10.6 schedule of accreditation issue no: 2/ issue date: 5...
TRANSCRIPT
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 1 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Testing Laboratory No. ATL 0038
is accredited by the GCC Accreditation Center (GAC) in accordance with the recognized International Standard ISO/IEC 17025:2005, “General requirements for the competence of testing and calibration laboratories”
SGS Inspections Services Saudi Arabia Ltd
Issue No: 2 Issue Date: 5 November 2017
Address:
SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail - 31951, Saudi Arabia. Kingdom of Saudi Arabia
Contact: Dr Abdul Kader
Tel No: +966 13 340 00 44 Fax No: +966 13 342 02 12 Mobile : 00966 541200399
Email : [email protected] Web Address: www.sgs.com
Locations where testing activities covered by the above Accreditation Standard are undertaken
1 - Address: SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail - 31951
For the following scope:
7. Chemical Testing: 7.81 Constituents of the environment 7.21 Miscellaneous petroleum products
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 2 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Scope details are as follows:
TEST CATEGORY ITEMS, MATERIALS
OR PRODUCTS TESTED SPECIFIC TESTS
OR PROPERTIES MEASURED SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
Jubail Branch – Environment
Chemical testing (Environmental)
Water/Wastewater
pH APHA 4500 - H+B
Total Suspended solids APHA 2540 D
Total Dissolved Solids APHA 2540 C
Oil & Grease APHA 5520B
Dissolved Oxygen APHA 4500-O G
Electrical Conductivity APHA 2510 B
Salinity APHA 2520 B
Residual Chlorine APHA 4500 Cl G
Turbidity (NTU) APHA 2130 B
Total Alkalinity (as mg/l CaCO3) APHA 2320 B
Sulphide APHA 4500-S2- D
Cations by IC ASTM 6919-09
Oxyhalides by IC APHA 4110 D
Anions by IC APHA 4110 B
Cyanide APHA 4500-CN E
Total Kjeldahl Nitrogen APHA 4500 Norg B
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 3 of 12
Date: 5 January 2016
Approved by: Brahim Houla
TEST CATEGORY ITEMS, MATERIALS
OR PRODUCTS TESTED SPECIFIC TESTS
OR PROPERTIES MEASURED SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
Total Phenols APHA 5530 D
Silica APHA 4500-SiO2 D
Total Nitrogen ASTM D 5276-08
Total Organic Carbon APHA 5310 C
Metals by ICP-MS USEPA 200.8/APHA 3125 B
Metals by ICP-OES USEPA 200.7/APHA 3120 B
Semivolatile USEPA 3510C / 8270 C
TPH (C6-C9) USEPA 5021A / 8015 B
TPH (C10-C35) USEPA 3510 C / 8015 B
Contaminated Soil and Waste water
Metals by ICP-MS USEPA 3051 A/3052/6020 A
Metals by ICP-OES USEPA 3051 A/3052/6010 C
Volatile Organic Compounds USEPA 5021A / 8260 B
Contaminated Soil Semivolatile USEPA 3540C / 8270 C
TPH (C10-C35) USEPA 3540C / 8015 B
TPH USEPA 9071B
Soil Total Kjeldahl Nitrogen ASTM E258-67(2002)
Sodium Absorption Ratio (SAR) Calculation
TPH (C6-C9) USEPA 5021A / 8015 B
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 4 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Jubail Branch – OGC
Chemical Testing (OGC Scope)
Petroleum Products Bromine Number ASTM D1159
Colour of Clear Liquids (Platinum Cobalt Scale) ASTM D1209
Density, Relative Density, API of Liquid Petroleum Prods by Hydrometer ASTM D1298
Corrosiveness to Copper from Pet Products by Copper Strip Test ASTM D130
Hydrocarbon Types by FIA ASTM D1319
Smoke Point of Kerosine and Aviation Turbine Fuel ASTM D1322
ASTM Colour ASTM D1500
Saybolt Color of Petroleum Products ASTM D156
Water and Sediment in Fuel Oils by the Centrifuge Method
ASTM D1796
Naphthalene in Aviation Fuels ASTM D1840
Conradson Carbon Residue ASTM D189
Oxidation Stability of Distillate Fuel Oil (Accelerated Method) ASTM D2274
Freezing Point of Aviation Fuels ASTM D2386 / ASTM D7153
Cloud Point ASTM D5771
Cold Filter Plugging Point ASTM D6371
Conductivity of Aviation and Distillate Fuels ASTM D2624
Water and Sediment in Distillate Fuels by Centrifuge ASTM D2709
Bromine Index of Petroleum Hydrocarbons by Electrometric Titration ASTM D2710
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 5 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Boiling Range Distribution by GC (Sim Dist) ASTM D2887
Base Number by Potentiometric Perchloric Acid Titration ASTM D2896
(Thiol Mercaptan) Sulfur in Gasoline, Kerosene, Distillate Fuels ASTM D3227
Vapour Pressure of Petroleum Products (Reid Method) ASTM D323
Thermal Oxidation Stability of Aviation Turbine Fuel (JFTOT Procedure) ASTM D3241
Acidity in Aviation Turbine Fuels ASTM D3242
Air Release Properties of Petroleum Oils ASTM D3427
Diesel Fuel Diluent in Used Diesel Engine Oils by GC ASTM D3524
Calculated Heat Val, Comp Factor and Rel Density of Gaseous Fuels ASTM D3588
Gum Content in Aviation Fuels by Jet Evaporation Method ASTM D381
Dissolved Gases in Electrical Insulating Oil by GC-Headspace ASTM D3612C
Water Separation Characteristics of Aviation Turbine Fuels (MSEP) ASTM D3948
Density, Relative Density, and API Gravity of Liquids by Densitometer ASTM D4052
Sulfur in Petroleum and Pet. Products by Energy Dispersive X-Ray ASTM D4294
Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445
Carbon Residue (micro method) ASTM D4530
Sediments in Crude Oils and Fuel Oils by Extraction Method ASTM D473
Ash from Petroleum Products ASTM D482
Oxidation Stability of Gasoline - Induction Period Method ASTM D525
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 6 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Hydrocarbon Type Analysis in Petroleum Distillates through 200°C ASTM D5443
Particulate Contamination in Aviation Fuels ASTM D5452
Total Sulfur in Light Hydrocarbons and Fuels by UVF ASTM D5453
Flash Point by TAG Closed Cup Tester ASTM D56
Hydrogen Sulfide in the Vapour Phase above Residual Fuel Oils ASTM D5705
Lubricity of Diesel Fuels by HFRR ASTM D6079
Particulate Content of Middle Distillate Fuels ASTM D6217
Sulfur Compounds in Natural Gas and Gaseous Fuels by GC/FPD ASTM D6228
Water in Petroleum Products by Coulometric KF ASTM D6304
Aromatic Hydrocarbon Types in Aviation Fuels by HPLC ASTM D6379
Aromatic Hydrocarbon Types in Middle Distillates by HPLC ASTM D6591
Acid Number of Petroleum Products by Potentiometric Titration ASTM D664 (Method A)
Dynamic Viscosity and Density of Liquids by Stabinger Vscosimeter ASTM D7042
Elements by ICP in Middle Distillate Fuels ASTM D7111
Oxygenates in C2, C3, C4, and C5 Hydrocarbons by GC/FID ASTM D7423
Distillation of Petroleum Products at Atmospheric Pressure ASTM D86
Flash Point by Pensky-Martens Closed Cup Manual Tester ASTM D93 Flash Point by Pensky-Martens Closed Cup Automatic
Tester
Water in Petroleum Products and Bituminous Materials by Distillation ASTM D95
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 7 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Pour Point of Petroleum Products ASTM D97 /ASTM D5950
Acid Number by Colour-Indicator Titration ASTM D974
Conditional Monitoring of In-Service Lubricants by FTIR ASTM E2412
Determination of Asphaltenes (n-Heptane Insolubles) IP 143
Copper Strip Tarnish Test IP 154
Abel Flash Point - Closed-Cup method IP 170
Cold Filter Plugging Point (CFPP) IP 309
Sediment in Residual Fuel Oils and Distillate Blends by Filtration IP 375
Total Sediments in Residual Fuels - Potential & Accelerated IP 390 / ASTM D4870
Elements in Residual Fuel Oil by ICP IP 501
Level of Cleanliness of Aviation Turbine Fuel IP 565
Hydrogen Sulfide in Fuel Oils – Rapid Liquid Phase Extraction Method IP 570
H2S and Mercaptan Sulphur in Liquid Hydrocarbons UOP 163
Trace Metals in Oils by Wet Ashing and ICP-OES UOP 389
Chloride in Petroleum Distillate by Microcoulometry UOP 779
Mercury and Mercury Species in Liquid Hydrocarbons UOP 938
Petrochemicals Water in Volatile Solvents by KF ASTM D1364
Benzene, Toluene, Xylene (BTX) Concentrates Analysis by GC ASTM D6563
Hydrocarbon Types, Oxygenated Compounds and Benzene by GC ASTM D6839
Insulating oils Furanic Compounds in Electrical Insulating Liquids (HPLC) ASTM D5837
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 8 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Elements in Insulating Oils by ICP-AES ASTM D7151
Power Disspation Factor and Relative Permittivity of Insulating Oils ASTM D924
Interfacial Tension of Oil against Water by the Ring Method ASTM D971
Breakdown Voltage at Power Frequency of Insulating Liquids EN 60156 / IEC 60156
DDF (Tan d) / Rel. Permittivity / d.c. Resistivity EN 60247 / IEC 60247
Water Content by Coulometric KF Titration EN 60814 / IEC 60814
Insulation liquids Specific Resistance of Electrical Insulating Liquids ASTM D1169
