04/2013 % discount off price pages/cranes … new/2013/berts truck...04/2013 % discount off price...

04/2013 % DISCOUNT OFF

PRICE PAGES/CRANES

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip

Phone #:

Toll Free #:

Fax #:

Email Address:

Website: www.bertsonline.com

PRICING METHOD 2 - PERCENTAGE DISCOUNT OFF LIST

1.0

CRANE/MAKE

Liftmoore Electric & Hydraulic

Cranes Various Models

Warranty One Year from In-service Date

Percentage Discount to be applied to Price List 0

Date & Price List I.D. Number 6-Jun-13

2.0 OPTIONS See Attached Price Schedule

starting with 2.1, 2.2, etc.

2.1

2.2

3.0 EXTENDED WARRANTY OPTIONS

(Specify years, miles or hours extended term covers.)

Price: N/A3.1

3.2

4.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED

DELIVERY STARTING POINT - City, State, Zip Moorhead, MN

Price per loaded mile 2.00$

5.0 NEW EQUIPMENT RENTAL PROGRAM

Hourly Rental Rate: N/A

Weekly Rental Rate: N/A

Monthly Rental Rate: N/A

Percent (%) of Rental Fee applied to purchase price: N/A

If the new rental equipment is purchased and finance

charges are applicable for the actual rental term only,

state the actual interest rate here: ________________

6.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM

See Solicitation Special Terms and Conditions.

DEDUCT cost per Used Hour from the original Contract Price N/A

7.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0

AND ACCESSORIES - (See Special Terms and Conditions)

Price List Date and Number June 6,2013, Bert's Truck Eq

8.0 INSTALLATION SERVICES MAY BE REQUESTED ON AN AS NEEDED BASIS.

See Special Terms and Conditions $ 90.00 /Hour

NOTE: The Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage

may result in your bid being rejected.

Bert's Truck Equipment of Moorhead, Inc

Jim McLaughlin, Government Fleet Sales

3804 Highway 75 North

PO Box 336

[email protected]

Moorhead, MN 56561-0336

218-233-8681

800-232-3787

218-233-9548

Bert's Truck Equipment, Inc

Liftmoore Cranes

June 6th, 2013

Bert's Contract

Price

Notice of New Crane requirements when

used in the Construction Industry as per OSHA

(Standard - 29 CFR) 1926.1400 Safety and Health Regulations

Cranes in Construction 1926.1441(d)(2) Equipment

Manufactured after NOV 8, 2011 with a lifting capaity of 2,000 Lbs

or less that is used in the construction industry are required to have an anti two-block device that meets the requirements of 1926.1416(d)(3)

Item Optional ANTI Two-Block added to any 2,000 Lbs crane at time of Order

1.00 The Anti Two-Block is not offered on the L-8 Crane.

Not avalible as a retrofit. $ 336.00


Liftmoore Cranes

June 6th, 2013

L SeriesMODEL

DESCRIPTION

1.01 L-8

( 39005 ) 4500 Ft-Lb. Moment Rating.

Capacity 800 Lbs. at all Load Radii

Boom telescopes manually from 3 Ft. to 5 Ft.

25 Ft. of 3/16 In. Galvanized Aircraft Cable.

12.5 Ft. long Pendant Control.

25 Ft. Battery Wire, Ground Wire and 150 Amp. Circuit Breaker. $ 1,948.00

Shipping Weight: 425 Lbs.

1.02 L-21

( 38994 ) 6000 Ft.-Lb. Moment Rating.

Capacity 2000 Lbs. at 3 Ft.

Boom telescopes manually from 3 Ft. to 5 Ft.

Includes 25 Ft. of 3/16 In. Galvanized Aircraft Cable.

Includes Traveling Block. 12.5 Ft. Remote Pendant Control.

25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Cable and

150 Amp. Circuit Breaker. $ 2,390.00


1.03 L-21-7

( 38995 ) Same as L-21 above except boom telescopes

from 3' 3" to 7' 3" in two stages. $ 2,572.00


1.04 L-21W

( 39057 ) Same as L-21 except with larger 2.7 HP, 2000 lbs

single line pull capacity winch, includes 62 ' of 1/4"

Galvanized Aircraft Cable with Hook and Safety latch $ 3,231.00


1.05 L-21W-7

( 39042 ) Same as L-21W except boom length

telescopes from 3' 3" to 7' 3". $ 3,343.00


1.06 NOTE:

For Service Body Corner Mount, order shortened pedestal,deduct $40.00 from List Price. $ (40.00)


Liftmoore Cranes

June 6th, 2013

Manual Rotation

206EL

MODEL

DESCRIPTION

1.07 206EL

( 38880 ) 6,500 Ft. - Lbs. Moment Rating.

2000 Lbs. capacity at a 3 Ft. load radius.

Boom Length 5 1/2 Ft. to 9 Ft. manualy extended

Power Up, Gravity Down Boom Elevation

Load Sensor Included

Efficient Planetary Gear Winch with Permanent Magnet Motor.

Includes 35 Ft. of 3/16" Galvanized Aircraft Cable.

18 Ft. Remote Pendant Control

Travel block for double line use above 1000 Lbs. $ 4,260.00

Shipping Weight 485 Lbs.

1.08 NOTE: $ 625.00

Upgrade with larger 2.7 HP, 2000 lb single line pull capacity

winch and 62 Ft. of wire rope for below ground level use.Travel block replaced with down haul pickle weight.

1.09 NOTE:

For Service Body Corner Mount, order shortened pedestal,deduct $40.00 from List Price $ (40.00)

2000A

1.10 2000A

( 39041 ) 6,000 FT.- Lb. Moment Rating.

2000 Lbs. capacity at a 3 Ft. load radius

Boom Length 5 1/2 ft. to 9 Ft. manualy extended

Efficient Planetary Gear Winch with a 2.7 HP Permanent

Magnet Motor. Single Line capacity of the winch is 2000 Lbs.

40 Ft. of 1/4" Galvanized Aircraft Cable is standard

12 Ft. Pendant Contrtol

Manual Rotation and Manual Boom Elevation

25 Ft. of Battery Power Cable, 3 Ft. Ground Wire and

150 Amp Circuit Breaker.

$ 3,453.00


Accessories (Outriggers, etc.) are listed at the end of this price list.


Liftmoore Cranes

June 6th, 2013

Power Rotation

206R & 206REL

MODEL

DESCRIPTION

6,500 Ft-Lbs. Moment Rating

2000 Lbs. capacity at a 3 Ft. Radius

Efficient Planetary Gear Winch with Permanent Magnet Motor.

Boom length is 5.5 Ft. manualy extended to 9 ft.


Travel block for double line use above 1000 Lbs.

Can be easly adapted to either Flat Bed or Utility Body

Corner Mount.

1.11 206R

( 38907 ) Power Rotation, Manual Boom Elevation

Rotation is Continuous and Unlimited.

Rotation is powered by a 12V Dc Electric Motor.

Gas Spring used for assisting boom Elevation. $ 4,788.00

Shipping Weight 465 Lbs.

1.12 206REL

( 38873 ) Power Rotation and Boom Elevation.

Rotation is Continuous and Unlimited.

Rotation and Boom elevation are powered by a

12V Dc powered Hydraulic pump.

18 Ft. Remote Pendant Control

A load limiting sensor is included. $ 6,453.00


1.13 NOTE: $ 625.00

Upgrade with larger 2.7 HP, 2000 lb single line pull capacity

winch and 62 Ft. of wire rope.for below ground level use.Travel block replaced with down haul pickle weight.

1.14 NOTE:

For Service Body Corner Mount, order shortened pedestal,deduct $40.00 from List Price $ (40.00)



Liftmoore Cranes

June 6th, 2013

12V D. C. ELECTRIC CRANE

MODEL LA6K DESCRIPTION

6,600 Ft-Lbs. Moment Rating

2000 Lbs. capacity at a 3 Ft. Radius

efficient Planetary Gear Winch with Permanent Magnet Motor.

includes 50 Ft. of 3/16" Galvanized Aircraft Cable.

continuous and unlimited power rotation,

rotates on a ball bearing slewing ring,

driven by a low speed high torque hydraulic motor.

power boom extension from 5.5 to 8.5 ft with a manual

pull out to 11.5 ft.

hydraulic elevated boom to 75 degrees.

boom folds vertically for storage

load sensor is standard

travel block for easy two part line hook up

18 ft long wired pendant control

25 ft of Battery Power cable,

3 Ft. Battery Ground wire,


Master Disconnect Switch.

1.15 LA6K EX-11 $ 8,221.00

( 39018 ) Shipping Weight: 1250 Lbs.



Liftmoore Cranes

June 6th, 2013


208EL and 2700ARMODEL

DESCRIPTION

8,100 Ft.-Lb. Moment Rating.

12 V. D. C. Planetary Gear Winch.


Pendant Control is 3 Ft. longer than the extended boom.

25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Wire,

Circuit Breaker and Master Cutoff Switch included.

Load sensor is Standard

1.16 208EL-10

Max Capacity 2000Lbs at 4 Ft.

Manual Rotation

Power up Gravity down boom elevation

Boom Cylinder elevated by Electric-Hydraulic Pump.

Boom Length is 6 Ft. to 10 Ft. manualy extended $ 4,996.00


1.17 208EL-14

( 39116 ) Max Capacity 2000Lbs at 4 Ft.

Manual Rotation

Power up Gravity down boom elevation

Boom Cylinder elevated by Electric-Hydraulic Pump.

Boom Length is 6 Ft. to 14 Ft. in two stages, manually extended. $ 5,100.00


1.18 2700AR-10

( 39049 ) Max Capacity 2700 Lbs. at 3 Ft.

Unlimited Power Rotation is standard

Power Boom Up and Down Boom standard.

Cylinder equiped with load holding Counterbalance Valve.

Boom Length is 6 Ft. to 10 Ft. manualy extendedNew Feature - ANTI-TWO Block is now standard.

New Feature - Emergency stop on pendant Control is now standard.

$ 7,302.00



Liftmoore Cranes

June 6th, 2013


1.19 2700AR-14

( 39043) Max Capacity 2700 Lbs. at 3 Ft.

Unlimited Power Rotation is standard

Power up / Down Boom with Counterbalance Valve.New Feature - ANTI-TWO Block is now standard.


$ 7,406.00


3200REL & 3200REEMODEL

DESCRIPTION



12 V. D. C. Planetary Gear Winch. All Powered Functions

are 12 V. D. C. Includes 62 Ft. of 1/4 In. Galvanized

Aircraft Cable, Traveling Block. Pendant control is 18 Ft. long.Load sensor and ATB is now standard on All 3200 Series Cranes

Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063New Feature - Emergency stop on pendant Control is now standard.

1.20 3200REL-11

( 39040 ) Power Rotation and Power Boom Elevation.

Boom Length 7 Ft. to 11 Ft. $ 7,510.00


1.21 3200REL-15

( 39054 ) Power Rotation and Power Boom Elevation.

Boom Length 7 Ft. to 15 Ft. in two stages. $ 7,614.00


1.22 3200REE-11

( 39108 ) Power Rotation and Power Boom Elevation and Power Boom

Extension from 7 Ft. to 11 Ft. $ 9,080.00


1.23 3200REE-15

( 39102 ) Power Rotation and Power Boom Elevation and Power Boom

Extension from 7 Ft. to 11 Ft. with Manual Extension

from 11 Ft. to 15 Ft. $ 9,242.00




Liftmoore Cranes

June 6th, 2013


3612MODEL

DESCRIPTION


Capacity 3600 Lbs. at 3 Ft. 3 in.

All Powered Functions are 12 V. D. C.

efficient Planetary Gear Winch

Includes 62 Ft. of 1/4 In. Galvanized Aircraft Cable

Traveling Block

18 Ft. long Pendant Control.

Load Limiting Sensor.

Anti Two-Block is standard.

25 Ft. of Battery Power Cable.

3 Ft. Battery Ground Wire.




1.24 3612REE-15

( 39082 ) Power Rotation and Power Boom Elevation

Power Extension from 7 Ft. to 11 Ft. with Manual Extension

from 11 Ft. to 15 Ft. $ 9,607.00


1.25 3612X 9-15( 39???) Power Rotation and Power Boom Elevation,

Power Extension from 9 Ft.to 15 Ft. $ 9,728.00

Shipping Weight



Liftmoore Cranes

June 6th, 2013


4000X

MODEL

DESCRIPTION



12 V. D. C. Planetary Gear Winch.

All powered functions are 12 V. D. C.


Traveling Block.

25 Ft. long Pendant Control.

25 Ft. of Battery Power Cable.

3 Ft. Battery Ground Wire.



Load Limiting Sensor.

Anti Two-Block is included.


1.26 4000X-16

( 39039 ) Power Rotation and Power Boom Elevation and Power

Boom Extension from 8 Ft. to 12 Ft. with Manual



1.27 4000X-20

( 39038 ) Same as 4000X-16 except boom extends 10 to 16 Ft.

hydraulically with a 4 Ft. Manual Extension to 20 Ft. $ 11,495.00




Liftmoore Cranes

June 6th, 2013


5000WXMODEL

DESCRIPTION


Capacity 5000 Lbs. at 5 Ft. Load Radius.

12 V. D. C. Planetary Gear Drive Electric Winch.

Continuous, Unlimited Power Rotation.

Power Boom Elevation.

Pendant Control 25 Ft. long.

25 Ft. of Battery Power Cable and 3 Ft. of Battery Ground Wire.

150 Amp Circuit Breaker and Master Disconnect included.


Traveling Block with Roller Bearing Swivel Safety Hook.


Load Sensor is included.

Drum to Wire Rope Ratio meets ANSI requirements.

Crane meets OSHA 29 CFR 1910.180 and ANSI B30.5.

Tested with Strain Gages as required by SAE J1063.New Feature - Emergency stop on pendant Control is now standard.

1.28 5000WX-16

( 39061 ) Power Telescoping Boom from 10 Ft. to 16 Ft. $ 14,356.00


1.29 5000WX-20

( 38972 ) Power Telescoping Boom from 10 Ft. to 16 Ft. with

Manually Extendable Section from 16 Ft. to 20 Ft. $ 14,633.00


Accessories (Outriggers, etc.) are listed at end of this price list.


Liftmoore Cranes

June 6th, 2013


6036WX & 6036DXMODEL

DESCRIPTION


Capacity 6,000 Lbs. at 6 Ft. Load Radius.

Includes Continuous and Unlimited Power Rotation,

Power Extension 10 to 16 Ft.

Load Sensor and Anti Two-Block included.

Remote Pendant Control 25 Ft. long.

Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063

Efficient Planetary Gear driven Winch with Series MotorNew Feature - Emergency stop on pendant Control is now standard.

1.30 6036WX-16

( 39048 ) With 10 Ft. to 16 Ft. Power Telescoping Boom. $ 15,200.00


1.31 6036WX-20

( 39058 ) Powered Extension from 10 Ft. 4 In. to 16 Ft. 4 In.

Manual Pullout Section of 3 Ft. 8 In. for total

Extension of 20 Ft. $ 15,494.00


6036DX-22

1.32 6036DX-22

( 39019 ) Powered Boom Extension from 11 to 22 Ft.

$ 16,847.00

Shipping Weight : 2025 Lbs.



Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

1032X & XPMODEL

DESCRIPTION

10,000 Ft.-Lbs. Moment Rating.

3200 Lbs. Maximum Lifting Capacity at 3 Ft. Load Radius.


Removeable Remote Pendant Control 18 Ft. long.

Rotation limited to 365 Degrees.

Pump, Reservoir and Hoses not included.

Pump should supply 6 GPM at 2500 PSI.

Anti Two-Block is standard feature.

Load Sensor is standard feature.


1.33 1032X-11

( 38924 ) Power Hoist, Power Boom Elevation, Power Rotation

Power Boom Extension. Boom Length telescopes

under power from 7 Ft. to 11 Ft. $ 10,716.00


1.34 1032X-15



under power from 7 Ft. to 11 Ft. and Manually from

11 Ft. to 15 Ft. $ 10,855.00


PROPORTIONAL HYDRAULIC CONTROL

1.35 1032XP-15

( 39097 ) Same crane as 1032X-15 except with Proportional

Hydraulic Controls. $ 11,809.00




Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

1640X & XPMODEL

DESCRIPTION

16,000 Ft.-Lbs. Moment Rating.

4000 Lbs. Maximum Lifting Capacity at 4 Ft. Load Radius.


Removeable Remote Pendant Control 20 Ft. long.

Rotation limited to 365 Degrees.



Battery Wire, Fuse and Electrical Cut Off Switch included.

Anti Two-Block included.



1.36 1640X-16



under power from 8 Ft. to 12 Ft. and Manually from

12 Ft. to 16 Ft. $ 12,568.00


1.37 1640X-20

( 39089 ) Same as 1640X-16 except boom extends 10 to 16 Ft.




1.38 1640XP-16

( 39106 ) Same crane as 1640X-16 except with Proportional

Hydraulic Controls. $ 13,522.00


1.39 1640XP-20

( 39051 ) Same as 1640XP-16 except boom extends 10 to 16 Ft.





Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

2550X & XPMODEL

DESCRIPTION


Capacity 5000 Lbs. at 5 Ft. Load Radius

Hydraulically powered Rotation, Winch, Boom Elevation.

Continuous, Unlimited Rotation.

Removeable Pendant Control 25 Ft. Long.


Traveling Block with Swivel Safety Hook.







1.40 2550X-16

(39029) Power Boom Elevation, Power Rotation and Power

Boom Extension from 10 Ft. to 16 Ft. $ 13,626.00


1.41 2550X-20

( 39100 ) Power boom Elevation, Power Rotation and Power

Boom Extension from 10 Ft. to 16 Ft. 4 Ft. Manual

Boom Extension from 16 Ft. to 20 Ft. $ 13,886.00



1.42 2550XP-16

( 39091 ) Same as 2550X-16 except that Proportional

Hydraulic Control is added. $ 14,579.00


1.43 2550XP-20

( 39107 ) Same as 2550X-20 except that Proportional

Hydraulic Control is added. $ 14,840.00




Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

3660X & XPMODEL

DESCRIPTION


Capacity 6000 Lbs. at 6 Ft. Load Radius

Hydraulically powered Rotation, Winch,

Boom Elevation and Boom Extension.


Removeable Pendant Control is 25 Ft. long.


Includes Traveling Block with Swivel Safety Hook.







1.44 3660X-16

( 38683 ) Boom Length 10 Ft. to 16 Ft. $ 14,575.00


1.45 3660X-20

( 39021) Power Boom from 10 Ft. to 16 Ft. with Manual




1.46 3660XP-16

( 38826 ) Same as 3660X-16 except Proportional Control

Hydraulic System is added. $ 15,529.00


1.47 3660XP-20

( 38873 ) Same as 3660X-20 except Proportional Control

Hydraulic System is added. $ 15,841.00




Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

MODEL 4064XP DESCRIPTION


Capacity 6400 Lbs. at 6.2 Ft. Load Radius


Boom Elevation and Boom Extension from 10 to 22Ft.


High Speed Planetary Gear Winch

External Rotation Gear with Bronze Alloy Worm Gearbox

Wireless or Removeable Wired Pendant Control.








Meets requirements of 29 CFR 1910.180, ANSI B30.5 and SAE J1063New Feature - Emergency stop on pendant Control is now standard.

1.48 4064XP-22

( 38858 ) Standard Removeable Pendant Control. $ 17,036.00


1.49 4064XP-22

( 39099 ) Wireless Remote Control with CAN Wire $ 18,050.00




Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

5080X & XPMODEL

DESCRIPTION


Capacity 8000 Lbs. at 6 Ft. Load Radius.



Continuous, Unlimited Rotation unless additional

electrical controls are added to the Pendant.

Removeable Pendant Control is 25 Ft. Long.








Meets requirements of 29 CFR 1910.180, ANSI B30.5 and SAE J1063New Feature - Emergency stop on pendant Control is now standard.

1.50 5080X-20

( 39078 ) Power Boom from 10 Ft. to 16 Ft. with Manual




1.51 5080XP-20


Extension from 16 Ft. to 20 Ft. Proportional Flow

Control for Powered Functions. $ 18,334.00




Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

60100XPMODEL

DESCRIPTION


Capacity 10,000 Lbs. at 6 Ft. Load Radius.

Proportional Hydraulic Control.



Continuous, Unlimited Rotation

FM Radio Remote Control.


Includes Traveling Block with Ball Bearing Swivel Safety Hook.






Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063


NOTE: Wireless Control is standard equipment on this model.

1.52 60100XP-24

( 39105 ) Includes Power Boom extension from 12 Ft. to 24 Ft. $ 21,658.00

Shipping Weight: 2810



Liftmoore Cranes

June 6th, 2013

HYDRAULIC CRANE

72100XPMODEL

DESCRIPTION


Capacity 10,000 Lbs. at 7.2 Ft. Load Radius.

Proportional Hydraulic Control.



Continuous, Unlimited Rotation

FM Radio Remote Control.


Includes Traveling Block with Ball Bearing Swivel Safety Hook.







NOTE: Wireless Control is standard equipment on this model.

1.53 72100XP-21



Weight: 2770 Lbs.

1.54 72100XP-24

( 39090 ) Includes Power Boom extension from 11 Ft. to 24 Ft. $ 26,314.00

Weight: 2870 Lbs.



Liftmoore Cranes

June 6th, 2013

ACCESSORIES

MODEL

DESCRIPTION

NOTE: 10K, 18K, 25K, 36K, 50K & 72K refer to the crane moment rating in 1000 Ft.-Lbs.

JACKSTANDS

2.01 30328 10K Ft.-Lbs. Over-Center Type (13 Lbs.). $ 98.00

2.02 38638 10K Ft.-Lbs. Over-Center Type (Left Side) $ 98.00

2.03 38518 10K Ft.-Lbs. Over-Center Type - Advise Height $ 108.00

2.04 31131 10K Ft.-Lbs. Drop Down Square Tube, Permanent Mount with Screw Base (36 Lbs.). $ 219.00

2.05 30329 36K Ft.-Lbs. Over-Center Type (27 Lbs.) $ 131.00

2.06 38658 36K Ft.-Lbs Over-Center Type (Left Side) $ 131.00

2.07 38517 36K Ft.-Lbs. Over-Center Type - Advise Height $ 157.00

MANUAL OUTRIGGERSManual outriggers include a crank down jack and detents at both the

extended and retracted positions.

2.08 38885 10K Ft.-Lbs. Outrigger, Jack on one side only $ 553.00

2.09 38860 10K Ft.-Lbs. Outrigger, For 79" Body Width $ 814.00



2.12 38980 18K Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1,003.00

2.13 39028 18K Ft-Lbs. Outrigger, For 95" Body Width $ 1,073.00

2.14 38426 25K Ft.-Lbs. Outrigger, For 90" Wide Truck Bed $ 1,324.00

2.15 38427 25K Ft.-Lbs. Outrigger, For 95" Wide Truck Bed $ 1,401.00

2.16 38038 36K Ft.-Lbs. Outrigger $ 1,462.00

2.17 38312 50K Ft.-Lbs. Outrigger $ 1,869.00

2.18 38804 72 Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1,930.00


Liftmoore Cranes

June 6th, 2013

ACCESSORIES

MODEL DESCRIPTION

OUTRIGGERS, HYDRAULIC - Both Sides Extend

Hydraulic outriggers are offered with either manual pull out or power extension.

The outrigger package includes: Diverter Valve for selecting either outrigger or crane operation,Lever control valve for directional control of the outrigger, Hose and fittings

for cylinders and lever control valve

2.19 38461 25K Ft.-Lbs. Manual Out, Hydraulic Down $ 3,497.00

2.20 38533 25K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 4,971.00


2.22 38589 36K Ft.-Lbs.Hydraulic Out, Hydraulic Down $ 5,231.00





OUTRIGGERS, HYDRAULIC - Curb Pullout, Street Fixed

2.27 38663 25K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4,494.00

2.28 38675 36K Ft.-Lbs. Curb Manual Out, Hydraulic Down Both Sides $ 3,792.00

2.29 38616 36K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4,833.00

2.30 38847 72K Ft -Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 5,430.00

OUTRIGGERS, HYDRAULIC (For Electric Cranes)

Hydraulic outriggers for electric cranes are offered with either manual or power extension.

The outrigger package includes: Electric Hydraulic Pump with starter solenoid and control switch.

2.31 38583 25K Manual Out, Hydraulic Down $ 4,018.00

2.32 38923 25K Hydraulic Out, Hydraulic Down $ 5,535.00

2.33 38611 36K Manual Out, Hydraulic Down $ 4,364.00

2.34 38610 36K Hydraulic Out and Hydraulic Down $ 5,769.00


Liftmoore Cranes

June 6th, 2013

ACCESSORIES

MODEL DESCRIPTION

BOOM RESTSRequired for all power rotation cranes. Boom Rests are designed to hold the

boom in a nearly horizontal position. A loop is included for attaching the

hook. The wire line can be tightened to hold the boom securely during travel.

2.35 22134 Boom Rest for 206REL. $ 63.00

2.36 22140 Boom Rest for 206RELS. $ 61.00

2.37 22167 Boom Rest for 2000 $ 61.00

2.38 20861 Boom Rest for Model 208, 2700, 3200, 4000 & 1640 $ 63.00

2.39 24607 Boom Rest for Model 3612 $ 63.00

2.40 22158 Boom Rest, for use with Pedestal. For Model 208, 2700, 3200, 4000

& 1640 ( Non-Adjustable) $ 77.00

2.41 22162 Boom Rest for Model 5000, 2550, 6036 or 3660 $ 75.00

2.42 22165 Boom Rest, for use with Pedestal for Model 5000, 2550, 6036 or

3660. (Non-Adjustable) $ 94.00

2.43 23510 Boom Rest for 4064 $ 89.00

2.44 22160 Boom Rest for Model 5080. $ 80.00

2.45 22164 Boom Rest, for use with Pedestal for Model 5080 (Non-Adjustable) $ 96.00

2.46 20856 Boom Rest for Model 60100 & 72100. $ 84.00


Liftmoore Cranes

June 6th, 2013

ACCESSORIES

MODEL DESCRIPTION

PEDESTALS

Pedestals are fabricated to match the mounting requirements of the crane.

Heights up to 36 inches can be supplied at the below prices.

For taller pedestals contact Liftmoore. Advise height when ordering.

2.47 18375 10K for Flat Bed Mounting $ 405.00


2.49 32624 25K & 36K for Flat Bed Mounting $ 476.00



2.52 22807 60 & 72K for Flat Bed Mounting $ 615.00

MOUNTING PLATES

Mounting plates are for welding onto the truck body. They are fabricated

to fit under the crane matching the bolt pattern and cutouts needed

2.53 30684 0.5" x 12" x 12" drilled for L-Series. $ 54.00

2.54 30685 0.5" x 15" x 15" for 208, 2000A, 2700, 3200 & 1032. $ 61.00

2.55 16698 0.75" x 15" x 15" for 4000 & 1640 $ 68.00

2.56 31821 0.75" x 16.75" x 16.75" for 5000, 2550, 6036 & 3660 $ 87.00

2.57 22136 0.75"x 17.75" x 17.75" for 4064 $ 96.00

2.58 33905 1" x 16.75" x 16.75" for 5080. $ 103.00

$ -

2.59 21954 1.25" x 21" x 21" for 60100 & 72100. $ 246.00


Liftmoore Cranes

June 6th, 2013

ACCESSORIES

MODEL DESCRIPTION

WIRELESS CONTROL SYSTEM for HYDRAULIC CRANES

WITH PROPORTIONAL CONTROLS

2.60 Add wireless control system to proportional control cranesat time of order ( replaces standard pendant control ) $ 737.00

OPTIONAL RADIO EQUIPMENT:

Engine Controls:

2.61 Receiver and wire harness for Engine Controls. Note: Does not

include any relays needed for the system. The crane still has

continuous, unlitmited rotation. $ 642.00

For other options and special applications contact Liftmoore.

WIRELESS CONTROL SYSTEM FOR ELECTRIC & HYDRAULIC

CRANES WITH ON/OFF CONTROLS

The Mega FM Wireless system maintains the use of the standard pendant

2.62 Mega FM Wireless Radio System added to Crane at time of order,

Includes standard control pendant. $ 963.00

2.63 31545 10 Gallon Hydraulic Reservoir with Filter, Strainer, $ 590.00

and Diffuser. No Hose or Fittings. (40 Lbs.).


Liftmoore Cranes

June 6th, 2013

Hydraulics Systems and Installation of Cranes

3.01Hot Shift PTO

Hydraulic System with hot shift PTO, Reservoir, filter, Fitting,

Hydraulic Oil, etc $ 2,750.00

3.02Standard PTO

Hydraulic System with hot shift PTO, Reservoir, filter, Fitting,

Hydraulic Oil, etc $ 2,100.00

3.03 Installtion or hydraulic Sytems $ 755.00

3.04 Flat Rate Hourly Labor Flat Rate $ 90.00

Crane Installation Charges

4.01 Liftmoore Cranes L-Series Models In Pick-up Box Applications $ 935.00

4.02 Liftmoore Electric Models 2000 – 6000 Models $ 665.00

4.03 Jack stands $ 90.00

4.04 Manual out/down outriggers $ 360.00

4.05 Electric/hydraulic outriggers $ 720.00

4.06 Liftmoore Hydraulic Crane Models (does not include Hydraulics) $ 665.00

4.07 Jack stands $ 90.00

4.08 Manual out/down outriggers $ 360.00

4.09 Electric/hydraulic outriggers $ 720.00

4.10 Cost per mile for pick-up or Delivery to or from Moorhead, MN 2.00$

(Maximum charge per unit for pick-up/delivery one way $ 400.00)

Buyer’sGuide for pricing Liftmoore Cranes,

Make and Model of Chassis: __________________________________________

Base Crane

Jackstand/outrigger

Boom Rest

Additional Options:

Installation Charges

Delivery

Body and Equipment By:

Bert’s Truck Equipment Inc.

Jim McLaughlin, Commercial Fleet Sales

3804 Hwy 75 North

Moorhead, MN 56560

800-232-3787, 218-233-8681

Fax 218-233-9548

Email: [email protected]

Web Site: www.bertsonline.com

04/2013 % discount off price pages/cranes … new/2013/berts truck...04/2013 % discount off price...

Documents