 $ 74.99#100-005-160AS Sevigny Carry Tritium 1-Dot 5A81A70 $ 86.99#100-005-173AS Sevigny Carry Tritium 1-Dot Tritium 1-Dot 5A114E73 $ 119.99

REAR SIGHTS FOR GLOCK®

stoCK # stYle PRiCe#100-005-108AS Tactical 5A35E78 $ 38.99#100-005-136AS Tactical w/1-Dot Tritium 5A73L80 $ 77.99#100-005-166AS Tactical w/2-Dot Tritium 5A85I46 $ 89.99#100-005-114AS Sevigny Competition 5A44L52 $ 46.99#100-005-109AS Sevigny Carry 5A35I78 $ 38.99

WARREN TACTICAL

PISTOL SIGHTS

“Working” sights for Duty, Carry, or Competition; fiber optic & tritium options

Tactical 2-Dot Tritium Rear/ Tritium Front

Tactical Rear/ Fiber Optic

Front

Sevigny Comp Rear/Std Front

QUESTIONS BEFORE YOU BUY — Ask Our Full-Time Tech Staff

Starting with the brightness and durability of their original Tritium night sights, TruGlo add-ed all of their TFX PRO features to give you the advantage when you need it the most. The front sight's "focus lock" ring works with the U-notch rear sight for even faster focus. Angled rear sight edge enables emergency one-handed slide racking. Swiss Tritium inserts deliver maximum brightness for unmatched vis-ibility in low-light shooting conditions. Snag-resistant ma-chined steel sight bodies have TruGlo's ultra-hard Fortress Finish™ that provides a perma-nent protective coating for maximum protection against scratches, nicks, and holster wear. Pistol will still fit standard holsters with these sights installed.

TRUGLO

TRITIUM PRO NIGHT SIGHTSultra-Rugged & Reliable, the

next step in tritium sight Development

Glock 17 (etc.)

stoCK # fits PRiCe#902-000-180AT Beretta PX4 2K73B39 $ 79.99#902-000-182AT FN FNX40 2K73F39 $ 79.99#902-000-183AT FN FNX45 2K73Q39 $ 79.99#902-000-181AT FN FNX9 2K73C39 $ 79.99#902-000-184AT Glock 17/17L/19/22/23/24/26/27/3

3/34/35/38/392K73N39 $ 79.99

#902-000-187AT Glock 17/17L/19/22/23/24/26/27/33/34/35/38/39 SUPPRESSOR HEIGHT

2K73M39 $ 79.99

#902-000-185AT Glock 20/21/25/28/29/30/31/32/37/40/41

2K73E39 $ 79.99

#902-000-188AT Glock 20/21/25/28/29/30/31/32/37/40/41 SUPPRESSOR HEIGHT

2K73C39 $ 79.99

#902-000-186AT Glock 42/43 2K73G39 $ 79.99#902-000-189AT H&K P30 2K73B39 $ 79.99#902-000-179AT Kahr 2K73M39 $ 79.99#902-000-190AT Kimber 1911 w/factory fixed rear

sight2K73P39 $ 79.99

#902-000-191AT Novak 1911 .260" high front/.450" high rear

2K73F39 $ 79.99


2K73N39 $ 79.99


2K73K39 $ 79.99


2K73J39 $ 79.99

#902-000-197AT Ruger American 2K73J39 $ 79.99#902-000-196AT Ruger LC Series 2K73M39 $ 79.99#902-000-195AT Ruger SR Series 2K73C39 $ 79.99#902-000-199AT SIG w/#6 front & #8 rear 2K73L39 $ 79.99#902-000-198AT SIG w/#8 front & rear 2K73E39 $ 79.99#902-000-206AT Smith & Wesson Bodyguard .380

ACP2K73K39 $ 79.99

#902-000-205AT Smith & Wesson M&P (incl. Shield & .22 LR), SD9, SD40

2K73K39 $ 79.99

#902-000-204AT Springfield XD 2K73N39 $ 79.99#902-000-200AT Taurus Millenium G2, 709 Slim,

740 Slim2K73N39 $ 79.99

#902-000-203AT Walther CCP 2K73I39 $ 79.99#902-000-201AT Walther PPQ 2K73J39 $ 79.99#902-000-202AT Walther PPS 2K73A39 $ 79.99

Springfield XD

Novak

Sometimes you need en-hancements, sometimes you sim-ply need a bright, steady-glowing, reliable Tritium night sight that comes through when the lights go out. These sights look like standard white dot sights in daylight and transition to glowing green dots as the ambient light decreases. Self-illuminating Tritium does not need batteries and does not need to be "charged" with exposure to sunlight - it simply glows on its own! Three-dot sight pattern; all dots are green. These sights have strong, "de-horned" machined steel housings, with a low enough profile that they won't interfere with putting your gun in a standard holster made for it. abSPECS: Kimber fits Kimber 1911 with factory sights. SIG #8/#8 fits Sig Sauer pistols that use a #8 front and a #8 rear. SIG #6/#8 fits Sig Sauer pistols that use a #6 front and a #8 rear.

TRUGLO

STANDARD TRITIUM NIGHT SIGHT SETS

self-illuminating sights You Can see in Any light

stoCK # fits PRiCe#902-000-085AT Glock 17/17L/19/22/23/24/26/27

/33/34/352K61F06 $ 68.94

#902-000-086AT Glock 20/21/29/30/31/32 2K70J72 $ 74.99#902-000-145AT Glock 42/43 2K70N72 $ 74.99#902-000-131AT Kimber 1911 (w/factory fixed

rear sight)2K70D72 $ 74.99

902-000-207AT Novak 1911 .260" high front/.450" high rear

2K62P29 $ 69.99


2K62B29 $ 69.99


2K62Q29 $ 69.99


2K62H29 $ 69.99

902-000-212AT Ruger LC Series 2K62N29 $ 69.99 902-000-211AT Ruger SR Series - Front sight only 2K31P19 $ 34.99#902-000-129AT SIG #8/#8 2K70K72 $ 74.99#902-000-130AT SIG #6/#8 2K70A72 $ 74.99

Items


SINCE 1939

hA

nD

gu

n s

igh

ts

Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The

more light, the brighter the rods glow. 3-dot sight picture with con-trasting red and green fiber optic inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. abSPECS: Aluminum body, black finish. Red and green fiber optic rods. Browning Buckmark fits current Buckmark with rear sight more than 1" long. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ru-ger Mark II 678 fits 67/8" long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will not fit P-85®. Ruger Single Six fits New Model Single Six® - .22 and .32 caliber. Taurus PT fits PT111, PT132, PT138, PT140, and PT145 series pistols with screw-on sights. Taurus PT/Pro fits PT100, PT111, PT140, PT145, PT945, PT745 Millennium, and Mil-lennium Pro pistols with dovetail sights. Colt Series 80 Adjustable Sight is a replacement adjustable sight that fits the dovetail of guns that were originally fit with factory fixed sights.

glowing fiber optic Dots for fast sight Pickup

stoCK # fits tYPe PRiCe#962-000-022AT Browning Buckmark Adj. 2F50N96 $ 52.99#962-563-590AT Glock, all except G42 Fixed 2F42F99 $ 49.99#962-000-105AT Glock 42 Fixed 2F44B32 $ 49.99#962-000-093AT Ruger® GP100®, Redhawk®,

Super Redhawk®, Super Black-hawk® Hunter

Adj. 2F53M31 $ 59.99

#962-000-095AT Ruger® Mark II/III™ w/ 67/8" tapered barrel

Adj. 2F53G31 $ 59.99

#962-000-094AT Ruger® Mark II/III™ and 22/45™ w/bull & slab-sided bbl

Adj. 2F52B52 $ 54.99

#962-563-600AT Ruger P-Series Fixed 2F42L37 $ 44.99#962-000-096AT Ruger® New Model Single Six®

(.22 & .32 cal.)Adj. 2F53G31 $ 59.99

#962-000-107AT Ruger® SR22® Fixed 2F53C84 $ 62.99#962-000-097AT Ruger® SR9®/SR9c®/SR40®/

SR40c®

Adj. 2F53B31 $ 59.99

#962-000-104AT Ruger® LC9® Fixed 2F44G32 $ 49.99#962-000-091AT Smith & Wesson M&P, all mod-

els except Shield & .22 LRFixed 2F42J37 $ 44.99

#962-000-109AT Smith & Wesson M&P .22 LR Adj. 2F53C84 $ 62.99#962-000-106AT Smith & Wesson M&P Shield Fixed 2F44F32 $ 49.99#962-000-108AT Smith & Wesson M&P Body-

guard .380Fixed 2F44Q32 $ 49.99

#962-000-053AT Springfield XD, all models Fixed 2F42Q37 $ 44.99#962-000-052AT Taurus 111/132/138/140/145/

Millennium/Millennium Pro w/screw-on sights

Fixed 2F42B37 $ 44.99

#962-000-086AT Taurus 100/111/140/145/745/ 24-7/Millennium/Millennium Pro w/dovetail sights

Fixed 2F44D32 $ 49.99

WILLIAMS FIRE SIGHTS

Available at www.brownells.com/sightcalculator

— Advise # — 24/7 express sight set, except P13/P14 & S&W Shield, 6K107H79 � � � � � � � � � � � � � �$ 123.99

— Advise # — 24/7 express sight set, except P13/P14 & S&W Shield, 6K112C29 � � � � � � � � � � � � � � 127.99

— Advise # — 24/7 express sight set, P13/P14 Limited, 6K166H69 � � � � � � � � � � � � � � � � � � � � � � � � � � � 176.99

— Advise # — 24/7 express sight set, S&W Shield, 6K85G59 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

Matched sight set features green tritium on both the front and rear sights for fast pickup under any light con-ditions. Rear sight features

vertical tritium bar with a highly visible, white border; front includes tritium dot surrounded by a white ring. Rounded, low-profile design won’t slow your draw. Designed to directly replace factory sights. standard Dot (stD) front sight has narrow, white ring around the tritium dot for precise aiming at longer distances. Big Dot (BD) front sight has a large, easy-to-see white ring surrounding the tritium dot. Designed for for suppressed Glocks, the suppressor height Big Dot (shBD) and suppressor height standard Dot (shstD) sights ensure shooter has a proper sight picture. abSPECS: Machined steel, matte black. Big Dot .161" (4mm) diameter dot. Standard Dot .110" (2.8mm) diameter dot. 1911 Govt., Comm., Officers: Rnd. fits round top slides. Novak fits slides with Novak-style sight cut. Older Browning HP requires .303" x 60° front sight dovetail. 1911 front requires 65° x .330" x .075" front sight dovetail. All rear sights are secured with two set screws. Para P13/P14 Limited rear sight has adjustment screws for elevation. Gunsmith installation recommended.

stK# BD tRit eXP set

stK# stD tRit eXP set

fits

#006-000-040AT #006-000-060AT Browning HP & Mk II std. dovetail#006-115-002AT #006-000-061AT Glock, all 9mm, .357, .40, and

Glock 36#006-000-041AT #006-000-062AT Glock 20, 21, 29, 30#006-000-052AT NA Kimber Compact#006-115-004AT #006-000-074AT Kimber Custom & Ultra Carry#006-115-001AT #006-000-063AT 1911 Govt. Rnd#006-000-042AT #006-000-064AT 1911 Govt. Rnd Novak#006-000-043AT NA 1911 Comm. Rnd#006-000-202AT #006-000-203AT Novak - Suppressor Height#006-000-120AT #006-000-121AT Para P10, P12, C6.45, C7.45#006-000-122AT #006-000-123AT Para P13, P14 Limited, Adj.#006-000-172AT NA Ruger® SR9®

#006-000-055AT NA SIG 220#006-000-049AT NA S&W 4006, 5903, 5906, CSpl

9mm#006-000-179AT NA S&W Shield 9mm, 40#006-000-046AT NA Springfield 1911 Loaded006-000-056AT 006-000-079AT Springfield XD & HS2000, SIG 225,

226, 228, 229, 2340, 2009

XS SIGHT SYSTEMS SEMI-AUTO

24/7 TRITIUM EXPRESS SIGHT SET

Quick sight Acquisition, Day or night

Models

High-visibility sight combinations put you on target faster in high stress or low light conditions by pulling your eyes to the front sight. Sight set includes non-tritium, white line V-notch for the rear sight, green Tritium dot surrounded by a white ring for the front. Low profile, no-snag design is great for carry and combat competi-tion guns. Matched sight sets offer direct replacement of factory sights. Big Dot (BD) front sight has a large, easy-to-see white ring surrounding the Tritium dot. standard Dot (stD) front sight has nar-row white ring around the Tritium dot for precise aiming at longer distances. s&W Airlite ti replaces pinned front sight on fixed sight guns, requires drilling for pin. suppressor height models provide proper sight on a gun fitted with a sound suppressor or recoil com-pensator. abSPECS: Machined steel, matte black. Big Dot - .161" (4mm) dia. dot. Stan-dard Dot - .110" (2.8mm) dia. dot. All rear sights are secured with one or two setscrews. All sights are fixed. Gunsmith installation recommended. All sights are fixed. Gunsmith installation recommended.

XS SIGHT SYSTEMS SEMI-AUTO

TRITIUM EXPRESS SIGHT SET

fast sight Pickup in low light

— Advise # — BD or stD express sight set, 6K82N29 � $ 93.99

suPPRessoR height

stK# BD stK# stD fits#006-102-017AT #006-098-017AT Glock 36, all 9mm, .357, .40 Cal.#006-102-023AT NA Glock 20, 21, 29, 30#006-000-182AT #006-000-199AT Glock 42/43#006-000-204AT NA Novak - Suppressor Height#006-000-156AT #006-000-157AT S&W M&P#006-000-180AT NA S&W Shield, 9mm, 40 Cal#006-102-200AT NA SIG 225, 226, 228, 229, 2340, 2009#006-000-183AT NA SIG 238#006-102-019AT NA Walther PPK

NA #006-000-177AT Ruger LC9

stK# BD stK# stD fits#006-000-189AT #006-000-190AT Glock 36, all 9mm, .357, .40 Cal.#006-000-195AT #006-000-196AT Glock 20, 21, 29, 30

— Advise # — suppressor height tritium exp sight set, 6K91K19 � � � � � � � � � � � � � � � � � � � � � � � � �$ 103.99

#006-115-003AT s&W Airlite ti Big Dot tritium, Front only, 6K55E59 � � � � � � � � � � � � � � � � � � � � � �$ 63.99

White line, V-notch rear sight and a white dot front post pull your eye to the front sight

in high stress or low light conditions. Presents a very fast, highly vis-ible sight picture to get you on target quickly. Low-profile, no-snag design (even the top of the front sight body is rounded) is great for carry and combat competition guns. Matched front and rear sets offer direct replacement of factory sights. Big Dot (BD) provides improved speed when engaging targets at close range. standard Dot (sD) gives better long range accuracy. suppressor height mod-els provide proper sight on a gun fitted with a sound suppressor or recoil compensator. abSPECS: Machined steel, matte black. Big Dot (BD) - .161" (4mm) dia. dot. Standard Dot (STD) - .110" (2.8mm) dia. dot. Fits factory dovetails on all 9mm, .40 S&W, and .357 Sig Glock pistols, including G36. Suppressor Height Big Dot (SHBD) - Rear Sight - .33" (8.2mm) high. Front Sight - .38" (9.6mm) high. Suppressor Height Standard Dot (SHSTD) Rear Sight - .42" (10cm) high. Front Sight - .4" (10.2mm) high. Fits factory dovetails on all 9mm, .40 S&W and .45 ACP Glock pistols. All sights are fixed. Gunsmith installation recommended.

XS SIGHT SYSTEMS

EXPRESS SIGHT SET for GLOCK®

low Profile, high Visibility, Rapid sight Picture

#006-099-017AT BD sight set for glock, 6K55Q59 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.99

#006-000-188AT shBD sight set for glock, 9mm/40S&W, 6K64D49 � � � � � � � � � � � � 73.99

#006-000-194AT shBD sight set for glock, . 45 ACP, 6K64G49 � � � � � � � � � � � � � � � � � � 73.99

#006-100-017AT stD sight set for glock, 6K55G59 � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

#006-000-187AT shstD sight set for glock, 9mm/40S&W, 6K64G49 � � � � � � � � � � � � 73.99

#006-000-193AT shstD sight set for glock, . 45 ACP, 6K64D49 � � � � � � � � � � � � � � � � � � 73.99

Replace lost, broken, stripped or rounded off screws on Trijicon front night sights for Glock pistols. 3/16" hex head fits standard front sight wrenches used for most threaded Glock front sights. Use with a low to medium strength thread locking agent for a solidly mounted front sight that won’t “shoot off.” Fits Trijicon brand Tritium front sights for all Glock models. abSPECS: Steel, matte, blue finish. 5 per pak. 2.5 mm x 0.5 mm thread, .090" long shank, 3/16" dia. hex head.

TRIJICON® REPLACEMENT FRONT SIGHT SCREWS for GLOCK®

Replaces lost or Damaged screws on night sights

#892-000-049AT front sight screws, 5-pak, 2H18G00 � � $ 18.00

Replacement front sights have a high-visibility white outline surrounding a Tritium insert for easy sight acquisition in all types of ambient light—from bright sunlight to nighttime, and anything in between. Low, streamlined, no-snag shape makes these sights excellent for concealed carry guns. Designed to fit factory dovetails.

XS SIGHT SYSTEMS 24/7 TRITIUM EXPRESS REVOLVER FRONT SIGHTS

easy-to-see in Any light; no-snag shape for Concealed Carry

S&W J-Frame #006-000-173AT s&W J-frame 24/7 front sight, 6K55D59 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 63.99

#006-000-171AT Ruger lCR 24/7 front sight, 6K55B59 � � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

Models available for Smith & Wesson J-Frame and Ruger® LCR®. abSPECS: Machined steel, matte black finish. S&W J-Frame - .161" (4mm) dia. dot; LCR - .110" (2.8mm) dia. dot. Both sights fit factory dovetails. Gunsmith installation recommended.

LCR

BUSINESS AND SHIPPING POLICIESGUARANTEES: It is our policy to carry only those products that are the best available and will please YOU - regardless! We personally guarantee, on a money-back basis, that you will be pleased with the products you buy from us. Your satisfaction is guaranteed 100% - period!

TRANSPORTATION CHARGES: The Brownells Flat-Rate Shipping Program applies to all orders. Exceptions to this program are listed on the following page, and below the product in the catalog.

DELIVERY: We have an unusual record for Fast Service, generally delivering faster and sooner than if you were to order locally. We are constantly working to improve our service to you.

FLAT-RATE SHIPPING PROGRAM We offer four flat-rate shipping options to all of the United States including Alaska, Hawaii, Puerto Rico, and all protectorates. We use all of the domestic shipping services—USPS, UPS, and FedEx—and will select the best shipper to deliver your order in the time frame you request. Choose the shipping option, listed below, that best meets your requirements. For our current shipping rates, please call 800-741-0015 or visit Brownells.com.

METHODS OF PAYMENT:CASH: Send remittance in personal check,

cashier’s check or money order to avoid loss in the mail. Payment by cashier’s check or money order will avoid any possible delay for personal check or company check clearance.

C.O.D.: C.O.D.’s are subject to an $18.00 charge per order. Carriers accept cashier’s checks, money orders and pre-approved *Personal or *Business checks. Brownells must pre-approve payment by Personal or Business check; contact us for details. (No 2-party checks.)

OPEN ACCOUNT: Accepted only from firms rated “Good” or better in Dun & Bradstreet, and recognized, government institutions.

CREDIT CARD: Visa, Mastercard, Discover and American Express cards are accepted. Please give your card number, expiration date, and the name on the card.

WIRE TRANSFER: Permits direct, immediate transfer of funds from your bank to our bank. For large phone orders exceeding Credit Card or C.O.D. limits, this is the best method of payment. To perform a wire transfer, please call us during normal business hours at 641-623-5401 and we will assist you with the transaction. Please include an extra U.S. $30.00 for banking fees. Your bank must forward your Name, Address, Country, and Invoice Number with the transfer. We ship immediately.

EXTRA CHARGES: Are subject to change without prior notice.

C.O.D.: $18.00 per order.

ADULT SIGNATURE REQUIRED: All FFL-restricted items require an additional $7.00 fee for delivery confirmation with an adult signature required.

HAZARDOUS: All hazardous material ships alone and will include an additional single charge per order mandated by shippers. Please ask for current amount at time of order

SATURDAY DELIVERY: If you want your package delivered on Saturday, there will be an additional charge. Saturday delivery not available in all areas. Please be at shipping address at time of delivery.

SHIPPING ADDRESS: It is very important that we have your street address AND your P.O. box, if applicable.

PLEASE SEND SUFFICIENT FUNDS: In cases where insufficient funds are sent to cover price increases and you have not advised us to ship “Balance COD”, we will ship your order to you the same day it is re-ceived as nearly complete as possible. This prevents delaying your order and inconveniencing you. Whenever possible, please send a little extra to cover price increases. Any overage will be refunded by Bank Check with the order. Or, mark the “Bal-ance COD” box on the order blank and we will send a C.O.D. billing for the amount that’s short.

E-MAIL: We will be happy to notify you by e-mail when your order ships, giving you the tracking number, order number, and order total.

FIREARMS SALES: All sales of FFL-restricted items are made in strict accordance with all federal regulations. (1) To purchase an action, frame, or barreled action, you must send a copy of your current FFL, SIGNED with an original signature in ink, which will be kept on file. There can be no changes or al-terations to any information on the copy of the FFL. (2) Your order for controlled items will be shipped to the address on the signed FFL. No other address can be used.WARRANTIES: All warranties, whether expressed or implied, are limited to those of the manufacturer.

CATALOG PRICES: Prices shown in this catalog are not intended to establish prices in any community other than our place of business in Montezuma, Iowa, at the time this catalog was published, July 15, 2017. Price changes will be made without prior notice. All merchandise will be sold at the price in effect at Brownells, Inc. at the time the shipment is made.

PAGE 305Orders/Tech: 800-741-0015order on the web

brownells.com

3-5 DAY GROUND SERVICE Our most popular shipping option, offering you an excellent balance of speed and economy. Some weight restrictions may apply.

4-7 DAY STANDARD SERVICE A money-saving option for eligible orders. Some weight restrictions apply. No hazardous, ORMD, or FFL items.

2ND DAY SERVICE U.S. orders must be received by 2:00 p.m., Central Time, to be shipped that same day. Hazardous, ORMD, and aerosol products cannot be shipped via this method and must ship separately via 3-5 Day Ground Service. 2nd Day Service not guaranteed.

NEXT DAY SERVICE U.S. orders must be received by 2:00 p.m., Central Time, to be shipped that same day. You should receive your merchandise the NEXT business day. Hazardous, ORMD, and aerosol products cannot be shipped via this method and must ship separately via 3-5 Day Ground Service.

FREE BACK ORDER SHIPPING Back orders (out-of-stock items not shipped in a multiple-item order) are shipped free. Free shipping does not apply to single-item orders. Shipping charges are assessed on first item(s) shipped. Subsequent item(s) are shipped free. Items with fixed shipping rates will be charged at time of shipment.

SHIPPING RESTRICTIONS Ground & Standard Shipping • USPS forbids the shipping of ORM-D and hazardous materials, including bluing salts, cold blues, hydrochloric acid, paint remover, Parkerizing solution, plating chemicals, rust remover, Dicro-Clean #909, Comet Flux, gun oils and waxes, volatile petro solvents, and other hazardous chemicals. ALL of these restricted items must go UPS or FedEx Ground in the continental U.S.A. Some

may be subject to an additional hazardous materials fee .

2nd Day & Next Day • Because these shipments go by air, they cannot contain any of the following: aerosols; bluing salts/chemicals or cold blues; lacquers; plating chemicals; oils; stock finishes or thinners.

Oversized Items • Some large items may incur an additional shipping charge from UPS or FedEx. If this applies to anything in your order, you will be informed at the time of checkout (website) or by our phone order taker.

• If your order contains restricted and non-restricted items, your order will be split. This WILL generate 2 orders AND 2 shipping charges. Example: $15.95 for standard shipping of restricted items and $27.95 for 2nd day shipping of unrestricted items. Total shipping charges would be $43.90. Rates are for example only. For current shipping rates call 800-741-0015 or visit Brownells.com

OXYNATE BLUING SALTS The 40 lb. cans of Oxynate® #7 (#082‑007‑140KT) and Oxynate® #84 (#082‑084‑140KT) Bluing Salts (both on page 391) require an additional shipping charge above the flat-rate shipping program, plus applicable hazardous material charges.

TRUCK SHIPPING Items that cannot be shipped by USPS Retail Ground, UPS or FedEx will be sent via truck. We will ship by the fastest, most direct way whenever possible. Heavy items that must be shipped via truck are noted in the catalog. If you order one of these items, we will call you with the truck charges. SORRY, BUT WE CANNOT SHIP C.O.D. MERCHANDISE ORDERS BY TRUCK.


SINCE 1939 PAGE 306

We do not artificially mark up our prices to cover potential increases from the manufacturers. When notified of a price adjustment, we change our price at that time. As a result, prices are subject to change without notice.

Products marked with this symbol have passed a rigorous test of function and quality, and have been awarded the American Pistolsmiths Guild “Seal of Approval.”

PAY ANY WAY

VISA/MC/Discover/Am Ex/IMPAC/CrossCheck/C.O.D.

HOLIDAY SCHEDULE We will be closed for the following:

2017Labor Day – Sun. 3 & Mon. 4 Sept.Thanksgiving – Thurs. 23 Nov.

Christmas – Sun. 24 & Mon. 25 Dec.

2018New Year’s – Sun. 31 Dec.

& Mon. 1 Jan.Memorial Day – Sun. 27

& Mon. 28 MayIndependence Day – Wed. 4 July

Labor Day – Sun 2. & Mon. 3 Sept.

Thanksgiving – Thurs. 22 Nov.Christmas – Sun. 23 & Mon. 24

& Tues. 25 Dec.

ORDER LINE HOURS - Mon. - Fri. 7:30am - 8:00pm CST Sat. 8:00am - 5:00 pm CST

LIVE CHAT HOURS - Mon. - Fri. 7:30am - Midnight CST Sat. & Sun. 8:00am - 5:00pm CST

GUNTECH HOURS - Mon. - Fri. 8:30am - 4:30pm CST

RETAIL STORE HOURS - Mon. - Sat. 9:00am - 6:00pm CST Sun. 11:00am - 5:00pm CST (beginning 9-10-17)

Order Recording Lines Open 24 Hours Per Day

At , The Customer Is Always

Your Satisfaction Guaranteed – Period! Here’s our pledge to you, which has never changed: If you aren’t completely, 100% satisfied with any purchase you receive from Brownells, for any reason, at any time, return it for a full refund or exchange. No hassle, no problem. We don’t bog you down in endless paperwork. Your complete satisfaction with each and every product we sell is what’s most important to us.

1) INTERNATIONAL VISA, MASTERCARD, DIS-COVER OR AMERICAN EXPRESS BANK CARD: Fast, convenient. Give card number, expiration date and card holder's name as shown on the card. Current ex-change rates apply. We ship immediately.

2) INTERNATIONAL MONEY ORDER IN U.S. DOL-LARS made payable to Brownells, Inc. We ship im-mediately.

3) BANK DRAFT OR CHECK IN U.S. DOLLARS written on an International U.S. Bank and made payable to Brownells, Inc. Have your bank put the "routing numbers" on the face of the Bank Draft or Check. We ship as soon as the Draft or Check clears, usually 2 weeks.

4) CHECK DRAWN ON YOUR BANK: Canada: Make payable in U.S. funds. If pay-able in Canadian currency (CAD$), we hold the order until the check clears and charge the exchange rate charges against the order. Overseas: Do not send a check drawn on your bank payable through an International Bank. The bank deducts a US$25 to US$50 fee to handle this , and will not process checks under US$50. We will return the check to you, and ask for payment by an alterna-tive method.

5) SEND U.S. DOLLARS with order. We ship immediately.

6) WIRE TRANSFERS: Direct, immediate transfer of funds from your bank to ours. To perform a wire transfer, please call us during normal business hours at 641-623-5401, and we will assist you with the cor-rect account information so your bank can wire U.S. Dollars through their U.S. correspondent bank. Please include an extra US$30.00 for banking fees. Your bank must forward your Name, Address, Country, and In-voice Number with the wire transfer. You must notify us that the wire transfer is coming and provide your Name, Address, Country, Invoice Number, and U.S. Dollar amount so we can match the funds to your or-der. We ship immediately.

7) PROFORMA INVOICE: Send your list of items wanted, and we will total the order, include document fees and shipping charges and advise you of the to-tal. If re-contacts, re-calculations, re-notifications are required, we will add additional document fees. No product is held on a proforma invoice. Your order will be shipped upon receipt of payment.

8) C.O.D. SHIPMENT: Not available.

