yuletide glitz linenspage 1 of 2 christmas napkin corner use these instructions for the napkin...

Yuletide Glitz Linens#61046 • 15 DESIGNS

It is a violation of copyright law to make and distibute copies of OESD software or artwork. Software is licensed to the original purchaser for use at one location. © 1992-2007 OESD, Inc. All rights reserved

HE873_48 Small Lace Edged Border

4.89 X 1.65 in.124.21 X 41.91 mm

9,791 St. R

HE874_48 Small Lace Edged Corner

2.82 X 2.84 in.71.63 X 72.14 mm

8,571 St. R

HE875_48 Large Lace Edged Border

5.78 X 2.20 in.146.81 X 55.88 mm

15,325 St. R L

HE876_48 Large Lace Edged Corner

3.50 X 3.46 in.88.90 X 87.88 mm

13,201 St. R

HE877_48 Mini Lace Edged Corner

2.37 X 2.34 in.60.20 X 59.44 mm

5,626 St. R

HE878_48 Star Accent

1.27 X 1.84 in.32.26 X 46.74 mm

2,054 St. R S

HE879_48 Snowflake Accent

2.64 X 1.59 in.67.06 X 40.39 mm

3,912 St. R

HE880_48 Star & Snowflake Corner

4.09 X 4.08 in.103.89 X 103.63 mm

7,630 St. R

HE881_48 Tree Accent

2.50 X 2.62 in.63.50 X 66.55 mm

3,863 St. R

HE882_48 Tree Border

5.39 X 3.35 in.136.91 X 85.09 mm

9,452 St. R L

z Design contains a loose fill.R Some white areas shown are not stitched.

L = Design is larger than 5” (127 mm) in either direction. S = Design is smaller than 1.5” (38.1 mm) in either direction.

HE883_48 Tree Corner

4.45 X 4.48 in.113.03 X 113.79 mm

8,297 St. R

HE884_48 Bell Accent

2.53 X 2.12 in.64.26 X 53.85 mm

4,355 St. R

HE885_48 Bell Border

5.75 X 2.94 in.146.05 X 74.68 mm

9,798 St. R L

HE886_48 Bell Corner

3.62 X 3.63 in.91.95 X 92.20 mm

5,751 St. R

HE887_48 Bell & Snowflake Border

6.04 X 2.62 in.153.42 X 66.55 mm

12,188 St. R L

#61046 • 15 DESIGNS

It is a violation of copyright law to make and distibute copies of OESD software or artwork. Software is licensed to the original purchaser for use at one location. © 1992-2007 OESD, Inc. All rights reserved

HE873_48 Small Lace Edged Border

n 1. Pattern/Placement ................0870n 2. Trim & Tack Down ................0870n 3. Lace & Linework ...................0870n 4. Berries ..................................1805n 5. Leaves ..................................5643n 6. Lace Edge ............................7011

HE874_48 Small Lace Edged Corner

n 1. Pattern/Placement ................0870n 2. Trim & Tack Down ................0870n 3. Lace & Linework ...................0870n 4. Berries ..................................1805n 5. Leaves ..................................5643n 6. Lace Edge ............................7011

HE875_48 Large Lace Edged Border

n 1. Pattern/Placement ................0870n 2. Trim & Tack Down ................0870n 3. Cover Sttich ..........................0870n 4. Gold Trim ..............................7011

HE876_48 Large Lace Edged Corner

n 1. Pattern/Placement ................0870n 2. Trim & Tack Down ................0870n 3. Cover Stitch ..........................0870n 4. Gold Trim ..............................7011

HE877_48 Mini Lace Edged Corner

n 1. Pattern/Placement ................0870n 2. Trim & Tack Down ................0870n 3. Cover Stitch ..........................0870n 4. Gold Trim ..............................7011

HE878_48 Star Accentn 1. Single Color Design ..............0870

HE879_48 Snowflake Accent

n 1. Single Color Design ..............0870

HE880_48 Star & Snowflake Corner

n 1. Placement Stitch - Any Color ..................................0020

n 2. Gold Trim ..............................7011n 3. Swirls ....................................1805n 4. Stars and Snowflake ............0870

HE881_48 Tree Accentn 1. Light Swirls ...........................7011n 2. Tree & Swirls ........................0870n 3. Star .......................................1805

HE882_48 Tree Bordern 1. Placement Stitch - Any

Color ..................................0020n 2. Gold Trim ..............................7011n 3. Tree, Swirls & Lace ..............0870n 4. Berries & Star .......................1805n 5. Leaves ..................................5643

HE883_48 Tree Cornern 1. Placement Stitch - Any

Color ..................................0020n 2. Gold Trim ..............................7011n 3. Tree, Swirls & Lace ..............0870n 4. Berries & Star .......................1805n 5. Leaves ..................................5643

HE884_48 Bell Accentn 1. Light Swirls ...........................7011n 2. Snowflakes, Stars & Bell ......0870n 3. Berries ..................................1805n 4. Leaves ..................................5643

HE885_48 Bell Bordern 1. Placement Stitch - Any

Color ..................................0020n 2. Gold Trim ..............................7011n 3. Swirls ....................................1805n 4. Bells and Stars .....................0870

HE886_48 Bell Cornern 1. Placement Stitch - Any

Color ..................................0020n 2. Gold Trim ..............................7011n 3. Swirls ....................................1805n 4. Bell and Stars .......................0870

HE887_48 Bell & Snowflake Border

n 1. Placement Stitch - Any Color ..................................0020

n 2. Gold Trim ..............................7011n 3. Swirls ....................................1805n 4. Bell, Stars & Snowflake ........0870

Listings below indicate color sample, stitching order and suggested Isacord thread color number

Yuletide Glitz Linens

of 1

Yuletide Glitz Linens #61046 Copyright OESD 2007

Bread Warmer Instructions

• The bread warmer is a blank from the company All About Blanks.• Choose one or more corners to be embroidered.• Fold the corner in half and mark the fold for the vertical center.• Measure from the point 3” to 3½” and mark the horizontal center.• Where these lines intersect will be the center of the embroidery.• Hoop one piece of Aqua Mesh Plus.• Remove the paper top to reveal the tacky surface.• Carefully place the bread warmer corner on the stabilizer.• Embroider the Christmas design of your choice. The sample used

#HE881-48 from #61046

of 2

Christmas Border Supplies:

• OESD Stabil-Stick Stabilizer• Isacord Polyester Embroidery Thread• Yenmet Metallic Thread

1. Hoop a piece of OESD Stabil-Stick stabilizer2. Score and remove protective paper from the stabilizer.

3. Put your hoop on the machine and stitch the first color. This is the placement line.


of 2

4. Remove the hoop from the machine. DO NOT remove the stabilizer fromthe hoop.

5. Mark the center of where you want this border to be on your item to beembroidered. Match the edge of the item to the alignment line stitched inStep 2 while lining the center with the center mark that stitched with youralignment line.

6. Place the hoop back on the machine and continue to stitch the corner. Checkthe rest of the napkin to keep it out of the stitching area. Continue stitching allthe colors in the design until finished.


of 2

Christmas Napkin Corner Use these instructions for the napkin corners without lace.

Supplies: • OESD Stabil-Stick stabilizer• Isacord Polyester Embroidery Thread• Yenmet Metallic Thread• Finished Napkin

1. Hoop a piece of OESD Stabil-Stick stabilizer2. Score and remove protective paper from the stabilizer.

3. Put your hoop on the machine and stitch the first color. This is the placement line.


of 2

3. Remove the hoop from the machine. DO NOT remove the stabilizerfrom the hoop.

4. Place the napkin corner on the stabilizer, matching the edge of thenapkin to the alignment line stitched in Step 2

5. Place the hoop back on the machine and continue to stitch the corner.Check the rest of the napkin to keep it out of the stitching area.Continue stitching all the colors in the design until finished. Tear or CutAway excess Stabilizer.


of 1

Christmas Table Runner

Fabric- 40” x 22” Combine designs using Explorations Software. Use the multi-hooping feature or use the Mega-hoop. Measure 4.5 inches from one end and 11 inches from one side and mark. This is the center of the embroidery. Embroider the two ends. Trim the fabric to 16” x 37”. Keep the embroidery centered when trimming. Place the lining and embroidered fabric right sides together add batting if desired. Stitch around on all four sides leave an opening to turn. Clip the corners and turn to the right side. Quilt and top stitch as desired. The designs used have a placement line to align if using a pre-made, purchased table runner. For this application the placement lines were not used.


Christmas Napkin Edge

Supplies: • OESD Badgemaster or Aqua Mesh Stabilizer• 505 Temporary Spray Adhesive• Isacord Polyester Embroidery Thread• Yenmet Metallic Thread• Finished Napkin

1. Hoop a piece of OESD Badgemaster stabilizer or OESD Aqua Meshstabilizer.

2. Stitch the first color. This is the placement line.3. Remove the hoop from the machine. DO NOT remove the stabilizer from

the hoop.4. Spray the wrong side of one corner of the napkin with 505 Temporary

Adhesive Spray.5. Place the napkin corner on the stabilizer, matching the edge of the napkin

to the straight part of the stitched line.


6. Put the hoop back on the machine and stitch the next color.7. Again remove the hoop but not the fabric.8. Trim the corner of the napkin close to the stitching line.

9. Place the hoop back on the machine and continue to stitch the cornerusing matching bobbin thread. Check the rest of the napkin to keep it outof the stitching area. Continue stitching all the colors in the design untilfinished.


of 1

Wash Cloth and Towel

Several of the designs have included placement lines to make it easy to have multiple items embroidered in the same exact place. The design # HE886-48 from Collection 3 and HE885-48 from #61046 were stitched on the towel and washcloth.

Hoop one piece of OESD Badgemaster. Choose the design and stitch the first color, this is the placement line. Lightly spray the stabilizer with 505 Temporary Spray Adhesive. Place the item along the stitched line. When using a towel or napped fabric use OESD Aqua Film Topping on the top of the item. Finish stitching the embroidery.


yuletide glitz linenspage 1 of 2 christmas napkin corner use these instructions for the napkin...

Documents