yates bird - us dental depot · pdf filesides of solder joint while freeing one hand. ......

YATES BIRD&

CATALOG OF DENTAL LAB PRODUCTS

TO ORDER CALL: 800.662.5021 or 312.226.2412 OR FAX: 312.226.2480

Hot StopAsbestos-free heat-absorbingcompound

Hold parts firmly in place while soldering andprotect porcelain and acrylic from heat. Hot Stopshapes like putty and will not burn, crack, melt,swell, or interrupt alignment. Economical becauseit can be used again and again!

42851 Hot Stop, 8 oz.

Foot Control SwitchFree Both Hands!Speeds up and simplifies production. Position solderingelectrodes while current is off. Then activate the current withthe foot switch and complete the soldering. It’s instantaneous.

Use it to operate other 115 volt AC appliances “hands free!”

42710 Foot Control Switch

42810 Soldering Machine Complete with Foot Switch and Model Holder

42820 Soldering Machine with Foot Switch

42830 Soldering Machine with Model Holder

42840 Soldering Machine Only

220v units available

Electric Soldering MachineAn invaluable time and labor saver plusexceptional laboratory profit generator.Standard equipment for any dental lab.

Make repairs and additions instantly without theinconvenience, delay and danger of using a torch.Seven heat settings accommodate virtually everysoldering need. Provides a quick esthetic andfunctional repair that can save a costly remake.

Quick heat has many advantages: • Solder clasps, bars and rests on the model

without distortion • Repair partials without removing acrylic or teeth• Solder without investing joints• Fabricate and solder retainers, space maintainers

and other orthodontic wire appliances• Repair pin holes in crowns• Solder precision attachments• Assemble and repair ceramic metal bridges

Electric Soldering Machines come complete withcarbon and ground cords, Hot Stop, brass tip,Miraflux, 5-Star Solder, 5/16" carbon, 3/16" carbon and adaptor.

Model HolderAdjustable clamp and rest hold modelin place. Ball and socket jointpermits tilting to any position.

42890 Model Holder

New Product!

Yates & Bird

2

ELECTRIC SOLDERING MACHINE& ACCESSORIES

LEADING THEINDUSTRY FOROVER 50 YEARS!

Soldering Accessories42852 Adaptor for 3/16" Carbon & 6 Points42853 Carbon Electrode Cord42854 Ground Electrode Cord42858 Double Brass Tip for Ground Cord42859 Brass Tip for Ground Cord42860 Carbon Points 2" x 5/16" (6)42861 Carbon Points 3" x 5/16" (6)42863 Carbon Points 2" x 3/16" (6)42866 Brass Receptacle for Comfort-Cool

Carbon Electrode Cord

[email protected] www.yates-motloid.com

Comfort-Cool CarbonElectrode CordWork comfortably on all soldering jobs.The double shell construction andaluminum finned heat dissipaterseliminate the heat build-up previouslycommon in the handles after heavy use.

Easy-hold grip has the proper balancefor full control precision work.

42855 Comfort-Cool Carbon Electrode

Perfec-FloSolderThe perfect solder for allelectric solderingoperations. Triplethickness reduceselectrical resistanceand provides uniformheat distribution. Will notoverheat, ball up or oxidize. This freeflowing solder’s excellentcapillary action guarantees deeppenetration, precise control, andexceptionally high strength. Ideal for orthodonticapplications, attachments and all partial repairs. Suppliedin convenient, easy-to-use triple thick flat strips.

42875 Perfec-Flo Solder, 6 DWT

Catalog of Dental Lab Products

3

Double Clip Ground Electrode AdaptorSpecial twin alligator-clip attachment improves distribution of heat on both

sides of solder joint while freeing one hand. Absolutely necessary forsuccessful ceramic metal soldering, highly recommended for all operations.

42857 Double Clip Ground Electrode Adaptor

Cerami-Flo FluxCerami-Flo’s excellent capillary attraction protects ceramicmetal surfaces from oxidation and provides the penetrationrequired for successful solder joints.

42887 Cerami-Flo Flux, 20 grams

Cerami-Flo SolderSpecifically formulated for the electric solderingof ceramic crown and bridge metals.Possesses excellent flow characteristics and strength. Supplied in convenient1/16" rods.

42877 Cerami-Flo Solder,10 DWT

MirafluxA superior paste fluxfor all solderingoperations.

Miraflux flows at 900°F. Itprotects metal fromoxidation while heating andalso assists in the flow ofthe solder. This easy-to-usecreamy paste form isadaptable to all solderingoperations on gold, silver and stainless steel. Alsorecommended for use with blowpipe or Bunsen burner. Packed in 2 oz. jars.

42880 Miraflux, 2 oz.

“5-Star” SolderAn economical general purposesolder for chromium alloy,stainless steel and gold. Strong,quick-flowing rapid build-up,always uniform. In yellow-goldcolor. Alloyed from high quality silverand non-precious metals. Especially indicated for usewhere the soldered areas are to be covered by denturematerial.

42870 “5 Star” Solder, 1 oz.

Heavy-Duty GroundElectrode CordAllows direct attachment to largeappliances or to a holding fixturefor high heat operations. Solidcopper clamp facilitates one-handsoldering and provides the bestpossible current conduction.

42856 Heavy-Duty GroundElectrode

New Product!

Full feature, heavy-duty, one-time-purchase,yet compact, functional, easy-to-use andmaintenance-free.

Ideal for ortho labs and offices, commerciallabs, and any lab wanting instant results.Invaluable and economical – saves time,labor and space. An exceptional profitgenerator.

Designed in consultation with leadingorthodontists and orthodontic labtechnicians. Use as a welder for wire,brackets or bands, as a stress reliever forwire or an electric soldering machine forpartials and C&B.

This versatile machine does it all, from low-heat soldering to high heat welding. It’s themost economical full-feature qualityorthodontic welder on the market.

INCREASED POWER: 200% more weldingpower from a larger transformer makes forquicker and cleaner welds, improved remotewelding capability and a wider range ofpower output options.

NEW: Half-inch platform cutoutaccommodates larger models, closer to thewelding jaws.

NEW: Convenient drill chuck holds pre-soldered electrodes.

NEW: Additional thermal protective overloadswitch for transformer.

• Ergonomic controls• All-metal construction - durable and

attractive• 3 heat settings• 9 pulse time settings• 12 welding tip combinations• Remote weld/solder leads with tips• Brass posts for annealing and stress

relieving

Complete with a foot switch, solder, flux,non-asbestos heat sink, brass tip andcarbon point for soldering, copper tips, brassposts, dual-purpose cords for soldering andremote welding and two copper electrodesfor welding.

Built and guaranteed to last by Yates & Bird,veteran manufacturer of soldering andwelding products.

Welding Current: up to 200 amps (approx.)Weight: 25 lbs (11.5 kg)Dimensions: 10” x 10.5” x 7”Voltage: 110vAC/60hz or 220vAC/50hzDraws (fused): 7 amps (110v) or 3 amps(220v)

42750 Ortho Welder, 110v

42752 Ortho Welder, 220v

Replacement Parts

42755 Footswitch

42756 Wire Gauge Drill Chuck

42782 Copper Welding Tips for Jaws (7)

42782-A Copper Welding Tips for Cords (2)

42783 Remote Cords (2)

ORTHO WELDER

Annealing Wire

Detail of Jaws

Soldering with Pre-Soldered Electrode

The “All In One Workhorse”THREE MACHINES IN ONE:• ortho welder• electric solderer• wire annealer

Yates & Bird

4 TO ORDER CALL: 800.662.5021 or 312.226.2412 OR FAX: 312.226.2480



Gold PlaterGive the look and propertiesof gold without the high cost.

Electroplate a long-lasting 20K goldveneer on all precious, semi-preciousand non-precious metals (includingchrome cobalt and stainless steel.)

WHAT CAN BE PLATED?

Partial dentures, gingival collars,crowns, facings, clasps, copings,dummy pontics, saddles,backings, buccal arms,retention posts, Marylandbridges and more. The GoldPlater selectively plates metal,so it won’t plate, distort ordiscolor acrylic or porcelain.

WHY GOLD PLATE?

Many patient-related andfunctional benefits.• Isolate and seal the non-

precious with a gold veneer – gold is very biocompatible

• Eliminate tissue sensitivity problems,galvanic reactions, nickel leaching,and gingival collar discoloration(greening)

• Improve esthetics – appliances lookbeautiful in gold

• Enhance restorations• Re-create gold inlays on

crowns and bridges

PROFIT OPPORTUNITY

Material cost to plate appliance with aheavy wear coat is less than $0.45 persquare inch. Charge customers, orconsider it a "value-added" service toretain customers.

IS IT DIFFICULT OR TIMECONSUMING?

Plating is quick and easy. Apply 5 to 7micro-inches per minute; most exposedapplications get a ten-minute “heavy-wear” coat (just under 2 microns) – notenough to affect the fit or finish.• Unique automatic timer shuts off when

desired plating time is reached, so youdon’t have to sit and watch it plate

• Specially designed plating bar allowsautomatic "gang" plating: up to 4crowns or other items simultaneously

IS THE MACHINE SAFE?

The Gold Plater uses safe, low voltage.It's short-circuitproof and shockproof.

IS IT COMPLETE AND READY-TO-USE?

The Gold Plater comes complete with allnecessary accessories and supplies,four solution containers and covers,stainless steel brush plating tool,“Gang” Plating Bar, special Electro-Clean Powder and 12 ounces of “20K”Gold Solution.

Attractive and functional Gold PlaterStand is an available option.

42910 Gold Plater, Complete Unit

42920 Gold Plater, Complete Unit with Stand


Gold Plater StandGray electrostatically powder-coatedsteel stand sits three inches above yourbench or shelf. Die-cut holes allow easyorganization of plating containers, cordsand unit.

42940 Gold Plater Stand

"20K" Gold SolutionHOW LONG WILL IT LAST?

Each replacement bottle of gold solutionwill plate up to 200 square inches ofsurface area metal at the "heavy-wear"coat. If only a “flash” coat is required(under acrylic or subgingival) the solutionwill plate even more surface area.

42971 Gold Plater "20K" GoldSolution, 12 oz.

Electro-Clean PowderExtra strength cleanser designed forthorough pre-plating electrolytic cleaning.Removes all oil and other debris toguarantee perfect gold plating.

42980 Electro-Clean Powder, 16 oz.

Gold Plater Accessories42990 "Gang" Plating Bar

42960 Solution Containers, set of 4

42953 Dip (red) Electrode Cord Set

42954 Brush/Clean (black) ElectrodeCord Set

42976 Silver Plating Solution, 12 oz.

42950 Tin Plater Accessory Kit

GOLD PLATER & ACCESSORIES

Yates & Bird


“All-Season” WaxThe foremost baseplate waxthroughout the world

• Only waxes in their purest form are used

• The color of “All-Season”exactly simulates fleshtones (so important forpatient’s peace of mindduring the try-in)

• Working qualities areexceptional

• Ideal softeningtemperature of 150˚F

47015 “All-Season” Wax, 3" x 6" Sheets, 5 lb.

"Sticktite" Wax Specially formulated, strong and fast-setting –offers a superb rigid bond.Very popular forcrown and bridge work.

• Clean melting and burnout assured• No distortion - won't give or bend• Highly tenacious

Ideal for attaching patterns tosprue assemblies, joiningimpression parts, joining brokendentures, construction of bridgesand bent wire work.

Available in convenient chunks. Yellow only.

47610 “Sticktite” Wax, Chunks, 1 lb.

47615 “Sticktite” Wax, Chunks, 5 lb.

Rijform Bite RimsUnique pink ridge-formedbite rim saves time, waxand labor.

Highest-quality ingredientsinsure the utmost accuracyin bite registration. Sticks are easily shaped toconform to the dental arch.

No waste. Shape to the model, cut off and use exactlywhat you need.

47415 Rijform Bite Rims, Sticks, 9” x 1/2" x 1/2", 4 lb.

“Set-Rite” Set-Up WaxHigh purity, pliable whenwarm, maintains shapewhen cool.

The ultimate for set-ups and try-ins, a technician’s dream.Excellent workability and longworking time. "Set-Rite" holdsteeth perfectly in position, remainingsufficiently plastic for setting up and manipulatingteeth until chilled. Sets hard without brittleness.

"Set-Rite" will not flake in the hands when heatedand rolled: carves easily and smoothly without drag.Mold always boils clean – no pigment remains.

47001 “Set-Rite” Wax, 3" x 6" Sheets, 1 lb.

47005 “Set-Rite” Wax, 3" x 6" Sheets, 5 lb.

Red RefinedWaxTough,flexible, softand resilientEasy to work with,an ideal all-purpose wax forboxingimpressions,bite registrationsand general waxing-up techniques. Working qualities offerdependable uniformity. Once set, not rigid. Low softeningtemperature of 140°F.

47315 Red Refined Wax, 3" x 6" Sheets, 5 lb. box

Mini Wax GunCompact micro-electronic

wax gun is avaluable time-saver, makes

fastening jobs quickand easy. Thermo-

plastic wax dispenses cleanly and evenly eliminating theneed for sticky wax or other messy adhesives – then peelsoff cleanly when cool. Retractable front stand keeps toolupright when not in use. Comes complete with 12 clearwax sticks.

47660 Mini Wax Gun, Complete

47661 2" x 5/16" Replacement Wax Sticks, 48

We make specialty waxes for many industries. Contact our expertsabout custom blends, colors or bulk quantities for your needs. Jewelry?Hearing Aids? Precision Investments? Sculpture? Other?

This famous wax is used by a leadinglecturing doctor as an impressionmaterial for lower dentures.



WAXES & WAX ACCESSORIES

“All-Purpose”Blue Castable Inlay WaxSmooth working wax is idealfor partials, inlays, crowns andbridges.Exceptional durability - cast in extremelythin sections, it resists deformation fromrepeated handling. Guaranteed distortion-proof, this wax becomes so thoroughlyhard that even under unexpected abuse itbreaks before it bends! Carvesbeautifully, without chipping or dragging.Burns out cleanly with no residue.

Available in convenient chunks. Blue only.

47520 Chunks, 50 lb.

47521 Chunks, 1 lb.

WaxsolWax solvent for plastic or porcelain teeth.

48511 Waxsol, Pint

48512 Waxsol, Quart

48513 Waxsol, Gallon

Boxing Wax StripsSoft, tacky red wax is ideal for boxing-inimpressions. Strips will adhere tothemselves or most surfaces, without theuse of heat. Boxing Strips are 1/16" thick x 11/2" wide x 12" long.

47921 Boxing Wax Strips, 1 lb.

Utility WaxEasily shaped, soft rope utility wax iswell-suited for building up and post-damming purposes. Since the ropes arepliable at room temperature, they canalso be used to fill sprue bases andsmall imperfections in pattern surfaces.Each rope is 3/16" diameter x 12" long.

47911 Red Rope Utility Wax, 1 lb.

47912 White Rope Utility Wax, 1 lb.

YB Dipping WaxReadily shaped and carvedresists warping and breakage.Quality tough, durable green dippingwax produces well adapted, eventhickness, one-dip wax copings.Formulated to provide clean burnoutand optimal hydroscopic expansion.Economical, convenient, quick melting,3/8" diameter flakes allow you to useonly what you need.

Melting temperature 71-76°C (160-169°F).

47705 YB Dipping Wax, 8 oz.

Compatible with virtually all wax pots,and all the latest coping techniques

Boxing and Utility Waxes work even bettertogether! Position Utility Wax below the

peripheral border of the impression.

Digital Wax PotPrecise digital temperature display; easy"raise" and "lower" temperature buttons • Versatile Temperature Range:

50˚-115˚C (± 1˚C) / 122˚-239˚F • Efficient: quickly reaches and maintains desired

temperature • Accurate: makes perfect copings every time• Compact: just 41/2" x 41/2" x 2"• 110/220v operation with switchable adapter• inner dimensions 3/4" deep, 13/4" diameter

47715 Digital Wax Pot, 110/220v

Yates & Bird


Carbide Fissure BursMade of solid carbide for excellence incutting (rather than shaping) these fissureburs offer super efficiency and long life.May be used at either high or low speedand are suitable for both acrylic and metal.Ten styles available to accommodate a wide variety of uses. (11/2" overall length.)*

*Illustrations oversized; actual sizes listed.

Hd Dia. Hd Lgth.

50001 Large Cylinder 3/32" 1/2"

50002 Small Cylinder 1/16" 3/8"

50003 Large Barrel 3/32" 1/2"

50004 Small Barrel 1/16" 3/8"

50005 Round 3/32" 3/32"

50006 Egg 3/32" 1/8"

50007 Miter 3/32" 1/4"

50008 Tapered 3/32" 1/4"

50009 Flame 3/32" 1/8"

50010 Inverted Cone 3/32" 1/8"

Carbide DrillsHigh quality carbide drills guaranteeaccurate dowel pin and sleeve place-ment. Compatible with Pindex and otherdie fabricating systems. Drills measure6 mm head length, 3 mm shankdiameter and 34.5 mm overall length.Packaged 3 per set.

50050 Carbide Drills, Set of 3

Carbide Lab BursFor trimming, carving and finishing acrylicdentures and chrome-cobalt cases, thesecarbide burs provide the ultimate intoughness and durability. Precisionground flutes are razor sharp and assureresistance to gumming and clogging. (Allexcept Inverted Cone feature cross-cut“chipbreaker” blades.)

Recommended operating speed: 5000rpm. Nine standard shapes, all on 3/32" x11/2" steel shanks.

50021 Barrel

50022 Cone

50023 Egg

50024 Taper

50025 Flame

50026 Cylinder

50027 Inverted Cone

50028 Pear

50029 Round

Brass Dowel PinsMedium size brass dowel pins,universal type. Packed 1000per package.

46210 Brass Dowel Pins,1000

Pin-Pal Dowel End ProtectorsEasy-access pins, no time-consuming waxes Flexible rubber dowel end protectors simplify removal ofyour preparation – no mess or damage. Simply slip Pin-Palprotectors onto all your dowel pins and save time andeffort. No searching for dowel pin tips, no drilling out stone.

Pin-Pals give a visual signal when grinding - to avoid contactbetween dowel pin and grinding apparatus

Packed 1000 per package.

46220 Pin-Pal Dowel End Protectors, 1000

BURS & DRILLS



PlastikarversSave Time And Money WhenTrimming AcrylicsAvoid burs clogging and gumming at highspeeds on acrylics. Plastikarvers arefast, smooth and accurate, and moreeconomical than carbides.

• Heavy-duty tungsten steel lasts andlasts

• Nitrite coating resists heat • "Razor sharp" cutting edges last

indefinitely • Strong shanks won’t bend • Scientifically calibrated tips give high

speed performance against acrylics • "Chip Pitcher" flutes automatically

clean themselves – no more gumming

Also great for podiatry, prosthetics,orthotics, ear molds, model making,hobby work and more.

Five shapes for your needs:

41830 Flame 1, Dozen

41840 Flame 2, Dozen

41850 Round, Dozen

41860 Bud, Dozen

41870 Pear, Dozen

41810 1 Dozen Assortment: 3 ea.Flame 1, Flame 2; 2 ea. Round, Bud, Pear

41820 Six-Set – one of each shape andextra Flame 2

“Super” PlastikarverSpecially designed Plastikarver with oversized, large radius cone head, approximately 3/8"diameter x 5/8" long, makes short work of all your heaviestacrylic trimming jobs. Has all the desirable properties andcharacteristics of our well established Plastikarvers.

41899 “Super” Plastikarver

ACRYLIC TRIMMING BURS

FG-HP Converter• Standardize on friction grip burs and

diamonds • Avoid stocking both FG and HP• Eliminate the high cost of HP diamonds

68000 FG-HP Converter

MOTLOID BUFFING & BURNISHING COMPOUNDSHighlight your craftsmanship with the finest products available for all your buffing, burnishing andpolishing requirements. Save time and effort while producing a beautiful lustre.

Moldent Buffing AgentRed for acrylic and goldEliminates fine scratches and gives the highest lustre to acrylic dentures, goldand other precious metals.

41940 Moldent Buffing Agent

Dual-Lustre Two-Purpose Polishing MediumWhite-Grey for partials Finishes and polishes the resin and restores the original lustre to chrome and goldpartials. Ideal time saver for crown and bridge work, plastic or porcelain.

41943 Dual-Lustre

Chrometal BurnishingAgent #1Black – pre-buff for chromiumQuickly, easily removes scratches fromchromium alloys and precious metals, andprepares surfaces for final shine.

41941 Chrometal #1

Chrometal BurnishingAgent #2Green – high-shine forchromiumProduces an unequalled beautiful lustreon all metals, especially chrome-cobaltand gold.

41942 Chrometal #2

Use Chrometal #1 & Chrometal #2together for best results!

Yates & Bird


Aker’s KnifeReplaceable cone socket knife and spoon(stainless steel).

43310 Aker’s Knife Complete

43311 Blade Replacement

43312 Spoon Replacement

43313 Handle Replacement

Single End PickFor carving wax or chiseling dentures.Made of light weight aluminum. 5" long,tapered handle. Collet opens from 0" to1/8". Complete with drill rod pick blade.

43410 Pick with Blade

43411 Blade Only, Left, Dozen

43412 Blade Only, Right, Dozen

Casting Rings and Crucible FormersOur heavy duty, 16 gauge, one-piece casting rings are manufactured from the finestquality Surgical Grade 18/8 stainless steel. Companion crucible sprue former basesare produced from quality reinforced rubber to assure long life.

46701 46702 46703 46704 4670511/4" x 11/2" 11/2" x 11/2" 13/4" x 11/2" 13/4" x 13/4" 2" x 2"

46706 46707 46708 46708 4670911/4" Ø Base 11/2" Ø Base 13/4" Ø Base 13/4" Ø Base 2" Ø Base

Wax Carvers and Spatulas

49004 LeCron Carver

49005 No. 1 Ward Carver

49006 No. 2 Ward Carver

49007 Roach Carver

49008 No. 7 Wax Spatula

49009 No. 31 Gritman Wax Spatula

49010 No. 71/2 Wax Spatula

49011 No. 24 Cement Spatula, Flexible Blade

49012 No. 24A Cement Spatula, Rigid Blade

TweezersNo. 17 Flagg pliers (stainless steel).

43710 Tweezers

Y+B Safety SolventCleanerNon-flammable, water-solublesolvent removes wax, adhesivesand other difficult materialsinstantly.Leaves no residue when rinsed with water.Will not harm teeth or other dentalmaterials, benches, furniture, carpet orclothing.

Economical ready-to-use solvent is freefrom chlorinated solvents and CFCs and isfaster to use and yields a more thoroughdewaxing. Ideal for dewaxing teeth andmolds, cleaning and degreasing tools,benches, clothing and other surfaces.

Also removes tar, oil, grease, ink, contactcement, adhesive, tape, cement and muchmore.

48521 Y+B Safety Solvent, 8 oz.

48522 Y+B Safety Solvent, Quart

48523 Y+B Safety Solvent, Gallon

SpatulaFor pastes and plaster. Flexible stainlesssteel blade 4" x 3/4". Rosewood handle.

43610 Spatula



PlastipacFor trial packingPlastic film separates the cast from the denture, andis so thin that the surface produced is unsurpassedin accuracy. It stretches when pulled, yet leaves nowrinkles, folds or creases. Plastipac eliminatestinfoiling and lacquering the cast (and the subsequentcleaning).

45515 Plastipac, 5" x 5" (1000)

45520 Plastipac, 4" x 4" (1000)

PlasticlearFor final packing - strong, wrinkle free "wet and stretch" 0.0015" stretches to 0.0005" for use. Will not fold intodenture. No checking, totally non-reactive to acrylics. Noadhesion, peels off the plastic case in one piece.Excellent results with clear as well as pigmented acrylic.Ideal for all types of plastic dentures, for cleft palatecases and for corrective bite in orthodontia cases.

Eliminates the need for tinfoiling, even in clear palatecases. Absolutely no cloudiness. No lacquering orcleaning necessary

Packed 500 sheets to a box.

45420 Plasticlear, 4" x 4" (500)

FoilexIdeal substitute for tinfoil. Easy to use fool-proofformula. Red tinted liquid.

45710 Foilex, 16 oz.

45720 Foilex, Gallon

SEPARATING MEDIAInsulating &DuplicatingPasteThe cushion-coating forbetter, easier-finisheddentures

Elasto-Vest is acoating to protect,safeguard and help inthe "break-out"devesting of youracrylicdenturework.

Use it on all acrylic, porcelain and composite teeth.

Cleaning off your freshly processed denture usedto involve a tough break-out, picking awaystone/plaster from the gingival tooth area and toolong in the ultrasonic....now with Elasto-Vest ...savetime, money and hassle!

46520 Elasto-Vest, 20 oz. Kit with Activator

46521 Elasto-Vest, 300 gm. squeeze bottleKit with Activator

ELASTO-VEST

Yates & Bird


Compact VibratorLow cost investment vibrator is ideal for dental office or laboratory use. Thishigh quality unit features a wide, cast aluminum base for better stability, anexceptionally quiet motor, a 4" diameter work platform and a three speedswitch. Overall dimensions are 41/2" x 41/2" x 4" high.

42615 Compact Vibrator


Heavy Duty VibratorTotal rheostat control! “Full power”does the largest flask,“barelyperceptible” doesn’t damage fragilepatterns and impressions Electromagnetic design has many advantages: • High-speed-action drive units – 3600 vibrations

per minute liberate bubbles and voids in moldsfor solid, dense results

• Outstanding durability – not motor-driven, socontinuous use does not cause heat build upor damage

• No moving parts – no lubrication, minimalparts replacement

Self-contained, compact and only 19 pounds –easily portable

Fully enclosed aluminum case – rubber topremoves for cleaning

Large 81/2 x 51/2 surface fits several cases

42610 Heavy Duty Vibrator


42612 Replacement Rubber Top

42613 Replacement On/Off Switch

42619 Replacement Rheostat

42630 Replacement Metal Top

VIBRATORS

Universal PlateStrengthenersPre-formed stainlesssteel platestrengtheners arestamped with a speciallydesigned raised pattern toensure maximum retention.

46250 Universal PlateStrengtheners, Dozen

Mixing BowlsSuperior quality, flexible rubber mixingbowls provide easy clean-up, just flexand wipe. Available in four sizes.

Diameter Capacity

46751 Small 31/4" 150 cc

46752 Medium 41/4" 350 cc

46753 Large 43/4" 650 cc

46754 X-Large 51/4" 850 cc



WaxironsCast of chromium cobalt alloy.Indestructible in a constant flame. “Must”item for a busy laboratory technician.Working end has both a concave and aconvex surface for easy smoothing,finishing and evening and carrying of wax.Complete set contains one each small andlarge waxiron and two extra handles.

49100 Waxiron, Complete Set

49101 Waxiron, Small with Handle

49102 Waxiron, Large with Handle

49103 Handle Only

Tin PlaterIncrease the retentionstrength of your cements ongold or palladium crowns,bridges and inlays.

Compact unit plates pure tin (.999 fine)to the insides of crowns, bridges,Maryland Bridges and inlays, easily andquickly. The addition of a fine layer oftin significantly increases (up to 250%)the retention of a restoration whenusing glass ionomer cements and Bis-GMA resins, like Panavia, Superbondand New Bond. Tin Plating isrecommended for precious and semi-precious metals.

Just one step! Simply clip the item tobe plated with the alligator clip andimmerse it in the tin plating solution fortwo minutes. The resulting coat of tinis perfectly uniform over the entiremetal surface, and there is no pen orrod to hold.

Made of stainless steel, 7" x 31/2" x41/2". 115vAC. Includes regulatedpower source, plastic container, solidtin anode, tin solution and easyinstructions.

42951 Tin Plater Complete

42995 Replacement Tin Anode

42974 Tin Plating Solution, 12 oz.

MEASURING DEVICES

Dial CaliperHighly accurate to 0.05 mm.Measuring range 0-10 mm. Madeof best quality stainless steel.

46235 Dial Caliper

Precision CalipersPrecision stainless steel instruments. Easy-to-read 1/10 millimeter,dual-sided calibrations guarantee accurate thicknessmeasurements. Models available for metal or wax.

46230 Precision Caliper for Metal

46231 Precision Caliper for Wax

Yates & Bird

TO ORDER CALL: 800.662.5021 or 312.226.2412 OR FAX: 312.226.2480

DENTISTRY ITEMS

14

Rapid-Glaze DiamondPorcelain Polishing PasteStop wasting time and moneyre-glazing porcelain appliancesafter minor adjustments

Adjustments areno longerexpensive ortime consumingbecause RapidGlaze eliminatesthe need for re-glazing afteradjustments!

Rapid Glazegives you thesame brillianceas the originalporcelain.

• Polycrystalline structure of millions ofmicroscopic diamonds (one micron)

• Effortlessly cuts and polishes to amirror-like glazed finish in seconds

• Non-toxic, water soluble, safe and clean• Simple – chairside on a prophy cup or

chamois wheel, in the lab on a feltwheel or cone

Labs • save time and money by notre-firing

• eliminate the chance ofdefects or mistakes

Dentists • save chair time• eliminate multiple

appointments

It also works beautifully on all metals andmicrofilled composites.

Rapid Glaze is packaged in convenient,easy-to-use syringe applicators.

69302 Rapid-Glaze, 2 gram syringe

69305 Rapid-Glaze, 5 gram syringe

Ultrasonic CleanerCleans any object that can beimmersed in liquid. Thisversatile unit is ideal for bothdental office and laboratoryuse. Compact enough (5"cube overall size) forconvenient chairsideuse, but large enoughwith its 31/2"diameter x 2" deeptank toaccommodate

full dentures andmany other laboratory items. Model 42generates 42,000 high-intensity cleaningpulses every second that instantly clean anydental diamond, bur, instrument or dentalappliance.

42342 Ultrasonic Cleaner, Model 42

Tofflemire RetainersStainless Steel Tofflemire typeretainers can be used with anywidth band. Locks securely,releases instantly, andadjusts easily.

51001 Tofflemire Retainer,Universal

51002 Tofflemire Retainer CA (adult)

51003 Tofflemire Retainer CA (child)

Tofflemire Matrix BandsStainless Steel Tofflemire type matrix bands available intwo thicknesses, .0015 gauge and .0020 gauge, and infour styles per thickness, #1, #2, #3, and #13. Onedozen per package.

Mylar Matrix StripsClear mylar matrix strips, 4" x 1/2" x.002" thick, 1000 per package.

51011 Mylar Matrix Strips, 1000

.0015" .0020"

51101 51201

51102 51202

51103 51203

51113 51213


[email protected] www.yates-motloid.com 15

Acrylics . . . . . . . . . . . . . back cover

Acrylic Finishing Burs. . . . . . . . . . . 9

Aker’s Knife . . . . . . . . . . . . . . . . 10

Buffing and Burnishing Agents . . . . 9

Burs, Fissure (Carbide) . . . . . . . . . 8

Burs, Lab (Carbide) . . . . . . . . . . . . 8

Calipers. . . . . . . . . . . . . . . . . . . 13

Carbon Points. . . . . . . . . . . . . . . . 2

Carvers, Wax . . . . . . . . . . . . . . . 10

Casting Rings . . . . . . . . . . . . . . . 10

Cerami-Flo Flux . . . . . . . . . . . . . . . 3

Cerami-Flo Solder . . . . . . . . . . . . . 3

Comfort-Cool Electrode Cord . . . . . . 3

Convertor, FG-HP. . . . . . . . . . . . . . 9

Dial Caliper . . . . . . . . . . . . . . . . 13

Diamond Polishing Paste . . . . . . . 14

Dip Wax Pot . . . . . . . . . . . . . . . . . 7

Dowel Pins. . . . . . . . . . . . . . . . . . 8

Drills (Carbide) . . . . . . . . . . . . . . . 8

Duplicating Paste . . . . . . . . . . . . 11

Elasto-Vest, Insulating Paste . . . . . 11

Electric Soldering Machine . . . . . . . 2

Electroplater. . . . . . . . . . . . . . . . . 5

Fissure Burs (Carbide) . . . . . . . . . . 8

Flux. . . . . . . . . . . . . . . . . . . . . . . 3

Foilex . . . . . . . . . . . . . . . . . . . . 11

Foot Control Switch . . . . . . . . . . . . 2

Gold Plater. . . . . . . . . . . . . . . . . . 5

Heat Shield . . . . . . . . . . . . . . . . . 2

Insulating Paste . . . . . . . . . . . . . 11

Knife, Aker’s . . . . . . . . . . . . . . . 10

Lab Burs (Carbide) . . . . . . . . . . . . 8

Matrix Retainers and Bands . . . . . 14

Miraflux . . . . . . . . . . . . . . . . . . . . 3

Mixing Bowls . . . . . . . . . . . . . . . 12

Model Holder . . . . . . . . . . . . . . . . 2

Mylar Strips . . . . . . . . . . . . . . . . 14

Ortho Welder . . . . . . . . . . . . . . . . 4

Perfec-Flo Flux . . . . . . . . . . . . . . . 3

Perfec-Flo Solder. . . . . . . . . . . . . . 3

Pick, Single End . . . . . . . . . . . . . 10

Pin Pals. . . . . . . . . . . . . . . . . . . . 8

Plasticlear . . . . . . . . . . . . . . . . . 11

Plastikarvers . . . . . . . . . . . . . . . . 9

Plastipac . . . . . . . . . . . . . . . . . . 11

Plate Strengtheners, Universal . . . 12

Porcelain Polishing Paste . . . . . . . 14

Separating Media . . . . . . . . . . . . 11

Single End Pick . . . . . . . . . . . . . . 10

Solder . . . . . . . . . . . . . . . . . . . . . 3

Soldering Machine. . . . . . . . . . . . . 2

Spatula . . . . . . . . . . . . . . . . . . . 10

Spatulas, Wax. . . . . . . . . . . . . . . 10

Tinfoil Substitute . . . . . . . . . . . . . 11

Tin Plater . . . . . . . . . . . . . . . . . . 13

Tofflemire Retainers and Bands. . . 14

Tweezers . . . . . . . . . . . . . . . . . . 10

Ultrasonic Cleaner . . . . . . . . . . . . 14

Vibrators . . . . . . . . . . . . . . . . . . 12

Wax Carvers . . . . . . . . . . . . . . . 10

Wax Gun . . . . . . . . . . . . . . . . . . . 6

Wax Pot . . . . . . . . . . . . . . . . . . . . 7

Wax Spatulas . . . . . . . . . . . . . . . 10

Waxes . . . . . . . . . . . . . . . . . . . 6, 7

Waxirons . . . . . . . . . . . . . . . . . . 13

Waxsol . . . . . . . . . . . . . . . . . . . . 7

Welder. . . . . . . . . . . . . . . . . . . . . 4

Y+B Safety Solvent Cleaner . . . . . 10

PRODUCT INDEX

ORDERING INFORMATIONDealers: Order by catalog number. Please see accompanying Price List. NOTE TO NEW CUSTOMERS: To expedite shipment of your initialorder, please include three credit references.

Laboratories: Order by catalog number. Please see accompanying Price List. If you encounter any problems in obtaining our productsfrom your dental supply dealer, please contact us for assistance.

NOTE: Please specify unit quantities when units are available as standard multiples; i.e., order “two dozen”, “three boxes of 100”,“four 5-pound boxes”, etc., and NOT “24”, “300”, “20 pounds”, etc.

ORDER FORM

PAYMENT METHOD

Name

Company

Address

City State Zip

Phone

Fax

eMail

VISA Master Card Discover Card Number: Exp. Date:

Signature:

Qty. Item Number/Description

TOTAL

Price Extention

Request a catalog from our sister companyMotloid, a leader in high quality acrylics: self andheat cure, tooth, denture, repair, tray and ortho!

See our always-changing web page for current specials and new products!www.yates-motloid.com

inches to centimeters X 2.52ounces to grams X 28F to C subtract 32 then X 5/9DWT to grams X 1.5ounces to milliliters X 30grams to ounces X 0.035

microinches to millimeters X 0.000025microns to millimeters X 0.001pounds to grams X 454pints to liters X 0.47quarts to liters X 0.95gallons to liters X 3.8

Conversion to Metric?(note, some numbers are rounded)

To convert... (where “X” = multiply by)

Coldpac Tooth AcrylicThe perfect Temporary Crown and Bridge Material. For true

tooth shades on veneers, jacketcrowns and bridges, both dentists

and laboratories have found thisgrade ideal. Proper densenessinsures desired hardness,fracture resistance and excellentworkability. Monomer is cross-linked and color fast.

Coldpac is considered by manyleading lecturing prosthodontists

and post-graduate schools to be thefinest TC&B material available.

Coldpac Tooth Acrylic propertiesallow the creation of tooth surfaces

that are both esthetically attractiveand functionally durable. Available in convenient kits

as well as individual Nu-Hue and Vita Shades.

Powder available in 1, 2, 4, 8 or 16 ounces.

Liquid available in 1, 2, 4, 8, 16 or 32 ounces.

Dental Office Kit contains eight 1 oz. powders and two 1 oz. liquids

Dental Lab Kit contains eight 2 oz. powders and two 2 oz. liquids

Larger, or custom-designed kits available on request

Yates & Bird

TO ORDER CALL: 800.662.5021 or 312.226.2412 OR FAX: [email protected] www.yates-motloid.com

YATES BIRD& 300 N. Elizabeth St.Chicago, IL 60607

Coldpac Ortho ResinPremium quality self-cure low-flow resin is ideal fororthodontic appliances andretainers. Versatile material iswell suited for pour, pack ordusting technique.

Powder available in highclarity clear and pink. Liquidavailable in clear, translucentpink and translucent blue.

Powder available in 4 oz.,16 oz. and 6 lbs.

Liquid available in 4 oz.,8 oz. and 32 oz.

Kits available: 4 oz. powder/4 oz. liquid,

16 oz. powder/8 oz. liquid,6 pounds powder/1-1/2 quarts liquid

Brighter colors, like blues, greens, purples, reds, etc. availablefor custom bulk orders.

Coldpac Repair Acrylic for DenturesFlash SetA superior all-purpose, cold-cure acrylic for all kinds ofrepairs replacing brokenteeth, mending crackedand broken dentures,adding teeth or clasps topartials, relining, rebasingand post-damming.

Crosslinking adds adimension to themolecular structure,making this acrylic stongerthan ever, and craze andshrink resistant. Compatible with “pour” technique.

Coldpac Repair “Flash” set quickly forms a true chemical bondwith all acrylic and co-polymer dentre resin materials. Aircuring removes possiblity of warping through heating.Availablein the following shades: Plain (light pink, clear); Granular(orange-pink); Fibered (light, medium).

Powder available in 16 oz., 32 oz. and 6 lbs.

Liquid available in 8 oz., 16 oz. and 32 oz.

Kits available:16 oz. powder/8 oz. liquid32 oz. powder/16 oz. liquid6 pounds powder/1-1/2 quarts liquid

MOTLOID ACRYLICS

59 60 61 62 65 66 67 68 69 77 81 87 – – –B1 A1 B2 A2 D3 A3 B3 – C2 B4 A3.5 A4 C3 C4 D4Also Light Incisal, Dark Incisal and Clear

Miracryl Plus Denture Base AcrylicThe low-cost acrylic denturebase. Supplied with cross-linked heat-cure monomer.

Available in the followingshades: Plain (clear, pink);Granular (orange-pink); Fibered(mylon dark, mylon light).

Powder available in 16 oz., 32 oz. and 6 lbs.

Liquid available in 8 oz., 16 oz. and 32 oz.

Kits available:16 oz. powder/8 oz. liquid, 32 oz. powder/16 oz. liquid, 6 pounds powder/1-1/2 quarts liquid

yates bird - us dental depot · pdf filesides of solder joint while freeing one hand. ......

Documents