Water by Coulometric Karl Fischer Titration ASTM D1533
Sediments and Soluble Sludge in Service-Aged Insulating Oils ASTM D1698
Dielectric Breakdown Voltage of Oil ASTM D1816
Dielectric Breakdown Voltage of Insulating Liquids ASTM D877
Lube oils Water Separability of Petroleum Oils and Synthetic Fluids ASTM D1401
Trace Sediment in Lubricating Oils by Centrifuge ASTM D2273
Additive Elements in Lubricating Oils by ICP ASTM D4951
Elements in used Lube Oils and Base Oils by ICP-AES ASTM D5185
Foaming Characteristics Seq I, 2 & 3 ASTM D892
Insolubles in used Lubricating Oils ASTM D893
Flash and Fire Points by Cleveland Open Cup Tester ASTM D92
Corrosive Sulphur in Used and Unused Lubricating Oils IEC 62535
Crude oil Salts in Crude Oil (Electrometric Method) ASTM D3230
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 9 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Water in Crude Oil by Distillation ASTM D4006
Sediment and Water in Crude Oil (Centrifuge) ASTM D4007
Water Content of Crude Petroleum by Potentiometric KF ASTM D4377
Water in Crude Oils by Coulometric Karl Fischer Titration ASTM D4928
Organic Chloride in Crude Oil by Combustion and Microcoulometry ASTM D4929 (Method B)
Density and Relative Density of Crude Oils by Digital Density Meter ASTM D5002
Pour Point of Crude Oils ASTM D5853
Turbine oil Oxidation Stability of Steam Turbine Oils ASTM D2272
Hind. Phenolic & Arom. Amine Oxidants in non-zinc Turbine Oils ASTM D6971
Natural gas Analysis of Natural Gas by GC ASTM D1945
Real Natural Gas - Calc. of C.V, D, R.D, W.I from Composition ISO 6976 (Real Gas)
Hydraulic fuel Cleanliness Limits of Hydraulic Fluids NAS 1638
Mineral oils Rust-Preventing Characteristics of Mineral Oil ASTM D665
MTBE MTBE Analysis by Gas Chromatography ASTM D5441
Yanbu Branch – OGC
Chemical Testing (OGC Scope)
Petroleum product
Acid or Base Number ASTM D 974 / IP182
Acidity in Aviation Turbine Fuel ASTM D 3242
Acidity of Black Oils ASTM D664
API Gravity at 60 0F ASTM D1298/4052
Ash from Petroleum Products ASTM D482
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 10 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Colour of Petroleum Products - ASTM ASTM D1500
Colour of Petroleum Products (Saybolt Chronometer Method) ASTM D156
Colour Pt-Co ASTM D1209
Conradson Carbon Residue ASTM D189
Copper Strip Corrosion ASTM D130
Copper Strip Corrosion ASTM D1275
Distillation of Petroleum Products ASTM D86
Electrical Conductivity of Aviation and Distillate Fuels ASTM D2624
Existent Gum in Fuels by Evaporation ASTM D381
Flash Point Abel IP170
Flash Point by Pensky-Martens Closed Cup Tester ASTM D93
Freezing Point of Aviation Fuels ASTM D2386
Hydrocarbon Types in Liquid Petroleum Products by F.I.A. ASTM D1319
Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445
Mercaptan Sulphur ASTM D3227
Pour Point of Petroleum Products ASTM D97
Sediment by Extraction ASTM D473
Smoke Point of Aviation Turbine Fuels ASTM D1322
Sulphur in Petroleum Products by XRF Spectroscopy ASTM D4294
Vapor Pressure ASTM D323
Water by Distillation ASTM D95
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 11 of 12
Date: 5 January 2016
Approved by: Brahim Houla
Water by Karl Fischer ASTM D4928
Water by Karl Fischer ASTM D6304
Water Separation Characteristics of Aviation Turbine Fuels ASTM D3948
Total Base Number ASTM D2896
Petrochemicals Acidity of Solvents ASTM D1613
Water by Karl Fischer ASTM E1064
Insulation liquids Water Content ASTM D1533
Breakdown Voltage (1 mm or 2 mm Gap-Mushroom Electrodes) ASTM D1816
Breakdown Voltage ( 2.5 mm Gap-Spherical Electrodes) IEC156
Power Factor @ 25°C / 90°C ASTM D924
INTERFACIAL TENSION ASTM D971
lube oils FOAMING SEQUENCE ASTM D 892
Flash Point COC °C ASTM D92
END
Accreditation Procedures
GAC
10.6 Schedule of Accreditation
Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan
ACCREDITED
TESTING ISO/IEC 17025:2005
No. ATL 0038
Version: 2 Page 12 of 12
Date: 5 January 2016
Approved by: Brahim Houla
SGS Inspections Services Saudi Arabia Ltd
is recorded as issuing GAC accredited reports to organizations in the countries listed below. This list is current at the time of issue of this schedule.
United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen