xxiii summer schoolfrancesco turco xxiii summer schoolmario tucci, university of firenze matteo...

challenges and opportunities

for INdustrial Engineering



Innovative MAnaGement

XXIII Summer school

Francesco Turco2018, September 12th-14th

Palermo, Italy

XXIII Summer school

Francesco Turco2018, September 12th-14th

Palermo, Italy

Under the auspices of

PROGRAMME

www.summerschool-aidi.itwww.summerschool-aidi.it

challenges and opportunities for INdustrial Engineering



General Chair

Mario Enea, University of Palermo

Program Co-Chairs Giacomo Maria Galante, University of Palermo

Giada La Scalia, University of Palermo

Antonella Certa, University of Palermo

Giuseppe Aiello, University of Palermo

Organising Committee - University of PalermoRosa Micale, (Local Events And Logistics)

Antonio Giallanza, (Local Events And Logistics)

Silvia Carpitella, (Local Events And Logistics)

Concetta Manuela La Fata, (Local Events And Logistics)

Editorial BoardMario Enea, University of Palermo

Sergio Cavalieri, University of Bergamo

Antonio Casimiro Caputo, University of Roma Tre

Giovanni Mummolo, University of Bari

Marco Taisch, Polytechnic of Milano

Maurizio Bevilacqua, University of Marche

Massimo Tronci, University of Roma “La Sapienza”

Emilio Ferrari, University of Bologna

Antonio Rizzi, University of Parma

Mario Tucci, University of Firenze

Matteo Mario Savino, University of Sannio

Marco Perona, University of Brescia

XXIII Summer school

Francesco Turco2018, September 12th-14thPalermo, Italy


Welcome note

Dear Friends and Colleagues,

It is a great pleasure and an honour to extend to you a warm in-vitation to attend the XXIII edition of the Summer School “Fran-cesco Turco”, to be held September 12 – 14, 2018 at the Grand Hotel et des Palmes, in Palermo, Italy.

The 2018 Edition of the Summer School is jointly organized by the Department of Industrial and Digital Innovation, University of Palermo, and the AIDI association. The Summer School pro-

motes interaction and cooperation among researchers coming from different universities and enhancing, at once, the sense of belonging to the SSD ING-IND/17 (Industrial Systems Engineering).

The special theme of this edition is “Innovative Management: Challenges and opportunities for industrial engineering”. We welcome the opportunity to further expand the ranks of the world’s effective global research by sharing our studies and expertise on your behalf.

The social program highlighting our Sicilian cuisine, unique culture and arts, combined with the breath-taking natural beauty and pre- and post congress meetings and tours will underscore the role of Palermo as one of the world’s most popular tourist destinations.

Finally, we would like to thank each of you for attending the Summer School and bringing your expertise and kindness to our gathering and we hope you will take a little extra time to enjoy the spectacular and unique beauty of our region.

With best wishes,

Mario Enea and Giacomo Galante

9,00 – Registration & Welcome Greetings, Prof. Mario Enea - Summer School Director

9,30 – Scientific Sessions PART 1

Industrial plant design and energy management and performance measures in industrial system engineering SALA CAMINO Chairman: Prof. Giuseppe Tomasoni University of Brescia, Italy

115 - Hafeez1 F., Shafiq1Hassan Sarfraz1 M., Hoa NTX, Mennano M., Savino MM., Mixed Model Assembly Line Design in a Lean implemented Manufacturing Industry

140 - Demartini M., Tonelli F., Quality management in the industry 4.0 era

128 - Pilati F., Bortolini M., Gamberi M., Margelli S., Economic optimization of the design and operation of polygeneration energy systems by genetic algorithms

85 - Bertolini M., Neroni M., Romagnoli G., A new heuristic algorithm to improve the design of a vertical storage system

102- Zangaro F., Battini D., Calzavara M., Part-feeding Models and Techniques in an Automotive Environment: A Literature Review and Future Research Agenda

99 - Bonetti D., Adrodegari F., Saccani N., Assessing customer centricity: a new framework for manufacturing companies

Industrial Safety, Risk and Maintenance Engineering and strategies for lean process SALA WAGNER Chairman: Prof. Matteo Savino University of Sannio, Italy

109 - Sala R., Zambetti M., Pirola F., Pinto R., How to select a suitable machine learning algorithm: a feature-based, scope-oriented selection framework

82 - Stefana E., Marciano F., Cocca P., Alberti M., Confined space risk management in steel industry: towards the adoption of Industry 4.0 technologies

122 - De Merich D., Gnoni MG., Malorgio B., Micheli GJL., Piga G., Rosso A., Sala G., Tornese F., A new model proposal for occupational health and safety management in small and medium enterprises

103 - Longo F., Nicoletti L., Padovano A., Workplace safety and emergency procedures (re)design: a human workload assessment through virtual reality

106 - Zambetti M., Sala R., Russo D., Pezzotta G., Pinto R., A patent review on machine learning techniques and applications: depicting main players, relations and technology landscapes

Sustainability, decision support systems

SALA PALMETTA Chairman: Prof.Sara Perotti Polytechnic of Milan, Italy

79 - Micale R., Giallanza A., Li Puma G., La Scalia G., ELECTRE TRI-based approach for sorting projects portfolio: focus on the European strategy

91 - Bressanelli G., Perona M., Saccani N., Towards the circular supply chain: a literature review of challenges

131- Butturi M.A., Lolli F., Balugani E., Gamberini R., Rimini B., Distributed renewable energy

generation: a critical review based on the three pillars of sustainability

148 - Baglio M., Dallari F., Garagiola E., Perotti S., A model for assessing the quality and functionality of logistics buildings

141 - Rondini A., Lagorio A., Pezzotta G., Pinto R., Comparison between the TOPSIS method and a “Condorcet winner” based voting method for the evaluation and selection of new services

97- Fani V., Bindi B., Bandinelli R., Rinaldi R., Optimizing production performances with simulation: a case study in the fashion Industry

158 - Loro C., Mangiaracina R., Perego A., Tumino A., The Italian Fashion Supply Chain: a model to identify the suitable technology between Fashion Houses and Third Parties Laboratories

11,00 – Coffee break

11,30 Scientific sessions PART 2:

Industrial plant design and energy management and performance measures in industrial system engineering

SALA CAMINO

Chairman: Prof. Giuseppe Tomasoni University of Brescia, Italy

117 - Volpi A., Bottani E., Montanari R., A simulation approach to traditional job shop manufacturing systems

121 - Bianchini A., Guzzini A., Pellegrini M., Saccani C., Gas smart metering in Italy: state of the art and analysis of potentials and technical issues

12 september 12 septemberXXIII Summer school Francesco Turco XXIII Summer school Francesco Turco

152 - Marchi B., Zanoni S., Pasetti M., Zavanella L.E., Ferretti I., A queuing theory decision support model and discrete event simulations for the smart charging of electric vehicles

157 - Bettoni L. , Zavanella L., Pedretti F., Reducing Energy Costs in IT Infrastructure: the Case Study of the University of Brescia

80 - Frau C. , Maggio E., Poggi F., Melis E., Orrù PF., Analysis of a smart system of thermal energy generation coupled with a geothermal probe

149 - Santolamazza A., Cesarotti V., Introna V., Evaluation of Machine Learning techniques to enact energy consumption control of Compressed Air Generation in production plants

Industrial Safety, Risk and Maintenance Engineering and strategies for lean process SALA WAGNER Chairman: Prof. Matteo Savino University of Sannio, Italy

87 - Ciano M.P., Pozzi R., Rossi T., How to assess the degree of leanness: a preliminary proposal

107 - Anastasi S., Elia, V., Monica L., Gnoni, M.G., Parisi S., Coordinating inspection activities at hazardous equipment through an IOT platform

118 - Calabrese F., Casto A., Regattieri A., Piana F., Components monitoring and intelligent diagnosis tools for Prognostic Health Management approach

150 - Zipoli, T., BahooToroody, A., De Carlo, F., Dynamic Human Reliability Assessment enhanced with Bayesian Networks; a Comparison with Classical Approaches

94 - Cagliano A.C., Grimaldi S., Schenone M., Proposing a new framework for lean warehousing: first experimental validations

Sustainability, decision support systems SALA PALMETTA Chairman: Prof. Sara Perotti Polytechnic of Milan, Italy

124 - Cannas V.G., Ciccullo F., Cigolini R., Pero M., Ruci M., Factors influencing the implementation of new sustainable logistic models within dairy supply chains: insights from a multiple stages case study research

145 - Bianchini A., Pellegrini M., Rossi J., Saccani C., A new productive model of circular economy enhanced by digital transformation in the Fourth Industrial Revolution - An integrated framework and real case studies

120 - Rosa P., Sassanelli C., Terzi S., Circular Economy in action: uncovering the relation between Circular Business Models and their expected benefits

123 - Nardin G., Ciotti G., Dal Magro F., Meneghetti A., Simeoni P., Waste heat recovery in the steel industry: better internal use or external integration?

