02.07.2020 nx-schematics & nx-routing 1 · • the unique integration ... teamcenter to sap...

02.07.2020 NX-Schematics & NX-Routing 1

Agenda


• Who am I (not so important)• Intro• The big picture of development• The environment and relationships• The Products• NX-Schematics & NX-Routing• The Customers• A small customer overview

• NX-Schematic• What is it• Where is it being used• The unique integration• How did this unique "market leading solution" come about• Reasons why you should use NX-Schematic • The logic

• NX-Routing• What is it• Where is it being used• Advantaged from NX-Routing together with NX-Schematic

• NX-Schematic & NX-Routing• TC Structure• The Process

• NX-Schematic is unique• Important for sales

• Live Presentation (also Films)• Create a Schemata «general process» (also Film)• Create a Routing from Schematic (also Film)• Create an associative Routing from Schematic (also Film)• ANT & TC Structures (also Films)

Who I am

2/07/2020 NX-Schematics & NX-Routing 3

Cad-OasEs Int. GmbHwww.oases.ch

Roland Hofmann

Lettenstrasse 7 - Postfach 446CH 6343 Rotkreuz ZG

NX / UNIGRAPHICS NX from A - Z NX Schematics NX Routing Mechanical NX Routing Electrical NX Large Assemblies

TEAMCENTER

More than 30 years of NX experience

• Ex employee of McDonnell Douglas / EDSvon McDonnell Douglas & EDS

• 10 Years EDS Distributor in Perth AUS

More than 20 years NX Schematics & NX Routing experience ( this is my world )

• Specialist in NX Schematics

• Specialist in NX Routing

• Projects and Customers around the Globe

Partner of:

Siemens SwitzerlandSiemens GermanySiemens ItalySiemens TurkeySiemens SingaporeSiemens IndiaSiemens Mexico

Part of LTX / Canada

The Big Development Picture


The Environment / The Partners


NX Schematics is an LTX product andmarketing and distributed only by Siemens

NX schematics is developed and supported by LTX Software Inc. & CAD-OasEs int. GmbH

LTX in 1992 was one of the first Alliance partner of Siemens

20 Jahre

Installation / Setup / Training Division

Partner of:

Siemens SwitzerlandSiemens GermanySiemens ItalySiemens TurkeySiemens SingaporeSiemens IndiaSiemens Mexico

The Products

2020-07-02

NX-Schematics & NX-Routing 6

NX schematics is developed and supported by LTX Canada & CAD-OasEs int. GmbH

NX routing is developed and supported by Siemens

Both NX Schematics and Routing are marketed by Siemens and can be purchased only through Siemens or their marketing partners.

Both products run under Siemens maintenance.

Aeronautical Customers


Space Customer


Military Customers


Household Customers


Deutschland / Frankreich / Spanien / IndienChina / Türkei / Russland / USA / SlowenienPolen

Bei BSH wird Mentor für den PCB Design Bereich gebraucht

Medical Customers


NX-Schematics – NX-Routing – TC – Agile – SAP

Durchgehender Prozess mit allem was benötigt wird.

Bei Agilent wird Mentor für den PCB Design Bereich gebraucht

Vehicle Building Customers


Maritim Customers


Industrial Customers


NX-Schematics


NX

NX Routing

NX Schematics

CSVPLMXML

TeamcenterMicrosoft Office

Siemens Produkt

What can you do with NX-Schematics


Any electrical Schematic

Any Layout

Any hydraulic Schematic

Any mechanical Schematic

The Integration


Direct from Schematics

NX-Routing Electrical

NX-Routing Mechanical

How did this unique Solution started


The Programmers

The Practice

About 15 year ago if started the whole thing together with the programmers from LTX. Today we have solution that nobody else has (not even close to it). We keep are develop and enhance the system day by day based on the customers demand.

Why should you use Schematics ?


Every System has its place in the industry

The Question is:

1. Does everybody need a Rolls Royce ?

2. De we really need a Porsche Cayenne ?

3. Or would a simple BMW 3 Series do the job

Common sense




There was a statement from the CEO «Mr. Bubeck»by the Dornier company:

"In the entire design process, we have only 1 interface, Teamcenter to SAP "

otherwise we make everything from within one System.

Unfortunately nobody believed it, but it is the truth

One 3D model and multiple instance in TC and ERP


Each part has it's own material number on the assembly level which comes from Schematics

This material Number is then transferred to theTC instance attribute AIE_OCC_ID.

This approach can save hundreds of 3D models inTeamcenter, saving a huge amount of time and money.

ANT structures in the TC environment


We create full TC structure of parts that are in Schematics but are never placed inthe 3D routing.

Only 2D without 3D Routing(Native and TC)

3D Routing(Native and TC)

Save lists directly in TC


Press a Button drops list into Teamcenter

• BOM• Connection Lists

If NX is already in use, nothing in the PLM must be adapted to the environment. All your processes work without any adjustment



There are two methods to work within Schematics

Item 4711Item 4712

Item 4713

Multi UsersSingle User

Nothing extra is needed here. MPM is uses

Option & Variation "Simple Handling"

02.07.2020 NX-Schematics & NX-Routing 29NX-Schematics & NX-Routing

Complete definition "Everything"

The new MPM function in NX-Schematicsgives you everything you ever needed !

ANT / BOM Structure

02.07.2020 NX-Schematics & NX-Routing 30NX-Schematics & NX-Routing

No matter if you only do 2D schemes or your process goes right into the 3D routing and form board, you get a full ANT Bom structure at every level.

2D Schematics 3D Routing 2D Formboard

Why is "Schematics" your System


• Top E-CAD System with worlds best integration

• Best ROI

• No additional Database

• No additional Interface

• No Export / Import of Data

• Simple Handling

• Changes are easy in Schematics and Routing

• All within one system

• One Contac Person for all

• All direct in the PLM (Teamcenter)

• No changes of your existing process

• Get your needed functionality quick and easy

NX-Routing


Mechanical Routing

Electrical Routing

Where is NX Routing used


In all Industries

The Process


2D Schematics:

NX Schematics is the leading system.

That means, all you define here is valid in Routing

And can be used and outputed.

3D Routing:

3D Routing is easy and very fast directly

from Schematics.

Native

ItemsFull associative

Bidirectional Function

Important: The whole process is based on Data pull process.

No Export / Import of Data

The Process (what is possible in Schematics ?)


Terminals(Order)(No-Order)

Cavity Seals(Order)(No-Order)

Wire Seals

Solder Sleeve

Add ons

Plugs

Backshells

Cables

Wires

Cable/WireMarkings

Pig-TailJumper



Any kind of device

Any kind if shielding

Quadrax Pin



Cable Diameter

Cable Weight

MinimumBendRadius

Calculation of Length and Cut Length (Cable and Wires)

Calculate the Weight including:

• Terminals• Cavity Seal• Backshell

Feed back to Schematics



Unconnected Terminal and Cavity Sealsare still in the BOM (if they need to be ordered) if they need to be ordered although NX only displays connections that are also connected

All Schematics Attributes of Devices, Cables, Wires, Terminals, Cavity Seal, Backshells, Cable Markers, etc. are handed over 1: 1 to the 3D connector models, cables and wires.

We produce accurate cables and harness structures in 3D routing, 1:1 as in the Schematics (not possible with * .hrn files)



Bidirectional Connection

No ExportNo Import

You can check the 3D Routing wiring at any time against the schematics and vice-versa.

Schematics is the leading system.

Changes in the schematic can also be made in Routing, because of the direct connection.



Harness Structure

(With User InputOr full automatic

Experience solves most of the Problems

?? Not possible

Teamcenter Structure


Elektro-Routing

Mechanical-Routing

Elektro-Routing MPM

Mechanical-Routing MPM

Damit werden auch die MPM Freigegeben

All data directly fromSchematics

The Process


Admin Training

NX-Schematics 3 DaysNX-Routing 2 Days

User Training(if a workable environment exists)

NX-Schematics 2 Days

User Knowledge / Know-HowNX-Gateway / NX-Drafting

NX-Routing 3 Days

User Knowledge / Know-HowNX-Gateway / NX-ModelingNX-Assemblies / NX-Drafting

To work efficient in the NX-Routing environmentThe handling of large assemblies is very important.

NX – Schematics is unique


In the area of electrical Schemata, NX-Schematic can do exactly the same (if not more) than the other database related E-Cad systems, but without an additional database and interface.

NX-Schematic talkes the same language like NX.

DatenbankSysteme

*.plmxl Data exchange*.hrn Data exchange

! NOT Bidirectional !

No Data exchange becauseWe are working within the sameenvironment talking the samelanguage

! Bidirectional !

The Sales and the Siemens SW rail


SI2800

If the customer wants Mentor Capital for 3D cabling then he should take mentor.

But if Mentor is too powerful and or too expensive to make his 3D cabling, you have two options.

NX30148NX30149NX30153NX30154NX30158NX30160NX33000

You know this Prices better thanAnybody else

Offer NX-Schematics and let the customer stay withinThe Siemens NX universe.

Or you allow him to purchase and use a competition product like

and he leaves the Siemens Product universe. (Not Integrated at all)

You know this Prices better thanAnybody else

The ANT and TC Structures


2D environment (TC)(without Routing)

3D environment (TC)(with Routing)

2D environment (Native)(without Routing)

3D environment (Native)(with Routing)

../../Films/New_ANT_Structures/TC_Schematics_Routing_ANT_Structure.avi

../../Films/New_ANT_Structures/TC_Schematics_Routing_ANT_Structure.avi

../../Films/New_ANT_Structures/TC_Schematics_only_ANT_Structure.avi

../../Films/New_ANT_Structures/TC_Schematics_only_ANT_Structure.avi

../../Films/New_ANT_Structures/Native_Schematics_Routing_ANT_Structure.avi

../../Films/New_ANT_Structures/Native_Schematics_Routing_ANT_Structure.avi

../../Films/New_ANT_Structures/Native_Schematics_only_ANT_Structure.avi

../../Films/New_ANT_Structures/Native_Schematics_only_ANT_Structure.avi

Online Presentation


Presentation on the System

The process from beginning:

1. Explanation of the Software and environment2. Create a small schematic3. Create the 3D Routing4. Change Schematic and Update Routing5. Bidirectional Data

The process with existing parts:

1. Attach Schematic Information2. Create stock3. Change Schematic and update Routing4. Bidirectional Data

1 2

Schematics Routing

../../Films/Routing/NX-Routing.avi


../../Films/Schematics/NX-Schematics.avi

../../Films/Schematics/NX-Schematics.avi



Thank you very much


Q & A


Do you have any questions ?

02.07.2020 nx-schematics & nx-routing 1 · • the unique integration ... teamcenter to sap...

Documents