y074027_rhinofrontbumperblack_instructions
DESCRIPTION
YAMAHA RHINO Front Bumper b) Tighten hardware to 50 ft/lbs. c) Reinstall OEM Skid Plate with OEM bolts. Use Item #2 washers and Item #3 nuts. 4. Maintenance: Check all fasteners and re-torque when required. 6. Customer service: For further information call Pro Armor at 951-270-0559 OEM Mounting points 5. Care and Cleaning: Clean using a soft cloth with soap and water. To avoid injury to your self or damage to the ATV, read these instructions carefully before installation. Y074027TRANSCRIPT
INSTRUCTIONSYAMAHA RHINO
Front Bumper
To avoid injury to your self or damage to the ATV, read these instructions carefully before installation.
1. Parts List:Item Part Name Description Qty
1 Front Bumper Steel 12 Washer M6 23 Nylock Nut M6 2
2. Preparation:a) Lock parking brake on vehicle, making sure vehicle will not move while installing your
Rear Bumperb) Remove OEM Front skid plate and OEM Front Bumper. Retain all hardware.
3. Installation:a) Install new Front Bumper reusing the (4) OEM Bumper mounting points and hardware as
shown.
OEM Mounting points
b) Tighten hardware to 50 ft/lbs.c) Reinstall OEM Skid Plate with OEM bolts. Use Item #2 washers and Item #3 nuts.
4. Maintenance: Check all fasteners and re-torque when required.
5. Care and Cleaning: Clean using a soft cloth with soap and water.
6. Customer service: For further information call Pro Armor at 951-270-0559 Y074027