1 lecture 1 dr kelvin tan electrical systems 100
TRANSCRIPT
![Page 1: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/1.jpg)
1
Lecture 1
Dr Kelvin Tan
Electrical Systems 100
![Page 2: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/2.jpg)
2
Contents• Resistance
• Ohm’s Law
• Series Circuits
• Parallel Circuits
• Voltage Divider Rule
• Current Divider Rule
• Kirchoff’s Voltage Law (KVL)
• Kirchoff’s Current Law
![Page 3: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/3.jpg)
3
ResistanceThe flow of charge (q) in a material per unit time is current (i)
I = dq/dt
The resistance of a material is the property to resist the flow of electrons when an external electric field is applied. The resistance converts the applied energy into heat much like the mechanical friction due to colliding electrons and collisions between electrons and other atoms. The unit of Resistance is known as Ohms ()
![Page 4: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/4.jpg)
4
Resistance The Resistance of a material depends on its length (l), area (A) and the resistivity ()
R = l/A ()
The Resistivity of some materials at 20 degree celsius. The unit is CM. /ft and in SI system is Ohm-meters
Resistivity (ρ) of various materials
Silver 9.9
Copper 10.37
Gold 14.7
Aluminium 17.0
Tungsten 33.0
Nickel 47.0
Iron 74.0
Nichrome 295.0
Chlorite 720.0
Carbon 21,000.0
![Page 5: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/5.jpg)
5
Resistance Resistors can be various types:
• Fixed Resistor
•Variable Resistors (Rheostat)
• Varistors
• Thermistors
• Photocells
•Photocells
![Page 6: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/6.jpg)
6
Resistance Fixed and Variable Resistors
The physical size (or shape) of a resistor is no clue to its resistance value, but can be a rough guide to its power rating.
![Page 7: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/7.jpg)
7
Variable Resistors (Rheostat) - resistance change by turning a knob
ResistanceThermistors - Resistance that varies rapidly and predictably with temperature
A Varistor - Voltage Dependent Resistor or VDR Photocells - resistance change in light level
![Page 8: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/8.jpg)
8
Color Coding of Resistors
ExampleFind the resistance of a semiconductor resistance if the bands are:
1st band is Gray, 2nd band is Red, 3rd band is Black, 4th band is Gold, and fifth band is Brown?
Solution:82*(10e0) () ± 5% (1% reliability)
77.9 to 86.1 and 1out of every 100 will fail to satisfy manufacturer’s range after 1000 hr of operation.
![Page 9: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/9.jpg)
9
Conductances Conductances are reciprocal of Resistances
G = 1/R (siemens, S) or Mho
G = A / l (S or Mho)
![Page 10: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/10.jpg)
10
A simple resistive circuit
Electron flow direction Conventional current direction
I I
![Page 11: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/11.jpg)
11
Ohm’s LawOhm’s Law states that
the current through an electric path is dependant on the resistance of the path and is given by:
R
V I
+
_VI
![Page 12: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/12.jpg)
12
V-I Characteristic of a Linear Resistor
I
V R
IRV
R
V I
![Page 13: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/13.jpg)
13
Power
SI unit is the Watt (I in Amperes, V in Volts and R in Ohms). 1 Watt is 1 Joules/Sec
1 hp = 746 Watts (the power of an average dray horse over a full working day)
Electrical Power
R
VRIP
VIP2
2
![Page 14: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/14.jpg)
14
Polarity references and the expression for
power
• If the power is Negative (P <0), power supplied by circuit
If the power is Positive (P > 0), power absorbed by the circuit
+_V
I
Absorbor supply ?
![Page 15: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/15.jpg)
15
Energy: Electric Energy is the Electric Power consumed over a period of time
SI unit is the Watt (I in Amperes, V in Volts and R in Ohms).
1 Watt is 1 Joules/Sec
1 hp = 746 Watts (the power of an average dray horse over a full working day)
Electrical Energy
t
PdttR
VtRItPW
0
22 ***
How to calculate the Electric Power consumed in 1 day ?
![Page 16: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/16.jpg)
16
The unit of Energy is Watt-hours (Wh), kWh, MWh or GWh
Energy (Wh) = Power (W) * Time (h)
1 kWh is 1000 Wh
1 MWh = 1000 kWh
1 GWh = 1000 MWh
We pay for electricity on the basis of kWh consumed in a specified period @ 12 cents (approx) per kWh
Electrical Energy
How many kWh is this family using ??
![Page 17: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/17.jpg)
17
Direct Current Circuits
• Analysis of simple circuits with batteries, resistors, and capacitors connected in various combinations (series/parallel).
• Kirchoff’s rules (based on law of conservation of energy and charge).
• Steady-state (current constant in magnitude and direction).
![Page 18: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/18.jpg)
18
A simple resistive circuit
![Page 19: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/19.jpg)
19
Circuit diagram
Vr = I × r
VR = I × R
I
![Page 20: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/20.jpg)
20
The battery has an internal resistance r and is connected in series with a resistor R.
IrVVV ab
Battery in Series with a Resistor
IrIR rR
EI
Battery
![Page 21: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/21.jpg)
21
Multiplying by the current yields:
The total power of the battery is converted to heat in the two resistors.
Battery in Series with a Resistor
rIRII 22
![Page 22: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/22.jpg)
22
Series connection of two resistors
Req = R1 + R2
![Page 23: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/23.jpg)
23
Two or more resistors are in series if connected together so that they have only one common point per pair.
