10 21 13/GLOBuyLine 0081

Global Solid Polymer Plastic

Floor Anchored

Perfect for low-ceiling washrooms.Sleek line across top of partitions adds amodern accent. Design and constructionensures easy installation. For concretefloors only, this style requires 2"minimum penetration into floor.Junior Height sizes are available.

Floor and Ceiling Anchored

This construction style is extremelystable and durable and is recommendedfor busy washrooms where abusivetreatment is prevalent and vandalresistance is critical. Requires concretefloor and structural ceiling supports.

Floor Anchored/Overhead Braced

Clean lines, modern appearance, andsolidly braced for new construction orrenovation, independent of floorcondition. The uniquepilaster construction,combines with anti-griphead rail bracing forstructural rigidity. Can be used withlight weight concrete or wood floors.

Ceiling Hung

Open design at the floor means easyaccess for better maintenance andreduced operating cost.

Goes hand-in-hand with wall-hung fixtures for full floor accessibility.Proper installation requires attachmentto structural ceiling support.

12″/30cm

58″147cm

14″/35cm

55″140cm

Varies

Polymer All Other Materials

12″/30cm

58″�147cm

70″�177cm

12″/30cm

58″147cm

83″211cm

14″/35cm

14″/35cm

55″140cm

Polymer All Other Materials

2

Global Styles

14″/36cm

Varies

Varies55″

140cm

12″/30cm

Varies

58″147cm

Polymer

For Polymer only4" Cross Bracing

All Other Materials

Phenolic - Color-Thru

Color-Thru Phenolic lives up to itsname, with surface color throughand through. This product is impact,scratch and graffiti resistant; it alsohas excellent screw holding powerand all the advantages of traditionalPhenolic performance. Available inall styles and attractive colors.

Powder Coated

High-tech quality at aneconomical price. Thermosettinghybrid powder finish ongalvannealed steel is highlyresistant to corrosion, grease,acids, caustics, mars and stains. Abroad range of contemporarycolors to complement any interior.Available in all styles.

3

Global Materials

Phenolic - Black Core

Holds up even under severemoisture conditions from showers,pools and saunas, or whenmaintenance includes hosing downtoilet partitions. Ideal for wherevandalism is a problem. In a fullcolor spectrum — all with blackedges. Available in all styles.

Plastic Laminate

Combining design flexibility,aesthetic appeal and economy in anideal finish—the proven benefits ofhigh pressure laminates are built in— featuring a smooth surfacehighly resistant to scratches, grease,and mars. Offered in a complement of designer colors. Available inall styles.

Polymer (HDPE)

Polymer (HDPE) is highly resistantto stains, common acids and cleaningagents as well as to moisture. Theideal choice for busy public facilities— never needs painting and will noteasily dent or chip. Available in awide variety of contemporary colors.Floor Anchored/ Overhead Braced,Ceiling Hung and Floor and CeilingAnchored styles.

Stainless Steel

Gleaming beauty indefinitely.The elegance of stainless steelcomplements any design scheme.Incorporates the known corrosionresistant benefits of type 304stainless steel. Easily maintained,even scratches can be buffed out.Satin or textured finish. Availablein all styles.

Warranty 15 years* Warranty 2 years* Warranty 10 years*

Warranty 10 years* Warranty 5 years* Warranty 3 years*

* See full warranty on website: www.globalpartitions.com

4

GLOBAL polymer toilet partitions arethe ideal choice for high-traffic areas.They are environmentally safe andsanitary, never need painting, and willnot easily dent or chip. It is the materialof choice for low maintenance.

HDPE solid polymer is water resistantand unaffected by high humidity orcorrosive environments and cannotdelaminate. Most commercial cleaningagents will not damage the surface.

GLOBAL HDPE polymer hashomogeneous color and materialcompound throughout. An aluminumheat sink strip is applied to the bottomedge of all doors and panels as standard.

Polymer Color Selection Guide

Simplified Mounting System

Attach mounting system, insertpilaster, adjust height and level byturning the lock nut adjusters.

Emergency Access

meets ADA requirements.Slotted keeper coupledwith gravity hinges allowsaccess in an emergency.

Theft-Resistant Fasteners

Special driver installsfasteners which virtuallyeliminates unauthorizedremoval and ensures easyinstallation.

55” High Doors and Panels

14” clearance from floor.

14"

FAST TRACK: 10 Working Days any standard color - in all three styles

Construction Features

9201 White 9235 Cream 9202 Tan

9200 Gray 9237 Charcoal 9231 Azure

9233 Moss 9203 Blue 9211 Burgundy

9205 Black 9217 Black Confetti

9502 Blue Sapphire 9501 GarnetSpeckle Speckle

OPTIONS:

8" Aluminum Hinges

Full Height Stainless Steel Piano Hinges

Integral Hinges

No Sight

Vault-Type Hinge

Rugged, attractive wrap-aroundhinge. Extra strong for heavy-duty installations.

Global Polymer (HDPE)

Full Height Stainless Steel Brackets

Full Height Aluminum Brackets

Full Height Plastic Brackets

Plastic Shoes

Shoe Construction

Stainless steel, type 304, with #4satin finish trim shoes are hemmedtop and bottom for rigidity and sleek appearance.

9500 Ivory Essence Speckle

9400 Folkstone Gray

5

Core

Particle boardcore is 45#density to resistwarping and ensure asmooth surface.

Edge

Construction

Face laminateoverlaps edgelaminate toensure waterrunoff andresistsvandalism. All edges arehand filed.

Door Hinges

Full weight-bearing hingeson both top and bottom ofeach door.Wrap-aroundmounting andthrough boltingfor vandalresistance.

Shoe

Construction

Stainless steel,type 304, with#4 satin finishtrim shoes arehemmed topand bottom for rigidity and sleekappearance.

Theft-Resistant

Fasteners

Special driverinstalls fastenerswhich virtuallyeliminates unauthorized removal andensures easyinstallation.

Plastic Laminate Construction Features

�����������

��

OPTIONS:

Steel Core Pilasters

Plywood Core

Full Height Aluminum Brackets

Full Height Stainless Steel

Brackets

Full Height Piano Hinges

European & Eastern Style

Heights

Global Plastic LaminateGLOBAL plastic laminate partitions combinedesign flexibility with affordable cost. The highpressure laminate finishes, bonded under pressureto a solid impact-resistant particle board core, meetor exceed all NEMA standards. Edge banding ofall components prior to face lamination ensuresoptimum water runoff and durability.

GLOBAL plastic laminate is available in all fourinstallation styles and a variety of designer colors tocomplement vanities and counter tops. They arethe finish of choice for commercial and institutionalinstallations where aesthetics are essential.

Color Selection Guide

1010Mission White

1020Antique White

4000Almond

4010Sand

4410Natural Canvas

4300Lime Stone

4583Desert Zephyr

4040Khaki Brown

*4516Windswept Tan

9680Lodestone

3713Canyon Zephyr

9096Taupe

3000Silver Gray

3010Dove Gray

3520Tundra Terra

7400Lapis Envision

7010Brittany Blue

7318Navy Grafix

4611 Natural Tigris 4777 MDF Solidz 4801Tungsten EV

9208Beluga Beige

*9292Windswept Bronze

5058Burnished Ember

*3849Windswept Pewter

3542Storm Solidz

3554Olive Legacy

9310Cotta Stone

3020Graphite Grafix

3612Twilight Zephyr

6010Silver Moss

9487Oxide

2150Graphite

6035Hunter Nebula

4215Earthen Terra

5000Burgundy

9176Burnished Chestnut

2000Black

*9918Maple

*9954Cherry

*9939Mahogany

1130Neutral Glace

3330Ebony Granite

FAST TRACK: 10 WORKING DAYS Any standard color - in all four styles.

9261Ochre Roletta

3300Folkstone Celesta

6

Construction Features

Color Selection Guide

Global Phenolic - Black Core

GLOBAL phenolic partitions are the materialof choice where durability and strength arerequired. These partitions are fabricated tostand the test of time. The dense components,combined with stainless steel brackets andfasteners, stand up to the most extremeconditions of moisture and humidity.Phenolic is impact, water, and corrosionresistant, and does not support bacteria.

The phenolic partition is decoratively facedon both sides as an integral part of a resin-impregnated kraft paper core. The surfaceand core sheets are fused at high temperatureand pressure. In addition to strength andserviceability, a wide range of colorsprovides limitless design flexibility.GLOBAL phenolic partitions are available inall four installation styles.

SHOE CONSTRUCTIONStainless steel,double-hemmed,trim shoe with #4 satin finishconceals mounting fasteners andhardware.

VANDAL- RESISTANTFASTENERSSpecial driver installsfasteners, virtuallyeliminating unauthorizedremoval, and ensuringeasy installation.Stainless steel fastenersare standard for phenolic partitions.

VAULT-TYPE HINGERugged, attractivewrap-around hinge.Extra strong forheavy-dutyinstallations.

Hunter Nebula6035

Almond4000

Silver Gray3000

Natural Canvas4410

Graphite Grafix3020

Ebony Granite3330

Dove Gray3010

Neutral Glace1130

Folkstone Celesta3300

Burgundy5000

FAST TRACK: 10 WORKING DAYS Any standard color - in all four styles.

OPTIONS:

Class "A" Fire Rated Material

Full Height Piano Hinges

Full Height Stainless Steel Brackets

European & Eastern Style Heights

No Sight

EMERGENCY ACCESSmeets ADArequirements.Slotted keepercoupled withgravity hingesallows access inan emergency.

Global Shower Products

7

GLOBAL Color-Thru Phenolic providesanother reason to choose phenolic. True to itsname, Color-Thru is made with surface colorthrough and through, to help resist damage;and even discourage vandalism and abuse.Along with phenolic strength, durability andlow maintenance requirement, Color-ThruPhenolic is impact, scratch and graffitiresistant; also it has excellent screw holdingpower and all the advantages of traditionalPhenolic performance. Costs no more thanregular Global phenolic compartments.

Same construction features and hardware asGlobal Black-Core Phenolic.

GLOBAL Shower Dividers and Dressing Boothsare strong and durable to hold up in publicshower areas. GLOBAL offers materials thatresist penetration by water, steam, mildew, odorsand soap. The clean, modern design is attractiveas well.

GLOBAL Dressing Booths enhance showerinstallations—available with door or curtainoptions. Choose from solid plastic, phenolic,stainless steel or powder coated steel materials.

Physically Challenged

Specially designed units are available for the physicallychallenged, with a wider front entry for easy wheelchairaccess. Reinforced walls give added strength for grabbars and seat.

Color Selection Guide

Camel4350C

Red Clay5350C

Black2000

Sea Spray6260C

6350CMoss

COLOR-THRU: 10 WORKING DAYS Any standard color - in all four styles.

Global Phenolic - Color-Thru

8

Honeycomb

Core is made of cellularhoneycomb. Thistype of coreprovides strongconstruction andsoundattenuation.

Welded Corner

Corners ofpanels, pilastersand doors arewelded to eachother and to theadjacent facesheets.

Theft-Resistant

Fasteners Specialdriver installsfasteners whichvirtuallyeliminatesunauthorizedremoval andensures easyinstallation.

Global Stainless Steel

Upper Door

Bracket is aninternal part of the door. A pin goesthrough doorand bracket for three-pointbearing andoperates in anylon bushingin upper hingebracket.

Bottom Door

Hinge Gravitypositioning hingeprovides safe,durable, andmaintenancefree support.

Concealed

Latch withemergencyaccess andADA lever handle.

OPTIONS:

Plywood Core

No Sight Line

Full Height Aluminum

Brackets

Full Height Stainless Steel

Brackets

Powder Coated Full

Height Brackets and Shoes

European & Eastern

Style Heights

Stainless Steel Stirrup

Brackets

GLOBAL stainless steel toilet partitions are virtuallyindestructible and retain theirgleaming beauty indefinitely.These units combine the strengthof #304 stainless steel with a #4 satin finish or textured finish, formed and bonded to ahoneycomb core. The face sheetsare held rigid and permanently in place by an interlocking strip welded at each corner.

GLOBAL stainless steelcomponents are impervious to just about any substance. Even scratches caused bydeliberate vandalism can beremoved by buffing. Theelegance of GLOBAL stainlesssteel components complementsany design scheme, either in new construction or forrenovations.

FAST TRACK: 48 Hour Shipping

In #4 Satin Finish. Floor Anchored/Overhead Braced.

Leather finish

Construction Features for Stainless Steel and Powder Coated

Textured finishes

Diamond finish

9

Global powder coated steelpartitions provide high-techquality at an economical price.The powder coated finish iselectrostatically applied overstretcher level quality steel. The finish is highly resistantto wear, fading, staining,scratching and scuffing. It iseasily cleaned with mild soapand wiped dry.

The steel is electrogalvanized to protect against corrosion and provide a proper base for the finish. The face sheets areheld rigid and permanently inplace by an interlocking stripwelded at each corner. The core is cellular honeycombwhich provides strongconstruction and maximumsound attenuation.

Global offers a full color paletteof popular colors for designflexibility.

2129 White 2125 Gray 2123 Charcoal 2127 Black

2148 Burgundy 2107 Terra Cotta 2101 Azure 2135 Royal Blue

Powder Coated Color Selection Guide

2150 Sandy Beach 2141 Sage 3590 Pepper Dust

FAST TRACK: 48 Hour Shipping

Available in all standard colors shown below-Floor Anchored/Overhead Braced.

Pilaster

Mounting

Pilasteradjustments,with floor-mounted jack-leveling deviceis standard onfloor anchored/overhead bracedpilasters.

Alternate

Pilaster

Mounting

This heavygaugemounting isfurnished on all ceilinghung and floor anchoredpilasters.

Shoe

Construction

One-piecestainless steel,type 304, with#4 satin finishtrim shoes arehemmed topand bottom for rigidity and sleekappearance.

2115 Khaki 2103 Almond 2109 Dark Khaki 2145 Red

Global Powder Coated

10

PHENOLIC - COLOR-THRU

Solid core, comprised of multiple layers ofkraft paper, phenolic resin and decorative facesheets, all of the same color, shall be fusedtogether under high temperature and pressure.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors shall be constructed of 3/4" color-thruphenolic.Panels shall be constructed of 1/2" color-thruphenolic.

Pilasters shall be constructed of 3/4" phenolicPilaster shall include a mounting systemcomprising a 1/4" thick x 3/4" wide stainlesssteel base bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to the buildingstructure with two 3/8" cadmium plated selfanchoring studs.

a. All exposed door hardware shall be die castaluminum and shall be as noted:1. Heavy-duty die cast vault hinge shall have abrushed finish and have wrap-around flanges.The gravity acting cams shall be constructedfrom 3/4" diameter nylon rod and 3/8"diameter stainless steel pin. Hinges shall bethrough-bolted onto doors and pilasters usingstainless steel, theft-resistant through bolts.Hinges shall be easily adjusted at jobsite to afully closed or partially opened position.2. Slide latches, strikes and keepers shall bedie cast Zamac with a brushed finish. Keepersshall provide for emergency access into thestall by lifting up on the bottom of the door.b. Hardware includes coat hook, bumper, stopand keeper, and all necessary fasteners forinstallation.c. Brackets for panel to wall and panel topilasters attachment shall be stainless steelstirrup. Optional full height stainless steelbrackets are available at an additional cost.d. Pilaster shoes shall be of type 304 stainlesssteel with a #4 finish.e. Fasteners shall be stainless steel; doorhinges to be mounted with theft-resistantthrough bolts; hooks and handles will bemounted with theft-resistant full-threadscrews.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to be anodizedaluminum with satin finish, contoured toprovide anti-grip features.

All surfaces to be covered with decorativelaminate matching the color-thru core. Alledges being finished.

Colors shall be selected from themanufacturer's standard range of colors (seepage 7).

PLASTIC LAMINATE

High-pressure decorative plasticlaminate .050" (1.2 mm) thick bondedwith non-toxic water resistantadhesive under high pressure to 45-lb(20.4-kg) density resin impregnatedparticle-board.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors and panels finished thickness to be 1".Doors to be recessed to accept hinges withinthe plane of the door and yield bi-directionaloperation about an axis within the plane ofthe door.

Pilasters shall be 1-1/4" thick. Pilastersshall include a mounting systemcomprising a 1/4" thick x 1" wide steelbase bar with 3/8"steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self-anchoring studs.

a. Door hardware shall be chromiumplated die cast Zamac on all exposedparts and shall be as noted:1. Hinges shall be recessed into doorand saddle mounted on the adjacentpilaster. Hinges shall be adjustable forpartial opening or self-closing of doors.2. Slide latches shall be mounted at themid-point of the door. Keepers shall bedesigned and installed permittingemergency access to the compartmentby lifting the door until the latch bolt isclear of the keeper.b. Hardware includes coat hook,bumper, stop and keeper, and allnecessary fasteners for installation.c. Brackets for panel to wall and panelto pilasters attachment shall bechromium plated die cast Zamac.Optional full height aluminum orstainless steel brackets are available atan additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish.e. Fasteners shall be chrome-platedsteel; door hinges to be mounted withtheft-resistant through bolts; hooks andhandles will be mounted with theft-resistant full thread screws. -headrailshall be provided to bridge allcompartments. The headrail to beanodized aluminum with satin finish,contoured to provide anti-grip features.

All face and edge surfaces to becovered with decorative laminate.Edges shall be laminated prior to facesheets to enhance vandal resistanceand water run off.

Colors shall be selected from themanufacturer's full range of colors (seepage 5).

PHENOLIC - BLACK CORE

Solid core with decorative laminate on bothsides. Material has multiple layers of resin-impregnated kraft and surface sheets fusedat high temperatures and pressure. All edgesare black.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors shall be constructed of 3/4" black corephenolic.Panels shall be constructed of 1/2" black corephenolic.

Pilasters shall be constructed of 3/4" phenolicPilaster shall include a mounting systemcomprising a 1/4" thick x 3/4" wide stainlesssteel base bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to the buildingstructure with two 3/8" cadmium plated selfanchoring studs.

a. All exposed door hardware shall be diecast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shall havea brushed finish and have wrap-aroundflanges. The gravity acting cams shall beconstructed from 3/4" diameter nylon rod and3/8" diameter stainless steel pin. Hingesshall be through-bolted onto doors andpilasters using stainless steel, theft-resistantthrough bolts. Hinges shall be easily adjustedat jobsite to a fully closed or partially openedposition.2. Slide latches, strikes and keepers shall bedie cast Zamac with a brushed finish.Keepers shall provide for emergency accessinto the stall by lifting up on the bottom of thedoor.b. Hardware includes coat hook, bumper, stopand keeper, and all necessary fasteners forinstallation.c. Brackets for panel to wall and panel topilasters attachment shall be stainless steelstirrup. Optional full height stainless steelbrackets are available at an additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish.e. Fasteners shall be stainless steel; doorhinges to be mounted with theft- resistantthrough bolts; hooks and handles will bemounted with theft-resistant full-threadscrews.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to be anodizedaluminum with satin finish, contoured toprovide anti-grip features.

All face surfaces to be covered withdecorative laminate. All edges beingfinished.

Colors shall be selected from themanufacturer's full range of colors (seepage 6).

MATERIAL INFORMATION

TYPES AVAILABLE:

DOORS ANDPANELS:

PILASTERS:

HARDWARE:

FINISH:

COLORS:

SpecificationsPOLYMER (HDPE)

High-density polyethylene (HDPE) resinswith homogeneous color throughout.

a. Floor Anchored Overhead Bracedb. Floor and Ceiling Anchoredc. Ceiling Hung

Doors and panels to be 1" thick and 55"high and have an extruded aluminumheat sink strip attached to the loweredge.

Pilasters shall be 1" thick. Pilaster shallinclude a mounting system comprising a1/4" thick x 1" wide stainless steel basebar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self anchoring studs.

a. All exposed door hardware shall be die cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shallhave a brushed finish and have wrap-around flanges. The gravity acting camsshall be constructed from 3/4" diameternylon rod and 3/8" diameter stainlesssteel pin. Hinges shall be through-boltedonto doors and pilasters using stainlesssteel, theft- resistant through bolts.Hinges shall be easily adjusted at jobsiteto a fully closed or partially openedposition. Optional integral hinge,stainless steel piano hinge or 8" hingeavailable.2. Slide latches, strikes and keepers shallbe die cast with a brushed finish. Keepersshall provide for emergency access intothe stall by lifting up on the bottom of thedoor.b. Hardware includes coat hook, bumper,stop and keeper, and all necessaryfasteners for installation.c. Brackets for panel to wall and panel topilasters attachment shall be heavy dutyaluminum stirrup. Optional full heightPVC, aluminum or stainless steelavailable at an additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish. Optionalplastic shoes available.e. Fasteners shall be stainless steel; doorhinges to be mounted with theft-resistant through bolts; hooks andhandles will be mounted with theft-resistant full-thread screws.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to beanodized aluminum with satin finish,contoured to provide anti-grip features.

Homogeneous color throughout withuniformly machined edges.

Colors shall be selected from themanufacturer's full range of colors (seepage 4).

11

MATERIAL INFORMATION

TYPES AVAILABLE:

DOORS ANDPANELS:

PILASTERS:

HARDWARE:

FINISH:

COLORS:

STAINLESS STEEL

Stretcher-leveled quality type 304 stainless steel, formed and bonded underpressure with a non-toxic adhesive to a resin-impregnated, sound-deadening,honeycomb core.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors and panels shall be 1" thick, constructed of two sheets of 22 gaugestainless steel. The perimeter shall be sealed with a 22 gauge interlockingmolding. Molding corners shall be welded to each other and to face sheetsand ground smooth to form a rigid frame around the component.

a. Floor Anchored Overhead Braced Pilasters shall be 1-1/4" thick constructedof two sheets of 22 gauge stainless steel. Vertical edges shall be sealed with22 gauge interlocking molding. An inverted stirrup shall be welded within thebase of each pilaster with a jack bolt for leveling during installation andpermanent load support. "L" brackets shall be coupled to the stirrup bracketand floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1/4" thick, constructed of two sheets of18 gauge stainless steel. Vertical and top edges shall be sealed with 22gauge interlocking molding. An 11 gauge slotted stirrup bracket shall bewelded in the base of each pilaster. Two 3/8" diameter cadmium-platedstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-1/4" thick, constructed of two sheets of18 gauge stainless steel. Vertical and bottom edges shall be sealed with 22gauge stainless steel interlocking molding. An 11 gauge slotted stirrupbracket shall be welded to the top of each pilaster. Two 3/8" diametercadmium-plated studs anchor the mounting bracket to overhead structuralsteel members.d. Floor and Ceiling Anchored Pilasters shall be 1-1/4" thick, constructed oftwo sheets of 22 gauge stainless steel. Vertical edges shall be sealed with22 gauge interlocking molding.

a. Door hardware shall be chromium-plated die cast Zamac on all exposedparts and shall be as noted:1. Upper door hinge is recessed and interlocked in door and includes a nylonpin within the door. Lower door hinge is recessed in the door and includesmating box, pintle and nylon cams, which provide the bearing surface. Thecams are adjustable to allow the door to rest at any position within a 270-degree range.2. All concealed latches shall be mounted at mid-point of the door. b. Hardware includes coat hook, bumper, stop and keeper, and all necessaryfasteners for installation. c. Brackets for panel to wall and panel to pilaster attachment shall bechromium-plated die cast Zamac.d. Pilaster shoes shall be of type 304 stainless steel with a #4 finish.e. Fasteners shall be of chrome-plated steel; door hinges will be mountedwith theft-resistant through bolts; hooks and handles will be mounted withtheft-resistant full-thread screws.f. Floor Anchored Overhead Braced only - headrail shall be provided to bridgeall compartments. The headrail to be anodized aluminum with satin finish,contoured to provide anti-grip features.

All components shall be #4 satin finish stainless steel and shall be covered with avinyl film for protection during shipment and installation.

Stainless steel #4 satin finish is standard. Optional leather grain or diamondtextured stainless steel is available at additional cost.

SpecificationsPOWDER COATED

Stretcher-leveled quality galvannealed steel, formed and bonded underpressure with a non-toxic adhesive to a resin-impregnated, sounddeadening honeycomb core. Hybrid resin powder which is electrostaticallycharged, is sprayed onto the surface then heated fused in a curing oveninto a smooth coating.

a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored

Doors and panels shall be 1" thick, constructed of two sheets of 22 gaugesteel. The perimeter shall be sealed with a 22 gauge interlocking molding.Molding corners shall be welded to each other and to face sheets andground smooth to form a rigid frame around the component.

a. Floor Anchored Overhead Braced Pilasters shall be 1-1⁄4" thick constructedof two sheets of 22 gauge steel. Vertical edges shall be sealed with 22gauge interlocking molding. An inverted stirrup shall be welded within thebase of each pilaster with a jack bolt for leveling during installation andpermanent load support. "L" brackets shall be coupled to the stirrupbracket and floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1⁄4" thick, constructed of two sheets of18 gauge steel. Vertical edges shall be sealed with 22 gauge interlockingmolding. The top of each pilaster shall be sealed with 22 gaugeinterlocking molding. A 11 gauge slotted stirrup bracket shall be welded inthe base of each pilaster. Two 3⁄8" diameter cadmium-plated self anchoringstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-1⁄4" thick, constructed of two sheets of18 gauge steel. Vertical and bottom edges shall be sealed with 22 gaugeinterlocking molding. A 11 gauge slotted stirrup bracket shall be weldedto the top of each pilaster. Two 3⁄8" diameter studs anchor the mountingbracket to overhead structural steel members. d. Floor and Ceiling Anchored Pilasters shall be 1-1⁄4" thick, constructed oftwo sheets of 22 gauge steel. Vertical edges shall be sealed with a 22gauge interlocking molding.

a. Door hardware shall be chromium-plated die cast Zamac on all exposedparts and shall be as noted:1. Upper door hinge is recessed and interlocked in door and includes anylon pin within the door. Lower door hinge is recessed in the door andincludes mating box, pintle and nylon cams, which provide the bearingsurface. The cams are adjustable to allow the door to rest at any positionwithin a 270-degree range.2. All concealed latches shall be mounted at mid-point of the door.b. Hardware includes coat hook, bumper, stop and keeper, and allnecessary fasteners for installation.c. Brackets for panel to wall and panel to pilaster attachment shall bechromium-plated die cast Zamac.d. Pilaster shoes shall be of type 304 stainless steel with a #4 finish.e. Fasteners shall be of chrome-plated steel; door hinges will be mountedwith theft-resistant through bolts; hooks and handles will be mounted withtheft-resistant full-thread screws.f. Floor Anchored Overhead Braced only - headrail shall be provided tobridge all compartments. The headrail to be anodized aluminum with satinfinish, contoured to provide anti-grip features.

All components shall be cleaned prior to the application of polyesterpowder coating.

Colors shall be selected from the manufacturer's full range of colors (seepage 9). Custom colors available at additional cost.

12

Specifications:

If you need complete specifications or additional information, you will find it on our website:www.globalpartitions.com and on Sweet’s CD(http://www.SWEETS.com)

You can also secure specifications throughARCAT SpecDisk, available upon request oron the internet at www.ARCAT.com.

As always, GLOBAL’s customer service isready to assist you with any and all needs!

The color charts shown in this catalog areprinted reproductions and are fordescriptive purposes only. Color selectioncards are available upon request. Globalreserves the right to change specificationsand products without notice.

ADA Code Requirements:

Global has been a pioneer in thedesign of facilities for thephysically challenged. Our

engineers stand ready to assist in layoutdesign to meet code or specialrequirements.

2171 Liberty Hill Road

Eastanollee, GA 30538

TEL: 706-827-2700

FAX: 706-827-2710

Website: www.globalpartitions.com

E-mail: sales@globalpartitions.com

© 2007 Global Partitions

Global Privacy and UrinalScreens are available inthree, easy to maintainmounting configurations andare offered in six materials:polymer, plastic laminate,phenolic-black core,phenolic-color-thru, stainlesssteel and powder coated.Construction styles includewall hung, floor anchoredand post-to-ceiling screens.

Wall Hung Screens

Standard sizes:24" x 42", 18" x 42", 12" x 42".

Floor Anchored Screens

6" wide pilasters, 58" high panels by depthrequired.

Post-to-Ceiling Screens

Post 1-3/4" sq. x 10' satinfinish aluminum.

Global Privacy and Urinal Screens

Distributed by: