rivrkit.doc - rivrkit · fret- , so the end hangs over the edge of the wood just 1/ 16" board...

14

Upload: others

Post on 27-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 2: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 3: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 4: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 5: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 6: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 7: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 8: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 9: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 10: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 11: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 12: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 13: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)
Page 14: RivrKit.doc - RivrKit · FRET- , so the end hangs over the edge of the wood just 1/ 16" BOARD or so. Position the FRETWIRE so the "tang" will be driven down into the fret slots. c)