1-800-814-7533automotiveinteriors.com/v/vspfiles/images/seatcovers/...date: september 1, 2018 –...
TRANSCRIPT
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
Toll Free…
1-800-814-7533 www.automotiveinteriors.com
Custom Tailored Seat Covers
Welcome to our Custom Tailored Seat cover line. These seat covers provide you an alternative for those hard to find vehicles. They are a reasonably priced seat cover to upgrade and replace your present interior. Although they are not sewn to the " Original Stock Style " , they do provide you with a Tailor Made seat cover to fit your vehicle seats. Of course you will need to choose from one of the Primary Design layouts (See Diagram Page) that are offered and review the additional options that can be added to each of the primary designs. We offer Standard Stock materials which include - Dielectric Heat Sealed Single Pleated Vinyl, 2” Machine Stitch Pleated Cloth, or an ALL smooth vinyl or cloth materials. Each material has its own assortment of colors. For certain interiors the design layout may be similar to your vehicle seats with a few exceptions.
CUSTOMER INSTALLATIONS
1956 Chevy Bel Air 2 DR Hardtop
Classic Design with Option 1
Top Cap Panel
1953 Studebaker Commander 2 DR Hardtop
Standard Design with Option 2
Top & Cushion Cap Panels
1953 Oldsmobile 88 2DR Coupe
Standard Design with Option 1 -
Top Cap Panel
1950 Ford Custom 2 DR Sedan
Classic Design with Option 2
Top & Cushion Cap Panels
1966 Studebaker Lark/Cruiser 4DR Sedan
Premium Design with Option 2
Top & Cushion Cap Panels
1953 Studebaker Commander 2 DR Hardtop
Premium Design with Option 1
Top Cap Panel
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
General Information
These are made for a permanent installation. Depending on the condition of the original seat frame padding after you have removed the old original seat covers you may have to either rebuild your existing springs or add some additional foam padding.
These seat covers may not come with all the original type of tie downs (listings), pockets for wires or the special
plastic clips that may be found on vehicles. Of course, we do add extra vinyl around the perimeter edges to allow
you to Hog Ring the seat cover to the springs underneath the actual seats. .
Installation Kits (Basic Instructions/ Hog Ring Pliers/ Hog Rings) are included to complete your project.
How to price a seat cover –
Determine the PRIMARY DESIGN LAYOUT you wish to go with - Basic prices are listed by the design and the selection of materials you are going to use for the new covers. Then review the options that you may like to add to your tailored seat cover. Last by least you will choose the colors being used for the MAIN Pleated Areas and the TRIM areas.
Main Material - Heat Pressed Pleated Vinyl or 2” Machine Pleated Cloth Materials or can be done with ALL
SMOOTH Vinyl or Cloth with no Pleats.
Trim Area – Smooth vinyl or cloth sections of the seats such as the side bands, backs of the seats and any Cap
Panels that you may add from one of our design option choices. Trim Areas can be done in a contrasting color at
no extra charge.
Are you adding any extras – such as Horizontal Pleating, Headrest & Armrest covers that are actually part of the
seat configuration? See the Accessories & Extra Charge Prices.
All materials used for constructing your new seat covers are available for purchase in yard goods. You may have
other areas of your project that will require additional materials.
Door Panel Upholstery - We also offer 2 styles for replacing your door panel upholstery so that they will match your new
seat covers and provide you with a finished restoration. See attached page for the Styles, Prices and Sizes.
SEE BASIC DIAGRAM CHART
on Reverse Side of Sample Enclosed Letter
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
Custom Tailored - Design Layouts
GOLD AREA – ( Main Material ) PLEATED VINYL or CLOTH MATERIAL - ** See Note on cloth Page BROWN AREA – ( Trim Material ) SMOOTH VINYL OR CLOTH Material
PRIMARY DESIGN CHOICES STANDARD DESIGN
ALL Pleated Seating PREMIUM DESIGN
Center Panel CLASSIC DESIGN Side & Center Panels
CLASSIC 2 DESIGN Side Panels Only
ADD ON OPTION - Option 1 - Smooth Top Cap Panel - No Extra Charge This is a smooth panel that is located at the top of the backrest for each seat.
STANDARD DESIGN Option 1: Top Cap Panel
PREMIUM DESIGN Option 1: Top Cap Panel
CLASSIC DESIGN Option 1: Top Cap Panel
CLASSIC 2 DESIGN Option 1: Top Cap Panel
ADD ON OPTION - Option 2 - Smooth Top Cap Panel and Seat Cushion Cap Panel - No Extra Charge These are smooth panels located at the top of the backrest and front section of the seat cushion for each seat.
STANDARD DESIGN Options 2: Top Cap Panel
Seat Cushion Cap Panel
PREMIUM DESIGN Option 2: Top Cap Panel Seat Cushion Cap Panel
CLASSIC DESIGN Option 2: Top Cap Panel Seat Cushion Cap Panel
CLASSIC 2 DESIGN Option 2: Top Cap Panel Seat Cushion Cap Panel
2 Choices for Pleated Main Material
VERTICAL PLEATS - STANDARD - No Charge HORIZONTAL PLEATS - Additonal Charge
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
SEAT COVER PRICES – APPLIES TO ALL MATERIALS
UNIT STANDARD PREMIUM CLASSIC CLASSIC 2
Single Pleated Vinyl
FRONT or REAR $315.00 $330.00 $345.00 $340.00
FULL SET $535.00 $565.00 $595.00 $580.00
"Cloth & Vinyl" Combination or "All Cloth"
2" Stitched Cloth For Main Areas FRONT OR REAR N/A $345.00 $360.00 $355.00
FULL SET N/A $585.00 $615.00 $600.00
"Cloth & Vinyl" Combination or "All Cloth" or "All Vinyl"
Smooth - No Pleats in Vinyl or Cloth FRONT OR REAR $295.00 $310.00 $325.00 $320.00
FULL SET $495.00 $525.00 $550.00 $540.00
ADDITIONAL OPTIONS AVAILABLE FOR ALL DESIGNS - NO EXTRA CHARGES
OPTION 1 Smooth Top Cap/Panel - This is made in the Smooth Trim material color
OPTION 2 Smooth Top and Cushion Cap/Panels - These are made in the Smooth Trim Material TWO – TONE – No Extra Charge
ACCESSORY ITEMS – ADDITIONAL CHARGES APPLY
ARMREST COVERS – Solid Design ( Only if Part of the Actual Seat ) $25.00 Each
ARMREST COVERS – 2pc Console Type ( Only if Part of the Actual Seat ) $45.00 Each
HEADREST COVERS – These are for Front or Rear Headrests that are Adjustable $50.00 Pair
PATTERN SURCHARGE ( FOR MAKING NEW PATTERNS ) - Depends on Seats Styles $75.00 to $150.00
Pictures would be welcomed. If sending an email - [email protected] Please Include Vehicle Information
Samples of our materials are available for 75 cents per sample. Samples are non-returnable. If you are interested in samples - call or order online: www.automotiveinteriors.com (Under Samples)
Are you looking for the Original Sewn style replacement upholstery? If so, we may be able to assist you if:
The original seat covers are in useable condition for new patterns.
You are willing to remove the old seat cover and send to us to reproduce.
Not all patterns are accepted for reproduction.
Contact our Customs Department and speak with Diane, Extension 3 or EMAIL: [email protected] with you vehicle information and pictures of the seats for review.
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
SEAT REBUILD KITS
Seat Rebuild Instructions Tools needed: Hog Ring Pliers, Razor Blade, 3M Trim Adhesive,
Flathead Screwdriver, Wire Cutters, Marker.
1" or 2" High Density Foam Kits Step (1) Remove your seat(s) from the vehicle.
Step (2) Remove all side trim, skirts and risers. Remove and note all screws for reassembly.
Step (3) Locate the bolts and/or hinges on the outside of the seat backrest and remove. Some seats use a clip style lock that can be removed with Flathead screwdriver. Once outer clip or bolt(s) is removed, the backrest can be separated from the cushion
Step (4) Once seats are removed place on bench, now the old covers can be removed. Depending on the year of the car, the covers will be stapled on or installed with hog rings. Remove staples with flathead screwdriver. To remove hog rings, use the wire cutter, pinch with a twisting motion.
Step (5) (Illustration 1) Strip frame of all padding and burlap so all springs are exposed. Check over springs and frames for broken welds or springs. Replace and weld if needed. (Note: tempered springs cannot be welded)
Step (6) Sandblast and paint frame at this time if wanted.
Step (7) (Illustration 2) Cut burlap 4” larger than the frame and use hog rings to attach about every 6” - 8" around the edge. Using the burlap acts as a foundation, preventing the new foam/cotton padding from pushing through.
Step (8) (Illustration 3) Cut the high density Foam Sheets 4-6” larger than the frame. Spray glue the seat/burlap area and foam and press it on so it overhangs the edges. This prevents the foam from moving during and after installation. Try to shape a nice rolled edge and corners.
Step (9) (Illustration 4) Roll out the Dacron Padding to overlap complete seat. Use trim adhesive on all the edges around seat and secure from the center out - front and rear, rolling and smoothing out.
Step (10) In order to insure that the seat cover is installed evenly on the frame, mark the center point of the seat frame once finished with marker. When installing cover match with cover center point
CONGRATULATIONS You are now ready to install your covers!
PRICE: $82.00 ( 1" Kit ) - $110.00 ( 2" Kit ) + SH
Illustration 1
Illustration 2
For kits with Cotton Padding you will need to put the 7/8” Jute Padding on after the Jute Padding & before the
Cotton Padding.
Illustration 3
This will be 1" or 2" FOAM PADDING
Illustration 4
1” Dacron Padding is now being
used in lieu of the ¼” foam.
-
Date: April 1, 2021 – AUTOMOTIVE INTERIORS 1-800-814-7533
DOOR PANEL UPHOLSTERY TRIM KITS TO MATCH WITH SEAT COVERS
These are Upholstery Panels only. Customer needs to cut to size to fit panel boards
LARGE PANEL UPHOLSTERY Finished Size
SMALL/MEDIUM PANEL UPHOLSTERY Finished Size
34" HIGH x 48" WIDE 34" HIGH x 42" WIDE
We offer 2 Styles of Door Panel Upholstery Kits - BASIC Panel or SUPREME Panel Below we have examples of both styles. Prices are based on Stock Materials
All Vinyl Panels All Cloth Panels Cloth & Vinyl Panels
BASIC PANEL: Vertical or Horizontal Pleats Gray Top Area: Any Color Smooth Material
Red Bottom Area: Any Color Pleated Material ( These can be reversed with Smooth on Bottom - Pleat on Top )
SUPREME PANEL: Vertical or Horizontal Pleats Center Gray Top Area: Any Color Smooth Material
Red Middle Area: Any Color Pleated Material Gray Bottom Area: Any Color Smooth Material
Basic Panel Vertical Pleats
Basic Panel Horizontal Pleats
Supreme Panel Vertical Pleats
Supreme Panel Horizontal Pleats
Smooth Vinyl or Cloth Must Provide Heights
for each Section
Smooth Vinyl or Cloth Must Provide Heights
for each Section
Smooth Vinyl or Cloth Must Provide Heights
for each Section
Smooth Vinyl or Cloth Must Provide Heights
for each Section
Smooth Vinyl or Cloth Must Provide Heights
for each Section
Smooth Vinyl or Cloth
Must Provide Heights for each Section
On the Smooth Areas ensure that you allow enough for wrap around when doing your calculations. Example: 6" for the amount
that will be on the face of the door panel then you will need to add 2" to allow for wrap around. ( Size becomes 8" )
Red Area: Pleated Material Gray Area: Smooth Material
BASIC PANELS - Priced as Each SUPREME PANELS - Priced as Each LARGE SMALL/MEDIUM LARGE SMALL/MEDIUM
ALL VINYL = $85.00 ALL VINYL = $65.00 ALL VINYL = $95.00 ALL VINYL = $75.00
CLOTH & VINYL = $105.00 CLOTH & VINYL = $85.00 CLOTH & VINYL = $115.00 CLOTH & VINYL = $95.00
ALL CLOTH = $125.00 ALL CLOTH = $95.00 ALL CLOTH = $135.00 ALL CLOTH = $105.00 Shipping is based on State & Zip Code Destination
WATERPROOF CARDBOARD DOOR PANEL BOARDS These have to be Cut to Size for your vehicle using the old board as a Template
Size: 32" High x 48" Wide -- (Oversized for UPS Ground Shipment) $15.00 / each + Shipping Charges
If you are looking for an Original Door Panel Upholstery layout design, please email a picture of your original door panel design for review to [email protected]