92 - Pinna C., Cattaneo L., Sassanelli C., Rossi M., Pestarino A., Vignati A, Dell’Era C., Terzi S., Leveraging European SMEs and Start-Ups competitiveness through design

154 - Sullivan B.P., Rossi M. , Sassanelli C., Luglietti R., Ramundo L., Terzi S., LINCOLN Integrated Solution Supporting the Design of Specialized Connected Vessels

13,00 – Lunch

12 september 12 septemberXXIII Summer school Francesco Turco XXIII Summer school Francesco Turco

14,15 – Scientific sessions PART 1:

Logistic & supply chain management SALA CAMINO

Chairman: Prof. Marco Bortolini University of Bologna, Italy

132 - Baruffaldi G., Accorsi R., Botti L., Galizia F.G., Tufano A., Perishable products supply chains: Research trends over the last decade

84 – Pero M., Micheli G., Aiolfi S., Pacchiani D., Triadic relationships in New Product Development: contingent factors and implications for performance

90 - Giuffrida M., Mangiaracina R., Perego, A., Tumino, A., Entering China via Cross Border E-Commerce: logistics solutions and related challenges

98 - Prataviera L.B., Perotti S., Tappia E., Fumero F., Integrating fiscal issues in global distribution network design

105 - Lucci G., Schiraldi M.M., Vincenzi M., Choosing the Minimum Order Size in Large-Scale Retail Trade Distribution

86 - Carlin, A., Mangano G., Tanda A., Zenezini, G., The impact of City Logistics on Retailers inventory management: an exploratory analysis

Industrial service, ergonomics and healthcare engineering SALA PALMETTA Chairman: Prof. Giorgio Mossa Polytechnic of Bari, Italy

119 - Bindi B., Fani V., Bandinelli R., Massa G., Ciaccio G., eBIZ 4.0 new step to digitize the fashion supply chain: preliminary results

130 - Cimini C., Rondini A., Pezzotta G., Pinto R., Smart manufacturing as an enabler of servitization: a framework for the business transformation towards a smart service ecosystem

101 - Zuin S., Sgarbossa F., Calzavara M., Persona A., State of the art on design and management of material handling systems

83 - Mazzuto G., Bevilacqua M., Ciarapica F.E., Antomarioni S., Drug Warehouse Optimization: an Approach Based on Response Surface Method

137 - Tufano A., Accorsi R., Gallo A., Manzini R., Time and space efficiency in storage systems: a diagnostic framework

78 - Pozzi R., Strozzi F., How assembly systems are adopting the technologies of I40: a preliminary landscape

Project and operation management SALA WAGNER

Chairman: Prof. Alberto De Marco Polytechnic of Torino, Italy

139 - Baffo I., Salvatori S., Introna V., Esdra A, Cesarotti V., An application of Project Management techniques for the estimation of processing times in industrial projects with a high degree of innovation

93 - Kumala Sriwana I., Menanno M., Arkeman Y., Marimin, Shafiq M., Awais Islam M., Supply improvement of cacao agro-industry using an Interpretive Structural Modelling (ISM): a case study of cacao supply from Indonesia

155 - De Marco A., Bozzo R., Rafele C., Guida R., Grimaldi S., Measuring the Effectiveness of Risk Assessment in Project Portfolio Management

108 – Lagorio A., Zenezini G., Mangano G., Pinto R., A Systematic Review of Innovative

Technologies adopted in Logistics Management

95 – Varisco M., Johnsson C., Schiraldi MM., Proposal for a classification of ISO22400 KPIs for Manufacturing Operations Management

114 - Bertolini M., Bottani E., Esposito G., Rizzi A., Romagnoli G., Company staff intention to use RFID technology in fashion and apparel retail sector: a UTAUT based-model


16,15 – Scientific sessions PART 2:

Logistic & supply chain management SALA CAMINO

Chairman: Prof. Marco Bortolini University of Bologna, Italy

133 - Gallo A., Accorsi R., Baruffaldi G., Ferrari E., Manzini R. , A taxonomy framework to manage perishable products in cold chains

104 - Bottani E., Casella G., Mannino F., Montanari, R., Vignali, G., Scenario analysis for food waste recovery in logistic distribution

111 - Mangiaracina R., Perego A., Siragusa C., Tumino A., An innovative multivendor warehouse in e- grocery: an activity based model to assess different configurations

112 - Mangiaracina R., Perego A., Seghezzi A., Tumino A., Optimizing store-based picking in the e- grocery: a model to assess costs and benefits

96 - D’Urso D., Chiacchio F., Compagno L., Lolli F., Balugani E., Economic order quantity and storage assignment policies

12 september 13-14 septemberXXIII Summer school Francesco Turco XXIII Summer school Francesco Turco

Industrial service, ergonomics and healthcare engineering SALA PALMETTA

Chairman: Prof. Giorgio Mossa Polytechnic of Bari, Italy

113 - De Carlo F., Navicelli A., Tucci M., Technical analysis of the impact of smart meters’ battery useful life on the management of a service company

81 - Paschou T., Rapaccini M., Adrodegari F., Saccani N., Competences in digital servitization: a new framework

88 - Zheng T., Ardolino M., Bacchetti A., Perona M., Industry 4.0 revolution: state-of-the-art of the Italian manufacturing context

135- Abdous M-A., Finco S., Visentin V., Workload evaluation of industrial work: existing methods and practical applications

160 - Conforti D., Guido R., Mirabelli G., Solina V., A two-phase integrated approach for elective surgery and bed management problems

136 - Facchini F., Digiesi S., Mossa G., Mummolo G., Evaluating the I4.0 transformation readiness of agri-food companies: from factories to ‘smart’ factories

Project and operation management SALA WAGNER

Chairman: Prof. Alberto De Marco Polytechnic of Torino, Italy

127 - D’Orazio L., Schiraldi M.M., Varisco M., KPIs in Operations Management: extending the ISO22400 standard scope

125 - Conforti D., Guido R., Mirabelli G., Solina V., A decision support service for hospital bed assignment

153 - Costantino F., Di Gravio G., Shaban A., Tronci M., Coordinating of multi-echelon supply chains through the generalized (R, S) policy

144 - Cesarotti V., Gubinelli S., Introna V., A joint application of Design for Six Sigma and Taguchi-Response Surface Method in Supply Chain Process Design

89 - Antomarioni S., Bevilacqua M., Ciarapica F. E., Mazzuto G., Oil spills in European and North-American pipelines: an association rule-based analysis

17,15 – Conference Closing

18,00 - Bus departure to Villa Palagonia

20,30 – Dinner at Castello di Solanto

13 SEPtEMbER

9,00 – Registration

09,30 – 1° Didactic session:”Implementing Best Project Management Practices to Plant Turnaround and Systems Overhauls Projects”

Prof. Adolfo Crespo Márquez, School of Engineering of the University of SevilleSALA CAMINO


11,30 – 2° Didactic session: “Project/process management - how to take into account information on activities, products, resources and risks”

Prof. François Marmier École nationale supérieure des mines d’Albi-CarmauxSALA CAMINO

12,30- Team working game explanation (Sala Camino) – Prof.ssa Micale

13,00 – Lunch

14,30 - Team Working and Gaming (SALA

PALMETTA)/ Summer meeting (SALA CAMINO)


16,15 – Team Working and Gaming (SALA PALMETTA) / Summer meeting (SALA CAMINO)

20,00 – Bus departure

20,30 – Social dinner A’Cala & Best TEAM GAME Awards

14 SEPtEMbER

9,00 – Plenary lecture:“Le attività di AIDI nell’ambito della normazione nazionale ed internazionale sui temi dell’automazione industriale ed Industry 4.0.”

Prof. Max Schiraldi Università degli studi di Roma “Tor Vergata”SALA CAMINO

10,00 – Plenary lecture:”Valutazione e ranking universitari” Prof. Gino Ferretti Università di Parma SALA CAMINO


11,00 – Round Table:Partnership tra Università e Imprese strumento di sviluppo socio economico nazionale SALA CAMINO Modera: Maurizio Scaglione - ilsicilia.it Partecipano:

Sergio Cavalieri - Associazione Italiana Docenti Impianti IndustrialiMauro Bregolato - Robert Bosch s.p.a.Mario Enea - Università degli Studi di PalermoMassimo Debenedetti - Fincantieri s.p.a.Ferdinando Morace - Liberty Lines s.p.a.Alessandro Pelosini - Fincantieri s.p.a.Giuseppe Russello - Omer s.p.a.Angelo Stella - Bosch Rexroth s.p.a.Salvatore Torrisi - Agroindustry Advanced Technologies s.p.a.

12,45 – Questions and discussion13,15 – Lunch

14,30 – AIDI general meeting (SALA CAMINO)15,45 – Coffee break

16,15 – AIDI general meeting (SALA CAMINO)17,00 – Summer school closing and handover - Prof. Mario Enea

Si ringraziano

GOLD SPONSOR

SILVER SPONSOR

per il prezioso contributo alla realizzazione delle edizioni XXIIa e XXIIIa della Summer School “Francesco Turco” – Industrial Systems Engineering

Under the auspices of

Partner and Organization




XXIII Summer school







XXIII Summer school



xxiii summer schoolfrancesco turco xxiii summer schoolmario tucci, university of firenze matteo...

Documents