y flip up face shield plus brow protection · 2020. 4. 28. · i created this remix of the prusa...
TRANSCRIPT
Summary
I created this remix of the Prusa Face Shield RC3 for a family member. Shewanted the convenience of a face shield that she can flip out of her facewhen she doesn't need it. But she wanted the extra protection provided bythe Design That Matters design upper shield.
I swiped the brow shield from the "RC3 + DtM Face Shield Combination"model by IBG 3D Printing Hub, then pasted and resized it to fit onto the"Rotating Prusa Face Shield - US Version" model by Cavy.
Credit to the original designs below:
www.prusaprinters.org/prints/27950-prusa-face-shield-us-versionwww.prusaprinters.org/prints/30081-rotating-prusa-face-shield-us-versionwww.prusaprinters.org/prints/29446-rc3-dtm-face-shield-combination
Healthcare > Accessibility
shield ppe faceshield facemask covid19
The file contains all 3 printable pieces needed to assemble the mask. I alsoadded some custom support blocks that may not be necessary, but I didn'twant to risk my 3 1/2 hour print.
B BrianHanifin
Flip Up Face Shieldplus BrowProtection
VIEW IN BROWSER
updated 28. 4. 2020 | published 28. 4. 2020
• •
•
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
413.0 KBupdated 28. 4. 2020
1.5 MBupdated 28. 4. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
flip-up-face-shield-plus-brow-protection.3mf
flip-up-face-shield-plus-brow-protection.stl