y pop-up sensor module (adafruit sht31d temperature and ......ace krystal pop-up sensor module...
TRANSCRIPT
AcE Krystal
Pop-up SensorModule (AdafruitSHT31D temperatureand humidity)
VIEW IN BROWSER
updated 17. 8. 2019 | published 17. 8. 2019
PRUSAPRINTERS
Summary
I needed a sensor mount for my Enclosure Ambient Control project.
https://www.youtube.com/watch?v=DbXVjOoNJw4&feature=youtu.be
I had a few requirements :
It needed to sit close to the controller PCB so wiring is easy.It needed to have good air circulationIt needed to be ridged enough for transport without breakingWhen moving/folding, it may not cause wire fatigue (movement spread over larger length of It may not heighten the IKEA LACK table by more then 1CM when transporting (else it would Look awesome and learn some new tricks in the process if possible (don't go for the easy w
This module is designed for the Adafruit SHT31D witch have nice accuracyand 2 i2c channels so you can wire 2 of them in your project. It uses 5x M2bolts for both the sensor and the anchor.
Prints best in PLA or NGEN. Can also be printed in PET with support, but isa pain to remove. I added a special PET version with manual support thatyou can leave on, doesn't look nice, but it works and you don't see it whenmounted ;).
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
116.4 KBupdated 17. 8. 2019
246.0 KBupdated 17. 8. 2019
911.9 KBupdated 17. 8. 2019
2.0 MBupdated 17. 8. 2019
4.2 MBupdated 17. 8. 2019
Other parts of this project can be found here : https://www.thingiverse.com/thing:3747281
3D Printers > 3D Printers - Upgrades
sensormount sht31 sensor mechanicaltoy ikealack
ikeaenclosure enclosure adafruit
antenna-cylinder-anker.stl
flens-ring-sensor.stl
sensor-cage.stl
antenna-cylinder-frame.stl
antenna-cylinder-frame_supported.stl
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition