002. as micromax-soc bs
TRANSCRIPT
Introduction to AS MicroMAX-SOC
Connecting The World
24 October 20062
WiMAX Product Portfolio – A Microcellular Solution
MicroMAX-SOC Bstn.
Reference: 605-0000-741 & 742 MicroMAX-SOC Overview and HW Installation
24 October 20063
Full WiMAX SolutionFull WiMAX Solution
IP CoreNetwork
PSTN / Voice Network
V5.2 or GR.303
IP
Softswitch
IP or E1
IP Backhaul
Macro/HiperMAX
MicroMax-SOC
EasyST
ProST
SIP orMGCP
Microcell
MacrocellIP Backhaul
ProST
24 October 20064
MicroMAX-SOC SiteMicroMAX-SOC Site
Base Station with one layer of BSRs
The MicroMAX-SOC is a stand-alone Base Station combining Antenna, Radio & Base-band Modem in a single Enclosure.
24 October 20065
Main Features Main Features
• Outdoor unit (ODU):– MicroMAX-SOC Base Station Radio (BSR)
• Indoor unit (IDU):– SDA-4S Type-II: small low cost IDU with built in LAN
– SDA-4SDC Type-II: small low cost DC IDU with built in LAN switch
• IDU/ODU connectivity:– CAT 5e (24 gauge or better) cable (22 Recommended)
– Fast Ethernet: 4 pins
– -48v DC power: 2 pins
– For BSR FDD up to 100 meters
• Minimum configuration:– SDA-4S Type-II and a single BSR
• Larger configurations:– N * SDA-4Ss and N*BSRs
BSR
SDA-4S
Smallest BS
24 October 20066
Why MicroMAX-SOC?Why MicroMAX-SOC?
• Based on the latest wireless technology ( )
• ‘Pay as you GROW’– Low entry price
– Ideal for rural and CCTV applications
– Ideal to provide ADSL / CATV complementary services
• Full flexibility for the operator:– BSR redundancy
– SDA redundancy
– Using different types of sectors (60 degree, 120 degree, 360 degrees etc)
24 October 20067
MicroMAX-SOC uses SequansMicroMAX-SOC uses Sequans
• Based on Sequans System on a Chipset (SOC)
• Can support up to 28 MHz channels (full duplex)
• Potential for growth
• SOC initially optimised for IEEE802.16-2004
– 2nd phase will include an optimised 16e
• SOC engine enables the MicroMAX-SOC to provide best cost/performance
24 October 20068
MicroMAX-SOC Key FeaturesMicroMAX-SOC Key Features
• Integrated antennas:– Encased ODU with Integral antenna
– Typically 60 degree antenna
– Low cost and easy installation
• External antennas:– Third-party High gain antennas
– Sectorisation:
• 30, 60 (High gain),
• 90, 120, 180, 360 (0mni)
• SNMP management (Netspan)
• WEB management
• Configuration File
• RF Band:– 3. 5 GHz FDD (Full Duplex!)
– Tx power in 64QAM3/4: 27 dBm in 3.X GHz
• Based on:– Field proven mechanics / physical
design
– Sequans chipset
• ODU– Powered from indoor SDA
NOTE: An SOC with an “N”
type port for a third-party external antenna does not provide a built-in antenna
24 October 20069
Features & CapabilitiesFeatures & Capabilities
• The BSR supports a variety of features and capabilities that are defined as mandatory or optional
– Adaptive Modulation and FEC – 7 Burst Profiles• 64QAM 3/4, 64 QAM 2/3, 16 QAM 3/4, 16 QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 1/2
– Spectrum: 3.4 – 3.6 GHz, 3.5 / 1.75 MHz channels• 3.5GHz FDD Low (3.5F1) UL 3400 to 3452MHz
• 3.5GHz FDD High (3.5F1) UL 3450 to 3500MHz
– Security• DES encryption (3-DES for keys)
• AES encryption (Roadmap)
– Uplink Sub Channelisation
– Packing and Packet Header Suppression (PHS)
– PMP: up to 256 CPEs per BSR
– Networking:• Transparent Bridging – 4,000 entries in LAN tables of BSR
• VLAN tagging/un-tagging – up to 512 VLANs – currently VLAN pass through supported only. (Rel.3.0 will provide additional support)
24 October 200610
Features & Capabilities (Contd.)Features & Capabilities (Contd.)
• QoS and Bandwidth Management– Packet Classification – Based On:
• Source/Destination IP Addresses
• Source/Destination MAC Addresses
• Protocols and Applications
• 802.1Q/p, DiffServ/TOS
– nrtPS, BE – as defined by IEEE802.16-2004
– UGS, rtPS – (Not currently supported)
– CIR / MIR
– CIR Proportional Degradation:
• In case of CIR overbooking each CPE gets k*CIR (k is overbooking factor)
• FDD Full Duplex BTS– Full Duplex BSR
– Half Duplex SS
• Dynamic Frequency Selection - DFS
24 October 200611
BSR Redundancy – Using SDA-4SBSR Redundancy – Using SDA-4S
BSRs with different channels cover the same / overlapping areasIn case BSR or link to BSR drops – the other BSR will be used Load sharing – all BSRs are active
FailedBSR
SDA
ProST
ProST
SDA
“Standby” BSR
EasyST
SDA-4S
IP Router
X
IP Network
24 October 200612
Base Station ConnectionsBase Station Connections
Interface Role
DB 15
IDU/ODU interface:
Fast Ethernet from/to SDA-4S
Power from SDA-4S
DB9 Fault finding / Debug Use Only
RJ45 (with a cover) For future use
N Type RF connector – in one of the variants
For connectivity of an external antenna
BSR has two variants:
With an integrated 60 degree antenna
Or
With an N type connector for external antenna
This connector will not be fitted on an Integral Antenna Unit
24 October 200613
SDA-4S & SDA-4SDC Type IISDA-4S & SDA-4SDC Type II
• Small Data Adaptor – Four Switch
• Serves as IDU for BSR or ProST
• Provides power to:
• BSR – MicroMAX-SOC
• SS – ProST / ProST WiFi
• 4 x 100BaseT Ethernet ports
Uplink Indication
24 October 200614
Connecting BSR to SDA-4S Type IIConnecting BSR to SDA-4S Type II
Cat 5 Ethernet (Straight) cable
• 1. Orange/White
• 2. Orange
• 3. Green/White
• 4. Blue
• 5. Blue/White
• 6. Green
• 7. & 8. NOT USED
24 October 200615
Connector PinoutsConnector Pinouts
IMPORTANT NOTE:
Pins 7 and 8 are Not Connected
24 October 200616
Lightning & Surge ProtectionLightning & Surge ProtectionTo MicroMAX-SOC
To SDA-4S
• The Optional third-party Lightning / Surge Protector (Polyphaser) is required in certain situations:
– ODU to IDU cable length of 40 metres or more (Mandatory)
– Geographical areas which suffer Severe lightning storms
• Installed outdoors on the Cat 5e cable
24 October 200617
Physical Installation Physical Installation
To Install follow the instructions in the Hardware Installation Manual –
605-0000-742 (currently Rev.E)
24 October 200618
Positioning of MicroMAX-SOCPositioning of MicroMAX-SOC
MicroMAX-SOC positioning is obtained in two planes by adjustment of the mounting bracket as shown above.
24 October 200619
WiMAX MicroMAX-SOCWiMAX MicroMAX-SOCWeb Based ManagementWeb Based Management
Reference: 605-0000-743 MicroMAX-SOC Web-based Management
24 October 200620
Web Based ManagementWeb Based Management
• Provides a User interface tool for MicroMAX-SOC Management
• Allows viewing of configuration settings.
– BSID
– SNMP Config
– IP Address
• Permits Advanced Configuration of settings
– Software Upgrades
– Setting SS Parameters
• Allows Remote access using most Web browsers
• No “Customised” Software required to be loaded
24 October 200621
Accessing Web Browser ToolAccessing Web Browser Tool
• Start your Web browser
• In the Address bar field, type the default IP address (http://10.0.0.123) of the MicroMAX-SOC Web server
• The following main menu appears:
2323
Remember to set-up Internet Explorer options iaw the manual – 605-0000-743
Address bar
24 October 200622
View System InformationView System Information
• To access System Page and show the following– Serial number
– Product Type
– Digital Board revision
– Software Version
Click on System
24 October 200623
Minimum ConfigurationMinimum Configuration
• The following must be set before trying to connect to AS8200 Netspan Management to configure Network parameters
– IP Configuration
– SNMP Communities
• Public
• Private
– UL Frequency
– DL Frequency
– TX Power
– Base Station ID
• After completion the MicroMAX-SOC must be rebooted in order for these changes to become active
All of these settings are found in the Advanced menus
24 October 200624
IP ConfigurationIP Configuration
• The main menu allows setting the following parameters for the BS
– Name – IP Address– Subnet Mask– Default Gateway
• Use Submit button to set the parameters
10.0.0.18
24 October 200625
SNMP CommunitiesSNMP Communities
• SNMP Communities menu allows setting of:
– Community string for Netspan “read” parameter – Community string for Netspan “write” parameter
• By Default– Read Community string – “public”– Write Community string – “private”
24 October 200626
Software DownloadSoftware Download
Note: In order to Activate “new” downloaded sw then “Swap Versions” must be selected and then reset.
24 October 200627
Advanced Menu SelectionAdvanced Menu Selection
• MicroMAX-SOC WEB management includes the option of Advanced menus
• A variety of detailed menus
• Only a small number of these menus are required for standard operation
– Most options are available & configured through AS8200 Netspan
24 October 200628
Advanced Tool bar optionsAdvanced Tool bar options
Option Description
Home To return to main Menu
PROV SF Provisioned Service Flow. Assigned during device provisioning and is intended to provide an upper limit on the QoS level for a particular service. Base Station ONLY.
SS To set parameters for different Subscriber units. Applicable to Base Station & Subscriber Station. (ie. EasyST / ProST)
Link To display Link information for the different Subscriber units. Applicable to Base Station ONLY
Config To retrieve / set Base Station parameters
Forwarding To retrieve information on LAN tables and other interfaces
PKM To retrieve / set Programmable Key Module settings
Debug To set Debug states
24 October 200629
Using Advanced MenusUsing Advanced Menus
• Select the desired option from the top of the page such as:– Home
– SS
– Config
– Forwarding
• Select the desired sub-option on the left side of the page
• Show Xxxx… options are used to get information about parameters in MicroMAX-SOC
• Set Xxxx… options are used to set parameters in MicroMAX-SOC
• Press the Call button to get the information or to set the parameters
• After setting parameters – use the show Xxxx option to see them, for example:
– setMacDl sets downlink parameters of MicroMAX-SOC
– showMacDl shows downlink parameters of MicroMAX-SOC
24 October 200630
Example of an Advanced menu ScreenExample of an Advanced menu Screen
Home option
Selecting sub-options
Call button
Values of the sub optionparameters
SS option Config option
Forwarding option
24 October 200631
MAC Advanced MenusMAC Advanced Menus
Menu name What it isshowMacUl Shows uplink parameters such as the
uplink frequency channel (KHz) and the Burst Profiles
setMacUl Sets uplink parameters such as the
uplink frequency channel (KHz)
showMacDl Shows downlink parameters such as the
Downlink frequency channel (KHz), BS ID and BS Tx power (“bsEirp”)
setMacDl Sets downlink parameters such as the
Downlink frequency channel (KHz), BS ID and BS Tx power (“bsEirp”)
showMacFrame Shows the MAC frame configuration parameters:
Channel bandwidth (3.5MHz or 3,500 KHz in MicroMAX-SOC 3.5FDD first release)
cp and Frame Duration (10 msec in 1060 BSR 3.5FDD first release)
setMacFrame Sets the MAC frame configuration parameters:
Channel bandwidth, cp and Frame Duration
Note: set only to values supported by the relevant board and the relevant release
24 October 200632
PROV SF MenuPROV SF Menu
See Manual for further information
Default is False (0) – Meaning do not Show more Information
STRING = Format nn,nn,nn,nn,nn,nn
(Airspan 00A00A)Select SS MAC or CID
24 October 200633
Advanced PROV SF MenusAdvanced PROV SF Menus
Menu name What it is
showSs Shows information about subscriber stations such as:
SS id, SS MAC address, state, basic CID, primary CID, secondary CID and burst profiles
Allows to select SS with a given MAC address or with a given Connection ID (CID)
showProvSf Shows details of Provisioned Service Flows
Allows to select SF with given SF ID (SFID) or with given CID
deleteProvSf Deletes Service Flows
addProvSf Adds a provisioned SF including the packet classifiers, min rate and max rate
24 October 200634
Common Terms usedCommon Terms used
Term What it is
BP Burst Profile such as: BPSK1/2, 16QAM1/2
bsId Base Station Identified (BSID) – needs to match BSID + Mask set in EasyST / ProST / SS
CID Connection ID
Dl Downlink
ProvSf Provisioned Service Flow
RFI RF Interface
Sc Service Class
Scid Service Class ID
Sf Service Flow
Sfid Service Flow ID
Ss Subscriber Station (SS) – such as EasyST, ProST, ProST-WiFi
Ul Uplink
24 October 200635
Restarting MicroMAX-SOCRestarting MicroMAX-SOC
Select RESET
24 October 200636