y longboard wall mount · wallmount skateboard longboarding longboard electricskateboard print in...
TRANSCRIPT
Summary
I needed some wall hooks for my longboards and wanted to design themmyself. So this is it, nothing to complicated but functional and not toboring. I guess...
There are some decent single wheel mounts in the web, which means thatyou have to mount them perfectly leveled. The use less material, which isgreat, but the water level bubble being my archenemy made thesedesigns not usable for me. ;-)
I also added a plate which can be mounted at the place, where the lowertruck and therefore wheels hit the wall. We want to keep everything clean,don't we?
This design was executed in ThinkerCad, simple as that. You are free touse this design for remixing. https://www.tinkercad.com/things/782QWCnDpS2
Sports & Outdoor > Outdoor Sports
wallmount skateboard longboarding longboard
electricskateboard
Print in the orientation provided, no supports necessary. The pad can beprinted with an infill of 20% or less, but don't tighten the screws too much
WeirdCan
Longboard WallMount
VIEW IN BROWSER
updated 24. 3. 2020 | published 24. 3. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
76.0 KBupdated 24. 3. 2020
213.9 KBupdated 24. 3. 2020
with this little infill. It definitely looks better with a high amount of infill orat least thick outer walls.
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
longboard_wall_mount.stl
longboard_wall_mount_-_mud_pad.stl