1. supply of furniture for digital liberary at mgims, khs ... · at mgims, khs, sewagram 122000-/...
TRANSCRIPT
Secretary, Kasturba Health Society, Sewagram invites sealed item rate tender for the following work from the providing and fixing modular furniture for
digital library at MGIMS, KHS, Sevagram satisfying the under mentioned eligibility conditions.
Sr No
Name of work Estimated cost Earnest money Duration of contract
1. SUPPLY OF FURNITURE FOR DIGITAL LIBERARY AT MGIMS, KHS, SEWAGRAM
122000-/ 5000-/ 3 Months
Tender Sale begins on 12.12.2017 Tender Sale closes on 04.01.2018 Available as in working hours (10.00 am – 05 .00 pm) Last date and time of submitting Tender: On 04.01.2018 at 3.30 pm
1. Name of the Account - The Kasturba Health Society
2. Name of the Bank - Axis Bank Ltd., Wardha
3. Bank Address - Indira Market Road, Wardha – 442001
4. Account Number - 917010025302943
5. IFSC Code - UTIB0000808
6. Branch Code - 808
7. Swift Code - AXISINBB048
8. MICR Code – 442211002
PERFORMA – A
PREVIOUS EXPERIENCE
LIST OF SIMILAR WORKS I.E., MANUFACTURING OF CLASS ROOM’S FURNITURE CONSISTING OF THREE SEATER AND TWO SEATER WITH DESK AND BENCHES FOR UNDERGRADUATE STUDENTS, TEACHER’S TABLE, SEMINAR ROOM CHAIRS WITH WRITING TABLET, SEMINAR ROOM’S TABLE ETC. OF
VALUES 35 LACS AND ABOVE OF SINGLE WORK ORDER EXECUTED BY THE FIRM DURING THE LAST 5 YEARS UPTO JANUARY 2015
SN Name of the work & location
Nature of work Involved in the
contract
Name & address of the
owner & architect
The name & full address of the officer under whom the work was carried out. Also
indicate Academic Institutional client whether
Autonomous Body OR Central / State University OR
Big Reputed Private University/ College
Contract Amount
Completion Period
stipulated
Completion period actual
Whether the work was left incomplete or contract was terminated
from either side.
Give full details.
Any other relevant
information including reason,
if any, for delay in completion
of work.
SIGNATURE OF THE APPLICANT [WITH COMPANY SEAL]
Note: 1. Attach a separate sheet, if required in the same format as prescribed above.
2. Projects completed should be supported by the copy of completion certificate issued from the competent authority on the said project attested by gazzeted officer / notary. 3. Similar works means Manufacturing of Class room’s furniture consisting of Three seater and Two seater with desk and benches for undergraduate students, Teacher’s Table, Seminar Room chairs with writing tablet, Seminar room’s table etc. for Academic Institutional client whether Autonomous Body OR Central / State University OR Big Reputed Private University / College…etc. 4. Non-availability of any of the said supporting documents will disqualify the bidder / tenderer automatically.
PERFORMA - B
BASIC INFORMATION OF THE BIDDER
SI. Particulars Information
1 Name of the manufacturing organization
2 Type of Organization - Whether Proprietorship,
Partnership, Private Limited
3 Name of the Directors in the organization 1. ……………………………. 2. ……………………………. 3. …………………………….
4
Details of Registration [Firm / Company etc.]
1. Registering Authority,
2. Date,
3. Number etc.
Registering Authority:
Date:
Number:
5 Experience in the respective field of work in Years
6 Name and address of the Bank/Bankers
8
Yearly turnover of the organization for the last 3
years ending 31st March 2017
[Please, enclosed copy of Audited Final Accounts
in support]
Year 2014-15
Year 2015-16
Year 2016-17
Details of Office:
1. Office address, 2. Telephone Number, 3.
Person to contact.
Telephone Number:
Person to contact:
Email:
9.
a.
Details of Manufacturing Unit:
Area of the factory [Supported by relevant paper i.e.,
copy of lease deed / rent agreement / registry of the
premises].
b. Relevant documents for said space being used as Factory
/ Manufacturing unit [Supported by copy of factory
license / excise duty registration certificate]
c. Details of following Tools & Machinery supported by self
attested photographs and certificate from chartered
accountant Details of Machinery : D.G. Set, Power Press
Machine, Press Break Machine, Shearing Machine, Air
Stapler Machine, Lathe Machine, Argon Welding Machine,
MIG Welding Machine, TIG Welding Machine, Bush Hand
Grinder, Stapler Machine, Shaping Machine, Grinder
Machine, Pipe Cutting Machine, Sq. Pipe Polish Machine,
Hydraulic CNC Tube [Pipe] Bending Machine, Round Pipe
Buffing Machine, Stitching Machine, Revit Machine, Drill
Machine, Air Compressor, Band Saw Machine, Sanding
Machine, Air Stapler Grinder, Saw Machine, Hi-Tech
Portable Welder & Welding Transformer and TIG Welding
Machines with Accessories.
10. Details of working on similar works i.e., Class room furniture
for undergraduate students for any Academic Institute
[Autonomous Body OR Central / State University OR
Reputed Big Private University / College. Furnish details in
Performa – A attached.
11. Details of Technical personnel employed in the
organization. Furnish details in Performa – C attached.
12. Indicate if involved in any litigation, arbitration or any civil
suits pending in any of the works executed during last 3
years / being executed. If yes, please furnish the name of
the project, employer, nature of work, contract value, work
order and date and brief details of litigation. Attach a
separate sheet if required.
13. Kindly mention if your firm / agency / company is
blacklisted / debarred by ………………………………….. If yes,
mention the relevant details.
SIGNATURE OF THE APPLICANT [WITH COMPANY SEAL]
Note: 1. Please fill / mark all rows, as NOT APPLICABLE where you cannot provide information. 2. Attach a separate sheet, if required in the same format as prescribed above. 3. List of machineries with model & make to be attached.
PERFORMA - C
LIST OF TECHNICAL PERSONNEL, GIVING DETAILS ABOUT THEIR TECHNICAL QUALIFICATION, EXPERIENCE, ETC. WHO ARE ON REGULAR PAY ROLE OF
THE COMPANY SINCE FROM FEBRUARY 2015
Sl. No.
Name Age in years
Qualification [Technical]
Experience in years
Nature of Similar works handled
Name of the projects handled costing more than
Rs. 28 Lacs of single job order
Date from which employed in
your organization
Any other remark
01.
02.
03.
04.
05.
SIGNATURE OF THE APPLICANT
[WITH COMPANY SEAL]
Note:
1. Attach a separate sheet, if required in the same format as prescribed above.
2. Technical qualification of said individual technical person employed should be supported by attested [gazzeted / notary] copy of technical
qualification documents [Diploma / Degree] along with copy of photo ID. Without said documents, details of said person would not be
considered and will lead to disqualify the bidders / tenderers automatically.
PRE-QUALIFICATION CRITERIA
1. The Tenderer should have at least min. 09 years of experience of working with nature of works i.e., Manufacturing of Class room’s furniture
consisting of Three seater and Two seater with desk and benches for undergraduate students, Teacher’s Table, Seminar Room chairs with writing
tablet, Seminar room’s table etc. 2. The Bidder / Tenderer who are registered 1. Factory license / District Industrial Corp. – II, 2. Registration with Excise Department, 3. Quality: Work
Process [ISO – 9001: 2008], 4. Environmental [ISO – 1400: 2004], 5. Occupational Health and Safety Assessment Series – OHSAS: 18001 – 2007 6.
Indian Green Building Council and having experience of executing above similar types of works under a single contract may apply with detailed
certificates / credentials to the ……………………................................................................................... 3. Pre – Qualification criteria shall consist of the following documents with Weightage and marks obtained. The documents shall be submitted duly
attested from gazetted officers / notary at the time of submission of tender forms / documents:
S. Criteria Weightage Marks
No. obtained
a. Completion certificate from the Academic Institutional client 25 _
[appropriate authority] stating nature of the project, value of the project, start and completion date of the project of the respective
works executed for the similar nature i.e., Manufacturing of Class
room’s furniture with desk and benches for undergraduate students,
Teacher’s Table, Seminar Room chairs with writing tablet, Seminar
room’s table etc. within a period of 5 years of date of publication of
Tender. Details of the project should be the same as mentioned
in Eligibility Criteria. Refer Performa - A b. Registration / Empanelment certificate from following Statutory / 20 _
Civic / Legislative Bodies
1. Factory license / District Industrial Corp. – II.
2. Registration with Excise Department.
3. PAN with latest ITCC
4. PF & ESIC latest deposit receipt
5. GST Certificate.
6. Turnover certified by CA
7. Quality: Work Process [ISO – 9001: 2008].
8. Environmental [ISO – 1400: 2004].
9. Occupational Health and Safety Assessment Series – OHSAS :
18001 – 2007.
c. Membership of BIFMA & Indian Green Building Council (IGBC) 20
d. Should have adequate in-house infrastructure with sound factory 25 establishment, equipped with said Tools & Machinery as referred in
Performa – B. e. Details of Technical Staff [Project Manager / Engineer / Supervisor] 10 _
in terms of Technical qualification & experience with copy of supporting documents [attested by gazetted officer / notary], who is
on company’s permanent roll for last 02 years up to January ending
2015 [Relevant supporting documents i.e. copy of Companies salary account / Copy of bank statement in which salary is being transferred / duly [Attested by Gazetted officer / Notary]. Refer Performa-C.
Note : Criteria mentioned above is just minimum requirement. The client at his discretion may upgrade the criteria. No complaint on this account will be
entertained. Agencies had to score in each discipline and that with Min. 85% marks and above will only be considered for pre-qualification. Bidder fail
to score Min. 85% in each discipline is automatically disqualified towards opening of Technical Bid, hence his Financial Bid will not be opened and hence
will not be considered for the said Bid for the respective project.
Description Qty Rate Amount (Rs.) Image
Merc- 01 High Back Chair
Type of Chair - High back Chair Revolving Chair
Chair in Moulded Ply with S.Steel Decorative Framing , PU foam in
Back & Moulded PU Seat, 3D Adjustable Arms, Knee Tilt
Mechanism, Antishock, Chrome Base, & Gas Lift.
4
Merc 03 : Low Back Chair
Type of Chair - Low Back Chair in Moulded Ply
with S.Steel Decorative Framing , PU foam in Back & Moulded PU Seat, 3D Adjustable Arms, Knee
Tilt Mechanism, Antishock, Chrome Base, & Gas Lift.
10
Desco 03 : Executive Table
SUPPLY OF FURNITURE FOR DIGITAL LIBRARY AT MGIMS, KHS, SEWAGRAM
Gokul Vyas ArchitectsMahadev Pura,
Wardha - 442001
Ph: +91-93-730-44555
Email : [email protected]
Table top of 25mm thk Board with two colour laminate combination with modesty and side runner,
One side leg in MS rectangle pipe duly powder coated (95mm x 25mm).
Table :- 1800mm(L) x 900mm(W) x 750mm(H)
Side Runner :- 1800mm(L) x 450mm(W) x 625mm(H)
4
Recp 01:
Top of 25mm thk Board with laminate on top, High front desk in designer shape for reception area
with 3 drawer pedestal Pedestal Unit :- 400mm(W) x 450mm(D) x 700mm(H) Table Size :-
1500L x 900D x 1200H
1
Grace 01 - High Back Revolving Chair
Type of Chair - High Back Revolving Chair Complete Chair frame in
chrome, Double Cushioned PU foam in seat& back , Chrome Arms & Chrome base, knee Tilt
Mechanism, & Gas Lift
4
Grace 03 : Medium Back Chair
Type of Chair - Medium Back Chair Complete Chair frame in
chrome, Double Cushioned PU foam in seat & back , Chrome Arms & Chrome base, knee Tilt
Mechanism, & Gas Lift
44
Kentra 01 : (Italian) Fix Chair
Type of Chair - Fix Chair Chair with PP moulded Shell
in seat & back with cushion on seat.Frame in MS Rectangle pipe 30mm x 15mm duly powder
coated.
384
Fly 01 : (Italian) Fix Chair-
Type of Chair :Chair with PP moulded Seat & back, Foldable seat with cushion & frame in
22mm dia Stainless Steel.
Fly 03 : (Italian) Fix Chair MRP:
Type of Chair :Chair with PP moulded Seat & back, with foldable cushion seat & frame in
22mm dia Stainless Steel . with arms.
Vegas Desking
Type of Table :Top of 25mm thk Board with laminate on top & white balancing laminate
below & Side Edges finished with PVC Edge banding With Soft board Screen, Table shall
have wire Management system,accessible from the table top on the horizontal surface. Flip
top to the flush of work surface.
Frame in MS square pipe of 40mm
1200x600 31
1200 x 1800 22
900 x 600- Silent Chambers 24
900 x 600- For Carrels 60
Yeye Bar stool -
Type of Chair : Fix Chair Chair with PP moulded
Seat & back . Frame in 19mm dia, 16 Guage of Stainless Steel.20
Rowone 08 : Phone Booth
Type of Chair : Highrise Fully upholstered Two seater Conversation Low seating Booth
Base frame in MS dully powder Coated.
Size : 1500mm W x 750mm D x 1700mm Ht
10
Pinnacle 08 :
Type of Sofa : Highrise Backrest fully upholstered in fabric.
Sofa Frame in combination of mild steel & hardwood.
Size :1650mm L(1710mm Out to Out) x 880mmW x 1400mmHt
5
Flexible 10 Puffy :
Type of Sofa :Round Puffy fully cushioned with inside frame in wood.
Size:- 400mm dia x 400mm Ht
20
Signature 32
Type of Sofa : Single Seater sofa chair with fully upholsterd in fabric with MS Legs
10
Cummins 01
Type of Sofa :Upholstered seat & back with injection
shaping PU foam on mild steel frame with aluminium swivel legs.
6
Woody 03
Type of Chair :Bottom frame is made of steam beach wood. Moulded foam in seat & back ,
Leatherite Upholstery on it
Size : 670(W) x600(D) x 460mm (Seat Height)
10
Cliff Sofa
Type of Chair : Fully Cushioned sofa with arms. Frame in Hardwood.Teakwood Legs at the
base dully polished.
Single Seater Sofa - 800mmW x 750mmD x 750mmH 1
Two Seater Sofa - 1400mmW x 750mmD x 750mmH 5
Three Seater Sofa - 2000mmW x 750mmD x 750mmH 2
Mars Centre Table
Rectangle Center Table With Clear Glass Top with
teakwood frame duly polished in wenge finish.
Size : 1200mm x 600mm
8
Dieto CP
Table With Laminated Top of 25mm thk, Edges finished with PVC Edge banding. Frame in
Stainless Steel with center pipe of 75mm dia & Bottom plate of MS base plate covered with
S. Steel plate of 1.2mm.
10
Olive 01: (Italian) Fix Chair
Type of Chair : PP moulded shell . Frame in 19mm dia, 16 Guage of Stainless Steel
40
Signature Sofa
Sofa with L shape Backrest. Inside frame in wood fully upholstered. With stainless Steel
Legs.
Size: 1800mm L x 750mm W x 450mm H (2 Seater)
10
Signature 01 :
A Set of Fully uphostered sofa with convertibleseating arrangement having inside Frame in
wood . Size : 1820mm L x 1940mm D x 400mm Ht Side semicercles = Set of 2
Semi circle Size : 1500mmm L x 750mm D x 400 Ht
1
Signature 04 :
A set of seating which creates meeting & group friendly enviorment within work space.
Circuler sofa with Backrest fully upholstered with inside frame in wood. Fixed with bush.
Size : 500mm L x 750mm D x 675mm H(Center Back)
( 2 pcs ) without Lamp
1
Signature 05 :
A Set of Semi Curverd sofa with backrest fully upholstered with inside frame in wood.
Bottom base in SS Legs.(3 Pcs Curverd Sofa)
1
Signature 29 :
3 Petalled flower seating
Frame in wood fully chushioned. Stainless steel legs.
Size : 1330mm Overall
1
Library 14
Single Racks- 7'-0''
Modular wall Unit having open Storage shelving all in Board with all side laminate
Size:- 2000mm W x 300mm D x 2100mm ht.
38
Library 16:
Double Racks- 7'-0''
Two side Shelving Storage book unit designed for compact spaces in MS Sheet metal with
sides laminated board.
Back to Back Size:- 900mm W x 600mm D x 2100mm ht.
100
Sub-Total -
Transportation
GST @
Grand Total