1 graduate student orientation efstratios nikolaidis professor and graduate director department of...

31
1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering University of Toledo 8/15/2012 This presentation is based on Dr. Olson’s presentation in Fall 2007

Upload: adam-watkins

Post on 12-Jan-2016

215 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

1

Graduate Student Orientation

Efstratios Nikolaidis Professor and Graduate Director

Department of Mechanical, Industrial and Manufacturing Engineering

University of Toledo

8/15/2012

This presentation is based on Dr. Olson’s presentation in Fall 2007

Page 2: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

2

Outline

1. About MIME

2. Focus Areas

3. Department Organization

4. Graduate Programs

5. Registration and Plan of Study

6. Resources/Facilities

Page 3: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

3

1. About MIME

• MIME department recognized as one of the best on campus

• High quality of students, faculty, staff and facilities• 24 faculty members

– Society fellows: ASME (5), American Ceramic Society (1)– Journal editors, associate editors – Six book authors

• $6.4 M annual sponsored research from NSF, NREL, ARO, NIH, Chrysler, Ford, GM…

• Excellent job placement success– Close ties to industry– Faculty and student’s reputation

Page 4: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

4

2. Focus Areas

• Graduate program in MIME is specialized in terms of both teaching and research

1. Manufacturing and Industrial Engineering

2. Solid Mechanics and Design

3. Thermal Sciences and Fluids

• Different required courses in each area

Page 5: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

5

Focus Areas

• What it means to you:– Must select and concentrate on one focus

area – It will determine your course work, research

and expertise– But will not appear on your diploma

Page 6: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

6

3. Department Organization

Graduate Director

Dr. Efstratios Nikolaidis

Thermal Sciences Focus Area

Dr. Terry Ng, Leader

Solid Mechanics Focus Area

Dr. Phil White, Leader

Manufacturing Focus Area

Dr. Ahalapitiya.Jayatissa, Leader

FACULTY

Debbra Kraftchick

Academic Program Coordinator

Emily Lewandowski

Department Secretary

John Jaegly

Lab Supervisor ( 2 Tech Staff)

Administrative Specialist

STAFF

Dr. Abdollah A. AfjehProfessor & Chairman

Kathryn Rose

Page 7: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

7

Administration

• Department Chair

Dr. Abdollah Afjeh (x8210)– As administrator

• Overall responsibility for department– All administrative and academic matters

• Student matters – Special issues

– As professor• Faculty responsibilities

Page 8: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

8

Student Services Staff

• Undergraduate Academic Program Coordinator Debbra Kraftchick (x8204)

• Academic records and student files• Department/university forms• Registration/scheduling, reference letters• Preparation of GAPA’s (funding paperwork)• First person to see for administrative questions

Page 9: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

9

Student Services Staff

Department Secretary Kathryn Rose (x8210)

– Responsible for secretarial support

• Instructional support to faculty

• Appointments with Chairman on special issues

Page 10: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

10

Student Services Staff

• Administrative SpecialistEmily Lewandowski (x8037)

– Responsible for financial matters and forms including Time Cards (if needed)

– If funded, you must see Ms. Lewandowski for completion of tax and other forms. You must complete all forms for funding including those for establishing a tax ID #.

– You will not be paid until all forms have been filled and submitted.

– All department purchases and travel forms

Page 11: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

11

Student Services Staff

• Graduate Program Director Dr. Efstratios Nikolaidis ([email protected], x8216)

– Initial advisor to all new students (except RAs).– Determines all TA duties, evaluates TAs.– Approves plans of study/certifies graduation.– Approves practical training requests.– Authorizes program changes.

Page 12: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

12

Faculty

• Academic Advisors

– Supervise graduate research (thesis, project).

– Approve plan of study.

– Approve changes to plan of study.

– Award RAs.

Page 13: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

13

Graduate Student Duties• Select and register for classes based on approved

plan of study.• Select an advisor by end of fall term at the latest.

