AUTOMATIC PENALTY CHARGING FOR TRAFFIC REGULATION

1) Driving licence expired2) PUC expired3) Standing on zebra crossing4) Illegal signal crossing5) Alcohol

Abstract: In this project, we are designing a system which will automatically incur penalty to the car driver and owner for violation of traffic rules.

There are 3 units in this project. One will be a stand alone system which will be attached to the ignition mechanism of the car. Second will be a stand alone system which will be attached to the traffic signal points. Third will be a stand alone system which will be attached to the RTO office centre.

If the car has stand on zebra crossing, PUC expired, illegal signal crossing penalty will be charge with assign limit of 10 times. If the limit is crossed car ignition will be blocked by control unit. In this condition car owner has to pay the penalty through R.T.O office, to make smartcard reusable.

Car Unit:

For car ignition the driver has to place his SMART CARD near to the reader. If license is suspended, the car will not start.

If the car has crossed its penalty limit, then the car won’t start. To perform these operations, we are using AVR processor in the car. RF module for continuous transmission of car details like PUC, car number, driver’s license number is attached to the AVR processor.

The RF ID transmitter is placed below bumper for detection of zebra crossing. There will be relays, buzzer and LCD interfaced with the AVR processor.

Relays are used to give indication for car’s ignition system. Buzzer will be ON when penalty is charged to the car. LCD will display the penalty charged to the car.

There will be RTC time circuit also which will give all the details of the date and time of PUC by which we will get the details of PUC expiry.

AVR

RF Trans-receiver

Smart Card Reader

RTC

Relay for ignition

Buzzer for indication

LCD

AVR

RF

ID

R

eade

r

RF Transreceiver

R

B

G

CAR UNIT BLOCK DIAGRAM

Car unit:

Signal Pole Unit:

The RF ID reader will be situated at zebra crossing and Trans receiver will be situated at the signal pole. RF ID reader detect car if it stand on the zebra crossing. The RF module takes all detail information of the car and charges penalty according to the rules.

RTO UNIT:

The main control unit is placed at RTO. Which will assign the owner his penalty on detecting the smart card and recover the blocked smart card using the special codeword. As well as it read and can renew the PUC information.

PUC

AVR

PC

SMART CARD