y hand crank motorizer - media.prusaprinters.org€¦ · electric yarn ball winder. it took a few...

3
Summary This couples an inexpensive power screwdriver to a hand cranked gadget. In this specic case, it turns a hand cranked yarn ball winder into an electric yarn ball winder. It took a few drafts to get it right. Modeled in OpenSCAD, so the model is a simple text le you can edit to suit your hand crank. The steel shank is a at head screwdriver bit left over from another drill set, Hobby & Makers > Tools screwdriver adapter Category: Hobby Print Settings Printer: Monoprice Mini select Rafts: Yes Supports: Yes Resolution: .1mm W WoodenDavid Hand crank motorizer VIEW IN BROWSER updated 9. 11. 2019 | published 9. 11. 2019 3D MODEL ONLY

Upload: others

Post on 24-Sep-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Y Hand crank motorizer - media.prusaprinters.org€¦ · electric yarn ball winder. It took a few drafts to get it right. Modeled in OpenSCAD, so the model is a simple text file

Summary

This couples an inexpensive power screwdriver to a hand cranked gadget.In this specific case, it turns a hand cranked yarn ball winder into anelectric yarn ball winder.

It took a few drafts to get it right.

Modeled in OpenSCAD, so the model is a simple text file you can edit tosuit your hand crank.

The steel shank is a flat head screwdriver bit left over from another drillset,

Hobby & Makers > Tools

screwdriver adapter

Category: Hobby Print Settings

Printer: Monoprice Mini select

Rafts: Yes

Supports: Yes

Resolution: .1mm

W WoodenDavid

Hand crankmotorizer

VIEW IN BROWSER

updated 9. 11. 2019 | published 9. 11. 2019

3D M

ODEL

ONLY

Page 2: Y Hand crank motorizer - media.prusaprinters.org€¦ · electric yarn ball winder. It took a few drafts to get it right. Modeled in OpenSCAD, so the model is a simple text file

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

2.9 KBupdated 9. 11. 2019

163.6 KBupdated 9. 11. 2019

Infill: 100%

Notes:

I printed this in PLA at 190°.

It's printed at right angles to the orientation you'd expect to get thestrongest grain. (When I tried printing this with the cone pointing up, ittwisted apart in under a minute.)

Post-Printing

super glue in the screw driver bit.

With the print in its printed orientation, the screwdriver bit fits in so theblade is vertical.

Custom Section

The tool in action.

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

winder.scad

winder.stl

Page 3: Y Hand crank motorizer - media.prusaprinters.org€¦ · electric yarn ball winder. It took a few drafts to get it right. Modeled in OpenSCAD, so the model is a simple text file

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition