xth bi-directional inverter - sinetech aug14.pdf · Ÿ true sine wave voltage Ÿ reliable and...
TRANSCRIPT
SinetechAdvanced Power Products
XTHBI-DIRECTIONAL INVERTER
MODEL XTH 3000-12 XTH 5000-24 XTH 6000 48 XTH 8000 48
Nominal battery voltage 12V 24V 48V 48V
Input voltage range 9.5 - 17V 19 - 34V 38 - 68V 38 - 68V
Continuous power @ 25°C 2500VA 4500VA 5000VA 7000VA
Power 30 min. @ 25°C 3000VA 5000VA 6000VA 8000VA
Power 5 sec. @ 25°C 7.5kVA 12kVA 15kVA 21kVA
Maximum load Up to short circuit
Maximum asymmetric load Up to Pcont.
Load detection (stand-by) 2 to 25 W
Cos φ 0.1-1
Maximum efficiency 93% 94% 96% 96%
Consumption OFF/Stand-by/ON 1.2W/1.4W/14W 1.4W/1.8W/18W 1.8W/2.2W/22W 1.8W/2.4W/30W
Output voltage
Output frequency
Harmonic distortion
Overload and short-circuit protection
Overhead protection
BATTERY CHARGER
Charge Characteristic
Maximum Charging Current 160A 140A 100A 120A
Temperature compensation With BTS-01 or BSP 500/1200
Power Factor Correction (PFC) EN 61000-3-2
GENERAL DATA XTH 3000-12 XTH 5000-24 XTH 6000 48 XTH 8000 48
Input Voltage Range 150 to 265VAC
Input frequency 45 to 65Hz
Input current max. (transfer relay)/
Output current max. 50A / 56A 50A/80A
Transfer time <15ms
Multifunction contacts 2 independent contacts (potential free 3 points, 16 A AC, 5A DC)
Weight 34kg 40kg 42kg 46kg
Dimension H x W x L (mm) 230x300x500 230x300x500 230x300x500 230x300x500
Protection index
Conformity
Operating temperature range
Relative humidity in operation
Ventilation
Acoustic level
Warranty
ACCESSORIES
Remote Control RCC-02 or RCC-03 l l l l
Module XCOM-232i l l l l
Bridge XCOM-MS l l l l
Remote Control Module RCM-10 (3m)
Communication Module TCM-01
2 aux. contacts module ARM-02
Cooling Module ECF-01
Battery temp. sensor BTS-01 (3m) l l l l
Communication cable for 3ph
and // CAB-RJ45-8-2 l l l l
Mounting frame X-Connect l l l l
* Adjustable with the RCC-02/-03
** These features are valid only when using the cooling module ECF-01
(1) -01 at the end of the reference indicates 120V/60Hz. Available for all Xtenders except XTH 8000-48
SinetechAdvanced Power Products
2 Samantha Street, Strijdom Park, Randburg, Johannesburg, 2194Tel: (+27) 11 886-7874 | Fax: (+27) 11 787 0178
[email protected] | www.sinetech.co.za
14/4/08/Ver01
XTH - BI-DIRECTIONAL INVERTER
Pure sine wave 230Vac (+/- 2%)
50Hz / 60Hz +/- 0.05% (crystall controlled)
<2%
Automatic disconnection with 3-time restart attempt
Warning before shut-off - with automatic restart
6 steps: Bulk-Absorption-Floating-Equalization-reduced floating-periodic absorption
Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03
Ÿ True sine wave voltage
Ÿ Reliable and silent with any kind of load
Ÿ Outstanding overload capabilities
Ÿ Smart-Boost function for assistance to the source
even with difficult loads
Ÿ Automatic reduction of peak loads (power shaving)
Ÿ Multi-stage programmable battery charger with PFC
Ÿ Stand-by level adjustable over a large range
and from a very low threshold
Ÿ Ultra-fast transfer relay
Ÿ Control by digital signal processors (DSP)
Ÿ High efficiency
Ÿ 5 year warranty
FEATURES:
IP20
Directive EMC 2004/108/EC: EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, 62040-2
Low-voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1
-20 - 55°C
95% without condensation
Forced from 55°C
<40dB / <45dB (without / with ventilation)
5 years