y enclosure for pimoroni inky what(epaper/eink/ epd) and ......updated 2. 11. 2019 176.1 kb updated...
TRANSCRIPT
Summary
Currently there are two covers types
• slim• large Please if you printed this give me a shout by uploading picture
of your print ;) Modeled in Fusio360, printed with Prusa MK3 https://youtu.be/WHZQte4B1yA Order on Shapeways:
• Enclosure with slim cover • Slim Cover• Large Cover Not standard fit. The wiring will be very tide in order to
achieve slim profile. Example wiring without soldering wires direct onboard https://youtu.be/q5ER7cTRDVo Todos:
• design cover with even more space • design cover for usage with pHAT
Gadgets > Computers
rpizero raspberrypizerow raspberrypizero pimoroni
inkywhat enclosure
printminion
Enclosure forpimoroni InkywHAT(ePaper/eInk/EPD) and raspberrypi zero
VIEW IN BROWSER
updated 2. 11. 2019 | published 2. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
450.7 KBupdated 2. 11. 2019
176.1 KBupdated 2. 11. 2019
185.4 KBupdated 2. 11. 2019
Category: DIY Print Settings
Printer Brand: Prusa Supports: Yes Resolution: 0.2 Infill: 5%
Notes:
Not standard fit. The wiring will be very tide in order to achieve slimprofile.Check out the "large" cover if "slim" does not fit to your needs
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
printminion_inkywhat_frame_v41-body.stl
printminion_inkywhat_frame_cover_slim-v1.stl
printminion_inkywhat_frame_cover_large-v7.stl
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition