Introduction

1. ZJQ series slurry pump is a kind of submersible

slurry pump.

2.It is suitable for conveying liquid with solid of gravel,

cinders, tailings, etc.

3.It’s mainly used in metallurgical industry, mining,

coal-fired power plants, etc.

4. In addition to the main impeller, pump and increase a

paddle wheel at the bottom.Can spray the precipitation

of the sludge into turbulence, make the water pump

achieve high concentrations of transportation without

auxiliary device.

5.It adopts advanced technology to design and

manufacture, having long service life.

6.It is not limited by suction, and have efficiency in slag

suction, and clear silt more thoroughly.

7. Simple operation and easy to management.

8. Wear resistant wet parts: The wet parts are made of

hard metal (Chrome alloy).

9. Long bearing life: The bearing assembly is with large

diameter shaft and short overhang.

10 .It is the featured Products of our company.

11. Vertical centrifugal submersible slurry pump.

Application

1. The efficient Submersible Slurry Pump use motor and pump coaxial work together into

the water .

2. Suitable for conveying liquid containing sand, coal cinder solid particles.

3. Commonly used in metallurgy, mining, thermal power plant enterprises discharge slurry

removal and transportation etc.

Type Designation of ZJ slurry pumps

ZJQ 200—15- 22L

Additional Cooling Device

Matched Motor Power: 22Kw

Rated Head: 15m

Rated Capacity: 200m3/h

Structural characteristics and working principle

ZJQ typ submersible slurry pump is the pump and motor coaxial, work through the motor shaft

drives the pump impeller rotation, Transfer energy to the slurry medium, to produce a certain

velocity, drive the solid flow, implementation of slurry transportation.

Structural Features

1. The whole machine for dry motor pump structure. Motor adopts mechanical seal protection,

can effectively prevent the high pressure water and impurities into the motor chamber.

2. In addition to the mixing impeller, pump and increase a paddle wheel, can spray the

precipitation of the sludge into turbulence and be thrown out.

3. Impeller, mixing impeller, the main flow components adopt high wear-resisting material

manufacturing, wear resistance, corrosion resistance, no jam, sewage capability is strong, can

effectively through the larger solid particles.

4. Without being limited by the suction, suction slag with high efficiency, desilting more

thoroughly.

5. No need equipped with auxiliary vacuum pump, lower investment.

6. No equipped with auxiliary mixing or spraying device, easy operation.

7. Motor is underwater, without construction of complex ground protection and fixtures, manage

more easily.

8. Mixing impeller can directly touch the surface of deposition, through the depth control

concentration, and concentration control more easily.

9. Equipment directly work underwater, no noise and vibration, the scene is more clean and tidy.

Model Feature: Submersible Slurry Pumps

Performance

Installation Explanation

1.Power is 50 hz, 380 v three-phase ac power supply。

2. The highest temperature shall not be higher than 40 ℃，medium does not contain

flammable and explosive gas

3. Medium solids volume concentration was 30%, the largest largest medium density of 1.2

kg/l

4. Unit maximum diving depth is generally not more than 20 meters, minimum submergence

depth of the submerged motor shall prevail.

5.Unit with vertical work as well in the medium，the operation mode for continuous

operation.