14-132 chameleon beanie may flowers - pattern … · 5/14/2014 · microsoft word - 14-132...

www.pattern-‐paradise.com [email protected]

This is an original pattern copyrighted by Pattern Paradise, all rights reserved. Please do not sell, print or distribute this pattern in any form. You are welcome to sell products you make from this pattern, as long as you provide a link back to Pattern Paradise. You may not use the images contained in this pattern. We take great care to make sure these instructions are as accurate as possible – if you find any errors please contact us at [email protected]

1

Materials: Acrylic worsted weight yarn. I used Caron Simply Soft • Main Color (MC) ~100 – 320 yards • Contrast Color (CC) ~40–120 yards • Small amounts of different colors for flowers & stems

• Small buttons for flower centers

Gauge: Hook US H (5.00 mm) 8 hdc, 5 rounds = 2” Hook US G (4.0 mm) Hook US I (5.5 mm)

Size Finished Width

Finished Length*

Newborn – 3 months

12 – 14” 5 ½”

6 -‐ 12 months 15 -‐ 16" 6 ½”

12-‐18 months 17 -‐ 18” 7"

Toddler/Kids 19 -‐ 20" 7 ½”

Adult 22 – 23” 8”

*Length is from crown to bottom of hat.

2

Abbreviations: beg beginning ch chain dc double crochet

hdc half double crochet

sc single crochet

sc2tog Single crochet 2 stitches together

Shell 5 dc in same st sl st slip stitch st(s) Stitch(es) Crab St – reverse single crochet-‐ work sc in each st working from left to right.

Notes: • Weave ends as you work. • Ch1 at beginning of Round

DOES NOT counts as stitch. • Join each round with sl st to

3

beginning stitch. • Fasten off at end of each color

change. • Numbers in ( ) at end of Round

represent the number of stitches in that Round.

• Instructions in [ ] means you work everything in brackets as a set the designated amount of times. Example: [sc, dc, sc] 3 times means you will repeat everything in the [ ] 3 times.

• When a number precedes a stitch you will complete that number of stitches in the next stitch. Example: 3hdc means make 3hdc in the next stitch.

• When a number follows a stitch you will complete that stitch over the number of stitches indicated. Example: hdc 4 means make 1 hdc in the next 4 stitches.

14-‐132 Chameleon Beanie May Flowers.docx

©Pattern Paradise All Rights Reserved -‐ 2 -‐ www.Pattern-‐Paradise.com

Newborn–3 months/Approximately 13-‐14” Crown & Sides -‐ Use Hook US H (5.0 mm) Round 1: With MC, make a Magic Circle, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc) Round 2: Ch1, 2hdc in each st around, join. (16 hdc) Round 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc) Round 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc) Round 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc) Round 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc) Rounds 7 -‐ 9: Ch1, hdc in each st around, join. (48 hdc) Band -‐ Use Hook US I (5.5 mm) Round 1: Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] repeat around, join. (8 Shells) Round 2: Ch3, [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc. Round 3: Repeat Round 2. Round 4: Ch3 (counts as dc), [hdc in next st, sc next 3 sts, hdc next st, dc in next st] around to end, join. Brim -‐ Use Hook US I (5.5 mm) Round 1: Join CC, ch1, sc in same st and each st around, join.

Round 2: Ch4 (counts as dc and ch), dc in same st, [skip 1, (dc, ch1, dc) in next st], to end. Join with sl st to 3rd ch of beg ch4. Round 3: Ch2 (counts as hdc), hdc in each ch space and dc to end, join. Border: Ch1, work Crab St around to end, join. Fasten off 6-‐12 months/Approximately 15-‐16” Crown & Sides -‐ Use Hook US H (5.0 mm) Round 1: With MC, make a Magic Circle, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc) Round 2: Ch1, 2hdc in each st around, join. (16 hdc) Round 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc) Round 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc) Round 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc) Round 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc) Round 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. Your circle should be approximately 5” in diameter. (56 hdc) Rounds 8 -‐11: Ch1, hdc in each st around, join. (56 hdc) Band -‐ Use Hook US I (5.5 mm) Round 1: Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 8 shells made, skip 2,



sc in next, skip 1, Shell in next, skip 1, sc in next, Shell in next, skip last, join. (10 Shells) Round 2: Ch3, [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc. Round 3: Repeat Round 2. Round 4: Ch3 (counts as dc), [hdc in next st, sc next 3 sts, hdc next st, dc in next st] around to end, join. Brim -‐ Use Hook US I (5.5 mm) Round 1: Join CC, ch1, sc in same st and each st around, join. Round 2: Ch4 (counts as dc and ch), dc in same st, [skip 1, (dc, ch1, dc) in next st], to end. Join with sl st to 3rd ch of beg ch4. Round 3: Ch2 (counts as hdc), hdc in each ch space and dc to end, join. Border: Ch1, work Crab St around to end, join. Fasten off 12-‐18 months/Approximately 17-‐18” Crown & Sides -‐ Use Hook US H (5.0 mm) Round 1: With MC, make Magic Circle, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc) Round 2: Ch1, 2hdc in each st around, join. (16 hdc) Round 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc) Round 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc) Round 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)

Round 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc) Round 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc) Round 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. Your circle should be approximately 5 ½” in diameter. (64 hdc) j Rounds 9 -‐12: Ch1, hdc in each st around, join. (64 hdc) Band -‐ Use Hook US I (5.5 mm) Round 1: Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 10 shells made, skip1, sc, skip 1, Shell in next, skip last 2, join. (11 Shells) Round 2: Ch3, [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc. Round 3: Repeat Round 2. Round 4: Ch3 (counts as dc), [hdc in next st, sc next 3 sts, hdc next st, dc in next st] around to end, join. Brim -‐ Use Hook US I (5.5 mm) Round 1: Join CC, ch1, sc in same st and each st around, join. Round 2: Ch4 (counts as dc and ch), dc in same st, [skip 1, (dc, ch1, dc) in next st], to end. Join with sl st to 3rd ch of beg ch4. Round 3: Ch2 (counts as hdc), hdc in each ch space and dc to end, join. Border: Ch1, work Crab St around to end, join. Fasten off



Toddler-‐Kids/Approximately 19-‐20” Crown & Sides -‐ Use Hook US H (5.0 mm) Round 1: With MC, make a Magic Circle, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc) Round 2: Ch1, 2hdc in each st around, join. (16 hdc) Round 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc) Round 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc) Round 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc) Round 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc) Round 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc) Round 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. (64 hdc) Round 9: Ch1, hdc in same st, hdc in next 6 sts, 2hdc in next st, [hdc in next 7 sts , 2hdc in next st] around, join. Your circle should be approximately 6” in diameter. (72 hdc) Rounds 10-‐13: Ch1, hdc in each st around, join. (72 hdc) Band -‐ Use Hook US I (5.5 mm) Round 1: Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] repeat around, join. (12 Shells)

Round 2: Ch3, [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc. Round 3: Repeat Round 2. Round 4: Ch3 (counts as dc), [hdc in next st, sc next 3 sts, hdc next st, dc in next st] around to end, join. Brim -‐ Use Hook US I (5.5 mm) Round 1: Join CC, ch1, sc in same st and each st around, join. Round 2: Ch4 (counts as dc and ch), dc in same st, [skip 1, (dc, ch1, dc) in next st], to end. Join with sl st to 3rd ch of beg ch4. Round 3: Ch2 (counts as hdc), hdc in each ch space and dc to end, join. Border: Ch1, work Crab St around to end, join. Fasten off Adult/Approximately 22-‐23” Crown & Sides -‐ Use Hook US H (5.0 mm) Round 1: With MC, make a Magic Circle, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc) Round 2: Ch1, 2hdc in each st around, join. (16 hdc) Round 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc) Round 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc) Round 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc) Round 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around,



join. Your circle should be approximately 4 ½” in diameter. (48 hdc) Round 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc) Round 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. (64 hdc) Round 9: Ch1, hdc in same st, hdc in next 6 sts, 2hdc in next st, [hdc in next 7 sts , 2hdc in next st] around, join. Your circle should be approximately 6” in diameter. (72 hdc) Round 10: Ch1, hdc in same st, hdc in next 7 sts, 2hdc in next st, [hdc in next 8 sts , 2hdc in next st] around, join. Your circle should be approximately 6 3/4" in diameter. (80 hdc) Rounds 11-‐15: Ch1, hdc in each st around, join. (80 hdc) Band -‐ Use Hook US I (5.5 mm) Round 1 Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 12 shells made, sc in next, skip 1, Shell in next, skip 1, sc in next, skip 1, Shell in next, skip last, join. (14 Shells) Round 2: Ch3, [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc. Round 3: Repeat Round 2. Round 4: Ch3 (counts as dc), [hdc in next st, sc next 3 sts, hdc next st, dc in next st] around to end, join. Brim -‐ Use Hook US I (5.5 mm) Round 1: Join CC, ch1, sc in same st and each st around, join.

Round 2: Ch4 (counts as dc and ch), dc in same st, [skip 1, (dc, ch1, dc) in next st], to end. Join with sl st to 3rd ch of beg ch4. Round 3: Ch2 (counts as hdc), hdc in each ch space and dc to end, join. Round 4: Ch2, hdc in each st to end, join. Border: Ch1, work Crab St around to end, join. Fasten off

Fun Decorations -‐ Hook US G (4.00 mm) Make as many flowers as you like. Bizzy Lizzy: Make a Magic Circle, ch1 [hdc, dc, 2tr, dc, hdc] 5 times, join with sl st to beg hdc. Fasten off. Pull tail to close center of flower. If desired, sew a button or pearl to center.

Daisy:Make a Magic Circle, ch1, 12 sc in center, join with sl st to beg sc. Pull tail to closer center of flower. [ch6, sl st in next 2 sts]. Fasten off.



Tulip: Round 1: Make a Magic Circle, ch1, 9hdc in center, join. Round 2: Ch1, hdc in each st to end, join. (9 hdc)

Round 3: Ch1, 2 hdc in same st, [hdc next 2 sts, 2hdc in next st], repeat to last 2 sts, hdc in last 2 sts, join. Round 4: Ch1, [(hdc, dc, ch2, sl st in top of dc, hdc) in next st, sl st In next st], repeat to end. Join with sl st to first ch1. Rose:

Row 1: Ch16, sc in 3rd st from hook and each remaining ch. (14 sc)

Row 2: Ch1, sc in same st, [5dc in next st, sl st in next st], repeat to end, sl st in last st. Fasten off leaving a 12” strand to sew twists in place. Thread the yarn

needle with the 12” strand, start twisting the end to form a rose bud and tack across back to hold in place. Continue until end of piece.

To Finish Hat: With yarn hook, embroider various size stems around hat. Work blades of grass or leaves on stems as desired. Sew flowers in place. Decorate as desired with buttons or other appliques.

14-132 chameleon beanie may flowers - pattern … · 5/14/2014 · microsoft word - 14-132...

Documents