INTERNATIONALPAYMENT METHODS

CUSTOMER PAYS ALL SHIPPING CHARGESFROM GRINNELL, IOWA, USA

OVERSEAS & CANADIANSHIPMENTS

INTERNATIONAL ORDERSvia - FAX - PHONE - E-Mail

You must use English. You must provide us: 1) Name, Address, Country Name, and Postal Code exactly as it must appear on shipping label. 2) Country Code plus FAX Number. 3) Country Code plus Phone Number. We must have all of the above to ship your order, or to contact you.

SHIPMENT METHODS

FEDEX INTERNATIONAL PRIORITY - 2 to 3 business day de-livery time to more than 215 countries (overnight to Canada). Rates include door-to-door pickup and delivery with in-house customs clearance. Tracking number available. Maximum length: 108" (274cm). Maximum size: length plus girth can-not exceed 165" (419cm). Maximum weight per package: 150 lbs. (68 kilos).

PRIORITY MAIL EXPRESS INTERNATIONAL - 3 to 5 day de-livery time. Tracking number available. Brokerage fees NOT included in shipping charges. Size and weight limits vary be-tween countries. Contact our International Department for specific requirements.

PRIORITY MAIL INTERNATIONAL - 6 to 10 day delivery time. Tracking number available. Brokerage fees NOT included in shipping charges. Size and weight limits vary between countries. Contact our International Department for specific requirements.

AIR FREIGHT - No size or weight restrictions. Contact our In-ternational Department for freight quotes. We use a variety of freight forwarders. Our International Department will work with you to select the right one to deliver your order.

TRUCK FREIGHT - Expensive; check before specifying. Bluing salts, aerosol (spray can) products, buffers, bluing chemicals, pedestals and heavier items must be shipped Truck Freight. Minimum billing is 500 lb. rate.

RESTRICTIONSPRIORITY MAIL INTL, AIR FREIGHT AND UPS - Cannot ship Hazardous or ORMD products: aerosol (spray can) products; Baking Lacquer; bluing salts; cold blues; Dicro-Clean #909; hydrochloric acid; paint remover; plating chemicals; Rust Remover; Comet Flux; gun oils; waxes; volatile petro sol-vents. Large gun cases/cabinets, long gun boxes, and buffer pedestals exceed size limit. Long pipe burners, unless we cut them in half for you, are too long. Buffers exceed weight limits. If you order a restricted item, we will cancel it on your order and not ship.OCEAN FREIGHT - Not available.

ORDERS FOR GUNS & GUN PARTS An Export License is required on all orders totaling $100 in regulated gun parts shipping to an International address. NOTE: If your order requires an export license, there will be an additional fee. Actions, barreled actions, pistol frames, barrels, barrel liners and cylinders require an export license for all orders shipped to an International address. A Gun Part is “Any item necessary to the operation of the weapon.” Examples of Gun Parts are: triggers, sears, hammers, safeties, magazines and sights.

QUESTIONS REGARDING INTERNATIONAL SHIPPING?

Please e-mail us at [email protected] or call 641-623-4000.

BROWNELLS EUROPECONTACT INFORMATION

Brownells Czech Republic +420 601 153 799 [email protected] www.brownells-cesko.cz

Brownells Finland 09 5122933 [email protected] www.brownells.fi

Brownells France 0468 710131 [email protected] www.brownells.fr

Brownells Germany 04321 5562 358 [email protected] www.brownells-deutschland.de

Brownells Ireland [email protected] [email protected] www.brownells.ie

Brownells Italy 39 0364 1955195 [email protected] www.brownells.it

Brownells Norway 37 17 00 00 [email protected] www.brownells.no

Brownells Russia 8 (800) 500 6751 [email protected] www.brownells-russia.com

Brownells Slovakia +421 917 764 623 [email protected] www.brownells.sk

Brownells Spain 34 926 532900 [email protected] www.brownells.es

Brownells Sweden [email protected] www.brownells.se

Brownells Switzerland 41 91 730 99 15 [email protected] www.brownells.ch

Brownells UK 0845 22 66 055 [email protected] www.brownells.co.uk

PAGE 306SATISFACTION GUARANTEED

SINCE 1939

OFFICE 641-623-5401RETAIL STORE 641-236-0001 INTERNATIONAL ORDERS

641-623-4000FAX LINE 641-623-3896

xs sight systems shotgun williams tactical ghost universal ...€¦ · orders/tech 800-741-0015...

Documents