The current is the same through each resistor because any charge flowing through one resistor must also flow through the other.
Two Resistors in Series
)( 2121 RRIIRIRV
![Page 24: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/24.jpg)
24
More than Two Resistors in Series
..........321 RRRReq
The equivalent resistance of a series connection of resistors is always greater than any individual resistance.
![Page 25: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/25.jpg)
25
Parallel connection of two resistors
21eq R
1
R
1
R
1
![Page 26: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/26.jpg)
26
Two Resistors in ParallelTwo or more resistors are in parallel if there is an equal potential difference across each resistor.
The current is not the same through each resistor because any charge flowing through one resistor cannot flow through the other. But the Potential difference (voltage) across each parallel branch is identical.
21 III 21
111
RRReq
![Page 27: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/27.jpg)
27
More than Two Resistors in Parallel
The equivalent resistance of a parallel connection of resistors is always less than the smallest individual resistance.
.......1111
321
RRRReq
![Page 28: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/28.jpg)
28
Kirchoff’s Laws
• The sum of the currents entering any junction must equal the sum of the currents leaving that junction. (KCL)
(Conservation of charge)
• The algebraic sum of the changes in potential across all of the elements around any closed circuit loop must be zero. (KVL)
(Conservation of energy)
![Page 29: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/29.jpg)
29
Kirchoff’s Voltage Law
The algebraic sum of the changes in potential across all of the elements around any closed circuit loop must be zero. (KVL)
0 riseordropsV
![Page 30: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/30.jpg)
30
Kirchoff’s Voltage Law
I
V1
V2K V L
0 riseordropsVKVL
0 21 VVE
![Page 31: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/31.jpg)
31
Kirchoff’s Current Law
Kirchoff’s Current Law states that the amount of current entering a junction must be equal to the current leaving that junction.
0
,
I leaving
I
or
I entering
![Page 32: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/32.jpg)
32
Kirchoff’s Current Law
321
leaving
0
,
I
III
I
or
I entering
I1
I2
I3
Example : I1 = 5A, I2 = 2A and I3 = 7A
Taking current entering the node as reference I1 +I2 - I3 = 0A
Taking current leaving the node as reference
I3 -I1 -I2 = 0A
![Page 33: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/33.jpg)
33
Kirchoff’s Current Law
Example :
I1=2A
I2=3A
I3=5A
I4=1A
I5= 6A
a b
Node (a) KCL
I1 + I2 + I3 = 0
Node (b) KCL
I3 + I4 + I5 = 0
![Page 34: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/34.jpg)
34
Voltage Divider Rule
In a Series Circuit, the Voltage across resistances divide according to the magnitude of the resistances
Consider a Series circuit with two elements R1 and R2 and the total voltage applied across them is V. Let the current flowing through each of the two elements (series) be “I”
![Page 35: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/35.jpg)
35
Voltage Divider Rule
E R
R
RR
E IR
E R
R
RR
E IR
R
E
21
22
221
22
21
1
121
1
21
2
1
11
RV
RVV
RV
RVV
RI
V
21VVV
+
_
![Page 36: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/36.jpg)
36
Current Divider Rule
The current in parallel circuit elements divide in ratios according to the inverse of their resistor values. Consider two parallel elements R1 and R2 and a total current I, then the current in two elements are:
![Page 37: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/37.jpg)
37
Current Divider Rule
21
2
1
21
1
21
2
R
RI I
III
R
RR
RII
I
I
I1
I1
I2
I2
![Page 38: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/38.jpg)
38
Single Subscript Voltage NotationVa means that the voltage of point “a” is Va
with respect to the ground.
Va Vb
![Page 39: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/39.jpg)
39
Double Subscript Voltage Notation
Vab means that the voltage of point “a” with respect to point “b” is Vab
Vab = Va – Vb
Vba = Vb – Va = -Vab
![Page 40: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/40.jpg)
40
If point “b” is at ground potential then Vab is simply Va
Vab = Va – 0 = Va
![Page 41: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/41.jpg)
41
What is Vab?
![Page 42: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/42.jpg)
42
Measurement of Voltage
Voltages are measured by an instrument called Voltmeter. They can be either analog (AVO) or digital (DMM).
Voltmeters are always connected in parallel with circuit where the voltage is to be measured. Voltmeters should have very high resistance, so that they do not allow current flowing through the circuit to enter in them due to their insertion.
![Page 43: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/43.jpg)
43
Measurement of Voltage
I + VR -
![Page 44: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/44.jpg)
44
Measurement of Current
Currents are measured by an instrument called Ammeter. An Ammeter can be analog or digital. An Ammeter is always connected in series with the circuit where current need to be measured.
An Ammeter should have almost zero resistance, so that they do not alter the magnitude the of the current due to their insertion.
![Page 45: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/45.jpg)
45
Measurement of Current
I
![Page 46: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/46.jpg)
46
An Open Circuit An Open circuit is one which have voltage across it but current through it is zero. An open circuit is represented by infinite resistance.
![Page 47: 1 Lecture 1 Dr Kelvin Tan Electrical Systems 100](https://reader030.vdocument.in/reader030/viewer/2022032802/56649e0d5503460f94af6474/html5/thumbnails/47.jpg)
47
A Short Circuit
A short circuit is one which allow current through it but voltage across it is zero. A short circuit is represented by zero resistance.