13/07/15 tech data sheet 20156 - flowtech.co.uk · 13/07/15 tech data sheet 20156. 2 m/1339 general...

2
TECH DATA SHEET 20156 13/07/15

Upload: others

Post on 01-Mar-2021

15 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 13/07/15 TECH DATA SHEET 20156 - flowtech.co.uk · 13/07/15 TECH DATA SHEET 20156. 2 M/1339 General Information Model Type Port size Weight Spares kit (kg) M/1339 Normally closed

TECH DATA SHEET 2015613/07/15

Page 2: 13/07/15 TECH DATA SHEET 20156 - flowtech.co.uk · 13/07/15 TECH DATA SHEET 20156. 2 M/1339 General Information Model Type Port size Weight Spares kit (kg) M/1339 Normally closed

2

M/1339

General InformationModel Type Port size Weight Spares kit

(kg)M/1339 Normally closed or normally open G1/8 0,09 QM/1339/00

Pressure switch

Model Number: M/1339Type: Normally closed or normally open.Common connection marked ‘1’, normallyclosed connection marked ‘2’ and normallyopen connection marked ‘3’ on micro-switch.The four mounting holes are cored to suit M3 x 9 mm long self-tapping screws, suppliedwith unit.The micro-switch may be replaced withanother of the same type without affecting theoperating characteristics of the valve.

26

15 A/F

46

11

8 max.�

12

24

27

32

62

52

71

18�

15�20

G1

8/

Warning

These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceedthose listed under ‘Technical Data’.Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not withinpublished specifications, consult NORGREN MARTONAIR.Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider thefailure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment inthe event of such failure.System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot beadequately provided.System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.

5.10.041.02