*** CONFIDENTIAL ***© Toshiba Corporation 2008 Confidential

Wallboards

Wallboards

In this sessions you will learn how to:

Install a wallboard driver

Configure a wallboard

Send messages to a wallboard

Installing a wallboard driver

Firstly select Wallboards from the Menu bar and then select Driver from the options available.

Then select a Wallboard Type and a

Serial port to use to drive the wallboard

Click OK

Configuring a Wallboard

Now select Wallboards from the Menu bar and then select Configure

from the options available.

Configuring a Wallboard

The first step is to create templates which can then be added to a

schedule.The schedule can then

be applied to the wallboard

Configuring a Wallboard

Here you can either edit an existing

template or create a new one based on an

existing template.Edit existing by selecting it and

clicking Change or type in a new name and click the Add

button

Configuring a Wallboard

Here you can either edit an existing

parameters or add a new one or delete

existing ones according to your needs

Configuring a Wallboard

To add a new parameter click the

Add Item button

Configuring a Wallboard

Now you can add a new Parameter, a new

Label or a new Message depending on

your requirements

Configuring a Wallboard

Once you have added a parameter or to edit an

existing parameter click the Edit button

Configuring a Wallboard

Now you can select the Device Type and Device Name to

display

Configuring a Wallboard

Select the Parameter to display from the drop

down list box.As a simple rule, any parameter available as

a large character window is available

making over 700 available

Configuring a Wallboard

To manually configure where the text will

appear on the wallboard you can

position and justify the text and chose large or

small font.Click OK to repeat the

process

Configuring a Wallboard

The next step is to create a schedule

containing templates.The schedule can then

be applied to the wallboard

Configuring a Wallboard

Here you can either edit an existing

schedule or create a new one based on an

existing schedule.Edit existing by selecting it and

clicking Change or type in a new name and click the Add

button

Configuring a Wallboard

Here you can either edit an existing

templates or add a new one or delete existing

ones according to your needs

Configuring a Wallboard

To add a new template simple select from the list box and select the amount of time you

want the template to be visible before scrolling

to the next one

Configuring a Wallboard

When you are finished click OK and then

Close and Close again.

Configuring a Wallboard

The final step is to apply the schedule to

the wallboard

Configuring a Wallboard

Make sure the Fitted check box is checked

or the wallboard is disabled.

The Alarm is Audible check box controls

whether any parameters on the

wallboard, which can be alarmed will trigger

the audible alarm

Sending Messages

Click on the Messaging Icon on the toolbar or

Messaging from the Menu bar

Sending Messages

Here you can type in new message and then add it to the message library or click the

arrow and select from previously configured

messages

Sending a Message

In this area you select the wallboard to

message if there are more than one along

with the duration. Zero will fix the message in

place.Finally Beep will make an audible alert when

messaging