09 installation v2.1
DESCRIPTION
InstallationTRANSCRIPT
Installation
Data ONTAP™ Fundamentals
Objectives
At the end of this module, you will be able to– Identify the location of hardware and software
installation information– Identify the contents of the CD-ROM and floppies– List steps to prepare for Installation and
information needed to complete the installation– Configure a new storage appliance– Describe the different types of installation
procedures– Upgrade Data ONTAP™ via CIFS, NFS, and the software command
– Repurpose a storage appliance
Taking It Out of the Box
Product Documentation Software Boot Diskettes if needed Hardware
Software Install Process
Prepare
ChooseTask
Configure a New Storage Appliance
Upgrade Data ONTAP™ Software
Repurpose a Storage Appliance
Choose SetupMethod
ChooseMethod
Via Software Command
Via CIFS(Zip File)
Via NFS(Tar File)
Web-basedSetup
Command LineSetup
Reboot
Initialize Disks
Reenable Licenses
VerifyInstallation
Download
System Repurposed
Yes
Configuring a New Storage Appliance
Storage appliances are configured using the setup command:– Automatically runs at first installation when the
storage appliance is booted and /etc/rc is missing– Reconfigurable at any time by typing setup
• Not recommended unless a new install Default values are in brackets [ ].
Configuring a Storage Appliance
e010.10.10.30255.255.255.0
vif14
e4a,e4b,e4c,e4d
eng_router
10.10.10.1OurDomain
10.10.10.10010.10.10.200
10.10.10.100
Administratornollip
NetApp1JoeyGMT
Bldg. 1
adminhost
10.10.10.20
en_US
Configuring a Storage Appliance
The setup Command
Please enter the new hostname []:
Please enter media type for e0a {100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000)} [auto]:
NetApp1
Please enter the netmask for Network Interface e0a [255.0.0.0]:10.10.10.30
Please enter flow control for e0a {none, receive, send, full} [full]:
Please enter the IP address for Network Interface e0a []:Do you want to configure virtual network interfaces? [n]:
255.255.255.0
Do you want e0a to support jumbo frames? [n]:Would you like to continue setup through the web interface? [n]:Please enter the name or IP address of the default gateway:
The administration host is given root access to the filer's /etc files for system administration. To allow /etc root access to all NFS clients enter RETURN below.
Please enter the name or IP address of the administration host:Please enter the IP address for adminhost:Please enter timezone [GMT]:
Where is the filer located? []:
10.10.10.1
adminhost
10.10.10.20US/Pacific
Bldg. 1
The setup Command
What language will be used for multi-protocol files (Type ? for list)?:Setting language on volume vol0The new language mappings will be available after rebootWed Apr 7 16:12:15 GMT [localhost: rc:ALERT]: Language on volume vol0 changed to en_US Language set on volume vol0
You may enter up to 3 nameserversPlease enter the IP address for first nameserver []:Do you want another nameserver? [n]:Please enter the IP address for alternate nameserver []:
en_US
Do you want to run DNS resolver? [n]:Please enter DNS domain name []:
y10.10.10.200
Do you want another nameserver? [n]:Do you want to run NIS client? [n]:This system will send event messages and weekly reports to Network Appliance Technical Support. To disable this feature, enter "options autosupport.support.enable off" within 24 hours. Enabling Autosupport can significantly speed problem determination and resolution should a problem occur on your system. For further information on Autosupport, please see: http://now.netapp.com/autosupport/ Press the return key to continue.Setting the administrative (root) password for 270B ...NetApp1>
OurDomain.company.com
10.10.10.100
y
Upgrade
Upgrade via CIFS
Download the Software
Upgrade via CIFS
Upgrade via CIFS
Sun Feb 9 19:03:20 GMT [download.request: notice]:Operator requested download initiateddownload: Downloading disks: opening Data ONTAP XX
Tue Feb 4 21:23:03:55 GMT [kern.shutdown:notice]: System shutdown because:"reboot"Alpha Open Firmware by FirmWorksCopyright 1995-1998 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.3_a2Memory size is 1024 MBTesting SIOTesting LCDProbing devices
NetApp1> download
NetApp1> reboot
NetApp Release XX: Fri Feb 7 00:03:16 PST 2005NetApp1> version
download: boot blocks successfully copied to disk(s)Sun Feb 9 19:15:23 GMT [download.request Done:notice]:Operator requested download completed
…………………………………………… done
Upgrade via NFS
Upgrade via NFS
./install_netapp /NetApp
$$$$$tar xvf XX_sysfiles.tarcd /NetAppcp *.tar /NetAppcd /dldir
xx
xx
The software Command
The software Command Syntax
NetApp>software get http://swserver/XX_setup_i.exe
NetApp>software listsetup.exeXX_setup_i.exe
NetApp>software delete setup.exe
NetApp>software install XX_setup_i.exe
NetApp>software install http://swserver/XX_setup_i.exe
Upgrade via software command
software: copying to /etc/software/XX_setup_i.exesoftware: 100% file read from location.software: /etc/software/XX_setup_i.exe has been copied.software: installing software, this could take a few minutes...Fri Apr 2 09:54:59 PST [rc:info]: software: installation completed.Please type download to load the new software and reboot subsequently for changes to take affect.
download: You can cancel this operation by hitting Ctrl-C in the next 6 seconds. Depending on system load, it may take many minutesto complete this operation. Until it finishes, you will not be able to use the console.Fri Apr 2 09:55:22 PST [download.request:notice]: Operator requested download initiateddownload: Downloading boot device...................... Downloading boot device (Service Area)NetApp1> Fri Apr 2 09:56:54 PST [download.request Done:notice]: Operator requested download completed
NetApp1> software install http://webserver/XX_setup_i.exe
NetApp1> download
NetApp1> rebootNetApp1> versionNetApp Release XX: Tue Mar 16 13:53:42 PST 2005
Reinstall or Repurpose a
Storage Appliance
Reinstallation
Gather network and license informationInitialize the storage applianceComplete the setup scriptRebootRe-enable licensesObtain and install Data ONTAP™ softwareDownloadRebootVerify the installation
Steps for Reinstalling a Storage Appliance
Upgrade vs. Reinstall Process
Topic Review
What is the the difference between an “out-of-the-box” installation and a full installation?– Full installation requires you to boot from floppies
or flashcard and install licenses. Out-of-the-box requires only you run setup.
What happens when the storage appliance system disks are initialized?– All data on the disks is destroyed.
Topic Review
Name three methods to install Data ONTAP™?– CIFS, NFS, software command
How do you access the storage appliance for configuration via the HTTP protocol?– http://storage_appliancename/api
List steps to prepare for Installation and info needed to complete the install.– Configuration worksheet– Type of install you are going to perform– Complete setup script– Reboot– Verify the installation
Exercises
Installation-Initialize the System Disks
Exercise SlideExercises
Installation-Remainder of Exercises