Submit advisor selection form to Dr. Nikolaidis.• Fill out a plan of study before 16 hours of coursework

have been completed. • If a TA, must take the ITA test.• Attend Graduate Seminar.• Keep your Thesis Advisor informed on your progress.• Satisfactory progress in research is a requisite for

continued financial support (assistantship).

Page 14: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

14

4. Graduate Programs

• MS (MSIE & MSME)– Thesis and project options

• 30 semester credit hours• If you ever receive RA or TA funding from the

MIME department you must do a thesis. In this case, you cannot switch from the thesis to project or coursework options.

– Coursework only option• 36 semester credit hours

Page 15: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

15

Graduate Programs

• PhD– Minimum requirements:

60 credit hours beyond MS

Page 16: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

16

MS Degree: Thesis Option

• Mathematics: 3 credits – From list of approved courses

• Focus area core courses: 9 credits– Only approved courses

• Elective courses: 9 credits– Focus area electives – From list of approved courses with approval of

advisor • All the above must be advanced level

courses: 6000 level, 5000 level less common• Thesis research: 9 credits

Page 17: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

17

PhD Degree• Research-Based Degree

– Must pass Focus Area Qualifying Examination• Expected within 1st year in program• If failed once, may petition for a retest one year later, if

petition is granted.

– No specific topic requirements, but courses must be approved by advisor.

– 15 credits minimum advanced coursework.• Planned for Ph.D. research (consult your advisor)• Prepare for Ph.D. qualifying exam in Spring semester.

• Dissertation Research: 30 credits minimum– 45 credits if taken 15 credit hours of coursework.

Page 18: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

18

• Qualifying Exam – Take in Spring semester– Advanced (senior) undergraduate level and/or first

year graduate level• Dissertation Proposal

– A definite project identified and substantial preliminary research work done. This includes literature survey, plan of tasks, feasibility study.

• Dissertation defense– Write dissertation and defend it in open forum– Significant, consequential, original

PhD Degree

Page 19: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

19

• Typically at 6000/8000 levels – MS students -- 6000 level– PhD students -- 8000 level

• Equivalent courses– Might be numbered at a lower level but considered

equivalent to MIME 6000/8000 level course.– Consult your advisor.

• MS Program advanced course requirement – 12 credits (core, approved math or elective) at

6000 level

Advanced Graduate Courses

Page 20: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

20

Plan of Study• A ‘Roadmap’ of Graduate Program

– List of all course taken or to be taken.– Must be approved by advisor, Graduate Program Director and

College of Graduate Studies

• When to File– As soon as possible but not later than beginning of Spring

term

• Where to File– Department Academic Program Coordinator’s office

• Benefits– Registration without additional advisor’s approval– Prevent having to take additional courses to meet degree

program requirements

Page 21: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

21

4. Registration• Minimum Requirements for Supported Students

1. All MS and Ph.D. students who receive full-time support must register for a minimum of 12 credit hrs and a maximum of 15 credit hrs during each semester.

2. Supported students on their last semester can register for only 1 hr. A statement from the faculty advisor certifying that the student has satisfied the degree requirements is required for each of these cases (e-mail to Dr. Hefzy will suffice for documentation).

– Supported students are allowed to register for 1 hr as their last semester only once. If a student has enrolled previously for 1 hr as his/her last semester and did not graduate, then he/she would need to enroll as specified in paragraph 1.

Page 22: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

22

Registration• Graduate Seminar MIME 6930

– Attendance required of all funded students– Notification of time by email (Nitschke Auditorium)

• Register for thesis/independent research 6960/8900 (three credits). Use your advisor’s section number.

If you do not have an advisor, register in MIME 6900-078. Prepare a Thesis Proposal Paper by December 1st and submit to your advisor.

Page 23: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

23

• Course Request Form

– Needed only for the first term. Thereafter, use web or phone registration.– Course Request Form needs the advisor’s signature.– Course Request Forms are needed for thesis or dissertation registration.

Registration Forms

Page 24: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

24

• Where to Register?– Registrar’s Office -- Rocket Hall

• What Documents Needed?– Completed and signed “Course Request Form and

Seminar Request Form”, if any• Register by Friday, August 17 to avoid late

fees. These range from $50 to $1,000 depending on how late you register.

• Instructional Fee Credit?– Tuition credit given automatically to funded students.

Takes time for tuition fee to be paid.– Normally, student must pay all other fees.

Registration Process

Page 25: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

25

Thermal Science Program Examples

• Core Computational Fluid Dynamics I (MIME 6440/8440) Intermediate Fluid Mechanics (MIME 6980/8980)

– Viscous Flow (MIME 6410/8410)– Conduction (MIME 6420/8420)– Experimental Fluid Mechanics (MIME 6450)– Advanced Heat Transfer (MIME 6980/8980)– Advanced Gas Dynamics (MIME 6980/8980)

• Electives Heating, Ventilating and Air Conditioning (MIME 5520) Jet Propulsion (MIME 5540)

• Math Advanced Eng. Math I (MIME 6000/8000)

Page 26: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

26

Solid MechanicsProgram Example

• Core- Adv. Dynamics (MIME 6200/8200)- Adv. Mechanical Vibrations (MIME 6210/8210)– Advanced Mechanics of Materials (MIME/CIVE 5300)

• Electives CAD-Finite Element Methods (MIME 5280) Fracture Mechanics (MIME 6380/8380) Elasticity (MIME 6350/8350) Engineering Analysis of Smart Materials (MIME 6980/8980)

• Math Advanced Eng. Math I (MIME 6000/8000)

Page 27: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

27

Manufacturing Program Example

• Core Design of Experiments (MIME 6720/8720) Material Removal Processes (MIME 6980/8980)- Advanced Mechanics of Brittle materials (MIME 5980)

• Electives Biomaterials in Medicine (ORTH 675/875) Manufacturing Engineering (MIME 5060) Nanomanufacturing (MIME 6980/8980) Engineering Analysis of Smart Materials (MIME 6980/8980)

– Statistical Quality Control & Mgmt (MIME 5020)– Micro Electro Mechanical Systems (MIME 5980)– Advanced Sensors and Sensor Materials (MIME 6980/8980)

• Math Advanced Eng. Math I (MIME 6000/8000)

Page 28: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

28

Resources/Facilities

• University Main Library/ Engineering Library– Archival journals– Electronic journals– Engineering/Scientific/Medical databases (a

fee might be assessed)– OhioLink -- online search and ordering of

books/references from other Ohio universities’ libraries

Page 29: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

29

Graduate Students Handbook • Details of Graduate Programs

– Admission requirements– Academic and non-academic policies– Degree requirements– Link:

www.eng.utoledo.edu/mime/graduate/docs/graduate_student_handbook_2005.pdf

Page 30: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

30

Student Support

• Student Organizations– ASME, IIE, SAE, SWE, GSA, etc.

• Student Services– Writing Center www.utoledo.edu/centers/writingcenter/ – Health Services www.utoledo.edu/healthservices/hsc/

– Counseling Center http://www.utoledo.edu/studentaffairs/counseling/

– International student services http://www.utoledo.edu/utlc/international/ Can provide small loans

Page 31: 1 Graduate Student Orientation Efstratios Nikolaidis Professor and Graduate Director Department of Mechanical, Industrial and Manufacturing Engineering

31

• MIME Web Page– www.mime.eng.utoledo.edu/

• Graduate student handbook– www.eng.utoledo.edu/mime/graduate/docs/

graduate_student_handbook_2005.pdf

• MIME Registration Tips – www.eng.utoledo.edu/mime/undergraduate/handbook/

registration.php

• Online registration– www.utoledo.edu/offices/registrar/main_campus/

registration.html

Other Sources of Information