movetech catalogue v2.1
DESCRIPTION
movetech remote products catalogueTRANSCRIPT
LAN SERIES
APPLICATIONS
A new remote TV camera control systemdesigned to fit present and futurerequirements to automate broadcast andprofessional TV environments.
Intelligent heads able to provide cameramovement with the quality and smoothnessrequired in broadcast environments.
Ergonomic consoles equipped with highprecision sensors and touch screen graphicaluser interface.
Central Control Host to administrate and operate thewhole system with a friendly and powerfulgraphical user interface.
This Broadcast quality equipment combinedwith the connectivity power of a standardlocal area network (LAN) provides uniqueadvantages four your applications.
PUBLIC HALLS
where remarkable events and performances arecelebrated periodically.
Theaters Concert & Opera Houses Sport halls Congress lecture Halls and Parliamentary applications
TV PRODUCTION FACILITIES
News studios Polyvalent studios
These are the perfect applications to installa remote camera control system. A permanentand non-intrusive installation allows abroadcast company to produce TV programswith a dramatic cost reduction.
Many programs are designed following anautomated sequence. Movetech's Camera ControlSystem lets automate sequences of images withremarkable advantages:
One operator is able to control and managemany cameras, helped with an easy graphicaluser interface, saving costs compared withclassic manual camera operation.
Native interface with Virtual RealitySystems (VRS). Nowadays, TV facilities areextended with systems able to recreatevirtual reality studios. An importantrequirement is real time, where frame toframe head position has to be reported tothe virtual reality computer. Movetech'sControl System supports this featurenatively.
Original shots from heads installed on difficultpositions can be obtained.
Combinations of heads plus accessories:Movetech heads may be mounted and extendedwith movetech accessories like: pedestals,electromechanical chariots, cranes, etc
V2.1
LAN CONNECTIVITY
MOVETECHNETWORK TOPOLOGYMovetech is specialized in broadcast criticalapplications, were connectivity is a must.
The system has ben designed based oncomponents tied by a network to accomplishthe following requirements:
Easy installationHigh availability designReliabilityPowerful administration capabilitiesComplex infrastructures with changing needs.
as if it were a PC network.A standard LAN is required to communicate every component of the system.
Every movetech component interfaces with the rest of the system via standard LAN RJ-45 connector.
This features matches today's technology needs for inter-systems connectivity at high speed extendingintegration capabilities to facilitate Studio automation.
Your preferred local area network installer will be able to setup the installation easily, as if it were aPC network.
MOVETECHCOMPONENTS
HEAD
(RHG
- 7
00)
CONS
OLE
(CST
-280
4)CE
NTRA
L CO
NTRO
L SY
STEM
(CEM
-280
2+SC
C-28
02/C
E)
SYSTEM CONFIGURATIONSDepending upon customer needs, many possible configurations are possible.
Some of them are detailed below:
1 Central Control Host + 2 or more heads
1 Central Control Host + 1 or more manual consoles + 2 o more heads
1 Desk manual console + 1 head
1 multihead manual console + 2 or more heads
ONLY A STANDARD LAN IS REQUIRED TO COMMUNICATE EVERY MOVETECH COMPONENT DESCRIBED ABOVE.
The components to be networked are:
Head
Broadcast quality mechanics and very highprecision sensors with every axis.
Microcomputer with real time control softwareand connectivity with standard LAN.
Extra axis control capability to be used with specialaccessories.
Control Console
Ergonomically designed Consoles equipped withhigh quality sensors.
Microcomputer with real time control softwareand connectivity with standard LAN.
Touchscreen with graphical user interface andmany operating modes: Manual control operation,Memory storage & play of head positions andprofiles.
Sensing devices may also be connected as acomponent to the network.
Central Control HostMain Computer based on a PC with XP Workstationoperating System
Manual console
Software application with a very powerful graphicaluser interface, and many operating modes: Manualcontrol operation, Memory storage&play of headpositions and profiles.
Touch screen monitor
Administration tools to assign dynamically everycombination (head-console) required.
Video input multiplexer
SYSTEM CONFIGURATIONSFigures detailed show typical configurations. Powerful administration capabilities allowsystem re-configuration dynamically, based on programs needs.
1 Central Control Host + 2 or more heads
1 Central Control Host + control consoles + 2 o more heads
1 Central Control Host + 1 manual consoles + 2 o more heads
RHM - 702DESIGNED TO SUPPORT AN ENSEMBLE OF A TV CAMERA +LENSES WEIGHTING NO MORE THAN 20 KG (44 LB.).ELECTRONICS HAVE THE SAME CAPABILITIES AS DESCRIBEDIN RHG - 700.
RHK - 704Especially designed to support an ensemble of Professional/Industrial camera + lenses weighting no morethan 5 Kg (11 lb.).This model is especially adequate when a non-intrusive system is required.Electronics have the same capabilities as describedin RHG - 700.
RHG
- 70
0RH
M -
702
RHK
- 70
4
REMOTE HEADSRHG - 700
Movetech's remotely controlled head is designedto support a broadcast camera and even ateleprompter.Their high-tech mechanics and electronics design toaccomplish broadcast requirements.
Reliable mechanics design.Smooth and precise operation in both modes:manually or automatically operated.Reliable mechanics allow movement repeatability,backlash-free.
Low maintenance mechanics free of adjustmentsensures continuous operation.
Easily adapts most of tripods and can be invertedand mounted on ceilings depending on customersneeds; in this latter case special supports couldbe necessary.If inverted configuration is usedthe mechanical design allows the tilt axis torotate full 180 ° arc.
Contact movetech for recommendation andtechnical assistance.
Embedded electronics Real time control up to 6-axis:
Camera: Pan, tilt and Z-axis*.Lens: Zoom, Focus and iris
High precision sensors to ensure accurate control.
An Integrated power supply allows standard120/220V AC to power the head.
A local joystik can be optionally added.
LAN connectivityTCP/IP protocol ensures easy interfacing.Directly interfaces with the rest of the system viastandard LAN RJ-45 connector.* Free Z-axis is reserved for a special application. For example: anelectromechanical traveling could be connected directly to the headto provide an extra axis remotely controlled.
mov
etec
h’s
rem
ote
head
s co
nect
ivit
y de
tailS
RHG
- 70
0, R
HM -
702
, RH
K -
704)
Technical specificationsFEATURES RHG - 700 RHM - 702 RHK - 704 UNITSDimensions
Height 500 (19,7) 400 (15,7) 200 (7,9) mm (inches)Width 260 (10,2) 220 (8,7) 180 (7,1) mm (inches)Depth 280 (11) 270 (10,6) 120 (4,7) mm (inches)
Weight 14 (30,8) 8 (17,6) 3 (6,6) Kg (lbs)Maximum payload 30 (66) 20 (44) 5 (11) Kg (lbs)Maximum operational range
Pan 360 360 360 º DegreeTilt 360 90 (180º opt) 90 (180º opt) º Degree
Angular speedMaximum Pan 80 80 80 º/sMaximum Tilt 80 80 80 º/sMinimum Pan 0,01 0,01 0,01 º/sMinimum Tilt 0,01 0,01 0,01 º/s
Operating temperatureMaximum 50 50 50 ºCMinimum 10 10 10 ºC
Power consumption 130 130 130 WPower supply (120V/60Hz on demand)
Voltage 220 220 220 VFrequency 50 50 50 Hz
RepeatabilityPan 1 5 5 arcsec / mins of arcTilt 1 5 5 arcsec / mins of arc
Servo resolution/accuracyPan 2640 1200 1200 pulses / ºTilt 2640 1200 1200 pulses / ºZoom 4096 (12) 4096 (12) 4096 (12) pulses / º (bits)Focus 4096 (12) 4096 (12) 4096 (12) pulses / º (bits)
Control comunicationsCable STP/CAT 5 STP/CAT 5 STP/Cat 5Connector output RJ45 RJ45 RJ45Topology Ethernet Ethernet EthernetProtocol TCP/IP TCP/IP TCP/IPMaximum transmition speed 100 100 100 Mbits/s
Mounting detailsTripod/Pedestal/Wall/Ceiling Yes Yes YesMetric screw type 4x M10 4x M8 4x M6 units x metricDistance 130x190 128x158 35x35 mm
(5,1x7,5) (5x6,2) (1,4x1,4) (inches)
movetech reserves the right to alter product specifications without notice.
Camera functionscontrol:- Focus- Zoom- Iris- Video
RJ-45cabling
220V ACsupply
CCH
- 28
02/P
T
CENTRAL CONTROLHOSTThe Central Control Host (CCH) is a completeenvironment to automate operation andadminister of the whole set of system featuresthrough a graphical user interface, and managedby a single user.Based on PC system with an standard WindowsWorkstation as the operating system, the listof features of the Central Control System aredetailed below:
Multihead automatic controloperation modes
CCH has a powerful user interface able to store& play preset shots.The graphical user interface displays a thumbnailcorresponding to the stored position as anintuitive reference for the operator. Up to Harddisk capacity limit multiaxis head positions canbe stored and played.The head under CCH control has two automaticoperating modes:- Automatic movement with linear profile- Record & Play of the joystick movement
Multihead manual control operation
Five reliable and precise sensors let the user tooperate the selected head manually with precisionand smoothness required for broadcastenvironment.Joystick speed response on Pan and Tilt axis iscompensated according current zoom position toease the operation and precision.
CCH-
2802
/C
System administration tools
Dynamic assignment among heads and manualconsoles
Physical limits setting of Pan and Tilt axis forevery head.
Integration with other TV systemsMovetech Lan series system design allows a thirdparty system to be interconnected withmovetech's camera control system through LAN.
Movetech Software library provides real timeInterface. Available over XP and Linux OS.
Interfacing other TV studio equipment.Central Control Console software may beextended to control other external systems tointegrate with other TV Studio equipment.Examples are: Control Camera Units, Video matrix,etc.
Third party Virtual Reality systems
Integration details:
High-resolution sensors tied with a high speedLAN allows integration with Virtual realitygenerated scenarios operating at real time.
Integration with VR software applicationsmanufacturers are already available, contactmovetech for further details.
CONSOLESTouchscreen User InterfaceA touchscreen may be optionally added to facilitate automatic movement control in both modes:automatic movement with linear profile and Record of the joystick movement and play.
Multihead control operation modes
Movetech has developed a powerful user interfaceapplication able to store & play preset shots indifferent modes. The graphical user interfacedisplays thumbnails corresponding to the storedpositions as an intuitive reference for the user.Up to hard-disk capacity limit multi-axis headthumbnails positions can be stored and playedcategorized in Programs.
Movetech heads under application control havetwo automatic operating modes:
Automatic movement with linearprofile
Users store shots and their corresponding digitizedimages as thumbnails. When the head is orderedto reach the stored shot, the head calculatesthe shortest way to get that position, movingthe head axis simultaneously. Also, user is ableto select sets of two thumbnail positions: STARTand END positions and associate a selectabletransition time between them.
Record of the joystick movement &play
Meanwhile the user is manually operating thejoysticks, the system records samples every multi-axis position. Once the array is stored, the usermay order to play the stored sequence with highrepeatability precision.
Simultaneous Automatic & Manual Control Operation
The user interface allows simultaneous automatic movements over the different heads at thesame time. The movements are triggered via the touch-screen or mouse. At the same time, theapplication allows manual operation over the selected head using the console joystick.
CEM-2802 [SCC- 2802/CE]Embedded Console
Incorporates the features listed below.
High precision sensors to allow manual operationprecision and smoothness required for broadcastenvironments.
Joystick speed response on Pan and Tilt axis iscompensated according current zoom position to easeoperation and precision.
The multi-axis design allows real time control up to5 axis: Pan, Tilt, Zoom, Focus, and a Z-axis.
The target head to be controlled is defined by theCentral Control system or stored by default in thenon-volatile memory.
A touchscreen may be optionally added to facilitateautomatic movement control in both modes: automaticmovement with linear profile and Record of the joystickmovement and play.
Directly interfaces with the rest of the systemvia standard LAN RJ-45 connector.
CST- 2804Desk Multihead ConsoleThis model is ergonomically designed for a comfortableoperation, its low-profile makes the console readyto place on a table. His ergonomic design, developedand patented by movetech, is suitable for right orleft handed operators.
In stand-alone mode the user is able to control upto 4 heads. Head selection is achieved throughselectors available on the console. Feedback isdisplayed on a LCD display.
List of features:
The multi-axis design allows real time control up to5 axis: Pan, Tilt, Zoom, Focus and an optional Z-axis.
The precise sensors let the user to operate theselected head manually with precision and smoothnessrequired for broadcast environment.
Joystick speed response on Pan and Tilt axis iscompensated according current zoom position to easethe operation and precision.
A touchscreen may be optionally added to facilitateautomatic movement control in both modes: automaticmovement with linear profile and Record of the joystickmovement and play. Number of heads under control isextended up to 8.
The heads assignment can be set dynamically from theCentral Control System or stored by default in theinternal non-volatile memory.
Directly interfaces with the rest of the system viastandard LAN RJ-45 connector.
CST-
2804
CEM
-280
2
CONSOLES
Technical specifications
movetech reserves the right to alter product specifications without notice.
DimensionsHeight 120 (4,7) 60 (2,4) mm (inches)Width 260 (10,2) 420 (16,5) mm (inches)Depth 400 (15,7) 420 (16,5) mm (inches)
Weight 0,7 (1,5) 1,8 (4) Kg (lbs)Operating temperature
Maximum 50 50 ºCMinimum 10 10 ºC
Power consumption 40 40 WPower supply (120V/60Hz on demand)
Voltage 220 220 VFrequency 50 50 Hz
Memory capacity with touchscteen user InterfaceShots Unlimited Unlimited
Control comunicationsCable STP/CAT 5 STP/CAT 5Connector output RJ45 RJ45Topology Ethernet EthernetProtocol TCP/IP TCP/IPTransmition speed 100 100 Mbits/s
Indicators (only on desktop console)4x Blue illuminated: No. Head ON - 4 units
Accuracy of controlled functionsPan 12 12 bitsTilt 12 12 bitsZoom 12 12 bitsFocus 12 11520 positions
Mounting details (only for desk mounting model)Metric screw type 8x M6 - units x metricDistance elliptic - units x metric
FEATURES CEM -2802 CST - 2804 UNITS(CCH - 2802/CE)
DisplayDisplay TypeCamera numberPan/Tilt positionsZoom/ Focus rangeJoystick configurationOther local controls via menuAutomatic positins record/play
Both figures show consoles with touchscreen user interface
YesYesYesYesYesYes
LCD orFlat-touchscreen
(optionally)Flat-touchscreen
(optionally)
YesYesYesYesYesYes
Focus wheel
220V ACSupply
RJ-45Cabling
JoystickPANTILTZOOM
Head Selector
RJ-45Cabling
JoystickPANTILTZOOM
Focus wheel220V ACSupply