06/08/141 lecture 3 light propagation in optical fiber by: mr. gaurav verma asst. prof. ece, niec
TRANSCRIPT
![Page 1: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/1.jpg)
06/08/14 1
Lecture 3
Light Propagation In Optical Fiber
By:
Mr. Gaurav VermaAsst. Prof. ECE, NIEC
![Page 2: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/2.jpg)
06/08/14 2
Introduction
An optical fiber is a very thin strand of silica glass in geometry quite like a human hair. In reality it is a very narrow, very long glass cylinder with special characteristics. When light enters one end of the fiber it travels (confined within the fiber) until it leaves the fiber at the other end. Two critical factors stand out: Very little light is lost in its journey along the fiber Fiber can bend around corners and the light will stay within it and
be guided around the corners.
An optical fiber consists of two parts: the core and the cladding. The core is a narrow cylindrical strand of glass and the cladding is a tubular jacket surrounding it. The core has a (slightly) higher refractive index than the cladding. This means that the boundary (interface) between the core and the cladding acts as a perfect mirror. Light traveling along the core is confined by the mirror to stay within it - even when the fiber bends around a corner.
![Page 3: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/3.jpg)
06/08/14 3
BASIC PRINCIPLE
When a light ray travelling in one material hits a different material and reflects back into the original material without any loss of light, total internal reflection is said to occur. Since the core and cladding are constructed from different compositions of glass, theoretically, light entering the core is confined to the boundaries of the core because it reflects back whenever it hits the cladding. For total internal reflection to occur, the index of refraction of the core must be higher than that of the cladding, and the incidence angle is larger than the critical angle.
![Page 4: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/4.jpg)
06/08/14 4
What Makes The Light Stay in Fiber
Refraction The light waves spread out along its beam. Speed of light depend on the material used called refractive
index.Speed of light in the material = speed of light in the free
space/refractive index
Lower refractive index higher speed
![Page 5: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/5.jpg)
06/08/14 5
The Light is Refracted
This end travels further than the other hand
Lower Refractive index Region
Higher Refractive index Region
![Page 6: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/6.jpg)
06/08/14 6
Refraction
When a light ray encounters a boundary separating two different media, part of the ray is reflected back into the first medium and the remainder is bent (or refracted) as it enters the second material. (Light entering an optical fiber bends in towards the center of the fiber – refraction)Refraction
LED or LASE
R Source
![Page 7: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/7.jpg)
06/08/14 7
Reflection
Light inside an optical fiber bounces off the cladding - reflection
Reflection
LED or LASER Source
![Page 8: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/8.jpg)
![Page 9: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/9.jpg)
06/08/14 9
Critical Angle If light inside an optical fiber strikes the cladding too
steeply, the light refracts into the cladding - determined by the critical angle. (There will come a time when, eventually, the angle of refraction reaches 90o and the light is refracted along the boundary between the two materials. The angle of incidence which results in this effect is called the critical angle).
Critical Angle
n1Sin X=n2Sin90o
![Page 10: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/10.jpg)
06/08/14 10
Angle of Incidence
Also incident angle Measured from perpendicular Exercise: Mark two more incident angles
Incident Angles
![Page 11: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/11.jpg)
06/08/14 11
Angle of Reflection
Also reflection angle Measured from perpendicular Exercise: Mark the other reflection angle
Reflection Angle
![Page 12: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/12.jpg)
06/08/14 12
Reflection
Thus light is perfectly reflected at an interface between two materials of different refractive index if:
The light is incident on the interface from the side of higher refractive index.
The angle θ is greater than a specific value called the “critical angle”.
![Page 13: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/13.jpg)
06/08/14 13
Angle of Refraction
Also refraction angle Measured from perpendicular Exercise: Mark the other refraction angle
Refraction Angle
![Page 14: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/14.jpg)
06/08/14 14
Angle Summary
Refraction Angle
Three important angles The reflection angle always equals the incident angle
Reflection Angle
Incident Angles
![Page 15: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/15.jpg)
06/08/14 15
Index of Refraction
n = c/v c = velocity of light in a vacuum v = velocity of light in a specific
medium light bends as it passes from one medium
to another with a different index of refraction air, n is about 1 glass, n is about 1.4
Light bends in towards normal - lower n to higher n
Light bends away from normal - higher n to lower n
![Page 16: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/16.jpg)
06/08/14 16
Snell’s Law
The angles of the rays are measured with respect to the normal.
n1sin 1=n2sin 2
Where n1 and n2 are refractive index of two materials
1and 2 the angle of incident and refraction respectively
![Page 17: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/17.jpg)
06/08/14 17
Snell’s Law
The amount light is bent by refraction is given by Snell’s Law: n1sin1 = n2sin2
Light is always refracted into a fiber (although there will be a certain amount of Fresnel reflection)
Light can either bounce off the cladding (TIR) or refract into the cladding
![Page 18: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/18.jpg)
06/08/14 18
Snell’s Law
Normal
Incidence Angle(1)
Refraction Angle(2)
Lower Refractive index(n2)
Higher Refractive index(n1)Ray of light
![Page 19: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/19.jpg)
06/08/14 19
Snell’s Law (Example 1)
Calculate the angle of refraction at the air/core interface
Solution - use Snell’s law: n1sin1 = n2sin2
1sin(30°) = 1.47sin(refraction)
refraction = sin-1(sin(30°)/1.47)
refraction = 19.89°
nair = 1ncore = 1.47ncladding = 1.45incident = 30°
![Page 20: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/20.jpg)
06/08/14 20
Snell’s Law (Example 2)
Calculate the angle of refraction at the core/cladding interface Solution - use Snell’s law and the refraction angle from Example
3.1 1.47sin(90° - 19.89°) = 1.45sin(refraction)
refraction = sin-1(1.47sin(70.11°)/1.45)
refraction = 72.42°
nair = 1ncore = 1.47ncladding = 1.45incident = 30°
![Page 21: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/21.jpg)
06/08/14 21
Snell’s Law (Example 3)
Calculate the angle of refraction at the core/cladding interface for the new data below
Solution: 1sin(10°) = 1.45sin(refraction(core))
refraction(core) = sin-1(sin(10°)/1.45) = 6.88°
1.47sin(90°-6.88°) = 1.45sin(refraction(cladding))
refraction(cladding) = sin-1(1.47sin(83.12°)/1.45)= sin-1(1.0065) = can’t do
light does not refract intocladding, it reflects backinto the core (TIR)
nair = 1ncore = 1.47ncladding = 1.45incident = 10°
![Page 22: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/22.jpg)
06/08/14 22
Critical Angle Calculation
The angle of incidence that produces an angle of refraction of 90° is the critical angle n1sin(c) = n2sin(°)
n1sin(c) = n2
c = sin-1(n2 /n1)
Light at incident anglesgreater than the criticalangle will reflect backinto the core
Critical Angle, c
n1 = Refractive index of the coren2 = Refractive index of the cladding
![Page 23: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/23.jpg)
06/08/14 23
NA Derivation
![Page 24: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/24.jpg)
06/08/14 24
Acceptance Angle and NA
The angle of light entering a fiber which follows the critical angle is called the acceptance angle,
= sin-1[(n12-n2
2)1/2]
Numerical Aperature (NA)describes the light-gathering ability of a fiber
NA = sin
Critical Angle, c
n1 = Refractive index of the coren2 = Refractive index of the cladding
Acceptance Angle,
![Page 25: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/25.jpg)
06/08/14 25
Numerical Aperture
The Numerical Aperture is the sine of the largest angle contained within the cone of acceptance.
NA is related to a number of important fiber characteristics. It is a measure of the ability of the fiber to gather light at the
input end. The higher the NA the tighter (smaller radius) we can have
bends in the fiber before loss of light becomes a problem. The higher the NA the more modes we have, Rays can bounce
at greater angles and therefore there are more of them. This means that the higher the NA the greater will be the dispersion of this fiber (in the case of MM fiber).
Thus higher the NA of SM fiber the higher will be the attenuation of the fiber
Typical NA for single-mode fiber is 0.1. For multimode, NA is between 0.2 and 0.3 (usually closer to 0.2).
![Page 26: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/26.jpg)
06/08/14 26
Acceptance Cone
There is an imaginary cone of acceptance with an angle
The light that enters the fiber at angles within the acceptance cone are guided down the fiber core
Acceptance Cone
Acceptance Angle,
![Page 27: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/27.jpg)
06/08/14 27
Acceptance Cone
![Page 28: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/28.jpg)
06/08/14 28
![Page 29: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/29.jpg)
06/08/14 29
Formula Summary
Index of Refraction
Snell’s Law
Critical Angle
Acceptance Angle
Numerical Aperture
n=cv
n 1 sin θ 1=n2 sin θ 2
θc=sin−1( n2n1 )
α= sin−1 (√n12−n22)
NA= sin α= √n12−n22
![Page 30: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/30.jpg)
06/08/14 30
Practice Problems
![Page 31: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/31.jpg)
What happens to the light which approaches the fiber outside of the cone of acceptance? The angle of incidence is 30o as in Fig.1 (calculate the angle of refraction at the air/core interface, r/ critical angle, c/ incident angle at the core/cladding interface, i/) does the TIR will occur?
Practice Problems (1)
![Page 32: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/32.jpg)
06/08/14 32
Practice Problems (2)
Calculate:angle of refraction at the air/core interface, r
critical angle , c
incident angle at the core/cladding interface , i
Will this light ray propagate down the fiber?
air/core interface
core/cladding interface
Answers:r = 8.2°c = 78.4°i = 81.8°light will propagate
nair = 1ncore = 1.46ncladding = 1.43incident = 12°
![Page 33: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/33.jpg)
06/08/14 33
Refractive Indices and Propagation Times
0
1
2
3
4
5
6
Vacuum 1 3.336
Air 1.003 3.346
Water 1.333 4.446
Fused Silica 1.458 4.863
Belden Cable (RG-59/U)
N/A 5.551
Refractive Index
Propagation Time (ns/m)
![Page 34: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/34.jpg)
06/08/14 34
Propagation Time Formula
Metallic cable propagation delay cable dimensions frequency
Optical fiber propagation delay related to the fiber material
formula
t = Ln/c t = propagation delay in secondsL = fiber length in metersn = refractive index of the fiber corec = speed of light (2.998 x 108 meters/second)
![Page 35: 06/08/141 Lecture 3 Light Propagation In Optical Fiber By: Mr. Gaurav Verma Asst. Prof. ECE, NIEC](https://reader035.vdocument.in/reader035/viewer/2022062304/56649cbb5503460f94983157/html5/thumbnails/35.jpg)
06/08/14 35
Temperature and Wavelength
Considerations for detailed analysis Fiber length is slightly dependent on temperature Refractive index is dependent on wavelength