yu. i. baranov and w. j. lafferty optical technology division optical technology division national...
TRANSCRIPT
![Page 1: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/1.jpg)
Yu. I. BARANOVYu. I. BARANOV and W. J. LAFFERTY and W. J. LAFFERTY
Optical Technology DivisionOptical Technology DivisionNational Institute of Standards and Technology,National Institute of Standards and Technology,
Gaithersburg, MD 20899-8441, USAGaithersburg, MD 20899-8441, USA
The water vapor continuum absorptionThe water vapor continuum absorption in the 8 to 12 in the 8 to 12 μm region at temperaturesμm region at temperatures
from 311 to 352Kfrom 311 to 352K..
![Page 2: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/2.jpg)
Introduction The water vapor continuum absorption in
the atmospheric 8 to 12 μm window strongly affects the Earth’s outgoing radiation and therefore is of great importance for radiative balance calculations.
Over the past twenty years many groups in the world have used long-base (up to 100 m) long-path (up to several thousands m) cells to measure the H2O continuum.
![Page 3: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/3.jpg)
Introduction
The other high-sensitive techniques,
like photo-acoustic or cavity ring-down spectroscopy were also employed for these measurements.
Nevertheless the existing data is not adequate to match the current requirements.
![Page 4: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/4.jpg)
Introduction
How to measure the continuum with the 2 m base multi-pass cell available at NIST? Is this possible?
This is certainly not possible at room or lower temperatures because of the low vapor pressure of H2O at these temperatures.
![Page 5: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/5.jpg)
Introduction
The solution is to make the measurements at an elevated temperature. This allows one to fill the cell with water vapor at pressures up to several tens of torrs. This is enough to make continuum absorption measurable with the available path length of about 100 m since the continuum absorbance increases as the square of the water vapor pressure (density).
![Page 6: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/6.jpg)
Experimental set-up view
![Page 7: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/7.jpg)
Specific experimental details for H2Ocontinuum measurements
1. How to avoid water vapor condensation?
All of the protrusive parts of the cell, such as valves, window holders, sleeves etc., were equipped with additional electric heaters and coated with thermoinsulation.
This was done in order to provide uniform temperature all of the parts of the internal cell surface and to avoid water vapor condensation.
Six additional thermocouples were set up to measure and control temperatures.
![Page 8: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/8.jpg)
Specific experimental details for H2Ocontinuum measurements
2. How to get water vapor?
The water vapor sampler is a horizontally positioned stainless steel cylinder with distilled water. The sampler is equipped with electric heater and thermoinsulation.
The liquid water temperature was kept close to the cell body temperature.
In order to save a thermal equilibrium and the optic stability we spent over 30 minutes to fill the cell with water vapor.
![Page 9: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/9.jpg)
Specific experimental details for H2Ocontinuum measurements
3. How to measure water vapor pressure?
The gauge (Barocell 600A, 100 torr) for water vapor pressure measurement is also heated up to the cell body temperature.
We calibrated it periodically filling the cell with nitrogen and measuring the pressure with the second gauge (MKS Baratron 270, 1000 torr), operating under regular temperature.
The calibration dependence was found linear and stable. The pressure estimated systematic error is about 0.6%.
![Page 10: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/10.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
![Page 11: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/11.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
Why so low ?
![Page 12: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/12.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
Possible minimalIntensity of the
instrument’s beam
Why so low ?
![Page 13: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/13.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
Possible minimalIntensity of the
instrument’s beam
Acceptable signal to noise ratio:
200 – 300 scans
Why so low ?
+
![Page 14: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/14.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
Possible minimalIntensity of the
instrument’s beam
Acceptable signal to noise ratio:
200 – 300 scans
Reasonable time of scanning:few hours
Why so low ?
+ +
![Page 15: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/15.jpg)
Experimental conditionsSpectral resolution is 0.1cm-1
Possible minimalIntensity of the
instrument’s beam
Acceptable signal to noise ratio:
200 – 300 scans
Reasonable time of scanning:few hours
Why so low ?
= 0.1cm-1+ +
![Page 16: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/16.jpg)
Experimental conditions
TemperatureK (±0.3K)
Pressure rangetorr
Path lengthm
Number of spectra
310.8 21.2 to 45.4 80-116 35
318.0 25.5 to 55.7 84-116 40
325.8 33.7 to 86.3 92-116 43
339.3 42.4 to 90.8 92-116 47
351.9 43.2 to 113 84-116 33
Spectral resolution is 0.1 cm-1
![Page 17: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/17.jpg)
An example of IR water vapor spectrum
0
0.2
0.4
0.6
0.8
1
1750 1950 2150 2350 2550 2750 2950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
Res=0.1 cm-1
T=310.7KP=43.3 torr
L=10805 cm
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300 1400
Tra
ns
mit
tan
ce
Continuum absorption
The v2 watervapor fundamental
band
![Page 18: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/18.jpg)
An example of IR water vapor spectrum
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300 1400
Tra
ns
mit
tan
ce
Continuum absorption
The v2 watervapor fundamental
band
0
0.2
0.4
0.6
0.8
1
1750 1950 2150 2350 2550 2750 2950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
Res=0.1 cm-1
T=339.2KP=89.5 torrL=9205 cm
![Page 19: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/19.jpg)
The quick data treatment methodThe small part of four spectra at
different pressures
0.5
0.6
0.7
0.8
0.9
1
940 942 944 946 948 950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
T=318KL=108mP, torr28.735.443.353.9
![Page 20: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/20.jpg)
The quick data treatment methodThe small part of four spectra at
different pressures
0.5
0.6
0.7
0.8
0.9
1
940 942 944 946 948 950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
T=318KL=108mP, torr28.735.443.353.9
![Page 21: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/21.jpg)
The small part of four spectra at different pressures
0.5
0.6
0.7
0.8
0.9
1
940 942 944 946 948 950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
T=318KL=108mP, torr28.735.443.353.9
The quick data treatment methodMeasured absorbance versus
density square
0
1
2
3
4
0 0.005 0.01
Density, amagat2
(-ln
T/L
)*1
05,
cm
-1
318K326K339K
![Page 22: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/22.jpg)
The quick data treatment methodThe small part of four spectra at
different pressures
0.5
0.6
0.7
0.8
0.9
1
940 942 944 946 948 950
Wavenumber, cm-1
Tra
ns
mit
tan
ce
T=318KL=108mP, torr28.735.443.353.9
L=944.2 cm-1
Measured absorbance versus density square
0
1
2
3
4
0 0.005 0.01
Density, amagat2
(-ln
T/L
)*1
05,
cm
-1
318K326K339K
![Page 23: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/23.jpg)
The temperature dependence of the continuum binary absorption coefficient at 942 cm-1
0
1.5
3
4.5
6
7.5
270 280 290 300 310 320 330 340 350 360
Temperature, K
Ba
a*1
022 ,
cm
-1/(
atm
*mo
lec
*cm-3
) Coffey, 1977Nordstrom,1978Peterson, 1979Loper, 1983Hinderling, 1987Cormier, 2005Present work
![Page 24: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/24.jpg)
The temperature dependence of the continuum binary absorption coefficient at 942 cm-1
0
1.5
3
4.5
6
7.5
270 280 290 300 310 320 330 340 350 360
Temperature, K
Ba
a*1
022 ,
cm
-1/(
atm
*mo
lec
*cm-3
) Coffey, 1977Nordstrom,1978Peterson, 1979Loper, 1983Hinderling, 1987Cormier, 2005Present work
00
1n
00
kTD1kT
Dexp
kTD1kT
Dexp
TT
KK
A. A. Vigasin, JQSRT, 64, 25, 2000
D=-15.7kJ/moleN. Goldman et al., J. Phys. Chem. A
108, 787 (2004)
T0=296K; K0=Kexp(296)
![Page 25: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/25.jpg)
The temperature dependence of the continuum binary absorption coefficient at 942 cm-1
0
1.5
3
4.5
6
7.5
270 280 290 300 310 320 330 340 350 360
Temperature, K
Ba
a*1
022 ,
cm
-1/(
atm
*mo
lec
*cm-3
) Coffey, 1977Nordstrom,1978Peterson, 1979Loper, 1983Hinderling, 1987Cormier, 2005Present work
00
1n
00
kTD1kT
Dexp
kTD1kT
Dexp
TT
KK
A. A. Vigasin, JQSRT, 64, 25, 2000
D=-15.7kJ/moleN. Goldman et al., J. Phys. Chem. A
108, 787 (2004)
T0=296K; K0=Kexp(296)
T0=311K; K0=Kexp(311)
![Page 26: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/26.jpg)
The water vapor continuum absorption coefficients
0
1
2
3
800 850 900 950 1000 1050 1100 1150
Wavenumber, cm-1
Cs*1
02
2,
cm
2m
ole
c-1a
tm-1
310.7K
352.1K
325.7K
![Page 27: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/27.jpg)
The basic method of the data processing
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300
Wavenumber, cm-1
Tra
nsm
itta
nce
T=318KP=52.1 torr
L=116 m
![Page 28: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/28.jpg)
The basic method of the data processing
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300
Wavenumber, cm-1
Tra
nsm
itta
nce
T=318KP=52.1 torr
L=116 m
![Page 29: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/29.jpg)
The basic method of the data processing
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300
Wavenumber, cm-1
Tra
nsm
itta
nce
T=318KP=52.1 torr
L=116 m
![Page 30: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/30.jpg)
The basic method of the data processing
0
0.2
0.4
0.6
0.8
1
800 900 1000 1100 1200 1300
Wavenumber, cm-1
Tra
nsm
itta
nce
T=318KP=52.1 torr
L=116 m
![Page 31: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/31.jpg)
The basic method of the data processing
0
0.2
0.4
0.6
0.8
1
1050 1060 1070 1080 1090 1100
Wavenumber, cm-1
Tra
nsm
itta
nce
T=318KP=52.1 torr
L=116 m
![Page 32: Yu. I. BARANOV and W. J. LAFFERTY Optical Technology Division Optical Technology Division National Institute of Standards and Technology, Gaithersburg,](https://reader036.vdocument.in/reader036/viewer/2022081515/56649c9a5503460f94958324/html5/thumbnails/32.jpg)
Summary
Pure water vapor spectra have been recorded over a wide range of temperatures and pressures.
Continuum binary absorption coefficients have been determined in the region 800 cm-1 to 1150 cm-1.
Our data at 944 cm-1 have been compared with the data obtained recently by use of CRD spectroscopy technique. The systematic difference exceeds 10%. But relative changes of absorption coefficient with temperature are in good agreement.
Ro-vibrational structure has been calculated using the HITRAN data base and compared with experimental spectra. This comparison shows that the HITRAN water vapor absorption line intensities need to be corrected.