trendytechjournals.comtrendytechjournals.com/ttm.docx · web viewproposal submitted to the...

CURRICULAM VITAE

Dr.TTM.Kannan

Contact Number9865486220

8610650346

Whatsapp Number

8610650346

Email ID

[email protected]

[email protected]

Address for Communication Dr,TTM.Kannan, S/o TT.Mahadevan, M-82,Phase-I, Housing Unit, Annanagar, Trichy-620 026 Tamilnadu, India

Personal ProfileDate of Birth : 11.02.1973Gender : Male

Religion : Hindu

Nationality : Indian

Marital Status : Married

Children : 1

Spouse name : K.TamilSelvi

Languages known : Tamil, English

Blood Group : B +

Aadhar Number :5762 0027 03273

PAN Number : BBBPK1143D

Voter Id : KFS5556253

Objectives To work as an enthusiastic hardworking professional in a

competent environment that enables me to widen my research knowledge

with emerging trends in technology.

Academic Chronicle

Course Institution/University Year of passing

Marks obtained

Ph.DMechanical Engineering

PRIST UNIVERSITY

Thanjavur2017 Commended

M.TechManufacturing

Technology

PRIST UNIVERSITY

Thanjavur 2012

9.13First class

with distinction

AMIEMechanical Engineering

The Institution of Engineers

(India)Kolkata

20097.13

First class

DiplomaMechanical Engineering

Srinivasa PolytechnicKeeranur

199264.16

First class

HSCGeneral

Machinist

B.H.H.S.SchoolTrichy

199076.5

First class

SSLCB.H.H.S.SchoolTrichy

198867.4

First class

High lights1. 6 Patents filed and Published in IPR-Chennai2. 2 Research Fund received and completed3. 53 Research articles are published4. 19 Conference papers are published5. Research Supervisor in PRIST UNIVERSITY6. Board of Study member in PRIST UNIVERSITY7. 7 Professional memberships in professional body8. Project Guide in AMIE Examinations9. 1 Technical book (ISBN) is published10. 2 Book chapter (ISBN) is published11. 2 Keynote address in Seminar /lecture program/ Workshop

CURRICULAM VITAE

Professional Experience

Associate Professor - Mechanical Engineering in M.A.M. School of Engineering, Trichy, From 28.06.2017 to Till Date

Associate Professor - Mechanical Engineering in Indra Ganesan College of Engineering, Trichy, From 02.05.2016 to 27.06.2017

Assistant Professor - Mechanical Engineering in PRIST UNIVERSITY, Thanjavur, From 01.07.2014 to 13.04.2016

Assistant Professor - Mechanical Engineering in Pavender Bharathidasan Institute of Information Technology, Trichy, From 06.05.2013 to 17.04.2014

Assistant Professor - Mechanical Engineering in JJ college of Engineering and Technology, Trichy, From 02.01.2012 to 30.04.2013

Lecturer –Mechanical Engineering in Musiri Institute of Technology, Musiri, From 12, 11.2008 to 12.08.2010

Research Fund received from Funding agencies

Name of the Funding Agency

Amount Received

Title of the Project Status of Project

The Institution of

Engineers(India)

Kolkata.

Rs 50,000 Implementation of Micro

factories in Mechanical

Industries.

Project Completed

On March 2014.

The Institution of

Engineers(India)

Kolkata.

Rs 50,000 Development of MEMS

based Pocket Factory for

Sustainable

Manufacturing System.

Project Completed

on April 2017

Google Scholar Citation index

Citation Index H index I 10 index

41 4 -

Title of PhD Thesis: Development of portable tabletop micro factory for

sustainable manufacturing system

Research Fund applied

CURRICULAM VITAE

1. Proposal submitted to Tamilnadu State Council for Science and Technology

(TNSCST) to Student project fund scheme (Rs 20,000), Development of

Mems based Micro machinetools. August 2017.

2. Proposal submitted to Tamilnadu State Council for Science and Technology

(TNSCST) to student project fund scheme (Rs 20,000). Development of

Plastic lathe for Micro components. August 2017.

3. Proposal submitted to The Institution of Engineers - Kolkatta (Rs 30,000) to

organize second International conference on “Recent advances in Engineering

and Technology (ICRAET-2018), November 2017.

4. Proposal submitted to AICTE-Short term training program on Advances in

manufacturing processes,(Rs 4,50,000),November 2017

5. Proposal submitted to The Institution of Engineers (India) Kolkatta (Rs

50,000) to Student Project fund scheme. Development of Nano Factory for

Sustainable Manufacturing system, December 2017.

Awards and Recognition

4. Received “Best paper Award and Cash award” from International Journal

of Trendy research in Engineering and Technology, March 2018.

3 Received “Certificate of Excellence Award” for outstanding contribution to

journal publications form International journal of innovative research in

Science and Technology in Nov-2017. (Certificate serial no 15).

2. Received “IG RESEARCH AWARD” for published research article in peer

reviewed journal during the academic year 201-2017 in Indra Ganesan collge

of Engineering, Trichy.April 2017.

1. Received participation certificate in Assist world record in Pavendar

Bharathidasan Institutions in the awareness program on “Save nature to

combat global warming” in Human Banyan Tree program on 05.10.2013.

PATENT

CURRICULAM VITAE

Inventors Name Title of

Invention

Application

Number

Date of

Filing

Status of Patent

TTM.Kannan

&

Dr.P.Marimuthu

Non Automatic

table top portable

lathe

5040/CHE/2013

&

IPR office

Chennai

08.11.2013

Journal Published

&

Waiting for

Examination.

Dr.P.Marimuthu

&

TTM.Kannan

Tabletop Portable

Mini friction

welding for

miniature of

welded joints

371/CHE/2015

&

IPR office

Chennai

27.01.2015 Journal Published

&

Waiting for

Examination.

Dr.S.Bharathi

Raja

&

TTM,Kannan

Development of

Micro leaf jig for

Micro

Components

201641043779

&

IPR office

Chennai


&

Waiting for

Examination.

Dr.P.Marimuthu

&

TTM.Kannan

Development of

Mini surface

grinder

201741006964

&

IPR office

Chennai


&

Waiting for

Examination.

Dr.P.Ranjith

Kumar

Dr.TTM.Kannan

Dr.K.Chandra

Sekaran &

R.Ramanathan

Acrylic open type

micro drill jig

201741027566

&

IRP office

Chennai


&

Waiting for

Examination

Dr.P.Ranjith

Kumar

Dr.TTM.Kannan

Dr.K.Chandra

Sekaran

Automation in

Micro turning

process using

sensitive

controlled motor

201741046967

&

IRP office

Chennai


&

Waiting for

Examination

Professional Memberships

CURRICULAM VITAE

Professional society Membership grade Membership Number

Indian Society for Technical Education, (ISTE) -New Delhi.

Life member LM 28606

The Institution of Engineers-India

(IEI)-Kolkata

Associate member AM 138262-7

International Society for Research and Development (ISRD)- UK

Fellow Member F 3140900961

International Association of Engineers (IAENG)-

HONG KONG

Associate member AM164877

Institute of Research Engineers & Doctors (IRED)-USA

Associate member AM 10100058512

Institute for Engineering Research and Publication (IFERP)-India

Member M-17319485

International Academy for Science and technology education and

research (IASTER)-India

Member M-16060150

BOOK Publication

3. Title of Book: Introduction to Mechanical Engineering (ISBN -978 -93-

84443-49-8 ) Chapter 12 – Experimental investigation and design optimization of

roundness error of micro drilling process on AISI 316 sheets.

Authors: Dr.TTM.Kannan, Dr.P.Ranjith Kumar, Dr.K.Chandrasekaran,

R.Ramanathan and PM.Ramulingam, Publishers: Research India Publications,

Publication date : 30.03.2018

2. Title of Book: Development of MEMS based Pocket factory for Sustainable

Manufacturing (ISBN -978 620 2 01535-6),

Authors: Dr.TTM.Kannan, Dr.P.Ranjith Kumar and Dr.K.Chandrasekaran

Publishers: Lambert Academic Publishing-West Germany.Publication date :

28.08.2017

1. Title of Book: Emerging Trends in Science, Engineering and Technology

(ISBN-978 81 322 1007 8)

CURRICULAM VITAE

Book Chapter: Design and Development of Non Automatic Tabletop Mini Lathe

(PP- 157-164),

Authors: TTM.Kannan, Dr.P.Marimuthu

Publishers: Springer – India, Publication date : December 2012

Key note address /Conference / Lecture /Presentation in National

seminar and Symposium

1. Lecture on “Mems based Pocket factory for Sustainable manufacturing

system” in Institution of Engineers-Trichy Local chapter - BHEL on

21.02.2017.

2. Lecture on “Micro factory for Sustainable Manufacturing system” in

Institution of Engineers –Trichy local Chapter –BHEL on 24.05.2016.

Organizer in Conference / FDP/Seminar /Symposium

6. Program coordinator in One day workshop on Modern NDT Techniques on

19.01.2018 at M.A.M. School of Engineering, Tiruchirapplalli.

5 .National Advisory Committee member in IFERP organized International

conference on Recent advancements in information, Technology, Science and

Engineering, Conduted by Sengundhur Engineering college,Erode on 16.03.2018

4 .National Advisory Committee member in IFERP organized International

conference on Recent advancements in information, Technology, Science and

Engineering, Conduted by APC Engineering College, Thothugudi on

14,15.12.2017.

3.Session Coordinator in Bio energy and Bio fuel in International conference on

Power, control, Signals and instrumentation Technology (ICPCSI

2017),Conducted by Saveetha Engineering college, Chennai on 21,22-09.2017.

2. Organizing Secretary in Second International conference in Recent advances

in Engineering and Technology (ICRAET-2018) conducted by M.A.M.School of

Engineering,Trichy on 29,30.01.2018

CURRICULAM VITAE

1.Organizing Secretary in Faculty Development Programme on ‘A Guide to

beginners in research” conducted by Indra Ganesan college of Engineering,

Trichy on 07.01.2017

Reviewer and Editorial Board Member1. Editorial Board in Journal of Mechanical and Production

Engineering (JMPE) –Scopus Indexed

2. Reviewer in Journal of the Serbian Tribology society – Scopus

Indexed

3. Reviewer in International journal Engineering research and technology

(IJERT),Register Number : IJERTREW1313.

4. Reviewer in International journal of Engineering Trends and

Technology (IJETT), Id: SSRGY-IJETT-1299.

5. Reviewer in Advances in Engineering Research (IJAER), Id:

IRA/ENGG/9979.

6. Reviewer in International journal of research in science and

Technology (IJRST),Id : IRA/ENGG/9979.

Publications in National / International Journals

53. TTM.Kannan, P.Ranjith kumar, R.Ramanathan. K.Chandra sekaran Alignment

test on Portable Tabletop Mini lathe. Journal of manufacturing Engineering,13,

2018,pp 59-62

52. P.Ranjith kumar,K.Chandra sekaran,TTM.Kannan and R.Ramanathan

Automation in micro turning process using sensitive controlled motor, The patent

office journal ,Issue 01/2018,(2018), pp 78.

51.TTM.Kannan,K.Chandra sekaran,R.Ramanathan and S.Suriya Fabrication of

optimization of Mems based micro grinder, International journal of Engineering

research in Mechanical and Civil Engineering,2,12,(2017),pp 97-100.

50.K.Chandra sekaran, TTM.Kannan, R.Ramanathan and P.Ranjithkumar Taguchi

and response surface methodologies engaged for surface roughness in CNC turning

AISI 316 by multi layered coated tool, Journal of Manufacturing

Engineering,12,2017,pp235-240

CURRICULAM VITAE

49. Muhammed shihan,J.Chandra dass, M.Senthil kumar and TTM.Kannan,

Experimental Investigation and design optimization of Face milling parameters on

Monel K -500 Using DOE concept, International journal of Mechanical and

production Engineering Research and Development,7,2017, pp 403-410.

48. P.Ranjith kumar, TTM.Kannan,. K.Chandrasekaran, and R.Ramanathan, Acrylic

open type micro drill jig, The patent office journal, issue 33/2017,18.08.2017,pp

26886.

47. Dr.P.Marimuthu and TTM.Kannan Development of Mini Surface grinder, The

patent office journal,07.04.2017,pp 9128.

46. TTM.Kannan, P.Vijaya Kumar,M.Ganesan and A.Pulidevan Evaluation of axial

shortening of friction welded joints of EN-24 and ETP copper cylindrical rounds

using DOE concepts. Journal of Manufacturing ,12, 2017,pp 33-36.

45. TTM.Kannan,R.pavendhan,R.Ajith and S.Yuvasri Design Optimization of

drilling process parameters of EN-24 steel plates using DOE. Transactions on

Innovations in Science and Technology,1.2016,pp 60-64.

44. Dr.S.Bharathi Raja and TTM.Kannan Development of Micro leaf Jig for Micro

Components,The patent office Journal,30.12.2016,pp -76945

43. TTM.Kannan, M.Samuel, P.GuruPranesh Design and Optimization of portable

Tabletop moulding machine process parameters using DOE concepts, International

right path journal of Science,Engineering and Technology, 1.(2016),pp 8-12.

42. J.Ganesh,P.Renuga devi, P.Vijayakumar and TTM.Kannan Optimzation of

drilling process parameters on Die steel (H-13) using carbide coated drill by Design

of Experiment concept, International Journal of Advanced Engineering research and

science,3,(2016),pp 71-76.

41. S.Giridharan,TTM.Kannan and K.Balamurugan Experimental Investigation and

Analysis of dissimilar welding of AISI316L and IS2026 using GTAW, International

Journal of Advanced Engineering research and science,5,(2016),pp 11051-11058.

40. TTM.kannan, P.Vijaya kumar, Mohamed Fayiz and Prasanna.E Experimental

Investigation of Micro spot welding process parameters on different materials by

DOE concept,3, (2016),pp 565-570.

CURRICULAM VITAE

39. S.Desigan, V.Kalaiyarasan,TTM.kannan and P.Vijaya Kumar Heat Analysis of

PTFE plates on drilling process by ANOVA methodology, International journal of

Engineering trends and technology,3,(2016),pp 271-274.

38. S.Desigan,V.Kalaiyarasan,TTM.Kannan and P.Vijaya kumar Analysis of

Surface roughness of PTFE plates on drilling process by ANOVA methodology,

International Journal of Innovative Research in Science and Technology,5,2016,pp

48-54.

37. TTM.Kannan.Giridharan and V.Surendiran,S Study and overview about Walking

robot for complex environment, International Journal of Applied Engineering

Research,11.(2016),pp 393-396.

36. S.Jagadeesh Sridhar,TTM.Kannan,R.Baskaran and S,Giridharan Experimental

Investigation on machining time of Cylindrical grinding process on OHNS (AISI-

O1)steel round rounds using ANOVA, Journal of Manufacturing Engineering, 11,

(2016),pp 35-40.

35. TTM.Kannan, I. Justin Anthony and P.Vijaya kumar Design Optimization of

turning parameters of PTFE (Teflon) cylindrical rods using ANOVA methodology,

International journal of Applied Engineering research, 11.2016,pp 518-525.

34. P.Marimuthu, TTM.Kannan and S.Saravanan Experimental Investigation and

Design optimization of Micro drilling process parameters of Austenitic Stainless steel

(Aisi 316) sheets by Doe concept, Journal of Mechanical and Civil Engineering ,12,5

(2015), PP 24-28.

33. R.Hari Krishnan,TTM.kannan,P.Vijayakumar and S.Giridharan Evaluation of

Mechanical Properties of Aluminium metal matrix composites,International journal of

research in mechanical Engineering,3,(2015),pp14-18.

32. C.Sundar,P.S,Manian, S.Saravanan and TTM.Kannan Experimental

Investigation and Process parameter study of Friction Stir welding of AA 8011,

International Journal of Mechanical Engineering research and Technology,1,

(2015),pp

31. Viswanathan.G, TTM.Kannan, M.Abdul Ghani Khan and J.Chandra dass

Optimization of Mechanical properties of Friction welding parameters of Austenitic

CURRICULAM VITAE

Stainless steel(AISI-316)rods using Design of experiments concept, Journal of

Manufacturing Engineering,2015 , 2,PP 91-96.

30. TTM.Kannan,K.Bhuvanesh.S.Giridharan and P.Vijayakumar Optimization of

Boring parameters of AISI410 by Design of Experiment concept” International

journal of Applied Engineering Research, 10,(2015), pp523-527.

29. P.Marimuthu,TTM.Kannan,K.Sabariesan and P.Vijayakumar Experimental

Investigation of Uncoated cemented carbide tool Insert during turning process of EN-

19 steel by regression Analysis, International journal of Applied Engineering

research, 10, 3(2015),pp 2442-2445.

28. M.Melwin jagadeesh Sridhar,TTM.Kannan,V.kalaiyarasan and R,Baskaran Heat

generation Analysis and process parameters optimization of Cylindrical grinding on

OHNS (AISI 0-1) steel rounds, International journal of Applied Engineering research,

10,3(2015),pp 2442-2445.

27. P.Marimuthu and TTM.Kannan, Development of Tabletop micro factory for

Sustainable manufacturing system, International journal of Applied Engineering

research, 10,3(2015),pp 2446-2449.

26. P.Marimuthu and TTM.Kannan, Optimization of Friction welding parameters of

AA6082 miniature of Welded joints, International journal of Applied Engineering

research,10,15 (2015),pp 12174-12181.

25. P.Marimuthu,TTM.Kannan and G.Balaji Evaluation of Hardness and Tensile

strength of Micro spot welded joints on different materials” International journal of

Applied Engineering research, Volume 10, 3, (2015),pp12174-12181.

24. Reegan C, R Tamizh Selvan, T T M Kannan, R Baskaran, P Vijaya kumar,

Product Analysis and Stress Analysis of Process Piping Routing by Using CEESAR-

II, International Journal of Mechanical Engineering and Robotics Research,

4,2015,154-161.

23. Hussain lal.A., TTM.Kannan.,S.Giridharan., M.Suresh Kumar, Experimental

analysis on Deformation of 6061-T6 Aluminium bracket using Finite Element

Analysis, Journal of Manufacturing Engineering, 10,1,2015, pp

CURRICULAM VITAE

22. Nedumaran.K., Baskaran.R., Kannan, TTM. and Vijaya Kumar, P, Optimization

of Ball end milling parameters of AISI316 steel using ANOVA

Methodology,International journal of Information Research and review, 2,3, 2015,pp

21. A.Muhammed shihan,J.Chandra dass,TTM.Kannan, Experimental Investigation

of heat exchanger performance with Aluminium and copper micro parts, International

journal of research in mechanical Engineering,3,1, 2015.pp

20. P.Marimuthu and TTM.Kannan , Table top Portable Mini friction Welding

machine for Miniature of welded joints, The Patent Office Journal 30.01.2015.,(Issue

No 05/2015),Page no:22220.

19. M.Melwin Jagadeesh Sridhar,M.Manickam,TTM.Kannan,M.Abdul Ghani Khan

Optimization of cylindrical grinding process parameters of OHNS(AISI-01)rounds

using design of Experiments concept, International Journal of Engineering Trends and

Technology,3,2014, pp109-114.

18. S.Prathiban,M.Manickam,TTM.Kannan,P.Renukadevi “Effect of Aerofoil

thickness over pressure distribution in Wind turbine blades” International Journal of

Mechanical Engineering and Robotics Research. Volume 3, October 2014,Pages 564-

572.

17. G.Samuthiram,TTM.Kannan,M.Sureshkumar,V.Ananda Natarajan Evaluation of

Mechanical Properties of Friction welded joints of EN-24 Steel cylindrical rods,

International Journal of Mechanical Engineering and Robotics Research, 3, 2014,pp

417-421.

16. M.Saravana Kumar, TTM.Kannan, S.Giridharan and P.Vijayakumar

Optimization Micro milling parameters of AL-6082 by ANOVA

methodology,International Journal of Mechanical Engineering and Robotics

Research, 3,2014,pp 378-382.

15. M.Sundeep,M.Sudhahar,TTM.kannan,S.Gridharan Optimization of Drilling

parameters on Austenitic stainless steel(AISI 316) using Taguchi methodology,

International Journal of Mechanical Engineering and Robotics Research, 3,

2014,pp388-394.

CURRICULAM VITAE

14. R.Ramya,TTM.Kannan,S.Giridharn and R.Baskaran Optimization of Turning

parameters of EN-8 steel cylindrical rods using Taguchi methodology, International

Journal of Mechanical Engineering and Robotics Research,3,2014,pp 360-366.

13. N.Muthukrishnan,TTM.Kannan,J.Madhan,P.Vijayakumar Optimization of

Turning parameters of OHNS(AISI-01) steel rods using Taguchi methodology,

International Journal of Mechanical Engineering and Robotics Research,

3,2014,pp346-352.

12. S.Giridharan,TTM.Kannan,P.vijayakumar and S.Sunil kumar, Study and

overview about process Failure mode and effect Analysis on Automotive Timing

Chain” International Journal of research in Mechanical Engineering, 2,2014,pp 11-18.

11. K.Bhuvanesh,S.Giridharan,TTM,Kannan,P.vijayakumar Optimization of drilling

parameters of EN-8 steel plates using Taguchi Methodology International Journal of

research in Mechanical Engineering,2,2014,pp11-18.

10. P.Marimuthu and TTM.Kannan, Non Automatic Tabletop Portable Minilathe,

The Patent Office Journal 30.05.2014.,(Issue No 22/2014),pp14589.

9. TTM.Kannan,K.Mekala.J,Chandra das, K.Chandrasekaran, E.Ramesh and

R.Narasing babu, Optimization of Cylindrical grinding Parameters of Austenitic

stainless steel rods (AISI 316) by Taguchi Method, International Journal of

Mechanical Engineering and Robotics Research,3,2014,Pages 1-8.

8. TTM.Kannan,R.Rajasekaran,M.Ganapathy,B.Ashok and B.Shiva Pragash.,

Experimental Investigation of Heat partition, Tool wear in Hard turning of AISI 316

steel using cBN cutting tool insert, International Journal of Mechanical Engineering

and Robotics Research,3, 2014,pp34-41.

7. S.Nizam sadiq, T.R.Raguraman,D.Thresh Kumar and TTM.Kannan, Optimization

of Milling parameters of OHNS steel using TiAlN coated cutter by Design of

Experiment Technique, International Journal of Mechanical Engineering and Robotics

Research, 3,2014, pp285-291.

6. S.Pungaiya, R.Ashok raj, and T.T.M.Kannan. Study and development of new

portable Refrigerator Kit for Medical Application, International Journal of

Mechanical Engineering and Robotics Research,2,2013,pp 315-319.

CURRICULAM VITAE

5. TTM.kannan, A.Hussain lal, M.Ganesan and R.Baskaran, Study and Over View

about Molecular Manufacturing system International Journal of Mechanical

Engineering and Robotics Research,2, 2013, pp193-210.

4. R.Ashok raj, T, parun, K.Sivaraj and TTM.Kannan, Optimization of milling

parameters of EN-8 using Taguchi Methodology, International Journal of Mechanical

Engineering and Robotics Research,2,2013. pp 202-208.

3. TTM.Kannan and P.Marimuthu, Design and development of Non Automatic

Table Top mini lathe, Lecture Notes, Springer, 2012,pp157-164.

2. TTM.Kannan, M.Ganesan, R.Baskaran &S.karthikeyan Studying Machinability

characteristics of maraging steel During Turning Using cBN and TiAlN., National

Journal of Engineering Today.7,2011,pp 35-42.

1. TTM.Kannan., M.Dharmendra and N.Parthipan Solid state refrigeration system,

National Journal of Engineering Today,2010,pp 137-140.

Publications in National / International Conference

19.TTM.Kannan and K.Thirumavalavan,Optimization of End milling

process on H-13 Die steel using ANOVA (ICNECT-2K18)

18. TTM.Kannan and R.Prabhaharan, Study of Hardness testing in Friction welding

process of ETP copper and EN 24 steel cylindrical rods (ICIETS -2018)

17.TTM.Kannan, R.Chandradass and Muhammed Shihan Optimization of milling

process parameters of Monel K-500 by ANOVA (ICRAITSE-17).

16. TTM.Kannan, R.Ramanathan and K.Chandrasekaran and S.surya Fabrication of

MEMS based Micro grinder.(ICRAITSE-17)

15.TTM.Kannan,P.Ranjith kumar,R.Ramanathan and Rajeswaran Study, overview

and implementation of MEMS based Micro factory for Sustainable manufacturing

system in 2020 (ICRAITSE-17).

14. TTM.Kannan and S,Desigan Analysis of surface roughness of PTFE plates on

drilling process by Anova,(NCIIME-2016).

13. TTM.Kannan,K.Bhuvanesh.S.Giridharan and P.Vijayakumar Optimization of

Boring parameters of AISI410 by Design of Experiment concept (TIME-2015),

CURRICULAM VITAE

12. TTM.Kannan and P.Marimuthu Development of Portable table top micro factory

for Sustainable manufacturing system, International conference on Advancements in

Engineering and technology-2015(ICAET-15)

11. TTM.Kannan and P.Marimuthu Optimization of Friction welding parameters of

AA 6082 miniature of welded joints, National conference on innovation and

Advances in mechanical engineering 2015(NCIAME-15).

10. C.Saravanan and TTM.Kannan Design and Fabrication of portable Tabletop

Friction welding machine for Miniature of components, National conference on

wireless networks Robotics and renewable Energy-2015(NCWRR-15).

9. TTM.Kannan Clean coal and carbon Capture and storage technologies, Trec step

BHEL (2013).

8. P.Marimuthu and TTM.Kannan Design and development of Non automatic table

top mini lathe” International conference on Emerging Trends in Science, Engineering

and technology,(INCOSET2012).

7. S.Palanisamy, M.Ganesan M.Chandra sekar and TTM.Kannan Design and

Development of Solar Desalinator, National conference on Innovations in Machinery

and structure,(INOMAS-2012)

6. K.Chandra sekar, S.Palanisamy, N, Bagath Singh, TTM.Kannan Evaluation of

Mechanical properties of bonded joints on sheet metal is seaming joints, National

conference on Innovations in Machinery and structure ,(INOMAS-2012).

5. P.Subramani, V. Ravi chandran, c.Vivek kumar and T.T.M.Kannan Optimization

of machining performance during turning of valve steel Using Taguchi Method,

National conference on Innovations in Machinery and structure, (INOMAS-2012).

4. TTM.Kannan and N.Parthiban Solid State refrigeration system,(RIME-2011)

3. TTM.Kannan,N.Parthipan, M.Dharmendra,&A.Annasamy Optimization of cutting

tool parameters during turning of maraging steel, International conference of design

and advances in Mechanical Engineering,(ICDAAME-2011).

2. TTM.Kannan and Partiban Studying machinability characteristics of maraging

steel during turning process using cBN and TiAlN coated tool insert,( TAME-2012)

CURRICULAM VITAE

1. TTM.Kannan and N.Parthipan Recent cutting tool materials” National conference

on Recent advances in manufacturing and Materials,(NCRAM-2011).

Workshop/FDP/Seminar attended

5. Participated one day Faculty development program on “A Guide to beginners in

Research” on 07.01.2017, organized by Indra Ganesan college of Engineering,

Trichy.

4. Participated one day workshop on“ Modern NDT methods” on 30.01.2014,

Organized by Pavendar Bharathidasan Institute of information technology, Trichy.

3. Participated one day workshop on “Product design Analysis using Hyper mesh” on

04.04.2012, organized by KLN college of Engineering, Madurai.

2. Participated one day workshop on “Recent trends in NDT testing” on 26.09.2012

organized by JJ college of Engineering, Trichy

1. Participated one day workshop on “Research methodology” on 22.10.2011

organized by JJ College of Engineering and Technology. Trichy

Declaration:

I hereby declare that all above furnished details are true and

correct to best of my knowledge and belief.

Date:

Signature

Place: Trichy Dr.T.T.M.Kannan

trendytechjournals.comtrendytechjournals.com/ttm.docx · web viewproposal submitted to the...

Documents