your partner for high performance solutions densit a/s densit a/s 44, rørdalsvej · p.o.box 220...
TRANSCRIPT
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT A/S
Densit a/s44, Rørdalsvej · P.O.Box 220DK-9100 AalborgPhone: + 45 98 16 70 11Fax: + 45 99 33 77 88E-mail: [email protected]: www.densit.com
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT A/S
In 1972 the cement plant Aalborg Portland launches the development project “new concrete” based on the assumptions that it is possible to develop cement-based materials with ultra high strength and durability
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT A/S
The Densit® technology or the DSP-technology is invented and developed (DSP – Densified Systems with ultra-fine Particles)
0.01 mm
CEMENT PASTE(Cement particles and water)w/c = 0,50-0,70
SUPER PLASTIZISED CEMENT PASTE(Cement particles, Superplastiziser and water)w/c = 0,30-0,35
DSP TECHNOLOGY(Cement, Microsilica, Superplastiziser and water)w/p = 0,18-0,22
1 mm
10 mm
Microstructure
Thin section
Fracture surface
Concrete Densit®
0.01 mm
1 mm
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT A/S
In 1978 the Densit® technology is patented
Compressive strength and porosity Development of compressive strength
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT A/S
In 1983 Densit a/s is established as an independent company
Densit is owned by Illinois Tool Works Inc.
Today Densit exports 85% of its products to more than 30 countries world-wide
Through out the world Densit has a wide network of partners and trained applicators with thorough knowledge and experience with Densit® products and solutions
SubsidiaryDensit Asia Pacific, Malaysia
Sales office Densit Germany
Joint Venture USA
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
MISSION STATEMENT
Densit a/s fulfils the needsof specific market
segments for reinforcementof areas exposed to severe demands
which arecritical to the end user’s activities
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
MISSION STATEMENT
Densit values
Co-operation Competence Responsibility
Each Densit® product, service and the way we act towards our customers and colleagues reflect our commitment to the three Densit values
Customer policy
We speak from more than 20 years experience and with a global understanding
We respond to our customers quickly wherever they are in an approachable and friendly way
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
Densit a/s has 20 years of experience in developing and selling high performance solutions based on our high strength and durable cement-based products
The Densit® high performance solutions are well-established solutions in thefollowing business areas:
Industrial Flooring Reinforcement of offshoreand Pavements oil & gas platforms Security Barriers Wear Protection
Offshore wind turbine foundations
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
INDUSTRIAL FLOORING AND PAVEMENTS
Airports
Ports
Warehouses- and distribution centres
Fresh food industry
Heavy & light industry
Parking areas are subjected to heavy traffic
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
INDUSTRIAL FLOORING AND PAVEMENT-PRODUCTS
Ferrotop™ (23-35 mm)
Densitop® ST (5-8 mm): Densitop® MT (8-12 mm): Densitop® LT (15-25 mm):
Ferrotop™ Densiphalt®:Standard
Densitop®:
All flooring products can by dyed in red, yellow, green or whiteAll flooring products can be sand saturated to increase the skid resistance
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
WHAT MAKES DENSIT® FLOORING SOLUTIONS THE NATURAL CHOICE:
High wear resistance
No joints
High bearing capacity/resistant to point loads
High impact resistance
Impermeability
Resistance to freeze-thaw cycles
Ease of cleaning
Dust-free surface
Ability to withstand steam cleaning
Fast installation operational in occupation time
Early trafficking – 24 hours at 20°C
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
OFFSHORE – OIL & GAS
Reinforcement of offshore oil and gas platforms
Extending lifetime of platform
Cost-effective structural repair
Upgrading of platform
Corrosion protection
Flexible and fast installation
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
OFFSHORE - WIND
Offshore wind turbine foundations
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
WEAR PROTECTION
Cement plants
Coal-fired power stations
Steelworks
Paper plants
Mineral sand - Processing
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
High erosive and abrasive wear resistance
Ability to be formed in any shape without vulnerable joints
Seamless graduation in lining thickness within a component
High thermal resistance
Flexibility in installation in components with complex geometry
Mechanical reinforcement ensuring that linings do not become dislodged
Quick usable
Quick installation time
The Densit® wear protection products can be either trowelled, cast or sprayed.Pre-lined components and insulation are also options.
DENSIT® WEAR PROTECTION SOLUTIONS OFFER UNIQUE PROPERTIES LIKE:
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
BUSINESS AREAS
SECURITY BARRIERS Automatical teller machines (ATM’s)
Safes
Vaults
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
VISION
Densit a/s aims at continuous growth by:
Expanding the network of qualified partners within the core business areas over an increasing geographical area in order to serve the customers in the best way
Maintaining the technological leading position
Using at least 5% of the annual turnover for product development and research
Continuously developing new products and concepts based on customers requirements
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
ORGANISATION
HUMAN RESOURCESMARKETING
SALESFINANCE/IT/
PRODUCTION/QA
Densit a/s has more than 80 employees
SECURITY
WEAR-
PROTEC-
TION
INDUSTRIAL
FLOOR-
ING
BUSINESS
DEVELOPMENT
OFFSHORE
JOINT
VENTURE;
USA
DENSIT
GERMANY
DENSIT ASIA
PASIFIC,
MALAYSIA