ziel apex 7 web - home - ziel · apex 7 medicinal plant processing system apex 7 is a revolutionary...
TRANSCRIPT
APEX 7Medicinal Plant Processing System
APEX 7 is a revolutionary product that can process medicinal plants for the reduction oftotal yeast and mold count (TYMC) without the use of any chemicals or other harmful means.
This system carefully controls RF power to provide multiple bene�ts for Cannabis.
The APEX 7 is a versatile, standalone processing system for leafy medicinal plants, offering a proven and economical approach for disinfection and disinfestation.
APEX 7 does more for Cannabis• Total yeast and mold count (TYMC) reduction
• Avoids adverse effect on terpene retention
• No use of harmful chemicals or ionizing radiation
• Is a non-oxidizing process
• Does not result in decarboxylation
• Minimal or no change in smell or color of treated product
• Can reduce the likelihood of mold growth during cure
• The RF process can also be used for moisture reduction or moisture reintroduction
• High electrical ef�ciency – low electrical power consumption
CATEGORY APEX 7 COMMENTS
RF Power 7 kW Represents available thermal load for processing
Suitable Products for Processing • Cannabis• Other similar leafy plants (subject to validation)
Primary Purpose for Processing • Total yeast & mold count (TYMC) reduction
Standard Baseline System • Standalone RF batch processing system• Fiber optic probes for real time temperature
monitoring and feedback for automatic process controls
• Aluminum/steel construction• Powder-coated• HMI/PLC Controls• Remote access for software update• Trays with lids (4 sets) for processing
Remote access requires customer provided internet connection
System Features • Fully automatic processing system• Touch screen based easy to use operator
interface/HMI • System controls done with PLC
Equipment purchase includes Operator Training per customer speci�c Operator’s Manual
Product Presentation • Loose product in trays with available lids for batch processing
Processing in select packaging possible. Will require additional testing and veri�cation
Processing Capacity • Typically between 3 to 20 lbs per batch
• Exact capacity may vary based on customer’s speci�c processing requirements
Can be spread in one or two trays side by side with a min & max bed height of 75 mm & 150 mm, respectively
Processing Time • Typically <10 minutes Actual processing time will depend on batch size, max target temperature, product moisture content and other parameters
Process Development • Up to 3 process recipes included with equipment purchase
Additional recipe development available at additional cost
Operating Environment • 20° C to 40° C• Sea level to 10,000 ft. above sea level• Relative humidity 10% to 90% non-condensing
environment
Life Expectancy • 20 years or more for major structural equipment, under nominal operating conditions
When maintained & operated per prescribed operating conditions
System Dimensions • 2800 mm (L) x 1520 mm (W) x 3110 mm (H)
Electrical Requirements • 480 VAC 3 Phase 60 Hz• Supply voltage must be stable within ±5%• Current 25 A
Codes & Standards • Adequate EMC shielding; FCC compliant• CE Mark• Design compliant with UL• CSA compliance (available option)
Optional Equipment • SCADA• All stainless steel construction• Additional trays with lids• Additional process recipes• Transformer to accommodate customer’s
alternative power availability
Site Requirements • Indoor location
• Well ventilated room
Warranty • 12 months for parts and labor
4641 Pell Drive, Suite 9Sacramento, CA 95838
Zielps.com
Phone: +1 (966) 623 4886Toll Free: +1 (888) 612 9895
APEX 7 Product Speci�cation Sheet