y charlie brown - mmu...of his insecurities, outside interference, or plain bad luck. the model, as...
TRANSCRIPT
reddadsteve
Charlie Brown - MMU
VIEW IN BROWSER
updated 15. 8. 2019 | published 15. 8. 2019
PRUSAPRINTERS
Summary
MMU version of Charlie Brown, from the comic strip Peanuts by CharlesSchulz.
Personality-wise, he is gentle, insecure, and lovable. Charlie Brownpossesses significant determination and hope, but frequently fails becauseof his insecurities, outside interference, or plain bad luck.
The model, as presented is 71mm tall.
This MMU model was derived from my non-MMU model (reworked for aclean MMU print):
https://www.prusaprinters.org/prints/233-charlie-brown
Enjoy! And don't forget to post your makes.
Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: Doesn't MatterSupports: Yes Resolution: 0.2mm Infill: 20%
Filament: various pla various Notes:
Instructions
The 3MF file contains all the parameters I used for the Prusa Slicer.
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
792.3 KBupdated 15. 8. 2019
2.7 MBupdated 15. 8. 2019
1.4 MBupdated 15. 8. 2019
1.6 MBupdated 15. 8. 2019
1.9 MBupdated 15. 8. 2019
I've also included all the STL files in case you use a different slicer.
The supplied files are for the smallest recommended size of the model.The model can be sized up without issue, but I would not recommendsizing it down any further.
Toys & Games > Action Figures & Statues
peanuts comics cartoon boy
3_brown.stl
1_skin.stl
4_black.stl
2_yellow.stl
charlie.3mf
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition