yb4400 product guide imperial diniso
TRANSCRIPT
-
7/31/2019 YB4400 Product Guide Imperial DINISO
1/36
Features
YB4409: 7,7 t (8.5 USt) three-section boomwith 7,6 m (25 t 2 in) tip height
YB4409XL: 7,7 t (8.5 USt) three-section boomwith 10,2 m (33 t 6 in) tip height
YB4409-2: 8,1 t (9 USt) three-section boomwith 11,6 m (38 t 2 in) tip height
YB4411: 9,5 t (10.5 USt) three-section boomwith 11,6 m (38 t 2 in) tip height
1,8 m (6 t) xed extension (YB4409/XL) and3,6 m (12 t) ofsettable swingaway extension(YB4409-2 and YB4411)
63,4 kW (85 bhp) Cummins diesel engine or59,6 kW (80 bhp) GM EFI dual uel engine
Grove YB4400 SeriesProduct Guide
-
7/31/2019 YB4400 Product Guide Imperial DINISO
2/36
Features
BoomStandard:6,4 m (21 t) main boom on the YB4409.9,1 m (30 t) main boom on the YB4409XL.
10, 0 m (32 t 10 in) main boom on theYB4409-2 and YB4411.Optional: Manual ourth main boom sectionadds 3,0 m (10 t) additional main boom lengthon YB4409 and YB4409XL only.
SteeringStandard: our-wheel coordinated steerStandard: two-wheel, our-wheel, andcrab steer with sel alignment (YB4411)Optional: two-wheel, our-wheel, andcrab steer (standard on YB4409-2)
CabStandard: Open air cab shell withoverhead saety glass.Optional:Closed cab with splithinged door, heater/deroster, and all
window glass.
Pivoting boom noseStandard on the YB4409-2 and YB4411 theexclusive pivoting boom nose allows operatorsto decrease the overall boom head depth andoperate in more confned areas.
EngineStandard: Cummins QSB 3.3 Lturbo-charged diesel rated at63,4 kW (85 bhp) at 2600 rpm.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
3/36
Contents
Specications 4
YB4409 (dimensions/turning radius/range diagram/load chart) 7
YB4409XL (dimensions/turning radius/range diagram/load chart) 11
YB4409-2 (dimensions/turning radius/range diagram/load chart) 17
YB4411 (dimensions/turning radius/range diagram/load chart) 21YB4409 DIN/ISO (range diagram/load chart) 25
YB4409XL DIN/ISO (range diagram/load chart) 27
YB4409-2 DIN/ISO (range diagram/load chart) 29
YB4411 DIN/ISO (range diagram/load chart) 31Symbols glossary 33
-
7/31/2019 YB4400 Product Guide Imperial DINISO
4/36
4
Speciications
Superstructure
Boom
YB4409: 2,9 m 6,5 m (9 t 8 in 21 t 2 in) three-section ull power boom.Maximum tip height: 7,6 m (25 t 2 in)
YB4409XL: 3,8 m 9,2 m (12 t 8 in 30 t 2 in)three- section ull power boom.Maximum tip height: 10,2 m (33 t 6 in)
YB4409-2 and YB4411: 4,2 m 10,0 m (13 t 10 in 32 t 10 in) three-section ull power boom.
Maximum tip height: 11,6 m (38 t 2 in)
*Optional boom
*Boom extension
Boom nose
YB4409 and YB4409XL: Manual ourth main boomly section adds 3,0 m (10 t) additional boom length.
YB4409 and YB4409XL: 1,8 m (6 t) ixed pin onextension
YB4409-2 and YB4411: 3,6 m (12 t) osettableextension3,6 m - 5,4 m (12 t- 18 t) telescopicosettable extension
YB4409 / XL: Single sheave non-pivoting
YB4409-2 and YB4411: Single sheave, three-position(0, + 30, + 80) pivoting boom nose or minimizinghead space requirements. Lowers head height. 0,26 m(10.5 in) when nose is pivoted ully orward.
Boom elevation
Single double acting hydraulic cylinder with integralholding valve.Elevation: 0 to 60 or theYB4409 and YB4409XL
0 to 72 or theYB4409-2 and YB4411
Antitwo block device
Standard anti-two block device, when activated,provides an audible warning to the crane operator anddisengages all crane unctions whose movement cancause two-blocking.
Load indicator wireless LSI
A simple, eective, and easy to use load indicatingsystem used in conjunction with the anti-two block
system to assist the operator in eicient operation othe unit within the limits o the load chart. he displaypanel displays the hook load and warns the operator
when a preset load capacity is exceeded. he warning isby a lashing light on the display panel. In conjunction
with the load display panel (receiver), there is a wirelesstransmitter and load sensing pin attached to the boomhead that transmits the hook load to the display panel.
*Load Moment Indicatorhardwired LMI
Digital display o boom angle, boom length, boomradius, capacity, and allows or operator in-put to set
the limits based on load chart. Displays color codedlight bar and audible alarm with unction cutout iload exceeds entered parameters.
(hardwired system)
Swing
Ball bearing swing circle with 360 continuousrotation.Hydraulic driven worm gear and pinion.Maximum speed: 2.05 rpm
Hydraulic system
YB4409 and 4409XL: (2) gear pumps
YB4409-2 andYB4411: Variable displacement pistonpump and piggyback gear pump.
Combined low: 107,9Lpm (28.5 gpm)
Maximum system operating pressure: 3600 psi
YB4409andYB4409XL: Six section valve bankmounted in dash panel with direct mechanical linkageor low eort lever control.
YB4409-2 and YB4411: Six section valve bank chassismounted; operated via dash mounted, pilot pressurehydraulic joysticks.
Return line ilter with ull low by-pass protection andservice indicator.
89 L (23.5 gal) hydraulic reservoir with sight levelgauge and steel side plating to guard against sideimpact damage.
*Denotes optional equipment
-
7/31/2019 YB4400 Product Guide Imperial DINISO
5/36
Grove YB4400 Series 5
Speciications
Superstructure continued
Frame
*Denotes optional equipment
Hoist speciications
YB4409 / XL: Worm drive with counter-balancevalving. Equal speed power up and down.
YB4409-2 andYB4411: Piston motor drive withspring applied/hydraulic released brake.
Drum diameter: YB4409 / XL: 0,24 m (9.69 in) YB4409-2 andYB4411: 0,27 m (10.63 in)
Maximum single line pull:YB4409 / XL: 4854 kg (10,700 lb)
YB4409-2and YB4411: 6350 kg (14,000 lb)
Maximum single line speed:YB4409 / XL: 26,8 m/min (88 pm)
YB4409-2andYB4411: 36,6 m/min (120 pm)
Maximum permissible single line pull: YB4409 / XL: 3855 kg (8500 lb)
(12,7 mm [1/2 inch] Python Ultra XIPS)YB4409-2 and YB4411: 4536 kg (10,000 lb)(14,0 mm [9/16 inch] EEIPS)
Rope length :YB4409 / XL: (three-section boom) 29,6 m (97 t)
(our-section boom) 39,6 m (130 t)YB4409-2andYB4411: 36,6 m (120 t)
Carrier
High strength alloy steel constructed with integraloutrigger housings; ront and rear liting, towing,and tie-down lugs. 38 t2 carrydeck size with6350 kg (14,000 lb) carrying capacity (YB4409/XL /
YB4409-2) and 7711 kg (17,000 lb) carrying capacity(YB4411). Deck coated with anti-skid treatment.
Outriggers
YB4409, YB4409XL and YB4409-2: Front and rearoblique type beams at all our corners with integralholding valves. Outrigger pads orm an integral parto the beam.
YB4411: Hydraulic telescoping beam with obliquetype jack provides extended and down and retractedand down liting capacities. Integral holding valves onboth beam and jack.
Padsize YB4400 Series:
18 cm x 20 cm (7.4 in x 7.8 in)Maximum outrigger pad load: YB4409/XL: 122 psi
YB4411: 387 psi
YB4409-2: 135 psi
Outrigger controls
YB4409-2, YB4409 and YB4409XL: Lever controlslocated on dash panel which operate the beams in
pairs rom side to side.
YB4411: wo switch operation mounted on dashpanel. One -three- position rocker switch to select allbeams/jacks, let beams/jacks only, or right beams/
jacks only. Separate -our- way toggle switch toactivate beams out/in and jacks down/up. Level bubbleindicator located inside operators compartment.
*Independent outrigger controls available as anoption.
Standard engine Tier III
Cummins QSB 3.3 L turbo-charged diesel rated at63,4 kW (85 bhp) at 2600 rpm. Supplied with 110 Vengine block heater and air intake grid heater.
*Optional engine
G.M. 3.0 L EFI dual uel (gasoline / L.P.) rated at59,6 kW (80 bhp) at 2600 rpm.
Operators control station
Frame mounted, open air style control station withcab shell. Includes all crane unctions, driving controls,
and overhead saety glass. Other standard equipmentinclude a durable weather resistant seat with seat belt,hourmeter, sight level bubble, and ire extinguisher.he dash panel includes engine oil pressure gauge,engine water temperature gauge, uel gauge,transmission low oil and high temperature warninglights, low battery warning light, and brake system lowpressure warning light.
*Operators control station enclosed
Includes the standard cab shell with the addition oront, right, and rear glass, a split (two-piece) hingeddoor with sliding glass.
Front windshield wiper and heater and deroster isincluded.
Fuel tank capacity
70 L (18.5 gallon) all steel construction with steel sideplate to guard against side impact.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
6/36
6
Speciications
Electrical system
One 12V maintenance ree battery, 820CCA at 0.Jump start connections.
95 amp alternator.
Drive
4 x 2 Front axle drive with planetary hubs and limitedslip dierential.
Steer
YB4409 / XL: two-wheel, our-wheel steerYB4409-2: two-wheel, our-wheel with crab steerYB4411: two-wheel, our-wheel, and crab steer with
electronic sel alignment.
Transmission
YB4409 / XL and YB4409-2: Synchromesh -our-
speeds orward and reverse with stalk mounted
orward/reverse selector.
YB4411: Powershit -our- speeds orward and
reverse. Stalk mounted shiter on let side o steering
column.
Axles
Front: Carraro planetary drive/steer with internalmulti-wet-disc brakes and limited slip dierential.Rear: Fabricated non-drive steer with disc brakes
Tires
10.00 x 15 pneumatic
Brakes
Hydraulic actuated internal wet-disc service brakes
acting on all our wheels. A dash mounted toggle switchactivates the dry disc parking brake on the transmissionoutput yoke with a dash warning light.
Suspension
Front: Rigid mounted to rame.Rear: Rigid mounted to rame.
Lights
Recessed mounted, includes head, tail, rear work,
stop, and turn signals.
Maximum speed
35,6 km/h (22 mph)
Gradeability theoretical
YB4409 / XLand YB4409-2:57%....no load31%.... 5443 kg (12,000 lb) load
YB4411: 68%....no load
40%.... 9072 kg (20,000 lb) load
Gross vehicle weight G.V.W
YB4409: 6849 kg (15,100 lb)YB4409XL: 7512 kg (16,560 lb)YB4409-2: 7734 kg (17,050 lb)YB4411: 7947 kg (17,520 lb)*All weights with enclosed cab
Miscellaneous standard equipment
Single sheave, Quick Reeve style hook block.;YB4409 / XL: 8,0 t (8.5 USt)YB4409-2: 8,1 t (9 USt)YB4411: 10 t (10.5 USt)Back-up alarm
*Denotes optional equipment
-
7/31/2019 YB4400 Product Guide Imperial DINISO
7/36
Grove YB4400 Series 7
Dimensions
, m' "
, m' ."
, m' ."
, m' "
, m' ."
, m' ."
, m."
, m
' ."
, m' "
, m' ."
, m' "
, m' ."
, m' ."
, m' ."
, m' ."
, m' "
, m' "
, m' ."
On tires, m ."
, m' "
, m' "
, m' "
, m' ."
, m' "
, m' "
, m' ."
, m' ."
, m' "
YB4409
-
7/31/2019 YB4400 Product Guide Imperial DINISO
8/36
8
Turning radius
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
B
Radius
C Radius
A
Radius
D
Radius
E
Radius
YB4409
A B C D E
Twowheel steer 4496 mm
(14 t 9 in)
4737 mm
(15 t 6.5 in)
4636 mm
(15 t 2.5 in)
2718 mm
(8 t 11 in)
5525 mm
(18 t 1.5 in)Fourwheel steer 3048 mm
(10 t 0 in)3645 mm
(11 t 9.5 in)3188 mm
(10 t 5.5 in)1473 mm
(4 t 10 in)3569 mm
(11 t 8.5 in)
-
7/31/2019 YB4400 Product Guide Imperial DINISO
9/36
Grove YB4400 Series 9
Range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409
SECTION
SECTION
'jib
Booma
ndextensionlengthinfeet
Operating radius in eet rom axis o rotation
Heightfromt
hegroundinfeet
-
7/31/2019 YB4400 Product Guide Imperial DINISO
10/36
10
Load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409
1) The rated loads are the maximumlit capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown on outrig-gers do not exceed 85% o actual
tipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm supporting surace.Practical working loads depend onsupporting surace, operating radiusand other actors aecting stability.Hazardous surroundings, climaticconditions, experience o person-nel and proper training must all betaken into account by the operator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered part o the load.See reduction chart.
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
,
ON RUBBER lbON OUTRIGGERS lb
MAINBOOM
JIB
,.
RADIUS
ft
. ,. ,
. ,.
. .
..
..
..
..
,,
,
,,
,
F/R F/R
SECTION BOOM ORSECTION BOOM WITH TH RETRACTED
ON RUBBER lbON OUTRIGGERS lb
.
RADIUS
ft
.
.
.
.
.
.
.
.
.
.
.
.
.
.
F/R F/R
SECTION BOOM WITH TH EXTENDED
*
*
*
*
*
SECTION BOOM
SECTION BOOM
SECTION BOOM OR
WITH TH RETRACTED WITH TH EXTENDED
BOOM
degANGLE
MAIN
JIB STRUCTURAL CAPACITIES lb
* LIMIT RATINGS TO , LB WHEN RD SECTION IS EXTENDED ANY AMOUNT.
4) Ratings on outriggers are oreither outriggers ully extended anddown or ully retracted and down.Ratings or outriggers ullyretracted and down will apply orany intermediate outrigger setting.
5) Ratings on rubber depend ontire capacity, condition o tires andproper infation pressure (100 psi).Loads on rubber may be transportedat a maximum seed o 2.5 mph ona smooth, hard, level surace with
boom retracted to the shortestlength possible and centered overront.
6) For operating radius not shown,use load rating o next larger radius.
7) The maximum combined totalboom and deck load is 12,000 lb. Themaximum deck load only is 14,000lb.
8) Do not induce any external sideloads to boom or jib.
1301286YB
, lbPART
lbPART
RIGGING CHART
FRONT REAR
SIDE
WIRE ROPE: / inch diameter
Min. breaking strength , lb
SIDE
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
lb
lb
lb
lb
N/A
lb
N/A
lb
*
*
*
*
*
-
7/31/2019 YB4400 Product Guide Imperial DINISO
11/36
Grove YB4400 Series 11
Dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409XL
, m' "
, m ' " Retracted, m ' ." Extended
, m' ."
, m' "
, cm."
, m' ."
, m."
, m
' ."
, m' "
, m' "
, m' "
, m' ."
, m' "
, m' ."
, m' ."
, m' ."
, m' ."
, m' ."
, m' ."
, m' " On tires
, m' "
, m' "
, m' ."
, m' " , m
' ", m
' ."
, m' ."
, m' "
, m' "
-
7/31/2019 YB4400 Product Guide Imperial DINISO
12/36
12
Turning radius
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
A B C D E
Twowheel steer 5131 mm(16 t 10 in)
4737 mm(15 t 6.5 in)
4636 mm(15 t 2.5 in)
2718 mm(8 t 11 in)
5525 mm(18 t 1.5 in)
Fourwheel steer 3683 mm(12 t 1 in)
3645 mm(11 t 9.5 in)
3188 mm(10 t 5.5 in)
1473 mm(4 t 10 in)
3569 mm(11 t 8.5 in)
C
Radius
A Radius
B Radius
E
RadiusD
Radius
YB4409XL
-
7/31/2019 YB4400 Product Guide Imperial DINISO
13/36
Grove YB4400 Series 13
Range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Booma
ndextensionlengthin
feet
YB4409XL(Three-section boom)
'JIB
'
"BOOM
'
."
BOOM
'
."B
OOM
'
."B
OOM
WITH
'"JIB
Operating radius in eet rom axis o rotation
Heightfromt
hegroundinfeet
-
7/31/2019 YB4400 Product Guide Imperial DINISO
14/36
14
Range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409XL(Four-section boom)
'JIB
'
"BOOM
'
"BOOM
'"B
OOM
'
"BOOM
'
"BOOM
WITH
'"JIB
Booma
ndextensionlengthinfeet
Operating radius in eet rom axis o rotation
Heightfromt
hegroundinfeet
-
7/31/2019 YB4400 Product Guide Imperial DINISO
15/36
Grove YB4400 Series 15
Load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409XL(Three-section boom)
1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown on
outriggers do not exceed 85% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing on arm, uniorm, supporting surace.Practical working loads dependon supporting surace., operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience opersonnel, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
NOTES:OPERATE WITH JIB BY RADIUS WHEN MAINBOOM IS FULLY EXTENDED AND BY BOOM ANGLEWHEN MAIN BOOM IS PARTIALLY EXTENDED. DONOT EXCEED JIB CAPACITIES AT ANY PARTIALLYEXTENDED BOOM LENGTH.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH. DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
Radiusft
SECTION MAIN BOOMON OUTRIGGERS lb
F/R
,,,,
,,,
Radiusft
SECTION MAIN BOOMON RUBBER lb
F/R
,
,
Radiusft
SECTION MAIN BOOM W/ FT JIB DEPLOYED
ON OUTRIGGERS lb
F/R
.
.
..
..
.
ON RUBBER lb
F/R
LOADEDBOOMANGLEdeg
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 12,000 lb. Themaximum deck load only is 14,000 lb.
8) Do not induce any external sideloads to boom or jib.
80017680
SIDE
SIDE
REARFRONT
REDUCTION CHART
MAIN BLOCK
HOOK & BALL
JIB, ST OWED
JIB, DEPLOYE D
FROMMAIN BOOM
RATINGS
FROMJIB
RATINGS
lb N/A
lb lb
lb N/A
lb lb
RIGGING CHART
PART lb
PART , lb
WIRE ROPE: / inch diameterMinimum breaking strength , lb
-
7/31/2019 YB4400 Product Guide Imperial DINISO
16/36
16
Load chart
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
,
Radiusft
SECTION MAIN BOOMW/ TH RETRACTED
ON OUTRIGGERS lb
F/R
ON RUBBER lb
F/R
Radiusft
SECTION MAIN BOOMW/ TH EXTENDED
ON OUTRIGGERS lb
F/R
.
ON RUBBER lb
F/R
Radiusft
SECTION MAIN BOOM W/ THRETRACTED W/ FT JIB DEPLOYED
ON OUTRIGGERS lb
F/R
.
.
..
..
.
ON RUBBER lb
F/R
LOADEDBOOMANGLEdeg
Radiusft
SECTION MAIN BOOM W/ THEXTENDED W/ FT JIB DEPLOYED
ON OUTRIGGERS lb
F/R
.
.
.
..
ON RUBBER lb
F/R
LOADEDBOOMANGLEdeg
YB4409XL(Four-section boom)
1) The rated loads are the maximumliting capacities as determined byoperating radius only. Any combinationo boom lengths and angles may beused to obtain operating radius. Theoperating radius is the horizontaldistance rom a projection o the axiso rotation to the supporting surace,beore loading, to the center o verticalhoist line or tackle with load applied.
2) The rated loads shown on outriggersdo not exceed 85% o actual tipping.
The rated loads shown on rubber donot exceed 75% o actual tipping. Theseratings are based on reely suspendedloads with the crane leveled, standingon a rm, uniorm, supporting surace.Practical working loads depend onsupporting surace, operating radius,and other actors aecting stability.Hazardous surroundings, climaticconditions, experience o personnel, andproper training must all be taken intoaccount by the operator.
NOTES:OPERATE WITH JIB BY RADIUS WHEN MAINBOOM IS FULLY EXTENDED (WITH 4TH SECTIONEXTENDED OR RETRACTED) AND BY BOOMANGLE WHEN MAIN BOOM IS PARTIALLYEXTENDED. DO NOT EXCEED JIB CAPACITIES ATANY PARTIALLY EXTENDED BOOM LENGTH.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH. DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT INEXCESS OF RATING CHARTS ANDDISREGARD OF INSTRUCTIONS ISDANGEROUS AND VOIDS WARRANTY.
3) The weights o all load handling devicessuch as hooks, hook blocks, slings, etc.,except the hoist rope, shall be consideredas part o the load. See reduction chart.
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at a maximumspeed o
2.5 mph on a smooth, hard, level suracewith boom retracted to the shortestlength possible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boom anddeck load is 12,000 lb. The maximum deckload only is 14,000 lb.
8) Do not induce any external side loads toboom or jib.
80017732
SIDE
SIDE
REARFRONT
REDUCTION CHART
MAIN BLOCK
HOOK & BALL
JIB, S TOWED
JIB, DEPL OYED
FROMMAIN BOOM
RATINGS
FROMJIB
RATINGS
lb N/A
lb lb
lb N/A
lb lb
RIGGING CHART
PART lb
PART lb
WIRE ROPE: / inch diameterMinimum breaking strength , lb
-
7/31/2019 YB4400 Product Guide Imperial DINISO
17/36
Grove YB4400 Series 17
Dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Retracted , m & Extended , mRetracted & Extended
m.
, m
, m , m
, m
, cm.
*, m.
, m.
, m.
* boom headposition can onlybe used with adown haul block
Dimensions are with boom horizontaland the antitwo block bottomed.
See Insert
Dimensions are withboom horizontaland the antitwoblock bottomed.
, m .
, m .
. m .
, m
, m .
, m .
, m .
, m .
, m .
, m .
, m
, m .
, m .
, m
, m
, m .
, m
, m
YB4409-2
-
7/31/2019 YB4400 Product Guide Imperial DINISO
18/36
18
Turning radius
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
A B C D E
Twowheel steer 4674 mm(14 t 4 in)
4737 mm(15 t 6.5 in)
4636 mm(15 t 2.5 in)
2718 mm(8 t 11 in)
5525 mm(18 t 1.5 in)
Fourwheel steer 4267 mm(14 t 0 in)
3645 mm(11 t 9.5 in)
3188 mm(10 t 5.5 in)
1473 mm(4 t 10 in)
3569 mm(11 t 8.5 in)
B
Radius
C
Radius
A
Radius
D
Radius
E
Radius
YB4409-2
-
7/31/2019 YB4400 Product Guide Imperial DINISO
19/36
Grove YB4400 Series 19
Range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4409-2
' Jib ' Jib
boom, m ' "
boom, m ' "
boom, m ' "
with , m ', m ' " boom
osettable boom extension
with , m ' to , m ', m ' " boom
telescopic osettableboom extension
Booma
ndextensionlengthinfeet
Operating radius in eet rom axis o rotation
Heightfromt
hegroundinfe
et
-
7/31/2019 YB4400 Product Guide Imperial DINISO
20/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.20
Load chart
YB4409-2
1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,
beore loading, to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown onoutriggers do not exceed 85% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing on arm, uniorm, supporting surace.Practical working loads dependon supporting surace., operatingradius, and other actors aecting
stability. Hazardous surroundings,climatic conditions, experience opersonnel, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (100 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard, level surace with boom
retracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 12,000 lb. Themaximum deck load only is 14,000 lb.
8) Do not induce any external sideloads to boom or jib.
1303154YB
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OF
INSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
F/R
ON OUTRIGGERS lb ON RUBBERlb
F/R RADIUSft
BOOMRETRACTED
BOOMEXTENDED
ANYBOOM
BOOMRETRACTED
BOOMEXTENDED
ANYBOOM
MAINBOOM
JIB
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
JIB STRUCTURAL CAPACITIES lb
ft JIB ft JIB
OFFSET
OFFSET
OFFSET
MAINBOOMANGLEdeg
OFFSET
OFFSET
OFFSET
SIDE
REAR
SIDE
FRONT
REDUCTION CHART
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
FROMMAIN BOOM
RATINGS
FROMMAIN JIBRATINGS
lb
lb
lb
lb lb
lb
N/A
N/A
RIGGING CHART
PART , lb
PART , lb
WIRE ROPE: / in diameterMin. breaking strength , lb
-
7/31/2019 YB4400 Product Guide Imperial DINISO
21/36
Grove YB4400 Series 21
Dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
YB4411
, m' ." , m
' ."
Retracted , m '" and Extended , m ' "
See Inset
, m' ."
mm"
mm."
Main blocktwopart line
Hook and ballonepart line
mm."
mm"
mm"
mm"
, m' ."
, m' .", m
' .", m
' ." , m' "
, m' ."
, m' ."
, m' "
, m' ."
, m' ."
, m' ."
, m' ."
, m ' ."Track Width
, m ' ."Frame Width
, m ' ."Max. Machine Width
, m ' ."C.L.O.R. Ret. and Down
, m ' ."C.L.O.R. Ext. and Down
*, m.
, m.
, m.
* boom headposition can onlybe used with adown haul block
Dimensions are with boom horizontaland the antitwo block bottomed.
Dimensions are withboom horizontaland the antitwoblock bottomed.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
22/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.22
Turning radius
A B C D E
Twowheel steer 4759 mm(15 t 7.4 in)
4482 mm(14 t 8.4 in)
4080 mm(13 t 4.6 in)
2556 mm(8 t 4.6 in)
4522 mm(14 t 10.0 in)
Fourwheel steer 3990 mm(13 t 1.1 in)
3346 mm(10 t 11.7 in)
2853 mm(9 t 4.3 in)
1470 mm(4 t 9.9 in)
3416 mm(11 t 2.5 in)
YB4411
COutside turning radius
DInside turning radius
E
B
A
-
7/31/2019 YB4400 Product Guide Imperial DINISO
23/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.Grove YB4400 Series 23
Range diagram
'
"B
OOM
'
"BOOM
'
"BO
OM
'
"B
OOM
'
"B
OOM
WITH
'
"JIB
WITH
'
"JIB
&'
"S
TINGER
YB4411
Booma
ndextensionlengthinfeet
Operating radius in eet rom axis o rotation
Heightfromt
hegroundinfeet
-
7/31/2019 YB4400 Product Guide Imperial DINISO
24/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
24
YB4411
1) The rated loads are the maximumliting capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,
beore loading to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown on outrig-gers do not exceed 85% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. Retracted outrigger ratedloads meet ASME B30.5-2004. Theseratings are based on reelysuspended loads with the craneleveled, standing on a rm, uniorm,supporting surace. Practicalworking loads depend on supporting
surace, operating radius, and otheractors aecting stability. Hazardoussurroundings, climatic conditions,experience o personnel, and propertraining must all be taken intoaccount by the operator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are or eitheroutriggers ully extended and down orully retracted and down. Ratings oroutriggers ully retracted and downwill apply or any intermediateoutrigger setting.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (125 psi). Loads onrubber may be transported at amaximum speed o 2.5 mph on asmooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 12,000 lb. Themaximum deck load only is 14,000 lb.
8) Do not induce any external sideloads to boom or jib.
80016879
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
.
BOOM
ON OUTRIGGERS lb
MAINBOOM
JIB
BOOM
degANGLE
MAINRADIUS
ft
RETRACTED
..............
....
....
ON RUBBER lb
F/R
RETRACTED F/REXTENDED
EXTENDEDBOOM
RETRACTED ft JIB
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
ft JIB
JIB STRUCTURAL CAPACITIES lb
EXTENDEDBOOM
RETRACTED
BOOM ANYBOOM
ANYBOOM
,,,,,
,,,,,
,
,
, ,,,
,,,,
FRONT REAR
SIDE
SIDE
, lbPART
, lbPART
RIGGING CHART
WIRE ROPE: / inch diameterMin. breaking strength , lb
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB,DEPLOYED
lb
lb
lb
lb
N/A
lbs
N/A
lb
-
7/31/2019 YB4400 Product Guide Imperial DINISO
25/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.Grove YB4400 Series 25
DIN/ISO range diagram
,
,
,
,
,
SECTION
SECTION
,
,
,
, , , , , , , , ,
,mJ
IB
, , , , , , , , ,
,
,
,
,
,
,
,
,
YB4409
Operating radius in meters rom axis o rotation
Booma
ndextensionlengthinmeters
Heightfromt
hegroundinmeters
-
7/31/2019 YB4400 Product Guide Imperial DINISO
26/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.26
DIN/ISO load chart
YB4409
1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown on outrig-gers do not exceed 80% o actual
tipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climaticconditions, experience ooperator, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at amaximum speed o 4 km/h on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 5440 kg. Themaximum deck load only is 6350 kg.
8) Do not induce any external sideloads to boom or jib.
1302492YB
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
*LIMIT RATINGS TO kg WHEN RD SECTION IS EXTENDED ANY AMOUNT.
ON RUBBER kgON OUTRIGGERS kg
MAINBOOM
JIB
,
RADIUSm
,
,
,
,
,
,
,
,
,
,
,
,
,
,
F/R F/R
SECTION BOOM ORSECTION BOOM WITH TH RETRACTED
ON RUBBER kgON OUTRIGGERS kg
RADIUSm
F/R F/R
SECTION BOOM WITH TH EXTENDED
BOOM
degANGLE
MAIN
SECTION BOOM
SECTION BOOM
JIB STRUCTURAL CAPACITIES kg
SECTION BOOM OR
WITH TH RETRACTEDWITH TH EXTENDED
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
:
. ,
,
,
radi us.
rotati on
vertical
on
exceed
kgPART
kgPART
RIGGING CHART
WIRE ROPE: mm diameter
Min. breaking strength , kN
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
kg
kg
kg
kg
N/A
kg
N/A
kg
FRONT REAR
SIDE
SIDE
radius.
rotati on
ver tical
on
exceed
-
7/31/2019 YB4400 Product Guide Imperial DINISO
27/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.Grove YB4400 Series 27
DIN/ISO range diagram
YB4409XL
,
,
,
,
,
,
,
,
SECTION
SECTION
, ,, ,, ,
,
,
,
,
,
,
,mJ
IB
,
,, , , ,, ,, , , ,
,
,
,
,
,
,
,
,
,
,
Operating radius in meters rom axis o rotation
Booma
ndextensionlengthinmeters
Heightfromt
hegroundinmeters
-
7/31/2019 YB4400 Product Guide Imperial DINISO
28/36
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.28
DIN/ISO load chart
YB4409XL
1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with load
applied.
2) The rated loads shown onoutriggers do not exceed 80% oactual tipping. The rated loadsshown on rubber do not exceed 75%o actual tipping. These ratings arebased on reely suspended loadswith the crane leveled, standing ona rm, uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience o
operator, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at amaximum speed o 4 km/h on asmooth, hard, level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 5443 kg. Themaximum deck load only is 6350 kg.
8) Do not induce any external sideloads to boom or jib.
1302119YB
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
MAINBOOM
JIB
F/R F/R
SECTION BOOM ORSECTION BOOM WITH TH RETRACTED
ON RUBBER kgON OUTRIGGERS kg
,
RADIUSm
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
F/R F/R
,
SECTION BOOM WITH TH EXTENDED
BOOM
degANGLE
MAIN
SECTION BOOM
SECTION BOOM
JIB STRUCTURAL CAPACITIES kg
SECTION BOOM OR
WITH TH RETRACTED WITH TH EXTENDED
ON RUBBER kgON OUTRIGGERS kg
,
RADIUSm
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
kgPART
kgPART
RIGGING CHART
WIRE ROPE: mm diameter
Min. breaking strength , kN
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
kg
kg
kg
kg
N/A
kg
N/A
kg
FRONT REAR
SIDE
SIDE
-
7/31/2019 YB4400 Product Guide Imperial DINISO
29/36
Grove YB4400 Series 29
DIN/ISO range diagram
YB4409-2
, , , , , , , , , , , , , , , , , , , , , , , , , , , ,
, , , , , , , , , , , , , , , , , , . , , , , , , , , ,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
, m JIB , m JIB
Operating radius in meters rom axis o rotation
Booma
ndextensionlengthinmeters
Heightfromt
hegroundinme
ters
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
30/36
30
DIN/ISO load chart
YB4409-2
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF
RATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
1) The rated loads are the maximumliting capacities as determined byoperating radius, boom extensionand boom angle. The operatingradius is the horizontal distancerom a projection o the axis orotation to the supporting surace,beore loading to the center o
vertical hoist line or tackle with loadapplied.
2) The rated loads shown on outrig-gers do not exceed 80% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace.Practical working loads dependon supporting surace, operatingradius, and other actors aectingstability. Hazardous surroundings,climatic conditions, experience o
personnel, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are oroutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (700 kPA). Loads onrubber may be transported at amaximum speed o 1,4 km/h on a
smooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 5440 kg. Themaximum deck load only is 6350 kg.
8) Do not induce any external sideloads to boom or jib.
80019958
BOOM
degANGLE
MAIN, m JIB
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
, m JIB
JIB STRUCTURAL CAPACITIES kg
BOOM
ON OUTRIGGERS kg
MAINBOOM
JIB
RADIUSm
RETRACTED
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,,
,
,
,
,
,
ON RUBBER kg
F/R
EXTENDEDBOOM
EXTENDEDBOOM
RETRACTEDBOOM ANY
BOOMANY
BOOM
F/R
kgPART
kgPART
RIGGING CHART
WIRE ROPE: mm diameter
Min. breaking strength , kN
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
kg
kg
kg
kg
N/A
kg
N/A
kg
FRONT REAR
SIDE
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
31/36
Grove YB4400 Series 31
DIN/ISO range diagram
YB4411
,mBO
OM
,mBO
OM
,
mBO
OM
,mBO
OM
,mBO
OM
WITH
,mJIB
WITH
,mJIB
&,
mSTIN
GER
Operating radius in meters rom axis o rotation
Booma
ndextensionlengthinmeters
Heightfromt
hegroundinmeters
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
32/36
32
DIN/ISO load chart
YB4411
1) The rated loads are the maximumliting capacities as determinedby operating radius only. Anycombination o boom lengthsand angles may be used to obtainoperating radius. The operatingradius is the horizontal distance
rom a projection o the axis orotation to the supporting surace,beore loading, to the center overtical hoist line or tackle with loadapplied.
2) The rated loads shown on outrig-gers do not exceed 80% o actualtipping. The rated loads shown onrubber do not exceed 75% o actualtipping. These ratings are basedon reely suspended loads with thecrane leveled, standing on a rm,uniorm, supporting surace. Practi-cal working loads depend on sup-
porting surace, operating radius,and other actors aecting stability.Hazardous surroundings, climaticconditions, experience ooperator, and proper training mustall be taken into account by theoperator.
3) The weights o all load handlingdevices such as hooks, hook blocks,slings, etc., except the hoist rope,shall be considered as part o theload. See reduction chart.
4) Ratings on outriggers are withoutriggers ully extended.
5) Ratings on rubber depend on tirecapacity, condition o tires and properinfation pressure (6,9 bar). Loads onrubber may be transported at a
maximum speed o 4 km/h on asmooth, hard level surace with boomretracted to the shortest lengthpossible and centered over ront.
6) For operating radius not shown, useload rating o next larger radius.
7) The maximum combined total boomand deck load is 5440 kg. Themaximum deck load only is 6350 kg.
8) Do not induce any external sideloads to boom or jib.
1302120YB
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDSWARRANTY.
:
. ,
,
,
,
BOOM
ON OUTRIGGERS kg
MAINBOOM
JIB
BOOM
deg
ANGLE
MAINRADIUS
m
RETRACTED
,
,
,
,
,
,
,
,
,
,
,
,
,
,,,
,
,
,
,
,
,
ON RUBBER kg
F/R
RETRACTED F/R
EXTENDED
EXTENDEDBOOM
RETRACTED , m JIB
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
OFFSET
, m JIB
JIB STRUCTURAL CAPACITIES kg
EXTENDEDBOOM
RETRACTEDBOOM ANY
BOOMANY
BOOM
kgPART
kgPART
RIGGING CHART
WIRE ROPE: mm diameter
Min. breaking strength , kN
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
kg
kg
kg
kg
N/A
kg
N/A
kg
FRONT REAR
SIDE
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.The individual cranes load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
-
7/31/2019 YB4400 Product Guide Imperial DINISO
33/36
Grove YB4400 Series 33
Symbols glossary
Drive
RotationElectrical system
Suspension
Fuel tank capacity
Tires
Engine
Brakes
Outrigger controls
Axles Outriggers
Transmission
Frame
Steering
Lights
Boom elevation
Cab
Swing
Hydraulic system
Hoist
Boom nose
Radius
Boom extension
Boom length
Grade
Gear
Boom
Counterweight
Speed
Oil
Extension
HookblockH
Heavy duty jib
-
7/31/2019 YB4400 Product Guide Imperial DINISO
34/36
34
Notes
-
7/31/2019 YB4400 Product Guide Imperial DINISO
35/36
Grove YB4400 Series 35
Notes
-
7/31/2019 YB4400 Product Guide Imperial DINISO
36/36
Tis document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specifcation, equipment, and price
changes without notice. Illustrations shown may include optional equipment and
accessories and may not include all standard equipment.
Regional oces
ChinaShanghai, ChinaTel: +86 21 6457 0066Fax: +86 21 6457 4955
Greater Asia-PacifcSingaporeTel: +65 6264 1188Fax: +65 6862 4040
Europe, Middle East, AricaEcully, FranceTel: +33 (0)4 72 18 20 20Fax: +33 (0)4 72 18 20 00
AmericasManitowoc, Wisconsin, USATel: +1 920 684 6621Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USATel: +1 717 597 8121Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
ChinaBeijingChengduGuangzhouXian
Greater Asia-PacifcAustraliaAdelaideBrisbaneMelbourne
SydneyIndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore
FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFnzeresSlovakiaSarisUSAManitowocPort WashingtonShady Grove
AmericasBrazilAlphavilleMexicoMonterreyChileSantiago
Europe, Middle East,AricaCzech Republic
NetvoriceFranceBaudemontCergyDecinesGermanyLangeneldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugal
BaltarRussiaMoscowU.A.E.DubaiU.K.Buckingham