REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:4

5 P

M

T100

TITLE PAGE

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

Author

Checker

PRELIMINARY SET

FOUNDRY 19655 19TH AVE. NE, MINNEAPOLIS, MN 55418

"ALL MEASUREMENTS ARE APPROXIMATE"

A

B

A

B

G

PATIO TO SIDEWALK

PROPERTY + - 1.67 ACRES89 PROPOSEDPARKING SPACES

(INCLUDEING 6 COMPACTAND 4 ACCESSIBLE

REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:4

2 P

M

AS100

MARKETING SITEPLAN

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

JD

Checker

PRELIMINARY SET

1" = 20'-0"AS100

1 Site MARKETING

UP

DN

UP

DN

DN

DN

UP

GENERAL BUILDING PLAN NOTES:

1. GENERAL CONTRACTOR TO COORDINATE THIS PLAN WITH MECHANICAL. ELECTRICAL AND PLUMBING SUBCONTRACTORS AS TO LOCATIONS FOR EQUIPMENT, FIXTURES, METERS, DUCTWORK ETC. NOTIFY ARCHITECT IMMEASDIATELY OF ANY CONFLICTS BETWEEN ARCHITECTURAL DRAWINGS AND MEP SUBCONTRACTORS.

2. REFER TO CODE ANALYSIS (SHEET T101) TO VERIFY TYPES AND LOCATIONS OF REQUIRED FIRE RATINGS. FIRE RATINGS NOTED ON WALL TYPES (SHEET A001) ARE MAXIMUM RATINGS AND MAY EXCEED THE RATINGS THAT ARE ACTUALLY REQUIRED FOR THIS PROJECT.

3. DIMENSOINS AT EXTERIOR WALLS ARE TO THE OUTSIDE FACE OFEXTRIOR SHEATHING OR OUTSIDE FACE OF MASONRY UNLESS NOTED OTHERWISE.

4. DIMENSIONS AT INTERIOR PARTIONS AND CORRIDOR WALLS ARE TO CETERLINE OF FRAMING UNLESS NOTED OTHERWISE. WHERE CLEAR DIMENSIONS ARE NOTED, THESE MUST BE MAINTAINED.

5. DIMENSIONS AT UNIT DEMISING WALLS ARE TO CENTERLINE OF WALL ASSEMBLY AIRSPACE UNLESS NOTED OTHERWISE.

6. DIMENSIONS FOR WINDOWS, DOORS, EQUIPMENT, AND FEATURES ARE TO CENTERLINES. VERIFY WINDOW ROUGH OPENINGS WITH MANUFACTURER.

7. IF ANY DIMENSION IS NOT CLEAR, NOT GIVEN, OR PRESENTS A CONFLICT, NOTIFY ARCHITECT IMMEADIATELY.

8. VERIFY SLAB EDGE LOCATIONS, BRICK AND MASONRY FACE WITH ARCHITECTURAL AND STRUCTURAL DETAILS.

9. REFER TO STRUCTURAL PLANS FOR BEAM, JOIST, HEADER LOCATIONS AND SIZING.

10. ALL OPENINGS CUT, OPENINGS MADE OR EQUIPMENT INSTALLED IN FIRE RATED WALLS, PARTITIONS, FLOORS OR CEILINGS SHALL BE RESTORED, SEALED FIRESTOPPED OR OTHERWISE CONSTRUCTED TO MAINTAIN THE INTEGRITY OF THE FIRE RATING TO THE FULL SATISFACTION OF THE ARCHITECT, ENGINEER AND BUILDING OFFICIAL. THE GENERAL CONTRACTOR SHALL COORDINATE AND BE RESPONSIBLE FOR THIS WORK.

11. ALL SIDEWALL PENETRATIONS AND VENTING FOR LAUNDRY, BATH AND KITCHEN EXHAUST SHALL BE INSULATED TO PREVENT CONDENSATION. ALIGN ALL VENTS HORIZONTALLY AND VERTICALLY.

12. THE BUILDING IS REQUIRED TO PASS AIR INFILTRATION TESTING PER THE MINNESOTA ENERGY CODE. ALL PENETRATIONS SHALL BE SEALED APPROPRIATELY TO MEET REQUIREMENTS. INSTALL ALL SEALED PENETRATIONS TO ACCOMODATE WOOD SHRINKAGE.

13. TAPE AND SEAL JOINTS AT MOISTURE CONTROL MEMBRANES.

14. SEAL TOP SIDE OF PRECAST PLANK AND UNDERSIDE OF PRECAST PLANK AT ALL VERTICAL PENETRATIONS.

15. INSTALL INSULATION IN ALL BEDROOM, BATHROOM AND LAUNDRY ROOM WALLS AND WALLS CONTAINING PLUMBING PIPES AS NOTED ON WALL TYPES (SHEET A001).

16. ALL EXPOSED PIPES, VENTS AND CONDUIT PENETRATING WALLS, FLOORS OR CEILINGS SHALL HAVE FINISHED TRIM RINGS (ESCUCHEONS).

17. WHERE ACCESS PANELS ARE REQUIRED FOR EQUIPMENT, UTILITIES OR DEVICES, THOSE PANELS SHALL BE INSTALLED WHETHER OR NOT THEY ARE SPECIFICALLY SHOWN ON THE DRAWINGS. WHEN INSTALLED IN A FIRE RATED ASSEMBLY, ACCESS PANEL MUST BE FIRE RATED TO MATCH RATING OF THAT ASSEMBLY. VERIFY ALL LOCATIONS WITH ARCHITECT BEFORE INSTALLING.

18. PROVIDE BLOCKING IN WALLS FOR MOUNTING EQUIPMENT, RAILS, STOPS, CASEWORK AND ALL OTHER SPECIALTIES AND ACCESSORIES.REFER TO STANDARD MOUNTING HEIGHTS UNLESS OTHERWISE NOTED.

19. FINISH FLOOR ELEVATION CHANGE AT DOORS OR MATERIAL TRANSITIONS SHALL NOT EXCEED 1/2" UNLESS NOTED OTHERWISE.

20. EXTERIOR LANDINGS, STOOPS AND PORCHES SHALL BE LEVEL ACROSS DOORWAYS AND SHALL SLOPE AWAY FROM BUILDING 1/4" PER FOOT.

21. REFER TO SHEET A001 FOR WALL TYPES AND ASSEMBLIES.

22. REFER TO SHEET A002 FOR BUILDING SYSTEMS AND ASSEMBLIES.

23. REFER TO FINISH SCHEDULE FOR INTERIOR FINISH MATERIAL TYPES.

24. REFER TO DOOR SCHEDULE FOR INFORMATION ON DOORS AND OPENINGS. ALL DOORS ARE NUMBERED TO KEY WITH DOOR SCHEDULE. NOTIFY ARCHITECT OF ANY DISCREPANCIES

A200

A200

A200

1

4

3

A2002

1 2 3 4 5 6

J

I

H

F

7 8 9 10

E

D

C

B

A

20' - 0" 20' - 0" 20' - 0" 20' - 0" 20' - 0"

17463 SF

TENANT

1050 SF

EXISTINGLOADING

DOCK-

-

PATIO TO SIDEWALKNEW

PATIO DECKNEW

14

' -

7 7

/8"

13

' -

3 7

/8"

DRAINS

A

A

A

A

A

A

A

A

A

A

A

A

G

G

G

G

G

G

G

G

G

G

G

DDDDDDDDDDCCCFFFCCCBBBBBB

GGGGGGGGGGGGGGGG

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

G

STEEL BEAM ABOVE

1' -

1 1

/2"

6' -

7 1

/2"7

1/8

" 6' -

1 1

/8"9

3/8

" 6' -

3 3

/8"

2' -

0" 7

' -

6"

9"

6' -

3"

9"

6' -

3"

2' -

0" 7

' -

6"

9"

6' -

3"

9"

5' -

6"

2' -

0" 7

' -

6"

8 1

/4" 6' -

2 1

/4"8

1/4

" 6' -

2 1

/4"

3' -

0 1

/2"

3' - 0 1/2"7' - 9"

4' -

9"

10"

4' -

10

"

10"

4' -

10

"1

0"

9"

4' -

9"

9"

4' -

0"

10"

3' -

11

1/4

"

10"

4' -

0"

10"

4' -

0"

9"

4' -

0"

5"

NEW DOOR

DEMOLISH BATH CONFIGURATION

6" LEDGE

17

' - 1

0 1

/2"

X1

2926 SF

OFFICETENANT

9' - 0"

G

3491 SF

OFFICETENANT

-

---

REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:3

9 P

M

A101

FIRST FLOOR PLAN

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

JD

Checker

PRELIMINARY SET

1/8" = 1'-0"A101

1 1ST FLOOR

DN

DN

DN

DN

GENERAL BUILDING PLAN NOTES:

1. GENERAL CONTRACTOR TO COORDINATE THIS PLAN WITH MECHANICAL. ELECTRICAL AND PLUMBING SUBCONTRACTORS AS TO LOCATIONS FOR EQUIPMENT, FIXTURES, METERS, DUCTWORK ETC. NOTIFY ARCHITECT IMMEASDIATELY OF ANY CONFLICTS BETWEEN ARCHITECTURAL DRAWINGS AND MEP SUBCONTRACTORS.

2. REFER TO CODE ANALYSIS (SHEET T101) TO VERIFY TYPES AND LOCATIONS OF REQUIRED FIRE RATINGS. FIRE RATINGS NOTED ON WALL TYPES (SHEET A001) ARE MAXIMUM RATINGS AND MAY EXCEED THE RATINGS THAT ARE ACTUALLY REQUIRED FOR THIS PROJECT.

3. DIMENSOINS AT EXTERIOR WALLS ARE TO THE OUTSIDE FACE OFEXTRIOR SHEATHING OR OUTSIDE FACE OF MASONRY UNLESS NOTED OTHERWISE.

4. DIMENSIONS AT INTERIOR PARTIONS AND CORRIDOR WALLS ARE TO CETERLINE OF FRAMING UNLESS NOTED OTHERWISE. WHERE CLEAR DIMENSIONS ARE NOTED, THESE MUST BE MAINTAINED.

5. DIMENSIONS AT UNIT DEMISING WALLS ARE TO CENTERLINE OF WALL ASSEMBLY AIRSPACE UNLESS NOTED OTHERWISE.

6. DIMENSIONS FOR WINDOWS, DOORS, EQUIPMENT, AND FEATURES ARE TO CENTERLINES. VERIFY WINDOW ROUGH OPENINGS WITH MANUFACTURER.

7. IF ANY DIMENSION IS NOT CLEAR, NOT GIVEN, OR PRESENTS A CONFLICT, NOTIFY ARCHITECT IMMEADIATELY.

8. VERIFY SLAB EDGE LOCATIONS, BRICK AND MASONRY FACE WITH ARCHITECTURAL AND STRUCTURAL DETAILS.

9. REFER TO STRUCTURAL PLANS FOR BEAM, JOIST, HEADER LOCATIONS AND SIZING.

10. ALL OPENINGS CUT, OPENINGS MADE OR EQUIPMENT INSTALLED IN FIRE RATED WALLS, PARTITIONS, FLOORS OR CEILINGS SHALL BE RESTORED, SEALED FIRESTOPPED OR OTHERWISE CONSTRUCTED TO MAINTAIN THE INTEGRITY OF THE FIRE RATING TO THE FULL SATISFACTION OF THE ARCHITECT, ENGINEER AND BUILDING OFFICIAL. THE GENERAL CONTRACTOR SHALL COORDINATE AND BE RESPONSIBLE FOR THIS WORK.

11. ALL SIDEWALL PENETRATIONS AND VENTING FOR LAUNDRY, BATH AND KITCHEN EXHAUST SHALL BE INSULATED TO PREVENT CONDENSATION. ALIGN ALL VENTS HORIZONTALLY AND VERTICALLY.

12. THE BUILDING IS REQUIRED TO PASS AIR INFILTRATION TESTING PER THE MINNESOTA ENERGY CODE. ALL PENETRATIONS SHALL BE SEALED APPROPRIATELY TO MEET REQUIREMENTS. INSTALL ALL SEALED PENETRATIONS TO ACCOMODATE WOOD SHRINKAGE.

13. TAPE AND SEAL JOINTS AT MOISTURE CONTROL MEMBRANES.

14. SEAL TOP SIDE OF PRECAST PLANK AND UNDERSIDE OF PRECAST PLANK AT ALL VERTICAL PENETRATIONS.

15. INSTALL INSULATION IN ALL BEDROOM, BATHROOM AND LAUNDRY ROOM WALLS AND WALLS CONTAINING PLUMBING PIPES AS NOTED ON WALL TYPES (SHEET A001).

16. ALL EXPOSED PIPES, VENTS AND CONDUIT PENETRATING WALLS, FLOORS OR CEILINGS SHALL HAVE FINISHED TRIM RINGS (ESCUCHEONS).

17. WHERE ACCESS PANELS ARE REQUIRED FOR EQUIPMENT, UTILITIES OR DEVICES, THOSE PANELS SHALL BE INSTALLED WHETHER OR NOT THEY ARE SPECIFICALLY SHOWN ON THE DRAWINGS. WHEN INSTALLED IN A FIRE RATED ASSEMBLY, ACCESS PANEL MUST BE FIRE RATED TO MATCH RATING OF THAT ASSEMBLY. VERIFY ALL LOCATIONS WITH ARCHITECT BEFORE INSTALLING.

18. PROVIDE BLOCKING IN WALLS FOR MOUNTING EQUIPMENT, RAILS, STOPS, CASEWORK AND ALL OTHER SPECIALTIES AND ACCESSORIES.REFER TO STANDARD MOUNTING HEIGHTS UNLESS OTHERWISE NOTED.

19. FINISH FLOOR ELEVATION CHANGE AT DOORS OR MATERIAL TRANSITIONS SHALL NOT EXCEED 1/2" UNLESS NOTED OTHERWISE.

20. EXTERIOR LANDINGS, STOOPS AND PORCHES SHALL BE LEVEL ACROSS DOORWAYS AND SHALL SLOPE AWAY FROM BUILDING 1/4" PER FOOT.

21. REFER TO SHEET A001 FOR WALL TYPES AND ASSEMBLIES.

22. REFER TO SHEET A002 FOR BUILDING SYSTEMS AND ASSEMBLIES.

23. REFER TO FINISH SCHEDULE FOR INTERIOR FINISH MATERIAL TYPES.

24. REFER TO DOOR SCHEDULE FOR INFORMATION ON DOORS AND OPENINGS. ALL DOORS ARE NUMBERED TO KEY WITH DOOR SCHEDULE. NOTIFY ARCHITECT OF ANY DISCREPANCIES

A200

A200

A200

1

4

3

A2002

1 2 3 4 5 6

J

I

H

F

7 8 9 10

E

D

C

B

A

6383 SF

OFFICETENANT

-

-

E EE E E E

E

E

E

E

E

E

E

E

EE

EEEH

X1

G

-

---

5' - 6"

REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:4

1 P

M

A102

SECOND FLOOR

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

Author

Checker

PRELIMINARY SET

1/8" = 1'-0"A102

1 2ND FLOOR

17463 SF

TENANT

1050 SF

EXISTINGLOADING

DOCK

PATIO TO SIDEWALKNEW

DRAINS

STEEL BEAM ABOVE

NEW DOOR

6" LEDGE

2926 SF

OFFICETENANT

3491 SF

OFFICETENANT

Legend

OFFICE TENANT 1

OFFICE TENANT 2

PRODUCTION SPACE

SPACE

EXISTINGDOCK

100' - 0"

18

0' -

0"

54

' -

4"

19' - 0"

79

' - 1

1"

1189 SF

SPACE

REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:4

3 P

M

I103

FIRST FLOORMARKETING

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

JD

PK

PRELIMINARY SET

1/8" = 1'-0"I103

1 1ST FLOOR MARKETING

1/8" = 1'-0"I103

2 LOWER LEVEL MARKETING

Legend

OFFICE TENANT 1

6383 SF

OFFICETENANT

80

' -

8"

80' - 8 1/2"

REVISIONS:

SHEET TITLE

PROJECT NO:

DRAWN BY:

CHK'D BY:

DESCRIPTIONDATEMARK

www.collagearch.com

DATE:

DATE:

I HEREBY CERTIFY THAT THIS PLAN SPECIFICATION OR REPORT WAS PREPARED BY ME OR UNDER MY DIRECT SUPERVISION AND THAT I AM A DULY LICENSED ARCHITECT UNDER THE LAWS OF THE STATE OF MINNESOTA.

PETER KEELYREGISTRATION NO: 23570

Collage | architectsArchitectsPete Keely651.472.0050705 Raymond Avenue, Suite #200St. Paul, Minnesota 55114

5/10

/201

9 3:

43:4

5 P

M

I104

SECOND FLOORMARKETING

FOUNDRY 19

Issue Date

Project Number

655 19th Ave. NEMinneapolis, MN 55418

JD

PK

PRELIMINARY SET

1/8" = 1'-0"I104

1 2ND FLOOR T.I.

ROOF