new

FREQUENCY INVERTERDriveLPICompact low power frequency inverter up to 0.37 kW

Drive LPI frequency inverter

The DriveLPI is HANNING’s new low power frequency inverter for amaximum motor output power of 0.37 kW. It is a single-phase (230 V, 50/60 Hz) unit in open design comprising a power board andan interface card. The universal interface provides PLC, IPC or customer-specific control options. The serial RS485 interface and the connectionfor an operating unit are installed on the power board which enablesthe use of the DriveLPI in basic configuration even without the interface card.

All signals are electrically isolated. Through a second analog input thesoftware of the frequency inverter allows user-programmable functions,such as a dancer control for textile machinery, a PID control for leveland volume adjustment in pump applications.

All other features required for operation such as mains filter, brakechopper connection, overtemperature and high and low voltage protection are already integrated. The user can also take advantage ofstandard functions such as the setting of minimum and maximumspeeds, acceleration and deceleration ramps.

HANNING’s DriveLPI low power frequency inverter is an economicand sound device which can be used in many different applicationsbecause of its compact design and individual open frame architecture.

Equipment at a glance

• Output power P = 0.37 kW• Input voltage U = 230 V ± 10%• Input frequency F = 47 – 63 Hz• Speed range: n = 0 – 544 Hz• 4 binary inputs for enabling, CW and CCW direction of rotation,

error acknowledgement (PLC compatible)• 1 analog input for speed setpoint selection (0 – 10 V)• 1 analog input for more user-specific control processes• 1 input to connect a single-track speed encoder (5-V logic)• 1 input for a motor temperature sensor• 1 input to connect a brake chopper• 1 analog output (0 – 10 V)• 1 output for a 15 V auxiliary voltage• 1 socket for a connection cable for the operating unit (6-pole RJ45)• 1 RS485 interface• 1 relay output (configurable pilot relay)• 16 kHz chopper frequency

Options

• open frame design without housing and heat sink• open frame design without housing but with heat sink• with housing and without heat sink• with housing and heat sink

DriveLPI – flexible – compact – economic

HANNING ELEKTRO-WERKE GmbH & Co. KGHolter Straße 90, D-33813 OerlinghausenPostfach 1361, D-33806 Oerlinghausen

Tel +49 (5202) 707-0Fax +49 (5202) 707-301Email info@hew.hanning.comWeb www.hew.hanning.com

Fields of application

• Textile machinery• Winding machinery• Plastic machinery• Door systems• Vacuum pumps• Pumps• Ventilation systems• Air conditioning• Blowers• Centrifuges• Mills• Dosing equipment• Hoists• Winding devices• Conveyor systems• As well as mechanical and system engineering

Advantages Benefits

Compact design Reliable operation even with temperature variations and vibration

2nd analog input Programmable customer-specific control functions

RS-485 interface Up to 32 devices can be networked for easy parameter setting

Separate power board and Even without interface usable as interface card low-cost inverter, parameter setting

and operation via the RS-484 interface on the power board or the operating unit

RS-485 interface and connection for Usable as low-cost inverter with the operating unit on the power minimum configurationboard

Customer specific interface card Universal inverter platform suitable for many different applications

Connection Easy, safe and quick through plug-in and cage/clamp connections

Signal relays Different messages can be set

Electrical isolation between signal Safe application in mechanical and and power stage systems engineering

As option available with heat sink Optimal cooling design

Printed in GermanySubject to technical alterations · DriveLPI/E/11.05/St

new

FREQUENCY INVERTERDriveMCICompact frequency inverter, single and three phase

DriveMCI – efficient – flexible – individual

HANNING ELEKTRO-WERKE GmbH & Co. KGHolter Straße 90, D-33813 OerlinghausenPostfach 1361, D-33806 Oerlinghausen

Tel +49 (5202) 707-0Fax +49 (5202) 707-307Email info@hew.hanning.comWeb www.hew.hanning.com

Printed in Germany · Subject to technical alterations · DriveMCI/E/03.07/StThe products shown in this brochure may differ from the standard design.

DriveMCI frequency inverter

The new DriveMCI (modular customized inverter) frequency inverterseries has been designed for a power range from 0.37 kW to 4.0 kW and is based on several power stages. It is available in twodifferent sizes. Size A with 0.37 / 0.75 kW in 230 V, single phase and0.75 / 1.5 kW in 400 V, three phase. Size B with 1.5 / 2.2 kW in 230 V,single phase and 2.2 / 4.0 kW in 400 V, three phase. In addition to the230 V version the lowest power of 0.37 KW is also available as special design with 115 V. The contoller is integrated into the powerstage and offers all common state-of-the-art features of a standardfrequency inverter.

Thanks to its modular design it is easy to meet specific customerrequirements regarding interfaces. The standard interface unit provides two analog inputs as well as several binary I/Os and serialcommunication via RS485 (CAN in preparation). Heat sink and mainsfilter are integrated as standard. It is however possible to customizethem if necessary. Even the housing, suitable for IP20, can be removed if required by the set up and the inverter can be used as“open frame” unit.

HANNING’s DriveMCI is an individually adaptable and flexible fre-quency inverter. It can be used in many different fields of applicationsand industries thanks to its numerous design options, open framearchitecture and compactness.

Technical data single phase three phase

Output power P 0.75 kW 1.5 kW

Input voltage U 176 - 264 V 360 - 460 V

Input frequency F 47 - 63 Hz

Speed range n 0 - 400 Hz(higher on request)

Analog input 0 - 10 V

Equipment at a glance• Programmable binary inputs, PLC-compatible signals• Programmable binary output• Up to 8 freely programmable parameter sets• Integrated mains filter• PID controller technology function• S-ramp function• Vector control, sensorless motor management• Switching frequency 2 - 12 kHz, special application 16 kHz• Electronic motor protection, I2t emulation• Motor PTC evaluation• Connection for a double track encoder• Connection for relay• DC brake• Auto start after power OFF• Delta boost for high breakaway torques• Three-phase variants with integrated chopper• Parameter setting through HANNING menu terminal

with plain text display• Parameter setting through HANNING DrivePAR parameter

setting software

Dimensions L x W x D

Housing with heat sink 185 x 91 x 138 mm

Housing without heat sink 165 x 87 x 103 mm

Product advantages Benefits

Compact design Trouble-free operation even with temperature variations and vibrations

Customized Standardized inverter platform interface PCBs for a wide range of applications

Connections Quick and safe thanks to screw-type connectors

Galvanic insulation between signal Safe application in machine and power stage construction and system engineering

Heat sink as standard Best cooling features

The matching solution for every task

HANNING offers a wide range of electrical and electronic drive components such as three-phase and AC motors, linear actuators,radial and axial blowers, drain and circulation pumps and frequencyinverters.

The individual designs of all components as well as HANNING’s comprehensive engineering know-how ensure best solutions for driverequirements.